Sonata Std turns to Myriad !
I have A serious problem?? Everytime I use type tool in illustrator CS4 and choose Sonata Std font as a direct font for use and start typing, Illustrator switches this font to Myriad pro. Ok ! I can get the symbols from glyphs by clicking the symbol but it is not the same thing. It is very "slow" way to write musical symbols into my work.
Y: Mikko
What are your language & region settings? Have you tried inserting those characters via your keyboard/ charmap utility? What is your default language/ encoding/ compatibility setting in Word? Definitely some sort of Unicode issue...
Mylenium
Similar Messages
-
Problems installing Sonata Std font for use in Word 2011 for Mac
I just purchased and installed Sonata Std font (downloaded from the Adobe website) for use on my 2009 MacBook, running OSX 5.8. I'm trying to use the font in MS Word for Mac 2011. Sonata Std is now showing up in the list of available fonts within Word, but when I select the font and go to type in characters within the font (such as flat and sharp signs, using the proper keystrokes), the characters are not displaying correctly (not at all, in fact — I get a series of boxy-looking glyphs rather than proper music accidentals). Are there any additional steps that I need to do in order to install the font and get it to work properly in Word?
What are your language & region settings? Have you tried inserting those characters via your keyboard/ charmap utility? What is your default language/ encoding/ compatibility setting in Word? Definitely some sort of Unicode issue...
Mylenium -
Problem installing downloaded 'Sonata std medium' font on Win7
I have downloaded the Sonata font from Adobe Shop, unzipped it, right clicked on SonataStd.oft and installed it, but it isn't working or showing as a music font.
I looked at the properties, clicked the ‘unblock’ option, but it made no difference.
I assume there is a security setting blocking it, can anyone give me a clue as to what or where? It works perfectly well on my winXP computer.
Thank youPengey I believe I have discovered a way to verify your font is installed and functioning properly. I was able to complete the following steps on a Windows 7 computer.
Go to Start>Accessories>System Tools>Character Map
Select the Sonata Std font
Choose the option for Advanced View
For the Group By option choose Unicode Subrange
Select Symbols & Dingbats from the Group by Dialog - see screenshot below
Click on one of the music symbols - U + 2669 Quarter Note for example
Double click on the Symbol so it appears in the Character to Copy box
Click the Select Button followed by the copy button - this will copy the glyph to your clipboard
Press the Windows key and R to invoke the run dialog box
Type in Wordpad and press ok
Press Control - V to paste the symbol in. It should now become visible in Wordpad
This will allow you access and view the extended character. I tried this in Fireworks btw and it does appear that Fireworks CS4 is unable to support the extended character set. Instead of viewing the music symbols I was only able to see boxes with X's through them. I did also try the latest version of Fireworks and it appears it has a similar limitation.
If you are looking for an Adobe Application which does support Sonata Std I would recommend Illustrator for your graphic creation needs. It might also be worthwhile to post in the Fireworks forum as well. The users in that forum maybe aware of a workaround to allow the ability to access extended characters within Fireworks. http://forums.adobe.com/community/fireworks/fireworks_general -
I have downloaded and extracted the Adobe Design Std CS 6 (Windows,Universal English), but when I try to install the message "installer failed to initialize" appears. I have tried doing everything on the http://forums.adobe.com/message/4430971 forum, but no good. I unintalled CS 5.5 okay, still no good. I can install CS 5.5 okay, but not CS 6.
I had a similar problem.
Day 1:
I had to download CS6 Master collection at home and sneaker net it on a USB stick to install at my office.
Day 2:
I brought in the ZIP file and encountered errors with the .7z file.
Day 3:
I unzipped at home and copied the .7z file and .exe file to the stick. Still unable to run Set-up.exe
[It turned out not all files were being extracted]
Adobe advisor program reported:
"cpsid_82829s5: "Missing installation file," bootstrapper error has occurred."
Day 4:
extracted all files on home computer and copied all directories/files to USB.
Copied to other computer and told it to merge with existing files (to save time) - not to copy duplicates.
Same error message. [Turned out myriads of files that were not missing were actually incomplete as well.]
Copied again-- told Windows to overwrite all files this time and I proceeded to install successfully.
On each iteration,I used the same 32GB USB stick (formatted to NTFS to allow for the 6 GB file size) for all transfers.
My only guess is that the large file was not handled properly being copied to/from the USB stick. After being unzipped,
the .7z File was still 6 GB and appeared to unpack, but must have been corrupted. -
Sonata font does not work in MS word, windows 7
I purchased and downloaded Sonata Std. from Adobe. I downloaded it and installed it. I want to use it in Microsoft Word (Office 2013) - Windows 7. When I open a Word document, the Sonata Std. font name appears in the font select window, but after I select it and go to the document to begin typing, it reverts back to some other standard font (Cambria or Times New Roman).
It does not seem to work at all. This is very troubling, since I paid $30 for it.
Please help!You need to install the custom keyboard layout that shipped with the font.
Add or change an input language -- Windows 7 -
[solved] Sonata & crossfading problem
Everytime when I enable crossfading in Sonata it turns off after computer restart
How can I solve this?
Maybe crossfading should be enabled directly in mpd.conf?
Last edited by arox1 (2007-03-18 14:55:45)Actually, you want to ensure that mpd saves its state. Uncomment the state_file line in the mpd.conf.
(Sonata used to overrule mpd and dictate whether xfade/repeat/shuffle/etc were set, but I got a lot of feedback that people didn't like this because it doesn't play well with other clients. So now Sonata tells mpd once to enable xfade and then relies on mpd correctly saving this information.) -
Missing fonts auto replacement
Hi,
Please help me with my font issue.
When I open *.psd file in Photoshop Elements 10 it gives me warning message about font Helvetica I have used.
I know that the Helvetica fonts have already been added to the Photoshop font list.
Here is a warning message:
That happens because the original Text layer has been created using Helvetica fonts.
If I navigate to Layer>Type>Replace Missing Fonts PE10 replaces them to "Myriad Pro" instead of "Helvetica".
If I ignore warning and navigate to layer with missing fonts PE10 popups this warning message:
"The following fonts are missing for text layer "layername":
HelveticaNeueCE Bold
Font substitution will occur. Continue? "
When I am hitting "Continue" button PE10 replaces font to "Myriad Pro". Same replacement occurs with HelveticaNeue Roman.
After that I have to manually change font type of this layer to "Helvetica Neue LT Std".
I have checked what Helvetica fonts are installed in the Windows, here is a list:
Helvetica Neue LT Std 45 Light
Helvetica Neue LT Std 75 Bold
Helvetica Neue LT Std 85 Heavy
How to force PE10 to automatically replace fonts to "Helvetica Neue LT Std" instead of "Myriad Pro"?
Why does Photoshop ignore a font installed in the font directory?
Kind Regards,
Egor.Form my understanding you can't replace missing fonts until the document is open. To avoid the missing fonts modal dialog, you can set
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
before opening the document and then make your font substitutions. Don't forget to reset the userInteractionLevel when your script is done! -
Fireworks TO Photoshop integration issues
I love designing my websites in Fireworks, however most of
the developers I work with want layered PSD documents to develop
with (don't ask me why, its a whole other discussion entirely).
Needless to say I was thrilled when rumours came about that
Fireworks CS3 offered 'full' integration with Photoshop CS3. It
will be my main reason to upgrade from studio 8.
Luckily I downloaded the trial version of both programs first
only to find the integration from fireworks TO psd file very poor.
Granted, the fact that layers are exported is a big plus but
the way texts are handled is a nightmare.
When I turn a fireworks document into a *.psd file and open
that document into Photoshop the following happens (this, ofcourse,
only happens when I update the textlayers):
> line distance in pixels is not supported by photoshop:
it turns the lading into huge distances (24px --> 450pt)
> different colors / fonts / styles are not supported: it
tuns the whole textfield in to a similar color / font / style
> All fonts dissapear and the test is set in Myriad!!
Ieven when I use Arial)
This is a major dissapointment for me, not too mention that
it creates a lot of extra work.
I hope it's something I do wrong, I find it hard to believe
that the (text) integration between fireworks and photoshop has
become worse than before.. but it does seems this way.
Tips, ideas, work arounds are -very- welcome
for your information:
I'm running a macbook pro 2.3 Ghz, 2Gb and 256Mb
videocardFirst of all, good for you for testing out the trial first!
I understand there were technical issues in getting the Adobe
Font
rendering engine to work reliably in FW CS3 so unfortunately,
text
problems still exist.
In reality, the integration seems to be more of a one-way
street, from
PS to FW for this version.
Maybe it's on the PS receiving end, or maybe on the FW export
side.
Integration IS better, but it still has a ways to go. If you
read
somewhere on Adobe's site that there is FULL integration, I'd
put in a
call to customer support. That's the marketing people talking
without
thinking.
A couple suggestions that may not be feasible for your
workflow.
If the text is "locked in" in terms of it not requiring
editing in PS
you could try NOT updating the fonts
OR
In FW render the fonts as paths, export the file as a PSD,
and don't
save the converted PNG, so your text remains editable withing
FW.
These may not be practical options for you, but other than
doing all the
text in PS, it might be the only way at the moment.
That said, there are still many great features in FW CS3. If
the
integration is your only buy-in feature, though, that may not
be enough.
FW is much more akin to Illustrator than it is Phostoshop, so
it's hard
to predict when there will be FULL integration.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver
Martijnhinfelaar wrote:
> To add to the confusion (and frustration)
> The issue of all fonts turning into Myriad doesn't
happen when I open my PSD
> file (exported from FW CS3) in Photoshop CS2....
>
> So is this a 'bug' in Ps CS 3 or am I doing something
wrong? I hope it's the
> latter!
> -
It seems that you (Adobe) have added fonts (Adobe Devanagari, Adobe Gurmukhi, Adobe Fan Heiti Std, Myriad Arabic, Myriad Hebrew) to my system, that I can't easily remove and it is quite frustrating as they appear every time I am looking for fonts and yet I will never really need them. I have cleaned all my fonts on my system, keeping it ultra lean, and only activating the sets I need when I am working on projects and I would appreciate if you could tell me where they are and how I can remove them? Many Thanks James
Hey, I managed to remove them by deleting "typesupport" folder in C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required
I'm not sure if there will be unexprected problems, but you can move the folder somewhere else. -
Problems concerning sonata playlists and freevo cover art
Hi!
