Song could not be played because original file could not be found

Song could not be played because original file could not be found."
how do I fix/replace a damaged library without reloading all of my 3000+ songs?

Hello bartap,
I would be concerned too if I was not able to locate my music in iTunes.  I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • I want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

    i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"i want to play songe in itunes bur all i get i "song could not be used because original file could not be found"

    but they are on my phone and play

  • I can not play a large percentage of my music due to "could not be used because original file could not be found"  How do I locate these files again? Thanks

    So I have not been able to play a large number of my songs duw to a message that reads "could not be used because original file could not be found".  Does anyone know how to locate these files so that itunes will play them again?  Thanks

    by following this document here:
    http://docs.info.apple.com/article.html?artnum=93313
    and then doing something else at the end.
    I followed the instructions from 1-6:
    Then rather than importing the XML file I open iTunes, selected "Add to Library" from the File menu then navigated to the itunes library on my external disc then let it do its work.
    I guess something got fragged when I changed computer but it's all ok now.
    This worked on a Mac I don't know about Windows

  • The song could not be used because original file could not be found

    I just loaded iTunes on my new laptop running Windows 8. I then synced my iPod Nano hoping existing songs would be imported. Songs seemed to come across but when I try to play on my computer I get message - "The song could not be used because original file could not be found." Can anybody help?

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Albums can not play because original files can not be found

    Suddenly about half of my albums in iTunes will not play.  Error message says tunes will not play because original files can not be found.  The other albums still play fine.

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
    tt2

  • HT204406 iTunes Match - can't play because original file can't be found

    Hi, I've uploaded 600+ tracks to iTunes Match and since deleted the original files from my computer - when I go to play them 'via the cloud' only a handful of songs will play, the rest say 'can't play because original file can't be found!
    I assumed the purpose of iTunes Match was to create a copy of all your tracks so you could access them from anywhere.
    Hoping someone can help/offer advice?
    Cheers, Lee.

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
    tt2

  • "song could not be used because original file could not be found..."

    My entire music library files cannot be found. When I click on a song I get a popup that says "song could not be used because the original file could not be found. Would you like to locate it?" I can't find the files anywhere, can't open any from my Windows Media player, from Quicktime or anywhere and can't find them on my hard drive. I have about 2300 songs downloaded from my CD collection and a handful of songs purchased on itunes. I have searched for all "mp3" files, no luck, searched by "title/artist", no luck. Yikes!!

    I've occasionally had an artist or LP go missing from my library, but to have the entire library disappear is incredible!
    Depending upon which version of itunes you are using, you should find your music here: (if it still exists)
    User (insert name here)>Music>itunes music>(Folders for each artist)
    or
    User (insert name here)>Music>itunes media (I think)>music> (Folders for each artist)
    If you find your music folder in either of these places, close the windows, open itunes, from the file menu, select "Add to Library" and navigate to the music folder and select it. Itunes should recreate your library.

  • Song can not be used because Original file can not be located  - HELP

    Hi - Newbie here and I have run into and error and don't know how to fix it. When I try to play a large number of songs from Itunes I get the following message. "The Song (NAME) could not be used because the original file could not be found. Would you like to locate it?" I have no idea where the orginal files are and I am not sure how to fix this error. Could someone please help me out! Thanks - KAggie

    This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
    If the files are nowhere to be found on your computer, but exist on a device, see  Recover your iTunes library from your iPod or iOS device.
    While deleting & reimporting works when the media can be found the process will delete user playlists, ratings, play counts, date added information and any other metadata not stored in tags.
    tt2

  • Error " song can't be used because original file can not be found"

    Our computer was about to crash, so we backed up our iTunes library to disc like it suggested. However, once we imported the library back to the new computer, iTunes will no longer play the songs without the disc in! It says the "original file can not be found" unless the disc is in. How do we get the "originals" off the disc and back onto the computer so I don't have to carry the disc everywhere?? I can't seem to find any help on any of the help sights about this problem. I tried using iTunes Folder Watch like another post suggested and it didn't work. I still need the disc to play the songs.

