Song on the map

beskrivning på svenska längst ner
You open the function that requires location feature and see where you are on a map. On the streets around you and you will see that it randomly located songs released as pins. The songs come partly from your own playlists, starred songs, friends' most listened songs + new music from your favorite genres. You start the function. Now when you walk past a song and put it into a list for the next playing songs. Do not like the song so you can easily switch the controller on the headphone cable or directly in the cell phone will play the next song up. The app also records the number of steps / speed / walking route. Depending on your walking pace so placed songs on the map at regular intervals. You can also easily select if you want a song will never be randomly selected for you, a song you do not like.
Although it sounds silly, so I think it can be good pure PR strategically. It will be a hot topic in friends and in social media, traditional media also teaches them latch on to. Can be tickled feature for some brains, even though it may be perceived as a nonsense-function I think
Description in swedish:
Du öppnar funktionen som kräver platsfunktionen och ser vart du befinner dig på en karta. På gator runt omkring dig så ser du att det slumpmässigt ligger låtar släppta som knappnålar. Låtarna kommer dels från dina egna spellistor, stjärnmärkta låtar, kompisars mest lyssnade låtar + ny musik från dina favoritgenrer. Du startar funktionen. Nu när du promenerar förbi en låt så läggs den in i en lista för nästkommande spelande låtar. Gillar du inte låten så kan du enkelt byta genom kontrollenheten på hörlurssladden eller direkt i mobilen så spelas nästa låt upp. Applikationen registrerar även antal steg/hastighet/promenadrutt. Beroende på din promenadtakt så placeras låtarna på kartan med jämna mellanrum. Du kan också enkelt välja om du vill att en låt aldrig mer ska slumpas ut åt dig, en låt som du inte gillar.
Även om det låter fånigt, så tror jag att det kan vara bra rent PR strategiskt. Det blir en snackis i kompisgäng och i sociala medier, traditionella medier lär även dom haka på. Kan vara en kittlade funktion för somliga hjärnor, även fast det kan uppfattas som en nonsens-funktion tror jag

Step 2:
Make sure that you have "Show iTunes in the Cloud Purchases" enabled in your iTunes preferences by going to iTunes > Preferences under the Store tab. Then, click OK.
I'm lost about this - I clicked the Store tab, but there was no Preferences . . .

Similar Messages

No map showing in the map app in standard view just arrows,distance and directions on grid okey in hybrid and satellite modes, ios 8 installed just the grid

Brand new iPod touch no map showing in the map app in standard view just the grid with arrows and distances, okey in hybrid and satellite view ios 8 just installed don,t no whether it was okey before that. Thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why is the map content on a iPhone different from OS X 10.9

Hi,
I have a question regarding iOS Maps on an iPhone and Maps included in OS X 10.9.
I viewed on both devices exactly the same area.
But the contents of the maps were different.
On iOS Maps on the iPhone some main streets were missing. These streets were shown in Maps on OS X 10.9.
Does Apple deliver different contents of maps to an iPhone and to OS X 10.9 ?
Thanks.
Regards
lowlevelmission

FIXED: there was a song that had a corrupted file

TS1463 Itunes could not copy (name of song) To the ipod (name of ipod) Because an unknown error occurred (-50)

Itunes could not copy (name of song) To the ipod (name of ipod) Because an unknown error occurred (-50)

I had this problem with a new album I downloaded this week from Amazon. It looks like they changed their cloud player download functionality within the last few weeks.
I previously tried the steps listed here: http://support.apple.com/kb/TS1539
I had also tried Windows Updates and a few other suggestions I found on this topic and nothing had worked.
In iTunes, when I right-click on the track to "Get Info," I noticed it lists WHERE at the bottom of the Summary tab to show where the file is located. It said the file was located in \\?\C:\mp3\... Amazon automatically downloads my mp3's to this directory and imports them to iTunes. I assumed there was something wrong with the mapping, due to the \\?\.
If you notice your files are not mapped to a valid location:
Highlight the affected tracks and press the <Delete> key on your keyboard.
Select the Remove option when prompted to remove the files from your Library. Take care to Keep Files if prompted so you don't completely remove them from your computer.
Locate the files on your computer and drag them to import back into iTunes. If you check the location mapping in Get Info, the directory should now be valid.
I think the USB workaround above might resolve this issue, but this probably helps to explain that the files locations weren't referenced in iTunes correctly in the first place.
Message was edited by: artfuldodgr42

My iPod touch is not playing the songs on the playlists in the correct order. Can anyone help?

