Song created in GB '08 load incorrectly in 10

I created a song in GB '08 that I opened up in GB 10.0.2 with the intention of adding a drummer track. The song plays fine, but it is attached to the grid off by about 1/2 a beat (if I try to add a new track, it is about 1/2 beat out of sync). First question: is there something I need to do to get it to open aligned with the beat, and if not, are there any thoughts on the best way to realign the tracks so they are in sync with the system?
The tracks are all software instruments.
Thanks!

Show the Arrange Track, click the "+" button in the arrange track, double click the text to edit it.

Similar Messages

Can't import song created in Garageband into slideshow

Hi all, I put together a little tune in Garageband to use in one of my clients slideshows, saved it and have since tried to use it in the slideshow. It wont play. I have selected it in music settings under Garageband where it was saved and it wont work. Also, I imported it into iTunes and when back in iPhoto selected it from iTunes in music settings - still no success. When in music settings, when the tune is selected it will play when I choose the play button, but just not when I run the slideshow.
I can go ahead and import both the slideshow and tune into iMovie, but that takes oodles of time and from what I gather, it shouldn't be necessary. iLife applications are made to work together, right? Seems to me a tune made in Garaageband should work in iPhoto.
Oh, the tune saved with .band as its extension. I have tried to Save As with a different ext, but Garaageband wont allow it.
Any help out there will be greatly appreciated. Monica
Powerbook G4 Mac OS X (10.4.6)

inside garage band you can select from the main menu. 'share', then select 'send to itunes' it will load your song to itunes (it should load it as an .AIFF file), and then you can select it from iphoto,when i creating a slide show there is an itunes button, you will see you song now and can play it.
I just tried this and it worked
in my garage band general preferences i have 'render a preview when saving checked, not sure if this is any thing important.

Home page tabs load incorrectly

I have set certain tabs to open as my home page. When opening, however, Firefox/Aurora/Nightly (all newest v.) load incorrectly a set of old removed home page tabs. I have rebooted the computer and cleaned it with several programs (e.g. Advanced System Care, CCleaner) with no help. Tools --> Options --> Home Page shows the right combination, however. Anything to do?

You can check if you have an user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
you can check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
*http://kb.mozillazine.org/Preferences_not_saved

Can the genre of a song or album in my itunes library be changed? While loading to the itunes library, or after the song or album has been loaded?

Can the genre of a song or album in my itunes library be changed? While loading to the itunes library, or after the song or album has been loaded?

Kay -
Glad it helped. Enjoy the music!
Ed

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

Welcome to the Apple Community.
You can't, but you have a few alternatives.
Best option: If you made the movie on the DVD in iMovie (or even another editing application) and still have the project, go back to the project and export it for Apple TV (using the Apple TV preset)
Next best option: If you still have the original movie that you put on the DVD, open it in QuickTime and export it for Apple TV (using the Apple TV preset)
Worst option: Use something like Mpegstreamclip (Quicktime Mpeg2 playback component required) to convert the DVD to h264.

I purchased two albums from iTunes but neither properly loaded and I cannot play any of the songs. I have prevously loaded other albums with no problems. How do I delete these albums and reload them? I don't see iTunes on iCloud.

I purchased two albums from iTunes but neither properly loaded on my iPad Mini and I cannot play any of the songs. I have prevously loaded other albums with no problems. How do I delete these albums and reload them? I don't see iTunes on iCloud.

If the albums do appear in the Music app, hold down on the album icons and the X to delete will pop up on the icons. Tap the X to delete the albums.
You don't see a anything in iCloud, you see your previous purchases in the purchased tab of the store that you bought the content in. So you find your music purchases in the purchased tab of the iTunes app on your iPad. Tap on Purchased and look for the albums in the Not on this iPad section - assuming that you are able to delete the albums from the device.

Recently I did an update and now can't open iTunes. I get a Runtime Error telling me C Runtime library loaded incorrectly. Please help?

Recently, I did an update on iTunes on my Acer laptop. Now I can't open iTunes & I get a Runtime Error telling me C Runtime library is loaded incorrectly. I have Windows 7 64-bit. Do I need to reinstall iTunes.

Hi sungoddess69,
Thanks for visiting Apple Support Communities.
To resolve this error, I recommend completely removing and reinstalling iTunes and all of its related components using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

Can anyone offer help with Tripadvisor loading incorrectly?

I frequently use Tripadvisor and I'm tired of trying to figure out what the problem is. When I load the webpage and go to read reviews of hotels, it loads these giant PNG files which are supposed to be a small rating bar for each review (it's virtually impossible to view the site because the massive PNG files crowding all the text).
It repeats the problem when I open www.tripadvisor.com in Firefox. As far as I can tell this is the only website the loads incorrectly. Thanks for any help you can give me!
beallio

Hello and Welcome to Apple Discussions...
This is the web site causing these issues, not Safari or Firefox. "As far as I can tell this is the only website the loads incorrectly."
Try their forums for help: As far as I can tell this is the only website the loads incorrectly.
Carolyn

How to create an xml to load swf files in sequence?

hello everyone
I'm new in web design... I know how to animate in flash, using timeline, frames, layers, twins and so on... But I want to move forward so I want to create a xml to load swf files in sequence and in loop. Each swf file has 8 seconds.You can see the example here in www.cm-seixal.pt.
I'm not a programmer but I understand how actionscript works... I hope you can help me
Cheers!
Ana

you can use the urlloader class to load your xml file. use the loader's complete event and the loader's data property to retrieve the data in your xml file.