I'm setting up a media center PC and I'm having some problems with the playlists created by sonata. Another problem I have is not getting freevo to download cover art.
First: When ever I try to make a playlist through the "Current" tab in Sonata it creates a m3u file with every song that's listed in the current window. I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata? And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Second: I'm having big problems getting freevo to download cover art to my music. I can download info on movies from imdb, but info for the music doesn't work. I store the cover art downloaded by sonata in the different album folders and these covers show up in freevo. But if I have to play every new song i download first in sonata to get the cover art working in freevo I'll go crazy. It's supposed to work the same way in freevo as in sonata isn't it???
It also seems that mplayer can't play m3u files. Using the mentioned sonata made m3u file in mplayer does nothing. Mplayer starts but nothing happens.
My goal is to be able to make playlists through sonata and then play these lists using freevo. I don't want to get up from the couch.
Here's my local_conf.py:
# -*- coding: iso-8859-1 -*-
# local_conf.py - System configuration
# $Id: local_conf.py.example 10508 2008-03-12 07:24:34Z duncan $
# Notes:
# This file contains your freevo settings, overriding the settings in
# freevo_config.py. freevo_config.py, which is usually installed in
# /usr/share/freevo, contains all the core settings. To change the settings copy
# this file to ~/.freevo/local_conf.py or /etc/freevo/local_conf.py
# It does not contain all the possible settings that you can change, see
# freevo_config.py for all the possible settings. Also it does not contain
# settings for the plug-ins, plug-ins contain their configuration information and
# the can be listed with:
# | freevo plugins -l
# and the settings can se shown with
# | freevo plugins -i <name of plug-in>
# E.g.: when you want a alsa as mplayer audio out, just put in local_conf.py:
# | MPLAYER_AO_DEV = 'alsa9'
# The vertical line indicates code.
# This is no normal config file, it's Python code. Because of that, you
# need to follow some rules to avoid crashes. The examples should explain
# the settings, but make sure a line starting with a variable has NO SPACES OR
# TABS at the beginning.
# Freevo - A Home Theater PC framework
# Copyright (C) 2002 Krister Lagerstrom, et al.
# Please see the file freevo/Docs/CREDITS for a complete list of authors.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MER-
# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
CONFIG_VERSION = 5.23
# ======================================================================
# General freevo settings:
# ======================================================================
# LOCALE='iso-8859-15'
# AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# MIXER_MAJOR_CTRL = 'VOL' # Freevo takes control over one audio ctrl
# 'VOL', 'PCM' 'OGAIN' etc.
# MIXER_MAJOR_MUTE_CTRL = 'PCM' # used in alsamixer.py There are systems where
# volume and mute use different controls
# MIXER_DEVICE = '/dev/mixer' # mixer device
# MIXER_CONTROL_ALL = 1 # Should Freevo take complete control of audio
# MIXER_VOLUME_MAX = 90 # Set what you want maximum volume level to be.
# MIXER_VOLUME_DEFAULT = 40 # Set default volume level.
# MIXER_VOLUME_TV_IN = 60 # Set this to your preferred level 0-100.
# MIXER_VOLUME_VCR_IN = 90 # If you use different input from TV
# MIXER_VOLUME_RADIO_IN = 80 # Set this to your preferred level 0-100.
START_FULLSCREEN_X = 1 # Start in fullscreen mode if using x11 or xv.
# SYS_SHUTDOWN_CONFIRM = 1 # ask before shutdown
# Physical ROM drives, multiple ones can be specified
# by adding comma-seperated and quoted entries.
# Format [ ('mountdir1', 'devicename1', 'displayed name1'),
# ('mountdir2', 'devicename2', 'displayed name2'), ...]
# Set to None to autodetect drives in during startup from /etc/fstab,
# set to [] to disable rom drive support at all
# ROM_DRIVES = None
# Hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs.
HIDE_UNUSABLE_DISCS = 1
# Attempt to set the speed of the ROM drive. A good value for keeping the
# drive silent while playing movies is 8.
# ROM_SPEED = 0
# Perform a whole system shutdown at SHUTDOWN! Useful for standalone boxes.
# SYS_SHUTDOWN_ENABLE = 0
# Command to execute to shutdown the system
# SYS_SHUTDOWN_CMD = "sudo shutdown -h now"
# SYS_RESTART_CMD = "sudo shutdown -r now"
# ======================================================================
# AUTOSHUTDOWN CONFIGURATION
# ======================================================================
# replace the default shutdown plugin
# plugin.remove('shutdown')
# plugin.activate('autoshutdown', level=90)
# activate the timer
# plugin.activate('autoshutdown.autoshutdowntimer')
# -- autoshutdown menu item configuration --
# SYS_SHUTDOWN_CONFIRM
# Set to True to popup dialog boxes for confirmation.
# this applies to menu items only.
# AUTOSHUTDOWN_CONFIRM = True
# -- autoshutdown timer configuration --
# TIMER_TIMEOUT
# Set the timeout in minutes after which the system
# is shutdown. The allowed idle time and the running
# processes (see below) are evaluated to determine if
# a shutdown is allowed. Menu navigation in freevo will
# reset the timer.
# AUTOSHUTDOWN_TIMER_TIMEOUT=30
# -- autoshutdown behaviour configuration --
# PRETEND
# Set to True to disable the actual shutdown command.
# AUTOSHUTDOWN_PRETEND = False
# PROCESS_LIST
# List the processes that will prevent an automatic
# shutdown. If there are important programs that
# should not be interrupted, then add them to this
# list. Set to None if a shutdown is always allowed.
# AUTOSHUTDOWN_PROCESS_LIST = [
# 'emerge',
# 'tvgids',
# 'transcode',
# 'cdrecord',
# 'mplayer',
# 'top'
# DEFAULT_WAKEUP_TIME
# Set the default time at which to wakeup if there
# are no recordings scheduled. The time is specified
# in localtime 24 hour format. Set to None to disable
# default wakeup time.
# AUTOSHUTDOWN_DEFAULT_WAKEUP_TIME = "13:00"
# FORCE_DEFAULT_WAKEUP
# Set to True to always wakeup at the default wakeup
# time. Set to False to only wakeup at the default
# wakeup time when no recordings are scheduled.
# AUTOSHUTDOWN_FORCE_DEFAULT_WAKEUP = True
# ALLOWED_IDLE_TIME
# The number of minutes that may be spent idle until
# the next scheduled recording or default wakeup. That
# is, if the gap between "now" and the next recording
# or default wakeup is less than the allowed idle time
# then a shutdown is not performed but the system is
# left running. If the period from now to the next
# recording or default wakeup is more than the allowed
# idle time, then the system is shut down and a wakeup
# is scheduled. Use this to minimize the number of
# shutdown/boot sequences when many short programs are
# recorded in a short period of time. Note that this
# variable is used by both the timer and the menu.
# AUTOSHUTDOWN_ALLOWED_IDLE_TIME = 45
# -- Choice of wakeup method
# The wakeup can be done via acpi-alarm or nvram-wakeup.
# AUTOSHUTDOWN_METHOD = 'acpi'
# AUTOSHUTDOWN_METHOD = 'nvram'
# -- autoshutdown acpi-alarm configuration
# This method uses the wakeup on alarm function that most BIOSs have.
# The wakeup time is set by a simple
# "echo 2004-08-02 20:15:00 >/proc/acpi/alarm"
# On most mainbords you will have to ENABLE "Wake on Timer", "Resume on Alarm",
# "RTC Alarm Resume" or similar things for the acpi wakeup method to work.
# If you want to use acpi, you need to create a small script:
# !/bin/sh
# echo "$1" >/proc/acpi/alarm
# You have to be root or use sudo for this to work.
# AUTOSHUTDOWN_WAKEUP_CMD = sudo /PATH/TO/set_acpi.sh
# -- autoshutdown nvram-wakeup configuration --
# The nvram-wakeup utility is used to write the
# wakeup alarm to the RTC in bios. Read the
# nvram-wakeup documentation about this topic,
# a working nvram-wakeup configuration is needed.
# WAKEUP_CMD / NVRAM_OPT
# Path to nvram-wakeup and options. Options can
# be used to specify a config file.
# AUTOSHUTDOWN_WAKEUP_CMD = "/usr/bin/nvram-wakeup"
# AUTOSHUTDOWN_NVRAM_OPT = "--syslog"
# WAKEUP_NEEDS_REBOOT
# Set to True if the bios needs a reboot to catch
# up with the rtc alarm that nvram-wakeup sets. The
# boot loader options should be set too. Read the
# nvram-wakeup documentation about this topic.
# AUTOSHUTDOWN_BIOS_NEEDS_REBOOT = True
# -- if the bios needs a reboot --
# BOOT_LOADER
# Set to "GRUB" or "LILO" Only needed if bios needs
# a reboot to initialize the RTC wakeup call.
# AUTOSHUTDOWN_BOOT_LOADER = "GRUB"
# REMOUNT_BOOT_CMD / REMOUNT_BOOT_OPT
# Grub needs to write to /boot/grub/grub.conf. Set
# the command and options to remount the /boot
# partition writeable. Set to None if this is not
# needed.
# AUTOSHUTDOWN_REMOUNT_BOOT_CMD = "/bin/mount"
# AUTOSHUTDOWN_REMOUNT_BOOT_OPT = "/boot -o remount,rw"
# GRUB_CMD / GRUB_OPT
# Grub-set-default command and options that will
# reboot and poweroff the system.
# AUTOSHUTDOWN_GRUB_CMD = "/sbin/grub-set-default 0"
# AUTOSHUTDOWN_GRUB_OPT = "0"
# LILO_CMD / LILO_OPT
# Lilo command with options that will reboot and
# poweroff the system.
# AUTOSHUTDOWN_LILO_CMD = "/sbin/lilo"
# AUTOSHUTDOWN_LILO_OPT = "-R PowerOff"
# ======================================================================
# Events
# ======================================================================
# You can add more keybindings by adding them to the correct hash.
# e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key,
# just add the following line:
# EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')
# See src/event.py for a list of all possible events.
# Some events to jump to menus
# EVENTS['menu']['GUIDE'] = Event(MENU_GOTO_TVGUIDE) # Not working
# EVENTS['menu']['VIDEOS'] = Event(MENU_GOTO_VIDEOS)
# EVENTS['menu']['MUSIC'] = Event(MENU_GOTO_MUSIC)
# EVENTS['menu']['PICTURES'] = Event(MENU_GOTO_IMAGES)
# EVENTS['menu']['GAMES'] = Event(MENU_GOTO_GAMES)
# EVENTS['menu']['RADIO'] = Event(MENU_GOTO_RADIO) # Not working
# EVENTS['menu']['POWER'] = Event(MENU_GOTO_SHUTDOWN)
# Use arrow keys for back and select (alternate way of navigating)
# MENU_ARROW_NAVIGATION = False
# Process keyboard events from SDL. You want this unless you use only lirc
# or event devices below.
# USE_SDL_KEYBOARD = True
# Keymap to map keyboard keys to event strings. You can also add new keys
# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.
