Sonet alarm problem on Cisco GSR
Hi,
I'm Peter working in an ISP network operations. I have problems understanding this alarm in Cisco GSR. July 15 04:44:55 EDT: %SONET-4-ALARM: POS5/0/0: B3 BER exceeds threshold, TC alarm declared. How do I troubleshoot this problem? The interface is up but the line protocol went down because of it. What we did was we requested a loop from our international peering facing our side and we were able to see the loop. After releasing the loop and normalizing the line, line protocol went up and traffic started to flow. What's the first thing to do in problems like this?
Friend:
take a look to this:
http://www.cisco.com/en/US/tech/tk482/tk607/technologies_tech_note09186a0080094a79.shtml
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93c4.shtml
http://www.cisco.com/en/US/tech/tk482/tk607/technologies_tech_note09186a0080094522.shtml
I am actually getting same errors, i am triying to figure out what is going on, it looks like we are having problems with providor...
Similar Messages
-
Missed a flight due to Alarm Problem!
I don't know why apple didn't send out any warning messages to users about this issue. Apple really upsets me!
No, January 1st is NOT when the i Phone alarm problem hit -- Apple has known about this problem since it first showed up on iPhones in New Zealand in October. see this Apple Insider report from last November:
"The new support document [<http://support.apple.com/kb/TS3542>]*, published on Wednesday [11/03/10], comes days after Apple made headlines with an iPhone bug that caused repeating alarm clocks to go off late across Europe. The issue occurred because of a change from daylight saving time, and could repeat itself in the U.S. on Sunday when America concludes daylight saving.
Apple's documentation notes that users can resolve the issue by setting the repeat interval on an alarm to "Never." If users reset their alarm every day, the daylight saving bug will not affect them.
The support note says that after daylight saving ends in the U.S. on Nov. 7, users will be able to set their alarms to repeat again. The iOS issue affects the iPhone 4, iPhone 3GS, and iPhone 3G, as well as the fourth-, third- and second-generation iPod touch models.
In October, the same bug caused alarm clocks in New Zealand to go off an hour early. Apple said it was aware of the issue and had already developed a software fix, but it has not yet been released.
This week, Apple released the golden master of iOS 4.2, the next software update for the iPhone, iPod touch and iPad, to developers. Golden master status suggests that the software is finalized and a release to the public is imminent. It's possible that Apple could release the software update before this Sunday, allowing users who update their iPhone to iOS 4.2 to avoid the daylight saving bug."
*Apple Support doc: <http://support.apple.com/kb/TS3542> posted November 3, 2010, which said:
"Symptoms
In some regions, shortly before or after the daylight saving time (DST) change, repeating alarms created in the Clock app may work incorrectly.
Products Affected
iPod touch (2nd generation), iPod touch (3rd generation), iPhone 4, iPhone 3G, iPod touch (4th generation), iPhone 3GS
Resolution
To resolve this behavior for existing alarms, set the repeat interval to Never. You will need to reset these alarms for each day you need them.
After November 7th, 2010, you can set your alarms to repeat again"
NB: This Apple Support doc was posted 11/03/10, and has not been updated since.
But the problem didn't "fix itself" on 11/07/10, after the DST change, and it didn't fix itself today, January 3, 2011 -- Apple's next promised date that the iPhones would "fix themselves," -- as both my daughter in CT, and my son-in-law in KC, KS can attest: their iPhone "wake-up" alarms both went off an hour late, in different time zones.
Want more on "No kidding, Jan. 1 is when the problem hit. Jan. 3 it goes away?" Try these:
Computerworld IT Watch
iPhone alarm clock glitch: Still not working; iOS bug FAIL
By Richi Jennings. January 3, 2011
Despite Apple's promise that it would fix itself by today, the iOS alarm clock glitch is still making pomaceous owners oversleep. iPhone and iPod Touch alarms stubbornly persist in not working due to yet another bug with alarms. In IT Blogwatch, bloggers rub their eyes in disbelief.
From SkyNews, 01/03/11
An Apple spokeswoman released a statement to Macworld on Jan. 2 saying it was aware of the problem and that the alarm on the £499 ($773) handset would begin functioning normally again Monday.
However, the firm has yet to release a further statement on the problem.
Read more: http://news.sky.com/skynews/Home/Technology/iPhone-Users-Say-Alarm-Clocks-Yet-to -Be-Fixed/Article/201101115878764
from CNNTech, 01/03/11 ,http://www.cnn.com/2011/TECH/mobile/01/03/iphone.alarms.mashable/index.html?hpt= Sbin>:
"Apple said yesterday that the failure of its clock app only happens when you set a one-time alarm, and it will somehow fix itself on January 3.
"We have made a call and sent an e-mail into Apple asking why this happened."
From PC Magazine: <http://www.pcmag.com/article2/0,2817,2374971,00.asp>:
"iPhone Alarms Still Silent On January 3 "Self-Fix" Date"
"Just two days ago, we reported about a frustrating glitch for those using various permutations of iOS 4 on Apple's iPhones—specifically, an annoying bug that was preventing one's mobile alarm from ringing on either day.
"The bug allegedly only affected single alarms set for either January 1 or January 2. According to Apple itself, the company was aware of the issue and was advising users of a crafty workaround—setting recurring alarms for either day, which would bypass the issue for whatever reason. And according to said Apple spokesperson, the bug would allegedly go away on its own come January 3.
Or so we all thought.
"Reuters is now reporting that some iPhone users are indicating that the alarm issue persists, a claim that's being slowly backed up by affected users' Twitter posts."
Washington Post 01/013/11:
<http://voices.washingtonpost.com/fasterforward/2011/01/iphonealarm_problemspersist.html?wprss=fasterforward>
"iPhone alarm problems persist
By Hayley Tsukayama
Call it Y2K-11. When a bug kept iPhone and iPod touch alarms from sounding on Jan. 1 and Jan. 2, Apple suggested that those having trouble should set recurring alarms, and that the alarms would fix themselves by Jan. 3, the first work day of 2011."
Yahoo News, UK & Ireland, 01/03/11: <http://uk.news.yahoo.com/22/20110103/ttc-uk-apple-asia-fe50bdd.html>
"Some iPhone users in Asia and Europe complained of malfunctioning alarms on the first working day of 2011, even after Apple reassured users that its phones' built-in clocks will work from Monday.
"Bloggers, Facebook and Twitter users complained they missed flights or were late to arrive at work, as the alarm built into Apple's iPhone failed to go off for a third straight day for some users."
BBC: <http://www.bbc.co.uk/news/technology-12104890> 10/02/11, updated 09:14 ET 01/03/11:
iPhone alarms hit by New Year glitch
Setting New Year single alarms was to no avail
A glitch on Apple's iPhone has stopped its built-in alarm clock going off, leaving many people oversleeping on the first two days of the New Year.
Angry bloggers and tweeters complained that they had been late for work, and were risking missing planes and trains.
Apple has acknowledged the problem and says it will be fixed by 3 January.
The reason has not been given but the glitch appears to affect single alarm settings on the iPhone 4 and earlier models with software updates.
