Song file and info in iTunes does not match what plays

Hi I have a question. I purchased an album in the iTunes store and it worked fine. A few days later it was released that the iTunes Plus version was available and I could upgrade it. So I did that. After I did that I know notice that the file on my system and in iTunes does not match the song that plays. The order in the system and iTunes is correct. Is there a way that I can fix this so that the file and the title match the correct song without having to delete it and repurchase the album?

Don't repurchase it - you'll just be out more money.
contact itS and report this problem.
http://www.apple.com/support/itunes/store/browser/
Their first reply will be nonsense, but reply back to THAT and you may get somewhere.

Similar Messages

  • Count and size of photos in iTunes does not match what is on my iPhone

    I have 2 different iPhone 6 phones. For each of them, the number of photos on the phone does not match the number of photos shown in iTunes. For example, one of my iPhones has fewer than 400 photos; however, when I connect the phone to iTunes on my computer, the usage bar at the bottom shows that there are more than 2500 photos accounting for 2.5GB. I suspect that iTunes is including photos that I have deleted from my phone. Are the additional 2100 "phantom photos" actually taking up space on my phone, and what can I do to make iTunes match what is actually on my phone?

    Read here   https://discussions.apple.com/docs/DOC-8281

  • Even after syncing with iTunes, the usage amount on iTunes does not match what is on my iPhone.  iPhone says I have less that 1G of storage left, while iTunes says I have 6G of storage.  Why is this??

    I can't tell how much storage I have left on my device.  Even after syncing, iTunes shows that I have 6G of storage left.  My phone says I only have 325MB of storage left.  When I try to update my apps on my phone, I'm told that I don't have enough space available.  Why is this, and how can I correct this?  Thanks!

    Howdy mamat2004,
    Thanks for using the Apple Support Communities.
    From your post I understand that even though you have imported and deleted all of the photos from your iPhone, it is still showing as if the photos were still located on the device.  To start troubleshooting this issue I'd like you to please reset the iPhone.  If the issue persists then please put the device into recovery mode, and then select the option to Update in iTunes.  Choosing this option will reinstall iOS without erasing any of your personal data.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

  • My ipod has duplicate songs on it, but my iTunes does not.  How do I remove the duplicates from my ipod?

    After the last couple updates to my ipod it has created duplicates of songs to it.  My iTunes does not contain any duplicates, but my ipod does.  Is there any way I can remove the duplicate songs from my ipod?

    If the duplicate copies all have the same date then you could do show duplicates, then sort by date added, and delete those with the new date.

  • HT1918 I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play.  Any suggestions?

    I have 2 Apple ID's, how do I delete the old one as its interferring with my new account and the music I have already purchased through ITunes does not want to play.  Any suggestions?

    Why would you create a new account?
    All purchases will be tied to the account from which they were purchased.
    You will have to authorize your computer for all the accounts from which music is purchased.

  • HT1414 I "Erased all content and settings" and now my itunes does not recognize my iphoe when i plug it in. Plus my iphone is stuck with the apple symbol on it and wont do anything. what did i do?

    I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?    

    Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

  • I have downloaded and installed Lion. iTunes does not launch when I connect it to my mac.

    Hi.... i have downloaded and installed Lion. iTunes does not launch when I connect it to my mac. The correct box is ticked in 'Summary'. Any ideas? Thx. The same thing happens with my ipad.

    Hi there Bry,
    If you want to be able with out it syncing automatically, you can disable the automatic syncing feature following the instructions in the article below.
    iTunes 11 for Mac: Require a prompt before automatic syncing
    http://support.apple.com/kb/PH12120
    Hope that helps,
    Griff W.

  • The free space for my iphone on itunes does not match the free space on my iphone after syncing.

    The free space for my iphone on itunes does not match the free space on my iphone after syncing. iTunes shows 6.7 G free, but my iphone shows 6 G free. Why such a delta?

    They've never sussed this out - been a problem the last year or two for me regardless of all the new iOS versions and iTunes versions. Regardless of multiple resets and full restores.  Mine showed 3.7 avail on computer, less than .5 on phone.  I did a reset and full restore.  It helped - but still differs dramatically - now showing 5.8 avail on computer but only 2.9 on phone.
    APPLE!!! I have spent 10s of thousands on your products both at my business and home - why?  "Because it just works" I've been telling people.  Not sure if I can keep on saying that if you don't get this figured out!!

  • HT3702 When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times.

