Song just slowed down and died - can't reboot, can't charge...

Ipod is dead - while playing, the song just slowed down completely, warped like a dying cassette tape player, and then froze. Nothing on screen. Tried to recharge - pc doesnt' recognize, no icon on ipod, rebooting many times doesn't work.
Is there any hope? Is this symptomatic of a dead-in-the-water battery or a shot disk drive? I'm traveling in India for another month so can't send in for service until I return to US...any advice or insight would be greatly appreciated.
Thanks!
Ipod 5th Gen Video 30G Windows XP
Ipod 5th Gen Video 30G Windows XP
Ipod 5th Gen Video 30G Windows XP

Have you tryed Charging the device for atleast 20min since this problem?
If yes,
Try to Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If the device still does not respond. You should try to restore the phone.
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try to force device into recovery mode.
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/TS3281
(Or you could try going to your closest apple store)

Similar Messages

Flash html5 - How can i make an internal movie clip slow down and stop when it get to a certain frame?

I am creating an automotive braking system using flash and have a wheel turning. I want the wheel to slow down and stop after the brake pedal is pushed at a certain frame. I know I could do this with frame by frame animation but was hoping there was a short cut - javascript?? If not the slowing down portion then is there code for just making the internal movie clip (wheel turning) to stop when it gets to a frame.? Thanks

you can use the ticker class to create a loop that you use to control the wheel's rotation or frame, TweenJS v0.6.0 API Documentation : Ticker

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

Ever since I downloaded Mountain Lion my computer has slowed down and frozen at times. Is there anything I can do to speed it up?

Ever since I downloaded Mountain Lion my computer has slowed down and frozen at times. Is there anything I can do to speed it up?

How much memory is installed?
Here is a large list of articles related to performance issues:
https://discussions.apple.com/docs/DOC-3521
http://www.reedcorner.net/mpg/
http://support.apple.com/kb/PH10798
http://osxdaily.com/2012/10/11/mac-running-slow-reasons/
https://discussions.apple.com/thread/4542409?start=0
https://discussions.apple.com/thread/4122175?start=0
http://www.speedtest.net/index.php
https://discussions.apple.com/thread/3289614?start=0
https://discussions.apple.com/thread/3928756?start=0
http://www.whyismymacsoslow.net
http://www.slowmac.net
http://www.all-about-apple.com/slow-mac-performance-learn-how-to-solve-it/
http://www.chriswrites.com/2009/04/17-reasons-why-your-mac-is-so-unbelievably-sl ow/
http://www.macworld.com/article/1159699/troubleshooting_speed_passwords.html

Hi, while listening to a song my iPad music shut down and I can't open it any more. Do you know how to fix this? iPad 2

Hi, while listening to a song my iPad music shut down and I can't open it any more. Do you know how to fix this?
iPad 2

Try closing the Music app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Music app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Music app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hi, while listening to a song my iPad music shut down and I can't open it any more. Do you know how to fix this?

Hi, while listening to a song my iPad music shut down and I can't open it any more. Do you know how to fix this?

Did you try quitting the Music app and then restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

How do I fix a Safari application that slows down and freezes everything?

Apple called last fall and said my particular Mac had a hard disk problem and they replaced it at the Apple store in late January 2013. I backed up the information on an external harddrive and used Time Machine before to transfer all the information to the new drive. Everything worked well and I finally put on Mountain Lion at 10.8.4. I also have Carbonite as a backup and it apparently was not enabled when I transferred the files until early May. In early May I had not used my iMac for about a month and when I started it I found about 40 named file folders on the Desktop that were empty. Some of those had named items in them but when I clicked on them they would dissappear. The actual files did exist and were not effected when I dumped the apparent alias folders. Safari started and would be ok at first but if I went away for an hour it would slow down. I took it in to the Genius Bar at Apple and they ran some tests and got rid of MacKeeper which they felt was causing the problem. I got my Mac back home and it still started slow but worked well at first and then started going slow. If I opened Word it would also start working at a slower speed. I needed to force quit Safari and the Word progran in order to quit or restart the Mac. I got an appointment for the next day and they ran all sorts of tests and the hard drive was working normally. They tried tweeking different areas and sent me home again. When I started working again it did the same thing, I would start out fine and eventually slow down and needed to be force quit to get out of it. A message came up indicating my MasOSX startup disk had no more space available for applications memory. I took it in a third time and the Genius went to the Activity Monitor and the Safari PID was 221 and %CPU 107, Threads 21 Real Mem 2.73 GB, Virtual Mem 22.00 Kind, Intel (64). I had no idea what that meant. I went home again and it still ran slow and couldn't run the programs for any length of time before it ran slow and affected the other programs so they would only quit if I used Force quit. I took it in for the forth time an they decided to keep it overnight. They ran ASD first to rule out memory. They noticed during the appointment the computer was slow to perform normal tasks such as showing boot options, booting into user, bootingto external user. If the ASD passed then they would perform erase and install and only restore users and application files from backup drive. They did this on Wed and Thur. night and I took it home Friday night, June 14 and it still has the same problem. Typing this message right now means typing and waiting for the words to appear.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.

I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.
My laptop is still on; it just has a black screen that I can't get rid of without shutting down the computer by holding the power button.

Hey there lynmrigg,
It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
Apple computers: Troubleshooting issues with video on internal or external displays
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order.

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Macbook Pro laptop (early 2013) sudden slow down, and heats up while sleeping

Hi! I need help with my Macbook Pro laptop (early 2013) that suddenly slowed down, and heats up while sleeping. It slowed down 3 days ago. I want to know what checks I can do to find what is wrong with my laptop. Thank You

Hi! I did reset SMC but it did not work but thank you. Now, my hard drive crashed, bought a new one, but unfortunately my laptop does not detect the new hard drive so that where I'm at. Im not sure if I need to format the hard drive, replace an internal part like the connector of the hard drive to the logic board or the new hard drive is broken.

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

My iphone just shut down and i cannot get it started again

my iphone just shut down and i cannot get it started again

Hey Barry,
It really depends on the circumstances. If you haven't powered your phone off yourself for quite some time, sometimes kinks can just happen and this sounds like one of them. Every so often on mine I will have to use this method but it is in the very minority of occasions.

Flash causes Firefox to slow down and even freeze (and on a gaming laptop, too). How to fix this?

Every time I use the Flash plug-in (for videos on YouTube or PutLocker or whatever), FireFox just slows down a lot and even freezes. It happens very often now and it's really annoying.
By the way, I am using a gaming laptop so I am not sure why I am having these problems. My Flash plug-in and firefox are updated to the latest versions, too.
My specs:
Windows 7 Home Premium
Intel i7-2670QM CPU @ 2.20GHZ (8 CPUs)
nVidia GTX 560m 3GB vRAM dedicated
16GB RAM

Okay, so I uninstalled and reinstalled it. That helped only for about ten minutes and it started doing it again.
I don't know what else to do. :S

Song just slowed down and died - can't reboot, can't charge...

Similar Messages

Maybe you are looking for