# List of /dev/input/event# devices to monitor. You can specify either the
# device node (e.g. '/dev/input/event1') or the name of the device (e.g.
# 'ATI Remote Wonder II'). If you monitor your keyboard both here and with
# USE_SDL_KEYBOARD, then you will get duplicate events.
EVENT_DEVS = []
# Keymap to map input events to event strings. You can change current mappings
# and add new ones here, e.g. EVENTMAP['KEY_COFFEE'] = 'SUBTITLE'. Key names
# are defined by the Linux input layer (input.h). An axis is described by a
# pair, one for positive and one for negative movement, e.g.
# EVENTMAP['REL_Z'] = ('LEFT', 'RIGHT')
# Use Internet resources to fetch information?
# For example, Freevo can use CDDB for album information,
# the IMDB movie database for movie info, and Amazon for cover searches.
# Set this to 0 if your computer isn't connected to a network.
USE_NETWORK = 1
# Directory location to save files when the normal filesystem
# doesn't allow saving. This directory can save covers and fxd files
# for read only filesystems like ROM drives. Set this variable to your
# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory
# Freevo can write to.
# OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')
# Umask setting for all files.
# 022 means only the user has write access. If you share your Freevo
# installation with different users, set this to 002
# UMASK = 022
# Suffix for playlist files
PLAYLIST_SUFFIX = [ 'm3u' ]
# Use md5 in mmpython to create unique disc ids. Enable this if you have
# problems with different discs having the same id.
# MMPYTHON_CREATE_MD5_ID = 0
# Keep metadata in memory
# Setting this variable will keep all cache files in memory. Startup will be
# slower, but for large directories, this will speed up the display.
# 0 = Only keep current dir in memory. Use this if you have too much data
# and not enough RAM
# 1 = Once loaded, keep cachefile for directory in memory
# 2 = Load all cachefiles on startup
# WARNING: you should not run 'freevo cache' when freevo is running.
# MEDIAINFO_USE_MEMORY = 1
# Cache images. This uses a lot of disc space but it's a huge speed
# enhancement. The images will be cached in OVERLAY_DIR
CACHE_IMAGES = 1
# ======================================================================
# Plugins:
# ======================================================================
# Remove undesired plugins by setting plugin.remove(code).
# You can also use the name to remove a plugin. But if you do that,
# all instances of this plugin will be removed.
# Examples:
# plugin.remove(plugin_tv) or
# plugin.remove('tv') will remove the tv module from the main menu
# plugin.remove(rom_plugins['image']) will remove the rom drives from the
# image main menu,
# plugin.remove('rom_drives.rom_items') will remove the rom drives from all
# menus
# See freevo_config.py for a list of loaded plugins
plugin.remove('tv')
plugin.remove('headlines')
plugin.remove('idlebar.tv')
plugin.remove('idlebar.diskfree')
plugin.remove('file_ops')
plugin.remove('tv.generic_record')
plugin.remove('tv.view_recordings')
plugin.remove('tv.mplayer')
plugin.remove('tv.manual_record')
plugin.remove('tv.scheduled_recordings')
plugin.remove('tv.view_favorites')
plugin.remove('video.moviecovers')
# User setup
plugin.activate('audio.coversearch')
# plugin.activate('video.moviecovers')
plugin.activate('video.details')
# list of regexp to be ignored on a disc label
IMDB_REMOVE_FROM_LABEL = ('season[\._ -][0-9]+', 'disc[\._ -][0-9]+',
'd[\._ -][0-9]+', 'german')
# list of words to ignore when searching based on a filename
IMDB_REMOVE_FROM_SEARCHSTRING = ('the', 'a')
# When searching for a movie title in imdb, should the result be
# autoaccepted if it is only one hit?
# 0 = show menu even if it is only one hit (gives you an opportunity to cancel)
# 1 = autoaccept
IMDB_AUTOACCEPT_SINGLE_HIT = 1
SCREENSAVER_DELAY = 30 # of seconds to wait to start saver.
SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
plugin.activate('screensaver')