My ipod touch is not playing the songs on the playlist in the correct order.

You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Error while deploying the mapping in owb 10gR2

Hi friends,
when i tried to deploy the mapping firstly i got the below error like
Name
Action
Status
Log
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 11, column 3: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 18, column 59: PL/SQL: ORA-00942: table or view does not exist
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 33, column 3: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 40, column 59: PL/SQL: ORA-00942: table or view does not exist
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 216, column 7: PL/SQL: SQL Statement ignored
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 237, column 59: PL/SQL: ORA-00942: table or view does not exist
From the above error, it states like table doesn't exist. Hence after checking that the source table connections that i used in the mapping seems to be wrong.
so what i did is, in the control center i right clicked the source module where i have used source table and changed the connection but soon after i pressed the ok button as a part of registering i got the below error like
>> RTC-5318 Invalid Location Type pair for Name oracle db and version 11.1
I ignored the above error and continued to deploy the mapping, but as a result of mapping i got the below error like
Name
Action
Status
Log
None
INFORMATIONAL
ORA-04052: error occurred when looking up remote object [email protected]@PEOPLE_SOURCE_LOCATION ORA-00604: error occurred at recursive SQL level 1 ORA-02019: connection description for remote database not found
COPY_OF_ORG_FINAL_MAPPING
Create
Warning
ORA-06550: line 0, column 0: ORA-04052: error occurred when looking up remote object [email protected]@PEOPLE_SOURCE_LOCATION ORA-00604: error occurred at recursive SQL level 1 ORA-02019: connection description for remote database not found
Not sure, where im missing.
Kindly help me friends,
Thanks
Brgds,
Mini

Hi Vidyanand,
Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
Note that there are 4 database roles being created when you create a runtime repository owner:
- OWB_A_<runtime repository owner>
- OWB_D_<runtime repository owner>
- OWB_R_<runtime repository owner>
- OWB_U_<runtime repository owner>
If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
Thanks,
Mark.

Error while Executing the mapping

While I am executing the mapping this error is thrown by the server. It is big mapping and references many parent tables.
ORA-12801: error signaled in parallel query server P001 ORA-01114: IO error writing block to file 201 (block # 523269) ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file OSD-04026: Invalid parameter passed. (OS 523275) ORA-01114: IO error writing block to file 201 (block # 523269) ORA-27069: skgfdisp: attempt to do I/O beyond the range of the file OSD-04026: Invalid parameter passed. (OS 523275)
Can you please provide the solution for this.
Thanks in advance.

This seems to be a DB server error, not an OWB issue. You should contact Oracle support.
Regards:
Igor

After purchasing songs at the itunes store, ipod touch will no longer synch with the itunes library at all. Also a lock symbol is now on the ipod touch. How do I fix this

After purchasing songs at the itunes store, my ipod touch will no longer synch with the itunes library at all. It won't send the purchases to the device and it won't synch any other music to the device. Also a lock symbol is now displayed at the top of the ipod touch. How do I fix this.
This was the first purchase I made.

Are you following these instructions?
iTunes: Syncing media content to iOS devices and iPod
Where is the lock icon on the screen?

Songs on the iPods "administrators iPod" cannot be updated because all of t

When I try to update my mini iPod I get the following message. Songs on the iPod "administrator's iPod" cannot be updated because all of the playlists selected for updating no longer exists.
Any thoughts on where they have gone? what should I do?

Have a look at this post by forum member Hudgie it may help explain things: Hudgie - iPod cannot sync because one or more playlists are missing

"Songs on the iPod "____" cannot be updated because all of the playlists...