“According to the company, the problem will resolve itself on 3 January, but that is two days late for many people”
Jonathan Fildes
BBC Technology reporter
A similar problem hit the iPhone alarm when the clocks went back in November, again causing many users to be late for work or for transport arrangements.
"We're aware of an issue related to non-repeating alarms set for January 1 or 2," Apple spokeswoman Natalie Harrison said in a statement quoted by Macworld.
"Customers can set recurring alarms for those dates and all alarms will work properly beginning January 3."
'Two days too late'
"BBC Technology reporter Jonathan Fildes says the problem is embarrassing for Apple, not only because of previous problems that came to light when the clocks changed, but because the company prides itself on the simplicity of use of its products.
"This seems like another simple error, but it cannot afford to have too many before its reputation becomes tarnished, he says.
"Apple should have learnt from that example and seen this one coming, he adds. According to the company, the problem will resolve itself on 3 January, but that is two days late for many people.
"More than 1.7m people around the world had bought iPhone 4 handsets by June 2010, in what was the company's most successful product launch."
DEAR APPLE DISCUSSION GROUP MODERATORS:
This is not a rant, I'm simply reporting the news regarding the situation with the iPhone Alarm function as it stands this morning, 01/03/11. People claiming that this was a new problem as of 01/01/11 are simply wrong, as your own TS doc <http://support.apple.com/kb/TS3542> of November 03, 2010 clearly attests.
It would certainly be helpful to know the latest Apple timetable for the iPhone alarm problem to "fix itself," or if Apple has managed to come up with any workarounds, other than the third-party alarm clock apps that are available for the iPhone.
Best of luck.
Bart Brown -
NTP Service on Domain Controller have problem with cisco switch
Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
Window 8 WiFi problem with Cisco wireless network
Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad AppThis problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts. -
Ok so i bought a new Vivaz and because of my working hours i need 2 daily alarms. My problem is even though i press the stop key the alarm will repeat itself at random intervals, sometimes after 15 minutes other times after 37 or 23 minutes, one day the alarm repeated itself after 4 hours and 22 minutes i looked in the settings but i didn't find anything, i even reinstalled the phone software. And the second problem i have is that sometimes when i start the camera and want to make pictures it says that there isn't enough memory and i should stop some applications, but the camera is the only one that is running.
if anyone can help it will be gratly apreciated, thank youeven after updating the software the alarm problem remains ??
whats ur default storage for camera ??
i mean when u take a picture. is it saved in the phone memory or sd card ?? -
Alarm problem ios 8 malfunction
Since upgrading, my alarm won't go off. For years, I've kept my iphone on do not disturb and I still get woken up. My sounds setting is with the volume all the way up and the setting of Change w Buttons is off. At first I assumed it was a wifi problem because I deleted my stored music. So, yesterday I downloaded my wakeup song. Again, today no wake up. No vibration, even though the vibration is on. I haven't found any complaints about this bug. When I finally do wake up, the Alarm function is on the screen, but no vibration or song. Help!
in response to
bdm7c Oct 2, 2014 5:58 AM
Re: Alarm problem ios 8 malfunction
Yes, I have the same issue. Song only plays once and that's it. (mine is also iPhone 5s on iOS8)
The whole alarm thing on the iPhone is very substandard in that one actually has to find the right buttons/sliders when still half asleep and eyes and mind half closed. Impossible for me, so I still rely on my good old Nokia phone (no SIM card in it but it still does many functions without) as a reliable alarm. It beeps, I press Snooze and it repeats after 10 minutes etc. Easy!
I think the Apple guys should work a bit harder on this topic as I am sure many folks rely on their phone to wake them up. But it is too fumbly and unreliable which is not good enough for such an expensive product. -
Problem with Cisco VPN client and HP elitebook 2530p windows 7 64-bit
Hi there
I have a HP Elitebook 2530p which i upgraded to windows 7 64-bit. I installed the Cisco VPN client application (ver. 5.0.07.0290 and also 64-bit) and the HP connection manager to connect to the internet through a modem Qualcomm gobi 1000 (that is inside the laptop). When I connect to the VPN, it connects (I write the username and password) but there is no traffic inside de virtual adapter for my servers. When I connect to the internet through wire or wireless internet, I connect de VPN client and there is no problem to establish communication to my servers.
I tried everything, also change the driver and an earlier version of the HP connection manager application. I also talked to HP and they told me that there was a report with this kind of problem and it was delivered to Cisco. I don’t know where is the problem.
Could anyone help me?
Thanks to all.You can try to update Deterministic Network Enhancer to the below listed release which supports
WWAN Drivers.
http://www.citrix.com/lang/English/lp/lp_1680845.asp.
DNE now supports WWAN devices in Win7. Before downloading the latest version of DNEUpdate from the links below, be sure you have the latest
drivers for your network adapters by downloading them from the vendors websites.
For 64-bit: ftp://files.citrix.com/dneupdate64.msi
Hope that helps. -
ASA 5505 Trunking problem with cisco 3760
Here is my asa 5505 configuration and at bottom i am pasting cisco 3760 configuration, I am having trunking problem and seen other people having the same issue but no solution.
Problem: when i connect any device on Switch 3760 port 1 which is trunked i cannot communicate with niether vlan.
I have tried device with both static vlan configuration
192.168.1.99 (vlan 2)
172.168.1.99 (vlan 8)
if i change port 1 to access mode or define native vlan it work with one vlan.
interface 5 of Cisco ASA is connected with interface 25 (uplink) on Cisco Switch
interface Ethernet0/5
switchport trunk allowed vlan 1-10
switchport mode trunk
interface GigabitEthernet1/0/25
description **UPLINK**
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1-10
switchport mode trunk
On port 1 of cisco Switch i am creating trunk
interface GigabitEthernet1/0/1
description **LAN**
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1-10
switchport mode trunk
no logging event link-status
spanning-tree portfast
CISCO ASA Config i have configure the following vlans
interface Vlan2
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan8
description Server VLAN
nameif Internal_LAN
security-level 90
ip address 172.168.1.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
on Cisco 3760 i have configure the following vlan.
v
vlan 2
name inside
vlan 8
name Internal_LAN
interface Null0
no ip unreachables
Message was edited by: macboyHello,
I can see many people have visited the post but there isn't any reply.
I think this is because of the following:
The configurations are long and most people dont want to read it. Try adding only relevant configuration to the issue.
The problem description is not clear. You mention trunking problem but what exactly is the problem? Can you ping from switch to ASA? Is any Vlan information being passed or they are all failing. Try to be as much specific as possible.
Which port of the switch connects to the ASA?
Using portfast on a trunk (interface GigabitEthernet1/0/1) is not recommended.
Regards,
Felipe.
Remember to rate useful posts. -
Problem with Cisco IPMA - between the manager profile and assistant profile
Greetings to all.
The problem basically is that wen I do a call (internal o external) to the extension configured in the manager phone, the assistant phone dosen`t rings or take the call, even the call in progress dosen`t appears in the Cisco Unified Communications Manager Assistant Console of the Assistant
Also the icons of the IPMA in the manager phone dosen`t appears.