    When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

    When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

  • Lightroom v. 3.6 and Sony A99 RAW does not match

    I recently bought the newest Sony A99 camera, but it seems L.v. 3.6 does not manage this (aparently new) type of RAW-pictures.
    Do I have to buy the L.v.4 or can I use v. 3.6 with changing some settings?
    Thank you

    Hello mJim,
    It works. Thank you for your help.
    Eugene
    2013/3/30 jim01403 <[email protected]>
       Re: Lightroom v. 3.6 and Sony A99 RAW does not match  created by
    jim01403 <http://forums.adobe.com/people/jim01403> in *Photoshop Lightroom
    - View the full discussion<http://forums.adobe.com/message/5192043#5192043

  • When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

    When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

    Greetings anabeqiri, 
    Thank you for contributing to the Apple Support Communities. 
    The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
    Why can’t I select None when I edit my Apple ID payment information? - Apple Support
    All the best,
    Jeremy 

  • Installed new harddrive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do

    Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
    you have a couple of options:
    Do a clean install of Snow Leopard via Install DVD.
    Clone your old hard drive to your new hard drive via Carbon Copy Cloner
    Or click on the link below to give you a better idea.
    Hope you get it sorted out.
    http://pondini.org/TM/14.html

  • IWeb 09 published site does not match what I've created!

    So after working countless hours on a website, I finally finished it and used Cyberduck to upload the files. Once it finished I was so excited to check out the website only to find that a lot of the content does NOT match what I have created on my desktop iMac. Even widgets youtube and html snippets aren't working, but are working fine within iWeb as I have created the site. The fonts have uploaded all wrong and even borders and frames look different or aren't there all together. Also, the Google Map widget is causing some error through cyberduck upload and says it can't load it. How come my iWeb site looks great on my computer, but is totally hosed when uploaded to the FTP server? I'm freaking out and am desperate for help.
    The website is www.mikewarobickgolf.com
    I'm running Lion as well.
    What do I need to do to get all the content of my iWeb site uploaded properly to the server? Please help!
    If I am already screwed from running iWeb 09 with Lion, can you recommend an iWeb replacement? I'd rather get the site up now with iWeb and work on replacing it a later time if at all possible.

    You need to upload the Scripts folder to get your Widgets to work.
    Try getting the full embed code for your Google map and pasting it into the HTML Snippet rather than use the Widget. According to Cyclosaurus ( the only person outside of Apple who seems to understand widgets), the Google maps widget won't work when MobileMe closes down at the end of the month.
    I don't recommend any of these apps. As long as iWeb functions OK after the end of the month, I would continue using it until something better comes along.
    In theory, Flux is probably the best bet since its a hybrid of code entry and drag and drop. In my opinion its too complicated and is not going to produce leaner code unless the user learns how to work with an external stylesheet. By the time you add inline styles and all that positioning info you're going to end up with more bloated code than an iWeb created site!
    I don't know why someone can't come up with an app like iWeb that will utilise an external stylesheet and uses code injection and plugins. The big problem with iWeb is that apple didn't allow third party developers to create new widgets and responsive templates.
    The main reason that I stopped using iWeb for new sites is that it can't produce responsive designs for mobile devices such as the iPhone. To extend its life, I did come up with an idea for producing a mobile version which may help some iWeb users...
    http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html

  • Match Regular Expression does not match what Match Pattern does

    I have read through a lot of posts about how Match Pattern does not match what Match Regular Expression will due to not processing some characters.
    However, I found a problem with the other way. A simple Reg-Ex that works in Match Pattern but not Match Regular Expression.
    What I have here is just an example. I want to use Match Regular Expression so I can specify some sub-matches.
    The reg-ex is for: one or more non-numeric characters, a space, one or more numeric characters. At the start of the string.
    How can I get this working in Match Regular Expression? I am working in LabVIEW 2010f2 32 bit. Here is the code snippet and the results:
    Rob
    Solved!
    Go to Solution.

    Robert Cole wrote:
    I think I prefer the ~ for negation since ^ is also used for beginning of the string. But we work with what we have.
    Let me offer you a tip and perhaps defend the honor of the regex a little bit.  One of my favorite features of regexes is the ability to specify character classes (and their negation).  One of the reasons I have to think about the ~ versus ^ is that I rarely use ^ in a regex alternative. 
    Some examples:
    [0-9] = \d (digit)
    [^0-9] = \D (not a digit)
    The equivalent regex for your case is: \D+ \d+

  • Changed info in iTunes does not save

    I change the info on songs or albums and iTunes, but iTunes does not save the changes the next time I open iTunes

    I highlighted the albums that hadn't tx and then <command i> (get info) assigned a genre to each album, then clarified the sync instructions to include entire music library, then everything went over.

Maybe you are looking for