Song dissapears from libray when double click it.

when i play a song in itunes libray it sometimes dissapears from the libray. Any ideas?

The smart playlist sees that the playcount is NOT zero, and gets rid of it. That's what "live updating" does. It updates the playlist in real life.
If you go click on your library, the song is still there....it just doesn't match the smart playlist rule anymore.

Similar Messages

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

Whew.... got it to work after days of trying to figure.
Got answer here: http://forums.macrumors.com/showthread.php?t=1450821 from zblaze.
Wiped phone completely, restored as NEW iphone through itunes. Checked 'Sync all Music'.
After that happens you can restore from backup.

Excel cant find this file when double clicking to open

Hi,
Our Imacs 10.8.2 and 10.7.3 joined to windows 2008 domain cant open certain excel files from the network share. When double clicking the file or opening from excel -> file open it says it cant find the file. If I drag the file to the desktop then it will open when double clicked. I have tried disconnecting the network drive and reconnecting. I checked permissions and even tried a few cleaner products such as mac keeper and ccleaner and still the same issue. I even upgraded one of the macs from 10.6.8 to 10.7.3 and the issue persisted. Its very strange as some users can open but others cant. Any insight greatly appreciated.
Thanks
Lorne

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Show long text for Quality Notification when double click field in alv

I have an ALV grid called using a FM and I am using the user command routine to do somthing when a particular cell is clicked. I want to call up the root cause text from the action box of the QN via QM03 . I am building a BDC table to call with a CALL transaction but when I write my BDC up to that point, the program is running the BDC but not going to the point where the long text is displayed is i am in mode 'N'.
FORM user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
READ TABLE itab INDEX rs_selfield-tabindex.
CASE r_ucomm.
    WHEN '&IC1'.
      CASE rs_selfield-fieldname.
* When double click on root cause, display root cause long text
        WHEN 'ZZ_URCOD'.
          PERFORM display_root_cause_text.
          CALL TRANSACTION 'QM03' USING gt_bdc MODE 'N'.
ENDCASE.
ENDFORM.                    "user_command
FORM display_root_cause_text .
FREE gt_bdc.
PERFORM fill_bdc USING 'SAPLIQS0'     '0200'      'X'.
PERFORM fill_bdc USING 'RIWO00-QMNUM' itab-qmnum space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_OKCODE' '=10\TAB03' space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_CURSOR'
                         'QMICON-LTURSACHE(01)'     space.
PERFORM fill_bdc USING 'BDC_OKCODE' '=UX01' space.
ENDFORM.                    " DISPLAY_ROOT_CAUSE_TEXT
Any one have any suggestions of know of a BAPI that I can achieve the same thing?
Thanks
Larissa Maryniuk

Hello,
also try to use the messages clause (of type BDCMSGCOLL).
This will return the system messages.
call transaction 'XXXX' using BDCTAB
                                        mode 'P'
                                        messages into MSG_TAB.
Try to change the mode from 'N' to 'P' and try to place a breakpoint and check what happens.
Alternatively, you can read the Quality Notification text using FM READ_TEXT, and then show this data to the user in pop-up, rather than calling the tx.
Hope this helps.

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Wrong file icons - files won't open when double-clicked

Hello,
I have a the following problem on a powerbook.
Most picture files (JPGs, but not bearing the .jpg extension) are not reckognised any more by the system.
In fact, they bear an icon of Terminal exec (a black square with a green "exec" note in the corner).
When double-clicked, they don't open in Preview any more, they act as a terminal app, and won't launch, obviously.
The only way to open them is to go the hard way : in Preview, File menu, Open...
Another way is to change their names by including the ".jpg" extensions, which seems to wake up the id from the system and place back the correct icon and app link. But we have 1000's of pictures...
Painful.
We tried rebuilding OS X desktop, repairing permissions, and update prebinding (using the excellent ToolsX 3.4). No results yet.
Any idea someone?
Thanks,
Powerbook 17 1GHz Mac OS X (10.4.3)

Have you tried selecting a picture, doing command i, for info, then in the info window setting the app for that file as Preview then clicking Change All?
Does ToolsX have a "Rebuild Launch Services database" function
or an update for "whatis" and "Locate" databases?

Movies with iTunes Extras show only HTML code and not title screen when double clicked.

I only noticed this after some iTunes updates. Any movies that have iTunes Extras donot show the "Title Screen" when double clicked. They only show HTML script. I can still watch the movies, and can access the extras by going to the folder they are in, but thats a pain. I have purchased other movies with extras since encountering the problem and have the same issue. I run windows Vista on a 32-bit system. I have all updated drivers. I have searched the web for an answer but couldnt find anything. It is prob something insanely easy. Any help would be appriciated.
Example of text that appears when double clicking:
<!doctype html>
<html>
<head>
     <meta http-equiv="Content-type" content="text/html; charset=utf-8" />
     <meta name="hdtv-fullscreen" content="true" />
     <meta name="hdtv-cursor-off" content="true" />
     <title>Paul (Unrated) [2011]</title>
     
<script type="text/javascript" src="TuneKit/src/TuneKit.js" charset="utf-8"></script>
     
     <link rel="stylesheet" href="css/shared.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/home.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/chapters.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/features.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/more.css" type="text/css" media="screen" />
     