I have check the following:
1.The configurations on both profile and its look ok
2.I have restar the Cisco IPMA, CTI and Tomcat Service
3.I have reconfigured the profiles
What else I can do
What is the most common cause in these cases
ThanksI have the same problem, did you resolve it ?
Our Customer have about 50 IPMA and there are work. The problem is only with 4 IPMA Assistance (always the same). Sometimes (few times in week) lost Assistance icon Managers, and Managers doesn’t see shared lines, Intercom, services IPMA on phone doesn’t work. But sometimes Assistant icon is showing but Manager don’t see active connection and can’t call via Intercom.
Assistance have 7962 Phone with load cmterm-7942_7962-sccp.9-2-3.cop.sgn
Managers have 7965 Phone with load cmterm-7945_7965-sccp.9-2-3.cop.sgn
CUCM (PUB/SUB) is 8.6.2.20000-2
I opened a TAC case already but the problem is not resolved. -
Web Redirection Problem on Cisco ISE 1.2 and WLC 7.5
Hello,
We are at initial phase of deploying ISE 1.2 in our environment for Wireless Guest Users.
I have configured ISE and WLC to talk to each other which is working fine. An SSID with MAC-Filtering is also configured on WLC and ACL only allowing ISE and DNS traffice.
I have configured proper authentication and authorization policies on ISE. Now, when I try to connect my device (laptop and android mobile), I see my device gets associated with the SSID (Demo) and gets the right IP Address from DHCP and right VLAN from WLC. The log process on ISE is as follows.
11001
Received RADIUS Access-Request
11017
RADIUS created a new session
11027
Detected Host Lookup UseCase (Service-Type = Call Check (10))
15049
Evaluating Policy Group
15008
Evaluating Service Selection Policy
15048
Queried PIP
15048
Queried PIP
15004
Matched rule
15041
Evaluating Identity Policy
15006
Matched Default Rule
15013
Selected Identity Source - Internal Endpoints
24210
Looking up User in Internal Users IDStore - B8:B4:2E:A6:7D:75
24216
The user is not found in the internal users identity store
24209
Looking up Endpoint in Internal Endpoints IDStore - B8:B4:2E:A6:7D:75
24211
Found Endpoint in Internal Endpoints IDStore
22037
Authentication Passed
15036
Evaluating Authorization Policy
15048
Queried PIP
15048
Queried PIP
15048
Queried PIP
15004
Matched rule - Guest Redirection
15016
Selected Authorization Profile - Test_Profile
11002
Returned RADIUS Access-Accept
I also see a redirect url in the detailed authentication logs. But the problem is that when I open my browser on my device, it doesn't get redirected to the guest portal url. Now since I can't get there, I can't continue with the rest of the process of authentication, COA and final ACL for internet access.
Can some one please either guide me the correct steps that I need to follow, if I have mis configured something or advise if this is a bug.
Thanks in advance.
JayThe ACL is definitely used to define what traffic is re-directed to ISE and what traffic is not redirected. Having the permit-all statement at the end will break redirection. If you are using flex-connect then you will need to use flex-connect ACLs and apply those to the flex-connect APs. The links below should give you an idea of what needs to be done:
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113606-byod-flexconnect-dg-000.html
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html
Thank you for rating helpful posts! -
Problems with Cisco AnyConnect Secure Mobility Client 3.1
Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
The service does not start correctly anymore. I tried reinstabut no help.
Could anyone help me please?
Here my logs.
Thank you very much.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: FileMoveFiles
File: ..\Common\Utility\NativeSysFileCopy.cpp
Line: 388
Invoked Function: ::FindFirstFile
Return Code: 3 (0x00000003)
Description: The system cannot find the path specified.
Date : 07/23/2013
Time : 08:49:37
Type : Error
Source : acvpninstall
Description : Function: wWinMain
File: .\InstallHelper.cpp
Line: 354
Invoked Function: FileMoveFiles
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnva
Description : Function: CInstaller::PerformAction
File: .\VACon.cpp
Line: 522
Successfully installed service acsock
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpninstall
Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
File: .\Xml\XmlLocalACPolMgr.cpp
Line: 415
Local Security Policy file already exists and therefore will not be generated
Date : 07/23/2013
Time : 08:49:40
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:40
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:40
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F84) has been successfully created.
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:41
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:45
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Error
Source : acvpnagent
Description : Function: CSocketSupport::ipv6EnabledOnVA
File: .\IPC\SocketSupport_win.cpp
Line: 284
Invoked Function: CSocketSupport::ipv6EnabledOnVA
Return Code: 2 (0x00000002)
Description: cannot open VPNVA Enum registry key (VA driver not installed?)
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F20) has been successfully created.
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:45
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 31
Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
Date : 07/23/2013
Time : 08:49:48
Type : Information
Source : acvpninstall
Description : Function: SetInheritACLsFromParent
File: .\ACLManager.cpp
Line: 56
Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
Date : 07/23/2013
Time : 08:49:49
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:49:50
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:49:50
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x000016C0) has been successfully created.
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:49:50
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:10
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:50:11
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:11
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x00001F34) has been successfully created.
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:11
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:50:19
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
Date : 07/23/2013
Time : 08:50:20
Type : Information
Source : acvpnui
Description : Initializing vpnapi version 3.1.04059 ().
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getCurrentState
File: .\ClientIfcBase.cpp
Line: 2058
API service not ready
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.nam.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: L2Api::attach
File: .\L2Api.cpp
Line: 87
The NAM/L2 Api could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.websecurity.api
Date : 07/23/2013
Time : 08:50:21
Type : Information
Source : acvpnui
Description : Function: SSApi::attach
File: ..\common\SSApi.cpp
Line: 51
The Web Security API could not be found or failed to load, skipping.
Date : 07/23/2013
Time : 08:50:21
Type : Error
Source : acvpnui
Description : Function: MFDartBox::getDARTInstallDir
File: .\MFDartBox.cpp
Line: 332
Invoked Function: MsiEnumProductsExW
Return Code: 259 (0x00000103)
Description: No more data is available.
Date : 07/23/2013
Time : 08:50:21
Type : Warning
Source : acvpnui
Description : Function: ClientIfcBase::getStats
File: .\ClientIfcBase.cpp
Line: 1723
Called when API service not ready.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CSocketTransport::connectTransport
File: .\IPC\SocketTransport.cpp
Line: 981
Invoked Function: ::WSAConnect
Return Code: 10061 (0x0000274D)
Description: No connection could be made because the target machine actively refused it.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::connectIpc
File: .\IPC\IPCTransport.cpp
Line: 252
Invoked Function: CSocketTransport::connectTransport
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: CIpcTransport::terminateIpcConnection
File: .\IPC\IPCTransport.cpp
Line: 404
Invoked Function: CSocketTransport::writeSocketBlocking
Return Code: -31588319 (0xFE1E0021)
Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initIpc
File: .\ApiIpc.cpp
Line: 423
Invoked Function: CIpcTransport::connectIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::initiateAgentConnection
File: .\ApiIpc.cpp
Line: 336
Invoked Function: ApiIpc::initIpc
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ApiIpc::run
File: .\ApiIpc.cpp
Line: 570
Invoked Function: ApiIpc::initiateAgentConnection
Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Date : 07/23/2013
Time : 08:50:22
Type : Error
Source : acvpnui
Description : Function: ClientIfcBase::attach
File: .\ClientIfcBase.cpp
Line: 606
Client failed to attach.