# Use ivtv_record instead if you have an ivtv based card (PVR-250/350)
# and want freevo to do everthing for you. TV_SETTINGS must be set
# correctly. To use you need to set the following two lines:
# plugin.remove('tv.generic_record')
# plugin_record = plugin.activate('tv.ivtv_record')
# Enable this for joystick support:
# plugin.activate('joy')
# Headlines
# You are free to use any rss feeds in the HEADLINES_LOCATIONS below
# These are just working examples for the Freevo feeds.
# To turn off Headlines add plugin.remove('headlines')
# plugin.activate('headlines', level=45)
# HEADLINES_LOCATIONS = [
# ('Freevo news releases', 'http://sourceforge.net/export/rss2_projnews.php?group_id=46652'),
# ('Freevo file releases', 'http://sourceforge.net/export/rss2_projfiles.php?group_id=46652'),
# ('Freevo summary+stats', 'http://sourceforge.net/export/rss2_projsummary.php?group_id=46652'),
# ('Freevo donors', 'http://sourceforge.net/export/rss2_projdonors.php?group_id=46652'),
# CD Ripping
# CD_RIP_TMP_DIR = '/tmp/'
# CD_RIP_TMP_NAME = 'track_%(track)s_being_ripped'
# CD_RIP_PN_PREF = '%(artist)s/%(album)s/%(track)s - %(song)s'
# CD_RIP_CDPAR_OPTS = '-s'
# CD_RIP_LAME_OPTS = '--vbr-new -b 192 -h'
# CD_RIP_OGG_OPTS = '-m 128'
# CD_RIP_FLAC_OPTS = '-8'
# CD_RIP_CASE = None # Can be title, upper, lower
# CD_RIP_REPLACE_SPACE = None # Can be '_', '-', etc.
# CD Burning
# CDBURN_AUDIO_DAO = 1
# CDBURN_MKISOFS_PATH = '/usr/bin/mkisofs'
# CDBURN_CDRECORD_PATH = '/usr/bin/cdrecord'
# CDBURN_TEMP_DIR='/tmp/'
# CDBURN_DEV = '/dev/cdrom'
# CDBURN_SPEED = 32
# Re-encode
# This plug-in transcodes a video to a different format
# plugin.activate('video.reencode')
# REENCODE_CONTAINER = 'avi'
# REENCODE_RESOLUTION = 'Optimal'
# REENCODE_VIDEOCODEC = 'XviD'
# REENCODE_VIDEOBITRATE = 1000
# REENCODE_AUDIOCODEC = 'MPEG 1 Layer 3 (mp3)'
# REENCODE_AUDIOBITRATE = 128
# REENCODE_NUMPASSES = 1
# REENCODE_VIDEOFILTER = None
# Freevo Music Player Daemon
# http://www.musicpd.org/
# plugin.activate('mpd')
# Freevo Bluetooth Phone Settings
# This plugin uses The Python bindings for Bluez bluetooth stack.
# It can be downloaded from http://org.csail.mit.edu/pybluez/download.html
# or installed with the package manager of your operating system.
# To this plugin to work you need the j2me midlet installed in a compatible
# phone.
# plugin.activate('freevused')
# if RFCOMM port is already binded wait this seconds to retry binding
# FVUSED_BIND_TIMEOUT = 30
# Translation of commands from j2me client to events of Freevo
# FVUSED_CMDS = {
# 'PREV': 'UP', # 1st row left
# 'STRT': 'SELECT', # 1nd row center
# 'NEXT': 'DOWN', # 1st row right
# 'RWND': 'LEFT', # 2nd row left
# 'PAUS': 'PAUSE', # 2nd row center
# 'FFWD': 'RIGHT', # 2nd row right
# 'VOL-': 'MIXER_VOLDOWN', # 3rd row left
# 'STOP': 'EXIT', # 3rd row center
# 'VOL+': 'MIXER_VOLUP', # 3rd row right
# 'VOLM': 'MIXER_VOLMUTE', # 4th row left
# 'SLCT': 'ENTER', # 4th row center
# 'MAIN': 'MENU' # 4th row right
# Freevo Button Bar Plug-in
# plugin.activate('buttonbar')
# You'll also need to map the 'RED', 'GREEN', 'YELLOW'
# and 'BLUE' events to keys for example (don't use this
# it overrides some default keys)
# KEYMAP[key.K_F5] = 'RED'
# KEYMAP[key.K_F6] = 'GREEN' #Already mapped to record
# KEYMAP[key.K_F7] = 'YELLOW'
# KEYMAP[key.K_F8] = 'BLUE'
# Freevo Screensaver Plug-in
# SCREENSAVER_DELAY = 120 # of seconds to wait to start saver.
# SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
# plugin.activate('screensaver')
# plugin.activate('screensaver.balls') # Bouncing balls all over the screen
# plugin.activate('screensaver.bouncing_freevo') # The freevo logo bouncing around the screen
# ======================================================================
# Freevo directory settings:
# ======================================================================
# You can change all this variables in the folder.fxd on a per folder
# basis
# Example:
# <freevo>
# <folder title="Title of the directory" img-cover="nice-cover.png">
# <setvar name="directory_autoplay_single_item" val="0"/>
# <info>
# <content>A small description of the directory</content>
# </info>
# </folder>
# </freevo>
# Should directories sorted by date instead of filename?
# 0 = No, always sort by filename.
# 1 = Yes, sort by date
# 2 = No, don't sory by date for normal directories,
# but sort by date for TV_RECORD_DIR.
DIRECTORY_SORT_BY_DATE = 0
# Should directory items be sorted in reverse order?
# DIRECTORY_REVERSE_SORT = 0
# Should we use "smart" sorting?
# Smart sorting ignores the word "The" in item names.
DIRECTORY_SMART_SORT = 1
# Should files in directories have smart names?
# This removes the first part of the names when identical
# DIRECTORY_SMART_NAMES = 1
# Should Freevo autoplay an item if only one item is in the directory?
DIRECTORY_AUTOPLAY_SINGLE_ITEM = 0
# Force the skin to use a specific layout number. -1 == no force. The layout
# toggle with DISPLAY will be disabled
# DIRECTORY_FORCE_SKIN_LAYOUT = -1
# Format string for the audio item names.
# Possible strings:
# a=artist, n=tracknumber, t=title, y=year, f=filename
# Example:
# This will show the title and the track number:
# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'
# DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'
# Use media id tags to generate the name of the item. This should be
# enabled all the time. It should only be disabled for directories with
# broken tags.
DIRECTORY_USE_MEDIAID_TAG_NAMES = 1
# The following settings determine which features are available for
# which media types.
# If you set this variable in a folder.fxd, the value is 1 (enabled)
# or 0 (disabled).
# Examples:
# To enable autoplay for audio and image files:
# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]
# To disable autoplay entirely:
# DIRECTORY_AUTOPLAY_ITEMS = []
# Make all items a playlist. So when one is finished, the next one will
# start. It's also possible to browse through the list with UP and DOWN
# DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ]
# Add playlist files ('m3u') to the directory
# DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ]
# Add the item 'Random Playlist' to the directory
# DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]
# Make 'Play' not 'Browse' the default action when only items and not
# subdirectories are in the directory
# DIRECTORY_AUTOPLAY_ITEMS = [ ]
# ======================================================================
# Freevo movie settings:
# ======================================================================
# Where the movie files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
VIDEO_ITEMS = [
('movies', '/home/per/movies'),
('movies extra', '/extra/movies'),
('tv', '/home/per/tv'),
('tv extra', '/extra/tv'),
# Some people access movies on a different machine using an automounter.
# To avoid timeouts, you can specify the machine name in the directory
# to check if the machine is alive first
# Directory myserver:/files/server-stuff will show the item for the
# directory /files/server-stuff if the computer myserver is alive.
# The list of filename suffixes that are used to match the files that
# are played wih MPlayer.
# VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm',
# 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p',
# 'mp4', 'viv', 'nuv', 'mov', 'iso',
# 'nsv', 'mkv' ]
# The list of filename suffixes that are used to match the files that
# are played wih Xine.
# VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm',
# 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue' ]
# Preferred video player
VIDEO_PREFERED_PLAYER = 'mplayer'
# Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing
# information about a disc. If you only have the fxd files for discs in
# one of this directories (and subdirectories), set this to 1, it will
# speed up startup, 0 may be needed if you have fxd files with disc links
# in your normal movie tree.
# VIDEO_ONLY_SCAN_DATADIR = 1
# try to detect a movie with more than one file and join them as one
# item
VIDEO_AUTOJOIN = 1
# try to find out if deinterlacing is needed or not
# VIDEO_DEINTERLACE = None
# Instruct player to use XVMC for playback
# VIDEO_USE_XVMC = None
# Pass field dominance parameter to MPlayer
# VIDEO_FIELD_DOMINANCE = None
# PRE and POST playing commands. Set these to a runnable command if
# you wish to do something before and after playing a video, like
# dimming the lights
# VIDEO_PRE_PLAY = None
# VIDEO_POST_PLAY = None
# ======================================================================
# Freevo audio settings:
# ======================================================================
# Where the Audio (mp3, ogg) files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
# To add webradio support, add fxd/webradio.fxd to this list
AUDIO_ITEMS = [
('music', '/home/per/music'),
('music extra', '/extra/music'),
('playlists', '/home/per/.mpd/playlists'),
# The list of filename suffixes that are used to match the files that
# are played as audio.
# AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', 'mka' ]
# Regular expression used to recognize filenames which are likely to be
# covers for an album
# This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg:
# AUDIO_COVER_REGEXP = 'front|-f'
# Format strings used to seach for audio cover images.
# Fist matching GIF, JPG or PNG image will be used as cover.
# Examples:
# AUDIO_COVER_FORMAT_STRINGS = [ 'cover-%(artist)s-%(album)s', 'mycover' ]
# AUDIO_COVER_FORMAT_STRINGS = [ '%(album)s', '../covers/%(album)s', '../covers/nocover' ]
# Preferred audio player
AUDIO_PREFERED_PLAYER = 'mplayer'