"Songs on the iPod "Harold Kim's iPod" cannot be updated because all of the playlists selected for updating no longer exist."
Im not sure what this means or how to fix it. any sort of advice or help would be greatly appreciated.

You get this problem when the option 'Sync Music - Selected playlists' is being used to sync your iPod. If the playlist selected is deleted from iTunes the iPod no longer has a location to sync from and you get an error. (Syncing selected playlists by the way is a useful setting to use when the iPod is smaller than the iTunes library). However you can make a new one or make use of an existing one.
Open iTunes and create a playlist to update your iPod from, call it -My iPod for example (the dash will position it at the top of the playlists in Sources). You can make it a smart playlist that picks the songs for you or just a normal one and drag whatever content you want to have into the playlist. If you are making a smart playlist limit it to just less than the size of your iPod (for example 3700MB for a 4G iPod Nano. Now connect your iPod and when it appears in the Source list click on the iPod icon to bring up the preference tabs in the main pane. Go to the Music tab and choose Sync Music and the Selected playlists radio button. Choose the playlist you just made from the selection and click Apply. You can also sync from any existing playlists by choosing the same setting, you just need to make sure that the size of the playlists don't exceed the capacity of your iPod:
How to create a Smart Playlist with iTunes
Syncing Music to iPod
To make a random playlist go to File>New Smart Playlist.
Uncheck "Match the following rule"
Check "Limit to" put "3700" in the number box, choose "MB" from the first list box, choose "Random" from the next list box. Check "Live Updating"
When you want to change the selection in the smart playlist just delete everything in it and it will add a new selection. When you want to change the normal playlist just delete out what you don't want and drag in a new selection.
Syncing selected playlists is just like syncing your whole library only on a smaller scale and more "selectively". When your iPod is is set to sync selected playlists it automatically picks up any changes you made to that playlist in iTunes since you last connected. Anything you added to the playlist will be added to the iPod, anything you deleted from it will be deleted from the iPod. In other words the iTunes playlist and the iPod are kept "in sync".

Songs on the iPod cannot be updated beaucse all of the playlists .....

I was trying to update my ipod and my ipod only has 52 songs but my libary has 92 songs. i tried to updated it by left clicking where it said my "RISHI"S IPOD" and clicked update...and this message said "Songs on the iPod "Rishi's iPod" cannot be updated becuase all of the playlists selected for updating no longer exist."
HELP PLEASE WHAT DO I DO!!????

This should sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

There should be a plus and minus for zoom on the maps for iphone

when driving having to use two hands and navigate is troublesome to say the least. I know its cleaner and simper when not crowding the screen or maybe a prgramming issue just seems like it would be easier to use with one hand when driving sometimes if i had the buttons for zooming more safer too. Or maybe not. Because its making you stop or you have to take your other hand off the wheel i can do it with one hand but maybe not everyone can zoom with one hand while driving. Just a suggestion on something apple might want to put into next maps maybe or maybe you wont even need it since now theres turn by turn. It still neccesary for using it on a bicycle or slower moving forms of tranportation where you might need it. Just a suggestion i thought would be helpful and maybe even safer.

yeah but how many people do you think in actuality use it the way you are saying. not me when i drive im always looking for a road to see if i passed it or not and thats because i had to reroute my traffic or im lost and i turn on the map and or i passed something because the map is sometimes off etc... It could be anyting not just the need to not touch your phone.

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

BPM Idoc collection without calling the mapping in BPM

Hi Expert,
I have an IDOC to file scenario in which source side I have to collect multiple IDOC and map it to a single file .I am achieving it through BPM . at present I am using one multimapping and calling this mapping in the BPM under transformation step its working fine but due to some constraint , Now I want to achieve it using BPM but without calling the Mapping in the BPM i.e I don't want to use Transformation step in the BPM. Is it possible ????
Regards,
Saurabh

Hi Saurabh,
If that is the case it is preferable to collect the IDocs in ECC and then send them to XI at one go.
Cheers !
Lokesh

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Song on the map

Similar Messages

Maybe you are looking for