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: CMainFrame::OnCreate
File: .\mainfrm.cpp
Line: 342
Invoked Function: The VPN service is not responding or available.
Return Code: -33554423 (0xFE000009)
Description: GLOBAL_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Function: ClientIfcBase::detach
File: .\ClientIfcBase.cpp
Line: 438
Shutting down vpnapi
Date : 07/23/2013
Time : 08:50:25
Type : Error
Source : acvpnui
Description : Function: ConnectMgr::activateConnectEvent
File: .\ConnectMgr.cpp
Line: 1352
NULL object. Cannot establish a connection at this time.
Date : 07/23/2013
Time : 08:50:25
Type : Information
Source : acvpnui
Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:51:12
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:51:12
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPolicy: Connect
TrustedDNSDomains:
TrustedDNSServers:
AlwaysOn: false
ConnectFailurePolicy: Closed
AllowCaptivePortalRemediation: false
CaptivePortalRemediationTimeout: 5
ApplyLastVPNLocalResourceRules: false
AllowVPNDisconnect: true
EnableScripting: false
TerminateScriptOnNextEvent: false
EnablePostSBLOnConnectScript: true
AutomaticCertSelection: true
RetainVpnOnLogoff: false
UserEnforcement: SameUserOnly
EnableAutomaticServerSelection: false
AutoServerSelectionImprovement: 20
AutoServerSelectionSuspendTime: 4
AuthenticationTimeout: 12
SafeWordSofTokenIntegration: false
AllowIPsecOverSSL: false
ClearSmartcardPin: true
IPProtocolSupport: IPv4,IPv6
AllowManualHostInput: true
BlockUntrustedServers: true
PublicProxyServerAddress:
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CCvcConfig::readConfigParamFromFile
File: .\vpnconfig.cpp
Line: 5824
The specified configuration file for MUS service does not exist
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CThread::createThread
File: .\Utility\Thread.cpp
Line: 238
The thread (0x0000162C) has been successfully created.
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
Date : 07/23/2013
Time : 08:51:12
Type : Information
Source : acvpnagent
Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
File: .\Routing\InterfaceRouteMonitorCommon.cpp
Line: 477
IP Address Interface List:
FE80:0:0:0:DDA0:24CA:FE35:4D19
148.110.133.126
FE80:0:0:0:19A3:961F:C11C:3724
192.168.164.1
FE80:0:0:0:80B3:F3CD:CA44:952E
169.254.149.46
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeStream::LoadStream
File: ..\..\PhoneHome\Bencode.cpp
Line: 126
Unable to open file for reading
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CBencodeDictionary::CBencodeDictionary
File: ..\..\PhoneHome\Bencode.cpp
Line: 1422
Bencode dictionary internalize failed
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
File: .\PhoneHomeVpn.cpp
Line: 187
Failed to create Bencode dictionary
Date : 07/23/2013
Time : 08:52:13
Type : Error
Source : acvpnagent
Description : Function: CPhoneHomeVpn::CreateSingletonInstance
File: .\PhoneHomeVpn.cpp
Line: 82
Invoked Function: CPhoneHomeVpn
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: CMainThread::CMainThread
File: .\MainThread.cpp
Line: 1017
Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
Return Code: -23396343 (0xFE9B0009)
Description: PHONEHOMEVPN_ERROR_UNEXPECTED
Date : 07/23/2013
Time : 08:52:13
Type : Warning
Source : acvpnagent
Description : Function: PluginLoader::QuickCreatePlugin
File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
Line: 195
Invoked Function: PluginLoader::CreateInstance
Return Code: -29360116 (0xFE40000C)
Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
com.cisco.anyconnect.leaf
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: MsgCatalog::initMsgCatalog
File: .\i18n\MsgCatalog.cpp
Line: 246
Current locale: fr-LU
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Function: ProfileMgr::loadProfiles
File: .\ProfileMgr.cpp
Line: 100
No profile is available.
Date : 07/23/2013
Time : 08:52:13
Type : Information
Source : acvpnagent
Description : Current Preference Settings:
ServiceDisable: false
CertificateStoreOverride: false
CertificateStore: All
ShowPreConnectMessage: false
AutoConnectOnStart: false
MinimizeOnConnect: true
LocalLanAccess: false
AutoReconnect: true
AutoReconnectBehavior: DisconnectOnSuspend
UseStartBeforeLogon: false
AutoUpdate: true
RSASecurIDIntegration: Automatic
WindowsLogonEnforcement: SingleLocalLogon
WindowsVPNEstablishment: LocalUsersOnly
ProxySettings: Native
AllowLocalProxyConnections: true
PPPExclusion: Disable
PPPExclusionServerIP:
AutomaticVPNPolicy: false
TrustedNetworkPolicy: Disconnect
UntrustedNetworkPThere seem to be much more problems with 3.1.04049
Especially with certificate authentication.
I opened some TAC cases.
Try 3.1.04063 that came out at 07-24-13.
TAC said that there are some fixes in it... -
Problem with Cisco 861W router and outgoing VPN
We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
Here is the Access Point Configuration:
Current configuration : 2100 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname obap
enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
no aaa new-model
dot11 syslog
dot11 ssid OLIVER
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 XXXXXXXXXXX
username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid OLIVER
antenna gain 0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecti
ng AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.0.2 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
cns dhcp
end
obap#
Here is the Router's Configuration:
Current configuration : 5908 bytes
! No configuration change since last restart
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname obrouter
boot-start-marker
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
no aaa new-model
memory-size iomem 10
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-1856757619
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1856757619
revocation-check none
rsakeypair TP-self-signed-1856757619
crypto pki certificate chain TP-self-signed-1856757619
certificate self-signed 01
3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
quit
no ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.99
ip dhcp pool ccp-pool1
import all
network 192.168.0.0 255.255.255.0
dns-server 216.49.160.10 216.49.160.66
default-router 192.168.0.1
ip cef
no ip bootp server
ip domain name brushhog.com
ip name-server 216.49.160.10
ip name-server 216.49.160.66
license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description $ES_WAN$$FW_OUTSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
duplex auto
speed auto
pppoe-client dial-pool-number 1
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXXXXXXXX
ppp chap password 7 XXXXXXXXXXXXXXXX
ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
no cdp enable
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
logging trap debugging
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.0.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
login local
no modem enable
transport output telnet
line aux 0
login local
transport output telnet
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
Any help would be appreciatedHello,
i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Can someone help?
Thank you.
Here is my config for internal AP and router. -
Problem whit cisco 2921 + EVM-HD-8FXS/DID whit CUCM
Hello everyone.
I have the following problem that I am not able to resolve. I define a new connection BRI.
I can make calls seamlessly between the Cisco Unified Communications Manager (version: 8.5.1.10000-26) and Cisco 2921 (CISCO2921-V/K9).