# Show video files in the audio menu (for music-videos)
AUDIO_SHOW_VIDEOFILES = False
# ======================================================================
# Freevo image viewer settings:
# ======================================================================
# Where image files can be found.
# This is a list of items (e.g. directories, fxd files). The items itself
# can also be a list of (title, file)
IMAGE_ITEMS = [
('pictures', '/home/per/pictures'),
# The list of filename suffixes that are used to match the files that
# are used for the image viewer.
# IMAGE_SUFFIX = [ 'jpg','gif','png','jpeg','bmp','tiff','psd' ]
# The viewer now supports a new type of menu entry, a slideshow file.
# It also has the slideshow alarm signal handler for automated shows.
# It uses a new configuration option:
# IMAGE_SSHOW_SUFFIX = [ 'ssr' ]
# The viewer can exclude certain types of images based on the regular expression list
# eg IMAGE_EXCLUDE = [('thm','tn_')]
# IMAGE_EXCLUDE = None
# Mode of the blending effect in the image viewer between two images
# Possible values are:
# None: no blending
# -1 random effect
# 0 alpha blending
# 1 wipe effect
IMAGEVIEWER_BLEND_MODE = -1
# When viewing images on a TV screen where the pixels are not square
# the images need to be scaled according to the aspect ratio of the TV
# Use this setting for 16x9 TVs
# IMAGEVIEWER_ASPECT = (float(1024) / float(720))
# Use this setting for 4x3 TVs
# IMAGEVIEWER_ASPECT = (float(768) / float(720))
# Use this setting for Monitors including HDTVs
# IMAGEVIEWER_ASPECT = 1.0
# IMAGEVIEWER_ASPECT = 1.0
# ======================================================================
# Freevo games settings:
# ======================================================================
# MAME is an emulator for old arcade video games. It supports almost
# 2000 different games! The actual emulator is not included in Freevo,
# you'll need to download and install it separately. The main MAME
# website is at http://www.mame.net, but the version that is used here
# is at http://x.mame.net since the regular MAME is for Windows.
# SNES stands for Super Nintendo Entertainment System. Freevo relies
# on other programs that are not included in Freevo to play these games.
# NEW GAMES SYSTEM :
# =================
# The GAMES_ITEMS structure is now build as follows :
# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \
# [<FILE_SUFFIX_FOR_GENERIC>])
# where :
# - <TYPE> : Internal game types (MAME or SNES) or
# generic one (GENERIC)
# - <COMMAND_PATH> : Emulator command
# - <COMMAND_ARGS> : Arguments for the emulator
# - <IMAGE_PATH> : Optionnal path to the picture
# - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC
# type, then you must specify here
# the file suffix used by the emulator
# GAMES_ITEMS = [
# ('MAME', '/home/media/games/xmame/roms',
# ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6',
# '/home/media/games/xmame/shots', None)),
# ('SUPER NINTENDO', '/home/media/games/snes/roms',
# ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),
# ('Visual Boy Advance', '/home/media/games/vba/roms/',
# ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),
# ('MEGADRIVE', '/home/media/games/megadrive/roms',
# ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' ))
# GAMES_ITEMS = None
# These settings are used for the MAME arcade emulator:
# Priority of the game process
# 0 = Don't change the priority
# >0 - Lower priority
# <0 - Higher priority
# GAMES_NICE = -20
# MAME cache directory
# GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())
# ======================================================================
# Freevo SKIN settings:
# ======================================================================
# XML file for the skin. If SKIN_XML_FILE is set, this skin will be
# used, otherwise the skin will rememeber the last choosen skin.
# SKIN_XML_FILE = 'blurr'
# Select a way when to switch to text view even if a image menu is there
# 1 = Force text view when all items have the same image and there are no
# directories
# 2 = Ignore the directories, always switch to text view when all images
# are the same
# SKIN_FORCE_TEXTVIEW_STYLE = 1
# Force text view for the media menu
# (The media menu is the first menu displayed for video, audio, images
# and games).
# SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0
# ======================================================================
# Freevo OSD settings:
# ======================================================================
# System Path to search for fonts not included in the Freevo distribution
# OSD_EXTRA_FONT_PATH = [ '/usr/share/fonts/truetype' ]
# Font aliases
# All names must be lowercase! All alternate fonts must be in './share/fonts/'
# OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' }
# For non-european character sets the OSD_FORCE_FONTNAME and
# OSD_FORCE_FONTSIZE can be set. The size is a scaling ratio, ie 1.2.
# Setting OSD_FORCE_FONTNAME='batang.ttf' and OSD_FORCE_FONTSIZE=1.0
# allows Korean characters.
# OSD_FORCE_FONTNAME = None
# OSD_FORCE_FONTSIZE = None
# Number of seconds to wait until the busy icon is shown in the menu.
# Busy icon can also be shown right away when there is more than a certain
# number of files in a directory.
# Set this to None to disable this.
# (seconds, files)
# OSD_BUSYICON_TIMER = (0.7, 200)
# Number of pixels to move the display to centre the OSD on the display
# OSD_OVERSCAN_LEFT = OSD_OVERSCAN_RIGHT = 0
# OSD_OVERSCAN_TOP = OSD_OVERSCAN_BOTTOM = 0
# Setting the cursors when freevo is run in fullscreen mode
# OSD_X11_CURSORS = '/usr/lib/X11/cursors/black.cursor /usr/lib/X11/cursors/blank.cursor'
# Execute a script on OSD startup.
# OSD_SDL_EXEC_AFTER_STARTUP = ""
# Execute a script on OSD close.
# OSD_SDL_EXEC_AFTER_CLOSE = ""
# Stop the osd before playing a movie with xine or mplayer. Some output
# devices need this. After playback, the osd will be restored
# OSD_STOP_WHEN_PLAYING = 0
# Dim text that doesn't fit instead of using ellipses.
# OSD_DIM_TEXT = 1
# OSD sound effects
# OSD_SOUNDS_ENABLED=False
# OSD_SOUNDS= {
# 'menu.navigate': None,
# 'menu.back_one': None,
# 'menu.select' : None
# ======================================================================
# Freevo remote control settings:
# ======================================================================
# Location of the lircrc file
# For remote control support, Freevo needs a lircrc file, like this:
# begin
# prog = freevo
# button = select
# config = SELECT
# end
# Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter
# script.
# LIRCRC = '/etc/freevo/lircrc'
# Joystick support
# 0 = Disable joystick support
# 1 = Use js0,
# 2 = Use js1,
# ... etc
# JOY_DEV = 0
# JOY_SENS = 32000
# JOY_LOCKFILE = /path/to/joystick/lockfile
# Freevo can support as many buttons as your controller has
# as long as there is a corresponding entry in JOY_CMDS.
# You will also need to plugin.activate('joy').
# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX
# JOY_CMDS = {
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 1' : 'PLAY',
# 'button 2' : 'PAUSE',
# 'button 3' : 'STOP',
# 'button 4' : 'ENTER',
# Here are the PS3 joy stick mappings
# JOY_CMDS = {
# 'button 5' : 'UP',
# 'button 7' : 'DOWN',
# 'button 8' : 'LEFT',
# 'button 6' : 'RIGHT',
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 14' : 'SELECT', # <circle>
# 'button 16' : 'EXIT', # <square>
# 'button 15' : 'STOP', # <x>
# 'button 1' : 'ENTER', # <select>
# 'button 11' : 'VOL+', # <L1>
# 'button 9' : 'VOL-', # <L2>
# 'button 2' : 'MUTE', # <L3>
# 'button 10' : 'MUTE', # <R2>
# 'button 4' : 'PLAY', # <start>
# 'button 13' : 'PLAY', # <start>
# 'button 17' : 'MENU', # <ps>
# ======================================================================
# TVtime settings:
# ======================================================================
# Location of the TV time program
# Default: Use the value in freevo.conf
# TVTIME_CMD = CONF.tvtime
# ======================================================================
# MPlayer settings:
# ======================================================================
# MPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see mplayer docs
# MPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal'
# DVD_LANG_PREF = 'en,se,no' # Order of preferred languages on DVD.
# DVD_SUBTITLE_PREF = '' # Order of preferred subtitles on DVD.
# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.
# prio <0 has no effect unless run as root.
# MPLAYER_NICE = -20
# Mplayer options to use the software scaler. If your CPU is fast enough, you
# might try a software scaler. You can disable it later for some larger files
# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop
# as mplayer option, the software scaler will also not be used.
# A good value for this variable is:
# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\
# "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )
# older versions of mplayer may need
# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width
# MPLAYER_SOFTWARE_SCALER = ''
# Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)