FPB7 Create Payment Lot after loading Manual Bank Statement

Hello Everyone,
My question is can we create payment lot after loading Manual Bank Statement(FF67).
Thanks,

Hi Imitiyaz,
Transaction code-FF67 (Manual bank statement) is used to enter the bank statement data manually via dynpro. Moreover, since it contains no front end controls so it can be called via batch. You need to develop a custom program to cater the requirement.
You can create a program which creates batch input sessions for transaction FF67. Use transaction SHDB to record the transaction in order to see program, dynpro and field names.
Hope it helps...
Thanks,
Amlan

Info Records were loaded incorrectly

Hi ALL
We need to get rid of some Info Record from system that were loaded incorrectly,
Weu2019re thinking that archiving might be our best option, program RM06IW30.
Please suggest how to proceed.

Hi
First flag all the inforecords for deletion.
Now goto transaction SARA.
Enter the object as MM_EINA - Purchasing Info Records and continue the archiving process
Thanks & regards
Kishore

Why after deleting all 70 gb of movies on my macbook pro do I still show 60gb in the storage section on About this Mac? I am trying to create enough space to load Yosemite.

I am trying to create enough space to load Yosemite.
I currently have about 5.4gb of unused space.
I have deleted about 70gb of movies (all movies from the "files") but still show some 60gb of movies under "storage" in "about this computer". I have no idea where these could be.
There is also about 150gb of "other" that cannot be all the files (I do not have that many )
Would be grateful for suggestions on how to create more space on my computer

Jeff Cane wrote:
I am trying to create enough space to load Yosemite.
I currently have about 5.4gb of unused space.
I have deleted about 70gb of movies (all movies from the "files") but still show some 60gb of movies under "storage" in "about this computer". I have no idea where these could be.
There is also about 150gb of "other" that cannot be all the files (I do not have that many )
Would be grateful for suggestions on how to create more space on my computer
Have you emptied the trash since deleting files?
How many files are on your computer, I would dare to guess that you, just like me, don't actually know that. The 150GB are files on your computer (regardless of whether you think they are not) the next step will be to identify them.

How many tables are created in Master data loading ( Including hierchy )

hi ,
Please anybody , can you tell us how many tables are created in Master data loading ( Including hierchy )
thanks
Phani

Hi PP,
Depending upon the definition of an infoobject, the tables are created when the objects are activated.
/BI<C OR DIGIT>/<TABLE CODE><INFOOBJECT>
<C or digit>: C = Customer-defined InfoObjects
digit = SAP-defined InfoObjects
<table code>: S = SID table
T = Text table
P = Time-independent master data attributes
Q = Time-dependent master data attributes
M = Union of time-dependent and time-independent master
data attributes
X = SID table for time-independent navigational attributes
Y = SID table for time-dependent navigational attributes
H = Hierarchy table
K = Hierarchy SID table
I = Hierarchy SID structure table
J = Hierarchy interval table
Thnaks...
Shambhu

Distribution won't create .cds file or load previous .cds file

I have successfully created a distribution for my CVI8.0.1 application, and deployed it with no problems. However, although the settings work, a .cds file never gets created - I checked in the directory. When I close CVI and start it up again, it complains that the .cds file is missing. My distribution settings are gone, and I have start all over again, from 'Manage Distributions > New' etc. I also can not add a .cds file to the Manage Distributions->Add that I can see in the directory and that has beeen previously created.
This is new thing, I was previosly able to create .cds files and load previously created .cds files. Nothing, as far as I know has changed on my PC. I am running Windows XP. I reinstalled CVI but it did not help.
All of the code is in clearcase, several people (at different times) edit the files in the project and create distributions. Other people also running CVI8.0.1 can create .cds files.
What can I do?
Lorrie

I've made a modified version of cvi.dll to log some operations. Swap the attached version out with the one in your National Instruments\CVI80 directory (make sure to back up the original so you can restore it later). Then launch CVI, open the Manage Distributions dialog, and try to add an existing .cds file. Close CVI, then look for the log file c:\cvi_log.txt and post it back here.
Hopefully if we can figure out what's failing in the add, it will explain why the save is failing, too.
Mert A.
National Instruments
Attachments:
cvi.zip ‏4267 KB

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

I am trying to upload new version iTunes into Windows 7 and getting error message that runtime is loading incorrectly. Cannot connect to online support. Any ideas please?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Song created in GB '08 load incorrectly in 10

Similar Messages

Maybe you are looking for