But when you receive calls from BRI Cisco receives the call but the Cisco Unified Communications Manager does not tranfere for Ext
And I can not understand why. In other BRI interfaces do not have this problem.
This configuration here that I'm using.
Current configuration : 17238 bytes
! Last configuration change at 18:02:34 PORT Mon Apr 2 2012 by admin
! NVRAM config last updated at 18:02:56 PORT Mon Apr 2 2012 by admin
! NVRAM config last updated at 18:02:56 PORT Mon Apr 2 2012 by admin
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname <<omitted>>
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 <<omitted>>
aaa new-model
aaa authentication login default none
aaa authentication login <<omitted>>
aaa accounting connection h323 start-stop group radius
aaa session-id common
clock timezone PORT 0 0
clock summer-time PORT recurring last Sun Mar 1:00 last Sun Oct 1:00
network-clock-participate slot 1
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate wic 3
network-clock-select 1 BRI0/0/0
network-clock-select 2 BRI0/1/0
network-clock-select 3 BRI0/2/0
network-clock-select 4 BRI0/3/0
no ipv6 cef
ip source-route
ip cef
no ip domain lookup
ip domain name <<omitted>>
multilink bundle-name authenticated
isdn switch-type basic-net3
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed- <<omitted>>
enrollment selfsigned
subject-name cn= <<omitted>>
revocation-check none
rsakeypair TP-self-signed- <<omitted>>
crypto pki certificate chain <<omitted>>
<<omitted>>
quit
voice-card 0
dsp services dspfarm
voice call send-alert
voice call disc-pi-off
voice call carrier capacity active
voice rtp send-recv
voice service voip
no ip address trusted authenticate
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
h323
modem passthrough nse codec g711ulaw
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class h323 1
h225 timeout tcp establish 5
voice translation-rule 1
rule 1 /^21 <<omitted>>/ /21 <<omitted>>/
rule 2 /^21 <<omitted>>/ /21 <<omitted>>/
rule 3 /^21 <<omitted>>/ /21 <<omitted>>/
voice translation-rule 2
rule 1 /^21 <<omitted>>/ /21 <<omitted>>/
rule 2 /^21 <<omitted>>/ /21 <<omitted>>/
rule 3 /^21 <<omitted>>/ /21 <<omitted>>/
rule 4 /^21 <<omitted>>/ /21 <<omitted>>/
rule 5 /^21 <<omitted>>/ /21 <<omitted>>/
rule 6 /^21 <<omitted>>/ /21 <<omitted>>/
voice translation-rule 3
rule 1 /^21 <<omitted>>/ /21 <<omitted>>/
rule 2 /^21 <<omitted>>/ /21 <<omitted>>/
rule 3 /^21 <<omitted>>/ /21 <<omitted>>/
voice translation-rule 4
rule 1 /^0/ /400/
rule 2 /^/ /21 <<omitted>>/
voice translation-rule 5
rule 1 /^21 <<omitted>>/ /21 <<omitted>>/
rule 2 /^21 <<omitted>>/ /21 <<omitted>>/
rule 3 /^21 <<omitted>>/ /21 <<omitted>>/
voice translation-rule 11
rule 1 /.*/ /21 <<omitted>>/
voice translation-rule 12
rule 1 /^21 <<omitted>>/ /21 <<omitted>>/
rule 2 /.*/ /21 <<omitted>>/
voice translation-rule 13
rule 1 /.*/ /21 <<omitted>>/
voice translation-rule 14
rule 1 /.*/ /21 <<omitted>>/
voice translation-rule 15
rule 1 /.*/ /21<<omitted>>/
voice translation-rule 21
rule 1 /^./ /0&/
voice translation-rule 22
rule 1 /^./ /0&/
voice translation-rule 25
rule 1 /^./ /0&/
|
voice translation-rule 23
rule 1 /^./ /0&/
voice translation-rule 24
rule 1 /^./ /0&/
voice translation-rule 32
rule 1 /^212104974/ /21 <<omitted>>/
rule 2 /.*/ /212104975/
voice translation-profile INLINE_EMPA
translate calling 22
translate called 2
voice translation-profile INLINE_EMPB
translate calling 23
translate called 3
voice translation-profile INLINE_EMPC
translate calling 25
translate called 5
voice translation-profile INLINE_EMPE
translate calling 24
translate called 4
voice translation-profile INLINE_EMPD
translate calling 21
translate called 1
voice translation-profile OUTLINE_EMPA
translate calling 12
voice translation-profile OUTLINE_EMPA_NT_FAX
translate calling 32
voice translation-profile OUTLINE_EMPB
translate calling 13
voice translation-profile OUTLINE_EMPC
translate calling 15
voice translation-profile OUTLINE_EMPE
translate calling 14
voice translation-profile OUTLINE_EMPD
translate calling 11
license udi pid CISCO2921/K9 sn <<omitted>>
hw-module pvdm 0/0
hw-module sm 1
username admin privilege 15 password 0 <<omitted>>
redundancy
ip ssh time-out 60
ip ssh authentication-retries 2
class-map match-all Voz
match access-group 100
policy-map QoS
class Voz
priority 200
set precedence 5
class class-default
fair-queue
gw-accounting aaa
attribute acct-session-id overloaded
acct-template callhistory-detail
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address <<omitted>> 255.255.0.0
ip access-group BLOCK in
load-interval 30
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr <<omitted>>
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
description $ES_LAN$
no ip address
shutdown
duplex auto
speed auto
interface BRI0/0/0
description EMPD N:
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/0/1
description Ecotel EMPD N:
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/1/0
description EMPA N:
no ip address
isdn switch-type basic-net3
isdn tei-negotiation first-call
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/1/1
description EMPA N:
no ip address
isdn switch-type basic-net3
isdn tei-negotiation preserve
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/2/0
description EMPB N:
no ip address
isdn switch-type basic-net3
isdn tei-negotiation preserve
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/2/1
description Ecotel EMPB N:
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI0/3/0
description EMPE N:
no ip address
isdn switch-type basic-net3
isdn tei-negotiation preserve
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/3/1
description Ecotel EMPA N
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/0
description B EMPC N:
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI1/1
description Ecotel EMPE N:
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/2
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/3
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/4
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/5
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/6
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
interface BRI1/7
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip rtcp report interval 500
ip access-list extended BLOCK