# Uses a default value if nothing else matches.
# MPLAYER_ARGS = { 'dvd' : '-cache 8192',
# 'vcd' : '-cache 4096',
# 'cd' : '-cache 1024 -cdda speed=2',
# 'tv' : '-nocache',
# 'ivtv' : '-cache 8192',
# 'avi' : '-cache 5000 -idx',
# 'rm' : '-cache 5000 -forceidx',
# 'rmvb' : '-cache 5000 -forceidx',
# 'webcam' : 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2',
# 'default': '-cache 5000'
# Number of seconds before seek value times out. This is used when
# seeking a specified number of minutes into a movie. If you make
# a mistake or change your mind, the seek value will timeout after
# this many seconds.
# MPLAYER_SEEK_TIMEOUT = 8
# Autocrop files when playing. This is useful for files in 4:3 with black
# bars on a 16:9 tv
# MPLAYER_AUTOCROP = 0
# Try to set correct 'delay' and 'mc' values for mplayer based on the delay
# from mmpython.
# This should correct av sync problems with mplayer for some files, but
# may also break things. (I don't know, that's why it's disabled by default).
# WARNING: When seeking, the playback is out of sync for some seconds!
# MPLAYER_SET_AUDIO_DELAY = 0
# Mplayer video filter for interlaced or progressive videos. If you have
# a slow pc, do not use post processing
# MPLAYER_VF_INTERLACED = ''
# MPLAYER_VF_PROGRESSIVE = 'pp=fd'
# For pal and dvb-t recordings, the following looks good
# MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U'
# MPLAYER_VF_INTERLACED = 'pp=de/fd'
# MPLAYER_VF_PROGRESSIVE = 'pp=de'
# For the autodetect TOP/BOTTOM field first in mplayer
# (if this feature present in mplayer)
# MPLAYER_HAS_FIELD_DOMINANCE = 1
# ======================================================================
# Xine settings:
# ======================================================================
# You need xine-ui version greater 0.9.21 to use the all the features
# of the xine plugin
# XINE_VO_DEV = 'xv'
# XINE_COMMAND = '%s --auto-play=fq --hide-gui --borderless --geometry %sx%s+0+0 --no-splash' % \
# (CONF.xine, CONF.width, CONF.height)
# XINE_ARGS_DEF = "--no-lirc --post='pp:quality=10;expand'"
# XINE_AO_DEV = 'oss' # alsa or oss
# Set to False if xine doesn't have '--no-lirc' option
# XINE_HAS_NO_LIRC = True
# Set to True is xine supports get_time this enables the position to be saved
# XINE_BOOKMARK = False
# ======================================================================
# Freevo TV settings:
# ======================================================================
# This is where recorded video is written.
# XXX the path doesn't work from the www cgi scripts!
# TV_RECORD_DIR = None
# This will enable duplicate recording detection
# TV_RECORD_DUPLICATE_DETECTION = True
# This will enable only new episodes to be recorded
# TV_RECORD_ONLY_NEW_DETECTION = True
# ================================================================================
# Watching TV
# ================================================================================
# XXX You must change this to fit your local conditions!
# NORM: ntsc, pal, secam
# INPUT: television, composite1
# CHANLIST: One of the following:
# us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,
# europe-east, italy, newzealand, australia, ireland, france, china-bcast,
# southafrica, argentina, canada-cable, russia
# TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'
# Video input device
# Usually /dev/video0, but might be /dev/video1 instead for multiple boards.
# FreeBSD uses the Brooktree TV-card driver, not V4L.
# TV_DRIVER = 'v4l'
# TV_DEVICE = '/dev/video0'
# TV_INPUT = 0
# ================================================================================
# Listening to radio
# ================================================================================
# Radio device default is None, /dev/video24 for ivtv
# RADIO_DEVICE = '/dev/radio'
# Radio commands:
# plugin.activate('audio.radioplayer')
# plugin.activate('audio.radio')
# for fmtools
# RADIO_CMD = 'fm'
# RADIO_CMD_START = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q %s 65535')
# RADIO_CMD_STOP = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q off')
# for ivtv-radio
# RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24'
# RADIO_STATIONS = [
# ('DRS 1', '94.80'),
# ('VIRUS', '104.30'),
# (u'Radio Zürisee', '90.20'),
# Additional options to pass to mplayer in TV mode.
# eg. To turn off deinterlacing:
# TV_OPTS = '-vop pp=ci'
# TV_OPTS = ''
# TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)
# Size (in MB) of the timeshift buffer. (ie: how long you can pause tv for.)
# This is set to a low default because the default buffer location is
# under FREEVO_CACHEDIR and we don't want to blow /var or /tmp.
# TIMESHIFT_BUFFER_SIZE = 128
# TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \
# (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE)
# TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR
# TV_DATE_FORMAT = '%e-%b' # Day-Month: 11-Jun
# TV_TIME_FORMAT = '%H:%M' # Hour-Minute 14:05
# TV_DATETIME_FORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am
# This is the filename format for files recorded using Freevo.
# You can use any of the strftime variables in it, provided you
# put two '%%' at the beginning.
# Some examples:
# %%A - Full weekday name.
# %%H - Hour (24-hour clock) as a decimal number [00,23].
# %%M - Minute as a decimal number [00,59].
# %%m - Month as a decimal number [01,12].
# %%d - Day of the month as a decimal number [01,31].
# %%p - Locale's equivalent of either AM or PM.
# More can be found at: http://www.python.org/doc/current/lib/module-time.html
# TV_RECORD_FILE_MASK = '%%m-%%d %%H:%%M %(progname)s - %(title)s'
# If using the persistent recordserver
# TV_RECORD_SCHEDULE = FREEVO_STATICDIR + '/schedule.pickle'
# TV_RECORD_FAVORITES = FREEVO_STATICDIR + '/favorites.pickle'
# TV_RECORD_FAVORITES_LIST = FREEVO_STATICDIR + '/favorites.txt'
# RECORDSERVER_IP = 'localhost'
# RECORDSERVER_PORT = 18001
# RECORDSERVER_SECRET = 'secret1'
# If the recordserver runs as root, set the uid to the given one
# after startup. The gui must also match one of the users group ids
# RECORDSERVER_UID = 0
# RECORDSERVER_UID = 0
# Remove old recordings if GB free is less than specified value
# RECORDSERVER_CLEANUP_THRESHOLD = 0
# start every recording X minutes before scheduled,
# and stop X minutes after scheduled - default to zero minutes.
# This must be a value in seconds although at the moment only has
# the percision of one minute.
# TV_RECORD_PADDING_PRE = 0
# TV_RECORD_PADDING_POST = 0
# Number of minutes before or after the start time of a favorite where
# a program matching the name, day of week etc should still be considered a
# favorite. For example a favorite has a start time of 21.00, but the program
# has been brought forward by the broadcaster by 10 minutes to 20.50, with
# a margin of less than 10 this program will not be recorded as the start time
# is outside the margin. But if the margin is set at 10 minutes or greater this
# program will be considered a favorite and recorded. Probably about 45 minutes
# is the best bet, better a false positive than a false negative.
# TV_RECORD_FAVORITE_MARGIN = 45
# PRE and POST recording commands. Set these to a runnable command if
# you wish to have special mixer settings or video post processing.
# VCR_PRE_REC = None
# VCR_POST_REC = None
# VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
# ':audiorate=32000' + # 44100 for better sound
# ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
# 'buffersize=64') # 64MB capture buffer, change?
# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
# TV_VIEW_SIZE = (640, 480)
# TV_REC_SIZE = (320, 240) # Default for slower computers
# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
# TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11
# TV_REC_OUTFMT = 'yuy2'
# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
# VCR_CMD = (CONF.mencoder + ' ' +
# 'tv:// ' + # New mplayer requires this.
# '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) +
# ':norm=%s' % CONF.tv +
# ':channel=%(channel)s' + # Filled in by Freevo
# ':chanlist=%s' % CONF.chanlist +
# ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
# ':outfmt=%s' % TV_REC_OUTFMT +
# ':device=%s' % TV_DEVICE +
# VCR_AUDIO + # set above
# ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec
# 'vcodec=mpeg4' + # lavcodec mpeg-4
# ':vbitrate=1200:' + # Change lower/higher, bitrate
# 'keyint=30 ' + # Keyframe every 10 secs, change?
# '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must be enabled in mencoder!
# 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s
# '-ffourcc divx ' + # Force 'divx' ident, better compat.
# '-endpos %(seconds)s ' + # only mencoder uses this so do it here.
# '-o %(filename)s') # Filled in by Freevo
# TV_VIDEO_GROUPS setting to handles multiple arbitrary groups of devices
# for viewing or recording. It is possible to have different Freevo
# channels use different Video Groups.
# See the wiki for more details:
# http://doc.freevo.org/MultiTunerConfig
# http://doc.freevo.org/Analoguemulti
# This example is when you have one IVTV type card installed
# TV_VIDEO_GROUPS = [
# VideoGroup(vdev=TV_DEVICE,
# adev=AUDIO_DEVICE,
# input_type='tuner 1',
# input_num=0,
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# group_type = 'ivtv',
# desc='PVR-350 Video Group'),
# This example is for two normal TV cards to allow you to use one card to
# view a programme and the other card to record at the same time
# TV_VIDEO_GROUPS = [
# # Use this group for watching tv
# VideoGroup(vdev='/dev/video0',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Watching Video Group',
# record_group=1),
# # Use this group for recording tv
# VideoGroup(vdev='/dev/video1',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Recording Video Group',
# record_group=None),
# Settings for ivtv based cards such as the WinTV PVR-250/350.
# TODO: Add descriptions and valid settings for each option.
# bitrate in bps
# stream type
# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),
# 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)
# TV_IVTV_OPTIONS = {
# 'input' : 4,
# 'resolution' : '720x480',
# 'aspect' : 2,
# 'audio_bitmask' : 233,
# 'bframes' : 3,
# 'bitrate_mode' : 1,
# 'bitrate' : 4000000,
# 'bitrate_peak' : 4000000,
# 'dnr_mode' : 0,
# 'dnr_spatial' : 0,
# 'dnr_temporal' : 0,
# 'dnr_type' : 0,
# 'framerate' : 0,
# 'framespergop' : 15,
# 'gop_closure' : 1,
# 'pulldown' : 0,
# 'stream_type' : 10,
# TV Channels. This list contains a mapping from the displayed channel name
# to the actual channel name as used by the TV watching application.
# The display name must match the names from the XMLTV guide,
# and the TV channel name must be what the tuner expects (usually a number).
# The TV menu is supposed to be supported by the XMLTV application for
# up to date listings, but can be used without it to just display
# the available channels.
# This list also determines the order in which the channels are displayed!
# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)
# if you make changes here and restart!
# Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]
# If this variable is set to None (default), Freevo will try to auto-detect
# the channel list based on the xmltv file. This doesn't work for all
# xmltv grabber, e.g. the German list doesn't contain station lists. In this
# case Freevo will output the possible list for you to add them manually.
# If auto-detection doesn't work or you want to edit the list, run
# freevo tv_grab -query.
# Setting this variable to [] will deactivate the tv guide. If you don't have
# a tv card, you may also want to add plugin.remove('tv') to remove the whole
# tv menu.
# All channels listed here will be displayed on the TV menu, even if they're
# not present in the XMLTV listing.
# Timedependent channels:
# The TV_CHANNELS-list can look like this:
# TV_CHANNELS = [('21', 'SVT1', 'E5'),
# ('22', 'SVT2', 'E3'),
# ('26', 'TV3', 'E10'),
# ('27', 'TV4', 'E6'),
# ('10', 'Kanal 5', 'E7'),
# ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')),
# ('16', 'TV6', 'E8', ('1234567','1700','2359'),
# ('1234567','0000','0300')),
# ('14', 'MTV Europe', 'E11') ]
# As you can see the list takes optional tuples:
# ( 'DAYS', 'START','END')
# 1234567 in days means all days.
# 12345 would mean monday to friday.
# It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00.
# 03:00 to 06:00 it won't be displayed at all.
# TV_CHANNELS = None
# A lambda function to sort the TV_CHANNELS
#TV_CHANNELS_COMPARE = lambda a, b: cmp(int(a[2]), int(b[2]))
# TV_FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.
# This is only the case if you are using V4L2 and any of the following plugins:
# timeshift, ivtv_record, ivtv_basic_tv.
# For the standard frequancy tables see src/tv/freq.py. To add your own just
# replace tuner_id in the following example with a valid tuner id (ie: '5' or
# 'BBC1') and a frequency in KHz. You may have as many entries as you like,
# anything here will simply override a corresponding entry in your standard
# frequency table and you can also have entries here that are not present in
# there.
# TV_FREQUENCY_TABLE = {
# 'tuner_id' : 55250,
# Program to grab xmltv listings. To get a grabber, you need to download
# xmltv. A possible value for users in the USA is tv_grab_na
# Use the tv_grab helper to grab the listings and cache them. Start
# 'freevo tv_grab --help' for more informations.
# XMLTV_GRABBER = ''
# If you want to run tv_sort on your listings add the path to tv_sort here.
# tv_sort will make sure all your programs have proper stop times, otherwise
# programs might get cut off at midnight.
# XMLTV_SORT = ''
# Number of days the grabber should get
# XMLTV_DAYS = 3
## ONLY ADJUST THIS IF YOUR GUIDE TIMES ARE INCORRECT ##
# GMT offset for XMLTV feeds that don't contain timezone information
# An example of this is the OzTivo feed which has the timestamps
# in the XML pre-adjusted for your timezone
# XMLTV_TIMEZONE='+0100'
# ======================================================================
# Freevo builtin commdetect server settings:
# ======================================================================
# COMMDETECTSERVER_UID = 0
# COMMDETECTSERVER_GID = 0
# COMMDETECTSERVER_IP = 'localhost'
# COMMDETECTSERVER_PORT = 6667
# ======================================================================
# Freevo builtin rss server settings:
# ======================================================================
# RSSSERVER_UID = 0
# RSSSERVER_GID = 0
# RSS_CHECK_INTERVAL = 3600
# RSS_FEEDS = '/etc/freevo/rss.feeds'
# RSS_VIDEO = '/media/video'
# RSS_AUDIO = '/media/podcasts'
# ======================================================================
# Freevo builtin WWW server settings:
# ======================================================================
# To activate the built in web server, uncomment the following line
# plugin.activate('www')
# Web server port number. 80 is the standard port, but is often
# taken already by apache, and cannot be used unless the server
# runs as root. Port 8080 is the default, change to 80 if
# needed.
# WEBSERVER_PORT = 8080
# Username / Password combinations to login to the web interface.
# WWW_USERS = {
# "user1" : "changeme",
# "optional" : "changeme2"
# Divide the TV guide into intervals of this length (in minutes)
# WWW_GUIDE_INTERVAL = 30
# Precision for TV guide (in minutes)
# WWW_GUIDE_PRECISION = 5 #
# Show this many blocks at once
# WWW_GUIDE_COLS = 6
# WWW_STYLESHEET = 'styles/main.css'
# WWW_JAVASCRIPT = 'scripts/display_prog-head.js'
# Integrate personal web pages into the web server
# WWW_PERSONAL_PAGE = [
# ('My Page', 'a single personal web page', 'page.html'),
# ('My Site', 'site description', 'site/'),
# ======================================================================
# Internal stuff, you shouldn't change anything here unless you know
# what you are doing
# ======================================================================
# Config for xml support in the movie browser
# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers
# VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"
# Remote control daemon. The server is in the Freevo main application,
# and the client is a standalone application in rc_client/
# ENABLE_NETWORK_REMOTE = 0
# REMOTE_CONTROL_HOST = '127.0.0.1'
# REMOTE_CONTROL_PORT = 16310
# Remote control daemon. Similar to the one above, but uses TCP instead
# of UDP. It is possible to send commands with a telnet client.
# ENABLE_TCP_NETWORK_REMOTE = 0
# REMOTE_CONTROL_TCP_HOST = '127.0.0.1'
# REMOTE_CONTROL_TCP_PORT = 16311
# XMLTV File
# This is the XMLTV file that can be optionally used for TV listings
# XMLTV_FILE = '/tmp/TV.xml'
# XML TV Logo Location
# Use the "makelogos.py" script to download all the
# Station logos into a directory. And then put the path
# to those logos here
# TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'
# ======================================================================
# Idlebar and plugins
# These are the default idlebar settings, there are many more see:
# freevo plugins -l for a complete list
# To turn off use plugin.remove('idlebar.cdstatus')
# clock display
# %A - Full weekday name.
# %a - Abbreviated weekday name.
# %B - Full month name
# %b - Abbreviated month name
# %I - Hour (12-hour clock) as a decimal number [01,12].
# %H - Hour (24-hour clock) as a decimal number [00,23].
# %M - Minute as a decimal number [00,59].
# %m - Month as a decimal number [01,12].
# %b - Name of Month
# %d - Day of the month as a decimal number [01,31].
# %p - Locale's equivalent of either AM or PM.
# %y - Year without century as a decimal number [00,99].
# %Y - Year with century as a decimal number.
# ======================================================================
# plugin.activate('idlebar')
# plugin.activate('idlebar.tv', level=20)
# plugin.activate('idlebar.cdstatus', level=25)
# plugin.activate('idlebar.diskfree', level=30)
# plugin.activate('idlebar.clock', level=50)
# CLOCK_FORMAT = '%a %d %H:%M'
# Debugging and logging settings
# logging can be one of:
# CRITICAL, ERROR, WARNING, INFO, DEBUG or NOTSET
# debugging is a number from 0 to 9, 0 is no debugging 9 is most
# LOGGING = logging.DEBUG
# LOGGING_RECORDSERVER = logging.DEBUG
# DEBUG = 1
# messages go to stdout
# DEBUG_STDOUT = 0
# messages from starting a child application
# DEBUG_CHILDAPP = 1
# timing messages
# DEBUG_TIME = 0
I've been reading wikis and googling now the entire weekend so I hope someone here can help me.Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf. -
Hi there.