    Roberta hello,
    The remedy is very easy...
    Open the iTunes folder and select the iTunes Library file and type command -D
    this will make another copy for safe keeping, if anything goes wrong you can always return this copy ... leave the duplicate file where it is.
    Start iTunes in the normal way and open the preferences > advanced > general tab... set NOT to copy files when adding to library and DO keep iTunes Music folder organized.... OK your changes.
    From the file menu select 'add to library' and choose the iTunes Music folder.
    After iTunes has checked and made any adjustments needed have a look and see if any problems still exist ... come and let me know Roberta ... TP
    iMac 800MHz PowerPC G4 17 Flat Screen. G4 iBook.   Mac OS X (10.4.3)  

  • Error message-song couldn't be used because original file couldn't be found

    Had to reinstall itunes onto my laptop and all my music appear automatically in the library with all old playlists, which was great. But now most of my songs show an error message - 'The song could not be used because the original file could not be found. Would you like to locate it?' - I located the correct file for some songs, but even still the next time I open my itunes the same error message appears and to play a song I have to locate it every time I want to play it.
    Please help!
    Thank you,

    Here's what I did. Went to the iTunes preferences. Selected Advanced. Then made sure the iTunes music folder was correct. Unchecked copy files to iTunes folder when adding songs to library. Clicked OK. Clicked on the file menu scrolled down to select add to library. I then went to where on my hard drive my iTunes mp3s are kept. I selected the first groups folder (AH-a) and shift clicked and scrolled down to my last groups folder (ZZTOP) So all groups were selected. Then I clicked on Choose. So my entire library was now added back into iTunes and will now play back. However everytrack was now duplicated. One track that would play and one track that wouln't .
    I then went to this website http://dougscripts.com/itunes/scripts/scripts01.php
    and downloaded, installed and ran Super Remove Dead Track
    v 2.0. My library originally contained 7700 songs. So duplicated it was over 14,000. It took approx. a couple of hours for the script to delete the dead duplicates
    and my library was back to normal.

  • Song can't be used because original file couldn't be found...

    I have already uninstalled and reinstalled the latest version of iTunes. Every song in the library is proceeded with an exclamation point. So I right click on a song, choose Get Info, and above message appears. There's no path listed for the original file. I've checked the preferences in iTunes & the path appears to be correct. How do I correct this? Nothing is updating to my Ipod correctly either.
    HP   Windows XP  

    Here's what I did. Went to the iTunes preferences. Selected Advanced. Then made sure the iTunes music folder was correct. Unchecked copy files to iTunes folder when adding songs to library. Clicked OK. Clicked on the file menu scrolled down to select add to library. I then went to where on my hard drive my iTunes mp3s are kept. I selected the first groups folder (AH-a) and shift clicked and scrolled down to my last groups folder (ZZTOP) So all groups were selected. Then I clicked on Choose. So my entire library was now added back into iTunes and will now play back. However everytrack was now duplicated. One track that would play and one track that wouln't .
    I then went to this website http://dougscripts.com/itunes/scripts/scripts01.php
    and downloaded, installed and ran Super Remove Dead Track
    v 2.0. My library originally contained 7700 songs. So duplicated it was over 14,000. It took approx. a couple of hours for the script to delete the dead duplicates
    and my library was back to normal.

  • My songs disappeared- get message "could not be used because original file could not be found?

    how can I access my songs?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    I have moved my file from my old computer.  Now that I am trying to play songs and movies iTunes says the original file could not be found.  How do I reverse this problem?

    Put the files back where iTunes expects them to be.

  • I received error message that 6 of my songs I purchased on a workout album could not be copied because the file could not be converted. How do I get these 6 songs to download on my ipod shuffle?

    I received error message that 6 of my songs that I purchased on a workout album could not be copied because the file could not be converted.
    How do I get these 6 songs downloaded to my ipod shuffle?

    I can think of only one reason a song would be "converted" while it is being loaded on a shuffle.
    Select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, depending on iPod model, go to the Summary or Settings tab.  There should be a setting there that says Convert higher bit rate songs to 128 kbps AAC (the 128 kbps part may be adjustable).  If that checkbox is checked, try unchecking it.
    NOTE:  This setting may allow more songs to fit on the shuffle, but for any converted song, the sound quality will become inferior.  So I don't use it.

  • Song could not be used bc original file could not be found?

    song could not be used bc original file could not be found?
    I uploaded a bunch of cds into itunes a while ago now, and for some reason more than half my library has this error. Is there anyway to solve this without reloading everything???

    Well usually when this happens you have eaither changed the files location, changed the files or folders name, or somehow deleted the file.
    You have to put it back EXACTLY where it was and with its name

Maybe you are looking for