deny ip any host <<omitted>>
deny ip any host <<omitted>>
deny ip any host <<omitted>>
deny ip any host <<omitted>>
permit ip any any
ip radius source-interface GigabitEthernet0/0
radius-server host <<omitted>> auth-port 1647
radius-server host <<omitted>> acct-port 1647
radius-server key <<omitted>>
radius-server vsa send accounting
control-plane
voice-port 0/0/0
translation-profile incoming INLINE_EMPD
translation-profile outgoing OUTLINE_EMPD
compand-type a-law
cptone PT
voice-port 0/0/1
compand-type a-law
cptone PT
voice-port 0/1/0
translation-profile incoming INLINE_EMPA
translation-profile outgoing OUTLINE_EMPA
compand-type a-law
cptone PT
voice-port 0/1/1
translation-profile incoming INLINE_EMPA
translation-profile outgoing OUTLINE_EMPA_NT_FAX
compand-type a-law
cptone PT
voice-port 0/2/0
translation-profile incoming INLINE_EMPB
translation-profile outgoing OUTLINE_EMPB
compand-type a-law
cptone PT
voice-port 0/2/1
translation-profile incoming INLINE_EMPB
translation-profile outgoing OUTLINE_EMPB
compand-type a-law
cptone PT
description Ligacao Acesso GSM
bearer-cap Speech
voice-port 0/3/0
translation-profile incoming INLINE_EMPE
translation-profile outgoing OUTLINE_EMPE
compand-type a-law
cptone PT
voice-port 0/3/1
translation-profile incoming INLINE_EMPA
translation-profile outgoing OUTLINE_EMPA
compand-type a-law
cptone PT
description Ligacao Acesso GSM
bearer-cap Speech
voice-port 1/0/0
compand-type a-law
cptone PT
voice-port 1/0/1
compand-type a-law
cptone PT
voice-port 1/0/2
compand-type a-law
cptone PT
voice-port 1/0/3
compand-type a-law
cptone PT
voice-port 1/0/4
compand-type a-law
cptone PT
voice-port 1/0/5
compand-type a-law
cptone PT
voice-port 1/0/6
compand-type a-law
cptone PT
voice-port 1/0/7
compand-type a-law
cptone PT
voice-port 1/0/8
translation-profile incoming INLINE_EMPC
translation-profile outgoing OUTLINE_EMPC
compand-type a-law
cptone PT
voice-port 1/0/9
compand-type a-law
cptone PT
voice-port 1/0/10
compand-type a-law
cptone PT
voice-port 1/0/11
compand-type a-law
cptone PT
voice-port 1/0/16
compand-type a-law
cptone PT
voice-port 1/0/17
compand-type a-law
cptone PT
voice-port 1/0/18
compand-type a-law
cptone PT
voice-port 1/0/19
compand-type a-law
cptone PT
ccm-manager music-on-hold
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp profile default
dial-peer voice 1 pots
description +++++ Dial-peer +++++
incoming called-number .
direct-inward-dial
port 0/0/0
dial-peer voice 10 pots
description touchwise
destination-pattern 1T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/0
dial-peer voice 20 pots
description globalmove
preference 1
shutdown
destination-pattern 5T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/0
dial-peer voice 30 pots
description globaltemp
shutdown
destination-pattern 3T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/2/0
dial-peer voice 40 pots
description EMPE
destination-pattern 4T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/3/0
dial-peer voice 100 voip
preference 1
destination-pattern .
session target ipv4:10.35.2.1
voice-class codec 1
no vad
dial-peer voice 21 pots
description globalmove
preference 2
shutdown
destination-pattern 5T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/1
dial-peer voice 101 voip
preference 2
destination-pattern .
session target ipv4:10.35.2.2
voice-class codec 1
no vad
dial-peer voice 24 pots
description globalmove
preference 1
destination-pattern 59[1236].......
port 0/3/1
forward-digits 9
dial-peer voice 25 pots
description globalmove
preference 1
destination-pattern 500T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/0
dial-peer voice 26 pots
description globalmove
preference 2
destination-pattern 500T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/1
dial-peer voice 27 pots
description globalmove
preference 1
destination-pattern 5[123678]T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/0
dial-peer voice 28 pots
description globalmove
preference 2
destination-pattern 5[123678]T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/1/1
dial-peer voice 34 pots
description globalTemp
preference 1
destination-pattern 39[1236].......
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/2/1
forward-digits 9
dial-peer voice 35 pots
description globalTemp
preference 1
destination-pattern 300T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/2/0
dial-peer voice 37 pots
description globalTemp
preference 1
destination-pattern 3[123678]T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/2/0
dial-peer voice 14 pots
description empd
preference 1
destination-pattern 19386648.......
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/1
forward-digits 9
dial-peer voice 15 pots
description empd
preference 1
destination-pattern 19365483.......
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/1
forward-digits 9
dial-peer voice 16 pots
description empd
preference 1
destination-pattern 19341347.......
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/1
forward-digits 9
dial-peer voice 50 pots
description EMPC
destination-pattern 5T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 1/0/8
gateway
timer receive-rtp 1200
gatekeeper
shutdown
call-manager-fallback
max-conferences 4 gain -6
transfer-system full-consult
ip source-address 10.35.2.250 port 2000
max-ephones 100
max-dn 300
transfer-pattern 09........
transfer-pattern 02........
transfer-pattern 0.........
transfer-pattern 000T
transfer-pattern 4...
keepalive 10
time-format 24
date-format dd-mm-yy
shutdown
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login authentication touchwise
transport input ssh
line vty 5 15
login authentication touchwise
transport input ssh
scheduler allocate 20000 1000
ntp master 5
endIf t i "Translation Pattern Configuration" switch to another "Partition" existing or internal it works.
If change back for the new i create. It does not work.
So I must be some flaw i made in Cisco Unified CM. -
Problem VOFR cisco 3810 and Cisco 1750
-I have a network with equipment 3810 Cisco and Cisco 1750 in topology in stars.
-The router central is a Cisco 3810 wthin a E1 connected to PBX
- other router in the network, have fxs wthin two port
- the network this working with vofr
- the problem is: from an equipment 1750 I can call to a Cisco 3810 but from an equipment 3810 I can not to a cisco 1750.