I have been working on a test system which will potentially have TestStand at its core, and downloaded/installed the 4.2.1 evaluation. Current details from the information dialog are:
TestStand Engine version 4.2.1 (4.2.1.83)
Sequence Editor Verison 4.2.1.83
The system will drive mobile radio devices using RS232 serial interfaces, usnig a variety of serial protocols (Hayes, and a couple of proprietary binary protocols for other work).
We already have in existence a soak tester, written in VS2005 with MFC unmanaged DLLs and also managed DLLs, which are mixed up together to provide different aspects of the functionality required for the binary protocols.
I have created:
1. a "master wrapper" DLL for the constellation of other DLLs - this offers up a simple C-API interface which I hope TestStand will use. It's called "SerialSessionMgr.dll""
2. a mixed managed / unmanaged "IJW" (it just works) DLL which wraps up the binary logging protocol control interfaces, which are entirely in managed C++/CLI: the "master wrapper" DLL calls into this through an unmanaged interface to create instances of the CLI-compiled class which interfaces to the underlying managed DLLs imlpementing the logging protocol. This is called "WinTseInterface.dll".
Before I started evaluating TestStand, I knocked up a test harness using CPPUnit / MFC, with which I was able to test SerialSessionMgr.dll and its' use of WinTseInterface.dll and verify they worked. The harness loads the DLL dynamically at run-time using AfxLoadLibrary() to try to emulate the way TestStand uses it.
When we open a
TSE session:
The SerialSessionManager makes a call to the
WinTseInterface.dll to "create" a logging instance. The instance is
created in a std::map which is held by the CWinApp derived class, this map
contains boost::shared_ptr of the class which works with a managed class. So we
have a call trace: Client
app->SerialSessionManager{TseStartSession()}->WinTseInterface{WINTSE_GetWinTseBridge()} - WINTSE_GetWinTseBridge()
just creates a new instance of the unmanaged class which interfaces through to
the managed CLI/C++ class beneath, and returns the address to the
SerialSessionManager, which stores it.
The SerialSessioManager actually initialises the WinTseBridge using a method of a C++ pure virtual interface class to the class in the std::map in the WinTseInterface DLL
implements. The initialise call passes miscellaneous details and actually calls
"gcnew" to create the managed class which interfaces to the
underlying managed DLLs which implement the logging protocol.
My logs of the DLL loading as seen in VS2005 debug output are attached this message as PDFs
While trying to fix this, I have tried:
Enhancing the WinTseInterface DLL so it manually loads all the other assemblies in the logging system, including the managed portion of WinTseInterface itself (no effect)
All the different options for the way the C DLL adapter loads and unloads the DLL in the DLL adapter steptype in TestStand
I've even tried calling directly into the WinTseInterface DLL before trying any SerialSessionManager DLL calls to try to load the WinTseInterface DLL completely beforehand
and I cannot stop this exception.
It seems like the object is created in the WinTseInterface DLL OK (I have debugged the creation step which runs for WINTSE_GetWinTseBridge() and the object is created OK) when the SerialSessionManager makes the call, but when it calls the first managed function, which creates the managed object, the DLL is reloaded as managed - I suspect this causes the object to be destroyed or overwritten, and thus the call to initialise bombs with null pointer violation.
Have I done something obviously wrong, and what other approaches can I take?
Does TestStand 4.2.1 have issues with driving DLLs which use managed/unmanaged DLLs beneath them?
My nuclear option is to throw the WinTseInterface DLL out completely and wrap up the managed C++ CLI code in a new interface, entirely managed, and use the TestStand ".Net" adaptor to drive that, creating my step library to run to that directly. This isn't ideal as I have some co-ordination of the protocols which is implemented in the SerialSessionMgr DLL.
I hope someone can help. This one's low level, dirty and a stumper to me.
Many thanks to the NI community. This is my first posting!
Solved!
Go to Solution.
Attachments:
CPPUnit Test Harness DLL load debug output.pdf 18 KB
TestStand DLL load & crash debug output.pdf 43 KBHi there Ray.
First - many thanks for engaging with this thorny problem. Love the avatar BTW.
I've been using the C/C++ DLL adapter: the original premise of the Serial Session Manager DLL was to provide a simple C type functional interface, using simple data types, so that TestStand would be able to drive the underlying functionality easily through a single DLL.
Seeing as you've been kind enough to respond, I should explain the makeup of the DLLs a little more, I think.
The SerialSessionManager (SSMgr) DLL uses C++ and MFC internally. This is the DLL which TestStand calls into directly through the C/C++ adapter. This DLL does have one odd feature though - because the it uses the Windows Multimedia Timer (implemented in WinMM.dll) I had to artificially create a scenario where it would load the .Net mscoree DLL _before_ it loads WinMM.dll - (http://connect.microsoft.com/VisualStudio/feedback/details/329819/freelibrary-in-the-winmm-dlls-modu...), basically WinMM.dll's init code gets rather upset when .Net DLLs load, which causes the entire executable to be unloaded with subsequent crashes.
To work around this crash, the SSMgr has a single, completely empty, file which is compiled for CLR, effectively forcing a dependency into the DLL on the .Net subsystems and turning the DLL into a "IJW" binary. The resulting DLL doesn't actually have any executable managed .Net assemblies, but I'm guessing that it does contain enough .Net related stubs and information that when the DLL is loaded, mscoree.dll loads before WinMM.dll - and this means the system doesn't crash.
Now, on to the WinTseInterface DLL. My initial description of this little software system was done in something of a hurry.
This DLL is the C++/CLI "IJW" DLL which actually contains managed and unmanaged code. Underneath the WinTseInterface DLL is another system of (this time exclusively C++/CLI) DLL assemblies which implement the TSE protocol interpretation system.
When the SSMgr DLL needs to start a TSE protocol session, it calls a C-API function in the WinTseInterface which creates a new CWinTseBridge class. Here's the steps in a little more detail:
SSMgr DLL calls WINTSE_GetWinTseBridge(), passing in the name of the device which needs it (this is used to put the new WinTseBridge into a std::map in the WinTseInterface DLL) - this call runs just fine, and returns the address of the CWinTseBridge C++ object. This is stored in the SSMgr, because the CWinTseBridge class implements a pure virtual interface which is used by the SSMgr as a way of accessing the CWinTseBridge methods.
We now use the address from (1) to make a call to CWinTseBridge::Initialise(), passing some basic configuration details.
I've run VS2005 debug on the Sequence Editor when running the test, and done F11 step-throughs of the code loading each parameter in the Initialise() call onto the stack, and what appears to happen is that when the call is made, the whole lot steps off into oblivion (a reference to 0x00000000 is made, I think).
Do you think it's worth trying to get this approach to work? It would be useful to retain the control surface in the top of the SSMgr as there is co-ordination of the protocols within the logic of that component. If I move the Wintse control out into a separate managed DLL I may not have that co-ordination (this might be overcome with some design, as I've confirmed that it is possible to "reach into" the WinTseInterface DLL with TestStand and create and use managed objects from assemblies contained within).
Are there any known issues with this version of TestStand using C/C++ CLI IJW DLLs? I haven't found much out there on the web.
Attachments:
Tse_Test.seq 7 KB -
49 Service Error - Turn Off then On - LaserJet Pro 200 M276nw
I was adding to another post for a different printer but didn't want anyone with MY printer to MISS this problem.
***UPDATE*** (at least for my LaserJet Pro 200 M276nw)
I have found the root cause but will need further assistance from someone at HP to "solve" this one....
My new M276nw keeps throwing a 49 Service Error, chat support yielded alot of power off, power on, wait, try again blah blah blah, fuser problems blah blah. 10 minutes of forum searching put me onto possible wireless networking issues with other printers and SSID's. Anyway after returning one printer to Staples and having the problem come up again on a another brand new one....Tried Forum searching & Tada! at least I got to find a root cause.
I have a D-Link DIR-825 wireless router. It has dual band (2.4 GHz and 5 GHz).
Normally I have both enabled for the myriad of devices that people have these days in my home.
I updated the firmware to the latest update (20121026) then restarted.
Received the 49 Service Error shortly after restart.
Then I disabled both bands to test each wireless band independently.
The printer acted normally so I decided to enable each band seperately.
When I enable the 2.4 GHz band in the router, the printer immediately throws a 49 Service Error.
I tested this several times (5 to be exact) and each time during the router reboot the printer indicated the error.
So I left the 2.4 GHz band disabled and went on to the 5 GHz band.
I enabled the 5 GHz band 3 times and disabled it and found no effect on the printer (at least within a 5 minute window).
So now I'm left with only a single band wireless router or a printer that likes to restart itself every 20 minutes or so.