     <script type="text/javascript" src="controllers/data.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/home.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/chapters.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/features.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/more.js" charset="utf-8"></script>
</head>
<body>
     <div id="bleed">
          <div id="navigation">
               <img id="pic0" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
          <img id="pic1" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
               <img id="pic2" class="picBLANK" src="images/home/Paul_mm_background_02.jpg"/>
          <img id="pic3" class="picBLANK" src="images/home/Paul_mm_background_03.jpg" />
          <img id="pic4" class="picBLANK" src="images/home/Paul_mm_background_04.jpg" />
          <img id="pic5" class="picBLANK" src="images/home/Paul_mm_background_05.jpg" />
          <img id="pic6" class="picBLANK" src="images/home/Paul_mm_background_06.jpg" />
          <img id="pic7" class="picBLANK" src="images/home/Paul_mm_background_07.jpg" />
          <img id="pic8" class="picBLANK" src="images/home/Paul_mm_background_08.jpg" />
          <img id="pic9" class="picBLANK" src="images/home/Paul_mm_background_09.jpg" />
          <img id="pic10" class="picBLANK" src="images/home/Paul_mm_background_01.jpg" />
               <div id="vid" class="vid_bg">
                    </div>
          </div>
     </div>
</body>
</html>

The fix from this other post worked for me.
https://discussions.apple.com/message/17691332#17691332
FIX:
Go into "Get Info" and set the Album name to the name of the movie for both the movie and the "Extra". This will fix it.

Audio and video don't open together in viewer when double clicked

Hello everyone!
I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
Heather

Thanks for the advice.
The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
Thanks
H

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

In my iPhoto library, only some images appear as thumbnails. The rest are blank but appear briefly when scrolling through or properly when double clicked. Any ideas?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

There is an exclamation pt. next to several songs in itunes. When I click on that song, it can't locate it. When I click on locate, it pops up a menu with numerous files. I'm afraid to click on the files. What's going on?

There is an exclamation pt. next to several songs in itunes. When I click on that song, it can't locate it. When I click on locate, it pops up a menu with numerous files. I'm afraid to click on the files. What's going on?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

When double-clicking thumbnails, images "mosaic" or "tile"

Since the Snow Leopard Graphics Update, images flash briefly in a jagged "mosaic" or "tile" manner before they convert to full size when double-clicking thumbnails. This happened briefly right after installing the update, then went away after a restart, but now it's back. Running Aperture 3.0.3 on my MBP 2.5GHz with OS 10.6.4.

Thanks for your replies guys. First I don't know happened to the screenshot I posted but here it is again. I hope you guys were/are able to get anything from it.
When I first noticed the issue I backed up my iPhoto library. Next I upgraded to Snow Leopard since this computer was running Leopard. I also upgraded to iPhoto '09 since it was running an older version. Still no fix. I then uninstalled iphoto and its pref files with appzapper and then reinstalled iPhoto '09. Again no luck. I then created a new user account and the same thing happens- no fix.
@Terrance- I opened the app Monolingual and I see that the default languages selected include: Austrailia, Canada, New Zealand, UK, and US English, which I deleted. The Language just "English" is not selected and was not deleted. Could this be it?
Thanks again. I will look into the links you provided, Madison and will be back to report with points.

Problem while displaying the data when double clicked on JTable element

Hi All,
i have one List box( JList ) and one table (JTable). Both JTable and JList are positioned on the same Frame. I am able to drag the elements from JList to JTable and also i have added the mouse click action on both List box and JTable.
if i double click on JList element, that will popup one dialog box.
if i double click on JTable cell element that was dragged from JList, that will popup same dialog box which was opened earlier for JList action.
But my problem here is:
Suppose if i drag the four elements one by one from JList to JTable and (after four elements dragged) double clicked the first element which was dragged first that displayed the popup dialog box structure correctly but the data displayed in that was not correct. It is showing the data of recent dragged element( i.e, fourth element).
But if i double click on JList element that is showing the correct data according to the double clicked element.
What might be the problem here, why it was not displaying the correct data when double clicked on JTable element.
Please help me here.
Many thanks in advance.
The following code is used in mouse clicked event method of JList
private void listMouseClicked(java.awt.event.MouseEvent evt) {
         if(evt.getClickCount()==2){
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
}                AND The following code is used in mouse click enevet method of JTable.
private void tableMouseClicked(java.awt.event.MouseEvent evt) {
        if(evt.getClickCount()==2){
         int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));
         int col=table.columnAtPoint(new Point(evt.getX(), evt.getY()));
         if(row==-1||col==-1){
             return;
          Object obj=table.getModel().getValueAt(row, col);
         if(obj==null||(obj.equals(""))){
           }else{
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
     }            Thanks & Regards,
Maadhav....
Edited by: maadhav on Jul 1, 2009 7:22 AM

I doubt it is related to your problem but:
int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));Why are you creating a new Point? Just use evt.getPoint().
Object obj=table.getModel().getValueAt(row, col);Don't get the data through the model method, get the data through the table method:
Object obj = table.getValueAt(...)
This way it will work even if the table happens to be sorted.
Instead of creating a AssigningResourcesUI object, just disply the value retrieved from the model. That way you know whether the problem is with the mouse event code or your UI class. Like Walter suggested above I"m guess the problem is with your UI class.

When double click in picture frame turns blue and dont increase size

When double click in picture frame truns from yellow to blue but doesnt work. It does nothing. If select full screen it dont work either

You are welcome

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

How to get the alv grid report in another screen when double click on basic

Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.

On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
    ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
    ls_fieldcat-fieldname = 'AUFNR'.
    ls_fieldcat-scrtext_m = 'Service Order'.
    ls_fieldcat-ref_table = 'AUFK'.
    ls_fieldcat-ref_field = 'AUFNR'.
    ls_fieldcat-col_pos   = 1.
    ls_fieldcat-outputlen = 12.
    ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
    APPEND ls_fieldcat TO fcat_valid.
Hope this helps.

Song dissapears from libray when double click it.

Similar Messages

Maybe you are looking for