- but if I place debug in Cisco 1750 ( debug voice ccaip inout) I watch that the call this arriving
- the configurations de routers is OK
- please it can help me---------------Debug voice ccaip inout-----------------------------------
ARBORAL-R#
ARBORAL-R#
ARBORAL-R#ter moni
ARBORAL-R#
*Mar 4 00:01:59.358: cc_api_call_setup_ind (vdbPtr=0x810920C0, callInfo={called=6250,called_oct3=0x0,calling=,calling_oct3=0x0,subscriber_type_str=Unknown,
fdest=1 peer_tag=0},callID=0x80FF6BB4)
*Mar 4 00:01:59.358: cc_api_call_setup_ind type 0 , prot 11
*Mar 4 00:01:59.362: cc_process_call_setup_ind (event=0x81093FA8) handed call to app "DEFAULT"
*Mar 4 00:01:59.362: sess_appl: ev(23=CC_EV_CALL_SETUP_IND), cid(1), disp(0)
*Mar 4 00:01:59.362: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(1), disp(0)
*Mar 4 00:01:59.362: ccCallSetContext (callID=0x1, context=0x81074A5C)
*Mar 4 00:01:59.366: ssaCallSetupInd finalDest cllng(), clled(6250)
*Mar 4 00:01:59.366: ssaSetupPeer cid(1) peer list: tag(6250) called number (6250) tag(1) called number (6250)
*Mar 4 00:01:59.366: ssaSetupPeer rotary_dialpeer_status(1)
*Mar 4 00:01:59.366: ssaSetupPeer cid(1), destPat(6250), matched(4), prefix(), peer(81213410), peer->encapType (1)
*Mar 4 00:01:59.366: ccCallProceeding (callID=0x1, prog_ind=0x0)
*Mar 4 00:01:59.366: ccCallSetupRequest (Inbound call = 0x1, outbound peer =6250, dest=, params=0x81074A70 mode=0, *callID=0x8109F780)
*Mar 4 00:01:59.366: ccCallSetupRequest numbering_type 0x0
*Mar 4 00:01:59.366: dest pattern 6250, called 6250, digit_strip 1
*Mar 4 00:01:59.370: callingNumber=, calledNumber=6250, redirectNumber=
*Mar 4 00:01:59.370: accountNumber=, pinNumber=
*Mar 4 00:01:59.370: finalDestFlag=1, guid=06e4.bc49.8945.19b9.0000.0000.fdc3.ac59
*Mar 4 00:01:59.370: peer_tag=6250
*Mar 4 00:01:59.370: ccIFCallSetupRequestPrivate: (vdbPtr=0x81069AF4, dest=, callParams={called=6250,called_oct3=0x0, calling=,calling_oct3=0x0, subscriber_type_str=Unknown, fdest=1, voice_peer_tag=6250},mode=0x0) vdbPtr type = 6
*Mar 4 00:01:59.370: ccIFCallSetupRequestPrivate: (vdbPtr=0x81069AF4, dest=, callParams={called=6250, called_oct3 0x0,
calling=,calling_oct3 0x0,fdest=1, voice_peer_tag=6250}, mode=0x0)
*Mar 4 00:01:59.370: ccSaveDialpeerTag (callID=0x1, dialpeer_tag=
*Mar 4 00:01:59.370: ccCallSetContext (callID=0x2, context=0x810C043C)
*Mar 4 00:01:59.378: cc_api_call_proceeding(vdbPtr=0x81069AF4, callID=0x2,
prog_ind=0x0)
*Mar 4 00:01:59.378: cc_api_call_alert(vdbPtr=0x81069AF4, callID=0x2, prog_ind=0x8, sig_ind=0x1)
*Mar 4 00:01:59.378: sess_appl: ev(20=CC_EV_CALL_PROCEEDING), cid(2), disp(0)
*Mar 4 00:01:59.378: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_PROCEEDING)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.382: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
*Mar 4 00:01:59.382: ssaIgnore cid(2), st(SSA_CS_CALL_SETTING),oldst(1), ev(20)
*Mar 4 00:01:59.382: sess_appl: ev(7=CC_EV_CALL_ALERT), cid(2), disp(0)
*Mar 4 00:01:59.382: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_ALERT)
oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.382: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
*Mar 4 00:01:59.382: ccCallAlert (callID=0x1, prog_ind=0x8, sig_ind=0x1)
*Mar 4 00:01:59.382: ccConferenceCreate (confID=0x8109F7F8, callID1=0x1, callID2=0x2, tag=0x0)
*Mar 4 00:01:59.382: cc_api_bridge_done (confID=0x1, srcIF=0x810920C0, srcCallID=0x1, dstCallID=0x2, disposition=0, tag=0x0)
*Mar 4 00:01:59.386: cc_api_bridge_done (confID=0x1, srcIF=0x81069AF4, srcCallID=0x2, dstCallID=0x1, disposition=0, tag=0x0)
*Mar 4 00:01:59.386: cc_api_caps_ind (dstVdbPtr=0x810920C0, dstCallId=0x1, srcCallId=0x2,
caps={codec=0xEBFB, fax_rate=0x7F, vad=0x3, modem=0x2
codec_bytes=0, signal_type=3})
*Mar 4 00:01:59.386: cc_api_caps_ind (Playout: mode 0, initial 56068,min 33034, max 5688)
*Mar 4 00:01:59.386: cc_api_caps_ind (dstVdbPtr=0x81069AF4, dstCallId=0x2, srcCallId=0x1,
caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
codec_bytes=30, signal_type=2})
*Mar 4 00:01:59.386: cc_api_caps_ind (Playout: mode 0, initial 0,min 0, max 0)
*Mar 4 00:01:59.386: cc_api_caps_ack (dstVdbPtr=0x81069AF4, dstCallId=0x2, srcCallId=0x1,
caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
codec_bytes=30, signal_type=2})
*Mar 4 00:01:59.386: cc_api_caps_ack (dstVdbPtr=0x810920C0, dstCallId=0x1, srcCallId=0x2,
caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
codec_bytes=30, signal_type=2})
*Mar 4 00:01:59.390: cc_api_call_disconnected(vdbPtr=0x81069AF4, callID=0x2, cause=0xAC)
*Mar 4 00:01:59.390: sess_appl: ev(28=CC_EV_CONF_CREATE_DONE), cid(1), disp(0)
*Mar 4 00:01:59.390: cid(1)st(SSA_CS_CONFERENCING_ALERT)ev(SSA_EV_CONF_CREATE_DONE)
oldst(SSA_CS_MAPPING)cfid(1)csize(0)in(1)fDest(1)
*Mar 4 00:01:59.390: -cid2(2)st2(SSA_CS_CONFERENCING_ALERT)oldst2(SSA_CS_CALL_SETTING)
*Mar 4 00:01:59.390: sess_appl: ev(12=CC_EV_CALL_DISCONNECTED), cid(2), disp(0)
*Mar 4 00:01:59.394: cid(2)st(SSA_CS_CONFERENCED_ALERT)ev(SSA_EV_CALL_DISCONNECTED)
oldst(SSA_CS_CALL_SETTING)cfid(1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.394: -cid2(1)st2(SSA_CS_CONFERENCED_ALERT)oldst2(SSA_CS_CONFERENCING_ALERT)
*Mar 4 00:01:59.394: ssaDisconnectedAlert: redirect_numbers(0)
*Mar 4 00:01:59.394: ccConferenceDestroy (confID=0x1, tag=0x0)
*Mar 4 00:01:59.394: cc_api_bridge_drop_done (confID=0x1, srcIF=0x810920C0, srcCallID=0x1, dstCallID=0x2, disposition=0 tag=0x0)
*Mar 4 00:01:59.394: cc_api_bridge_drop_done (confID=0x1, srcIF=0x81069AF4, srcCallID=0x2, dstCallID=0x1, disposition=0 tag=0x0)
*Mar 4 00:01:59.394: sess_appl: ev(29=CC_EV_CONF_DESTROY_DONE), cid(1), disp(0)
*Mar 4 00:01:59.394: cid(1)st(SSA_CS_ALERT_DISC_CONF_DESTROYING)ev(SSA_EV_CONF_DESTROY_DONE)
oldst(SSA_CS_CONFERENCING_ALERT)cfid(1)csize(0)in(1)fDest(1)
*Mar 4 00:01:59.398: -cid2(2)st2(SSA_CS_ALERT_DISC_CONF_DESTROYING)oldst2(SSA_CS_CONFERENCED_ALERT)
*Mar 4 00:01:59.398: ssa: Disconnected cid(2) state(11) cause(0xAC)
*Mar 4 00:01:59.398: ssaCallDisconnectAlert: cid(2), peer-cid(1)
*Mar 4 00:01:59.398: ccCallDisconnect (callID=0x2, cause=0xAC tag=0x0)