There is probably a setting (or 2) that can be tweaked in either the router or the printer that can prevent this (I hope).
I just need to find the right HP person............
This question was solved.
View Solution.I really wish I could help but I am afraid this is a bit beyond my level of comprehension. What I took from this was, you have to turn off the duel band feature to get the printer to work without that error message, correct? The User Guide may help you but when I tried to read it my mind was blown away by just how many settings could be adjusted to fit your needs. No need to do anything troulbeshooting-wise just yet. All I need for you to do is look at page 137 on how to set sleep delay and auto power down functions and page 132 for link and duplex settings and let me know if you think it could be something to do with these.
As far as a setting within the router, I do not know. I did find another user guide with very technical information in it. The Software Technical Reference hinted to bi-directional printing which basically turns off or on the print spooler if the printer was so big it was using up network resources but I am not sure of that at all (see Page 59 for an example). Page 89 and on is a brief introduction to the embedded web server but really these are just definitions, nothing new to report there.
This website hints that it may be a firmware error. Lastly, the only other thing I can offer as you have probably seen it yourself is another HP forum thread regarding your exact error. I know I won't be of much assistance but some hopefully is better than none. I'm just glad it works partially. Let me know if I can answer any questions for you but this is just a step out of my league. Good luck!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Safari 4.0.3: "un-update" or locate "turn features off" buttons?
Pardon me if I'm a bit confused; this is the first forum I've visited that seems to prefer new threads to posting in related threads. I think.
Short version: I got the "updates available" message a couple weeks ago, and I updated. I now have Safari 4.0.3 and I hate it. I mean I really hate it. This is really disappointing for me, as Safari was the first ever pack-in browser that I really loved.
I have many issues with it, one of which (with the help of a thread here I stumbled across) I have semi-resolved, but am still not completely happy.
So I would like to know if anyone can tell me one of two things:
How to "undo" an update and go from something I loathe as much as Explorer and back to something I adored.
Or
How to "turn off" the following irritants:
the "Top Sites" feature. This is just irritating. I use my computer at home for research. When I have pulled the information I need, I will only rarely ever need to revisit a paper. Though it's nice to know (for example, when researching STDs, that I always had on tap a large number of pictures of dripping groins, available even when the kids are playing games on Nickelodeon (ask me how I know this). Further, my computer at work is a shared computer, used by myself and four salesmen. This feature has resulted essentially in the salesmen all giving away to each other their "secret sources" for various materials. Since they're all on commission, this has resulted in a great deal of conflict there. Gotta love that.
Yes; I am well aware that I can "clear history" when I'm done with the net. The problem is that I don't want to clear the history from my home computer; it's something the kids can't just stumble across, and it is handy while I'm writing a paper, since it contains every site I've visited since the last clear.
The "page through" view for Bookmarks. Since there are no pictures that go with most of my Bookmarks when I'm writing research papers, I find myself scrolling through an endless procession of little black record albums, all with the Safari compass logo. Boy Howdy, now that's way better than a screen-filling list I could take in at a glance, yeah, Man....
I don't know what it's called, but that irritating "second layer" that spends sixty seconds or so generating a preview of something every time I mouse over an attachment thumbnail. 1: I don't always want to look at it. 2: it's faster to simply click it and open it in a new window or tab than it is to wait on this feature 3: opening it in a new tab doesn't completely stop me from browsing the rest of the page.
Actually, at this very moment, the "updates available" icon is bouncing on my dock, and I'm not going to click it until I see some reports of what the update is and what it does and how adversely it has affected folks.Thanks for the reply, Golden Shoes.
I can't say that 4 is faster than what I had. I had a major speed issue with it, but I found advice about changing the numbers in the DNS servers blanks, etc, and did that. Sort of. I've only got room to enter one number; no way to enter both. But it did help, and the loading speed is almost up to what it was pre-update. While it's still a bit slower, I can live with it where it is now.
As for the Cover Flow advice:
Will that remove cover flow as an option completely? It's not that I don't like Cover Flow; I love it for perusing graphic files, etc. However, for running through my Bookmarks, it's horribly inappropriate.
I really don't want to use the Top Sites feature, however. I strongly dislike it, and am surprised to see that there is no option short of recoding to turn it off. I don't wish to sound like someone trying to make a sarcastic point with this next question, because I am being very serious:
Have a made a big mistake buying a Mac? I do not know how to read, write, or edit code, nor do I feel particularly comfortable that I could learn to do such a thing. Is there commonly a need to work directly with the code when "tuning" a Mac?
Just so you will have some background:
At work, we went to aluminum iMacs because the entire company was so disgusted with Vista that even the Board agreed we'd come out with less expense and lost hours swapping systems entirely as opposed to coping with Vista. I liked the iMac I was using at work so much that I bought one to replace my XP box.
But I am not by any stretch of the imagination more than just a "user." If changing code is the norm (as opposed to Preference or Finder toggles), I may have made a very expensive mistake.
Sorry for the digression; frustration coming out, I suppose. Ha!
If it's not too much trouble, can you clarify the results of pasting in the command you suggested? Will it completely disable the Cover Flow feature, or will it simply turn it off in relation to Bookmarks?
Will it completely disable the Top Sites feature?
And-- embarrassingly enough-- what is Terminal? Where do I find it?
Looking at the updates doesn't help. I "looked" at the last one. It said "Safari 4.0.3." There was nothing there to indicate "makes this and this mandatory and slows browser to a crawl."
This update similarly gives a name and series number, but nothing that would indicate if it's something I do or don't want (like Safari 4.0.3: it seemed like something good, but it's a long list of non-undoable "do not want" 'features.' ).
Is there anything that can be done about the mousing over a thumbnail automatically knocks you out of browsing to open up a representation of the file contents?
Thanks for the time and the advice. I apologize for knowing ... well, absolutely nothing. -
HT1657 How can I turn off the scrolling movie ads in itunes store?
How can I turn off the scrolling movie ads across the top of the screen when I open the itunes store and am in the movies section?
Thanks varjak paw.
I was afraid this was the case. To the degree that Apple marches down this well-travelled road towards making money by trying to pound customers into submission with flashing ads, etc. that actually serve only to aggravate and drive away at least people like me (28 year user of macs) from both Apple and whatever is being advertised, and indeed get in the way of my being able to efficiently do what is my part of what I always thought was the core of the synergism between Apple and its customers -- them innovating to provide the best tools to help us to be creative and productive, then the company will find itself sharing that space with myriad other companies so bankrupt for ideas and innovation that they have no other possible strategy that to promote mindless consumerism. That does not seem a place of strength for Apple and a complete forfeiting of its unique position. Sad to watch. -
Std Work flow for Invoice Parking & posting
I am working om std SAP workflow for invoice document parking :
I have done the following activities :
1. Activate Work flow Template for Document Completion
Here i activated the event "Complete the Parked Log. IV Document"--> Incoming Invoice Document Parked. It is showing a green traffic light .
In agent assignment
Complete the Parked Log. IV Document>Complete the Parked Log. IV Document>Complete the Parked Invoice--> i have assigned the user MMCONFIG
2. In Define Release Criteria i have the following settings :
1000 H Credit 0.01 INR US MMCONFIG
1000 S Debit 0.01 INR US MMCONFIG
3. In Activate Workflow Template for Release for Posting
Here i activated the event Incoming Invoice Complete: ReleaseRel & i m getting a green traffic light .
In assign agents i did the following
Release the Completed Log. IV Document>Release the Completed Log. IV Document>Release the Completed Log. IV Document i assigned the user MMCONFIG
In Invoice Parking: Approve Release i assigned the user MMCONFIG .
For Invoice Parking: Release Invoice
Invoice Parking: Posting an Invoice " I AM NOT ABLE TO ASSIGN ANY USER AS THESE ARE BACKGROUND TASKS ".
Now when do a MIR7 - Park invoice & save the invoice as complete i am getting a mail in the mail box of MMCONFIG saying :
"Invoice Release 5105xxxxxxx 2009, Completed by MMCONFIG "
I go & release the same invoice .
Then i executed MIRO & tried posting the released invoice . The sysem doesnt allow me 2 post the invoice .
It automatically goes to MIR4 transaction & forces me to save as complete
if i try to post it the system says "Parked document is release-relevant and cannot be posted"
Pls tell me how can I post the invoice & IF MY SETTINGS FOR THE WORKFLOW IS OK ???
Regards
AnisFirstly, check with the Binding of the event and workflow, if they are fine
then check if the workflow gets triggered when you are posting... to check this,
First go to transaction SWU8 - turn on the workflow trace and then
Proceed with posting the invoice
go to transaction SWU8 again and then turn off the workflow trace
go to SWU9 - to check which all workflows got triggered....
If there is any workitem in your workflow, then go to SWI1 and select the workitem of that workflow and press shift+F8 to check the status of it and also check to which all agents it had sent...
If possible just give a hardcoded value in the workitem for testing purpose and check if that goes properly, later on implement the rule.....
If the workflow does not triggere - go to transaction SWETYPV and deactivate and activate the event linkage with that workflow....
Regards,
Maybe you are looking for
-
I am on Windows 7 with iTunes10.6.1.7 and not able to install 10.7 on a 32bit machine
The computer is 32bit Dell with 2GB Ram and 2 GHZ
-
My internet is limited through the day and I want to know if I can set a specific time for updates to be carried out to make sure my macbook is working efficiently.
-
No error generated if batch process load file uses wrong naming convention
Another interesting one... When using the batch processing functionality of FDM, which can be executed by either: - FDM Workbench (manually) - Hyperion FDM Task Manager (scheduled) - upsShell.exe (scheduled and executed from a batch script) ..., one
-
Inconsistent and incorrect file icons in finder window list view
I have been seeing incorrect file icons in finder windows noteably for PDF files the last couple of weeks on my office MacMini running 10.5.8. Some just look messed up. Some switched and looked like Evernote files, but they open correctly in the defa
-
Imovie to one step idvd transfer
I used the easy imovie option to transfer 60 minutes of minidvd data to an external hard drive..it seems to play well..However when I then transferred the movie to one step idvd, the sound track did not transfer..or rather the track is garbled..Is th