*Mar 4 00:01:59.402: cc_api_call_disconnect_done(vdbPtr=0x81069AF4, callID=0x2, disp=0, tag=0x0)
*Mar 4 00:01:59.402: sess_appl: ev(13=CC_EV_CALL_DISCONNECT_DONE), cid(2), disp(0)
*Mar 4 00:01:59.402: cid(2)st(SSA_CS_ALERT_DISC_DISCONNECTING)ev(SSA_EV_CALL_DISCONNECT_DONE)
oldst(SSA_CS_CONFERENCED_ALERT)cfid(-1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.402: -cid2(1)st2(SSA_CS_ALERT_DISC_DISCONNECTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
*Mar 4 00:01:59.406: ssaDisconnectDone: Rotary Retry cid(1) peer list: tag(1) called number (6250)
*Mar 4 00:01:59.406: ssaSetupPeer cid(1) peer list: tag(1) called number (6250)
*Mar 4 00:01:59.406: ssaSetupPeer rotary_dialpeer_status(2)
*Mar 4 00:01:59.406: ssaSetupPeer cid(1), destPat(6250), matched(0), prefix(), peer(81211DC4), peer->encapType (5)
*Mar 4 00:01:59.406: ccCallProceeding (callID=0x1, prog_ind=0x0)
*Mar 4 00:01:59.406: ccCallSetupRequest (Inbound call = 0x1, outbound peer =1, dest=, params=0x81074A70 mode=0, *callID=0x8109F7C0)
*Mar 4 00:01:59.406: ccCallSetupRequest numbering_type 0x0
*Mar 4 00:01:59.406: dest pattern ...., called 6250, digit_strip 0
*Mar 4 00:01:59.406: callingNumber=, calledNumber=6250, redirectNumber=
*Mar 4 00:01:59.406: accountNumber=, pinNumber=
*Mar 4 00:01:59.410: finalDestFlag=1, guid=06e4.bc49.8945.19b9.0000.0000.fdc3.ac59
*Mar 4 00:01:59.410: peer_tag=1
*Mar 4 00:01:59.410: ccIFCallSetupRequestPrivate: (vdbPtr=0x810920C0, dest=, callParams={called=6250,called_oct3=0x0, calling=,calling_oct3=0x0, subscriber_type_str=Unknown, fdest=1, voice_peer_tag=1},mode=0x0) vdbPtr type = 11
*Mar 4 00:01:59.410: ccSaveDialpeerTag (callID=0x1, dialpeer_tag=
*Mar 4 00:01:59.410: ccCallSetContext (callID=0x3, context=0x810C0D90)
*Mar 4 00:01:59.458: cc_api_call_proceeding(vdbPtr=0x810920C0, callID=0x3,
prog_ind=0x8)
*Mar 4 00:01:59.462: sess_appl: ev(20=CC_EV_CALL_PROCEEDING), cid(3), disp(0)
*Mar 4 00:01:59.462: cid(3)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_PROCEEDING)
oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.462: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
*Mar 4 00:01:59.462: ssaIgnore cid(3), st(SSA_CS_CALL_SETTING),oldst(1), ev(20)
*Mar 4 00:01:59.466: cc_api_call_disconnected(vdbPtr=0x810920C0, callID=0x3, cause=0x3)
*Mar 4 00:01:59.466: sess_appl: ev(12=CC_EV_CALL_DISCONNECTED), cid(3), disp(0)
*Mar 4 00:01:59.466: cid(3)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_DISCONNECTED)
oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(0)fDest(0)
*Mar 4 00:01:59.466: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
*Mar 4 00:01:59.466: ssa: Disconnected cid(3) state(1) cause(0x3)
*Mar 4 00:01:59.470: ccCallDisconnect (callID=0x3, cause=0x3 tag=0x0)
*Mar 4 00:01:59.470: ccCallDisconnect (callID=0x1, cause=0x3 tag=0x0)
*Mar 4 00:01:59.470: cc_api_call_disconnect_done(vdbPtr=0x810920C0, callID=0x3, disp=0, tag=0x0)
*Mar 4 00:01:59.470: sess_appl: ev(13=CC_EV_CALL_DISCONNECT_DONE), cid(3), disp(0)
*Mar 4 00:01:59.474: cid(3)st(SSA_CS_DISCONNECTING)ev(SSA_EV_CALL_DISCONNECT_DONE)
oldst(SSA_CS_CALL_SETTING)cfid(-1
ARBORAL-R#
ARBORAL-R#
ARBORAL-R# -
I set alarms for most calendar events. They work fine if I have the computer turned on when the alarm is scheduled to go off. However, alarms will not show up if they are scheduled to go off when my Mac is not turned on. For example, if I set an alarm for tomorrow to go off at 10am (for an event later in that day), and I start up my computer at 11am, the alarm doesn't show up. I have the "turn off alarms when iCal is not open" box unchecked. Any ideas on what I'm doing wrong? Thanks for any help.
The Entourage alarm will show all alarms that were due (or overdue) when I start up my Mac. I'm assuming that iCal should function the same way? Other than this alarm business, I prefer the Mac Mail/iCal/Address Book system, so I would like to continue using them.Not really, as it works for other people. The next thing I would try is to make a new user, log on as that user, make sure that iCal and Scheduler are in the startup items, and create a couple of events with alarms. Shutdown and restart after the alarms should have fired and log in as the new user.
If the alarms fire, the problem is in some setting or file in your normal account. If not, it is something system-wide. Post back anyway. You can get rid of the new user again - some people keep a spare around for tests like this, but I think it is better for such tewsts to be run in a newly-created account.
I will be away for a couple of weeks, likely with no internet access, so I suggest you start a new topic with a summary of everything tried so far. Maybe someone else will spot something.
AK
Maybe you are looking for
-
We are currently running version 11.0.0. Is there a summary of the changes between 11.0.0 and 11.1.0.2? We are pondering whether to upgrade and are looking for specifics that have changed in the newest version. thx. [email protected]
-
Code to embed image on a page?
I have an image located on my server at the address: http://www.mywebsite.com I have it inside these folders: wp-content > themes > mytheme > images > phone.jpg I am having no luck with the code necessary to embed this graphic on a page. Can anyone h
-
Get the format of current date - urgent
Hi, In my apllication, I want to get format of current Date.Please help me regarding to this. thanks, Hiranmayi
-
Sudden Change in Image Quality
I recently started using my I Sight for conferencing and was quite pleased with the results / overall image quality it provided. It was fine with the daylight setting of my office almost the entire day, and in the evening with tungsten lighting in th
-
Fielding in the input record is delimited by comma and assign to local vari
Dear All, Please help me on below query .thanks in advnace Declare l_sub VARCHAR2(100) := 'a,b,c,d,.......Z'; l_1 VARCHA2(1); l_2 VARCHA2(1); l_3 VARCHA2(1); l_4 VARCHA2(1); l_26 VARCHA2(1); BEGIN I want to fetch the each value separated by comma to