Song panning and other listening effects arent working

My headphone jack recently went out on my 30gb so i bought a new part and put it in. Oddly enough, now certain effects and layers of the song wont play(ex drums will play at times without the main guitar). Is this the jack or is there something i should be checking inside the ipod?

Different ways of doing this:
*If you want to add effects for the different regions on the same track you will have to automize the compressor/Eq/panning settings
*You can setup different tracks with different Fx settings and move the regions to those new tracks - this way you don't have to automize the different parameters
*If you want to destructively edit the regions you can either do that in Soundtrack Pro (select the region and hit shift+w to open it in SP - add you fx in there - save the file and it will be updated in Logic)
or
*rerecord the regions with the fx through a Bus directly into Logic - route the region track to a Bus and select that Bus as an Input for a new Audio track
or
*bounce/reimport the region+fx

Similar Messages

  • MDB and Database - Listener port stops working

    Hi,
    I have created an MDB which does the following when a message is received from the queue.
    1. Store message in database
    2. do some processing
    At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?

    usmanchaudhry wrote:
    Hi,
    I have created an MDB which does the following when a message is received from the queue.
    1. Store message in database
    2. do some processing
    At step 1, if there is any issue with the database connection (e.g. database is not available etc), I rollback transaction. My idea is to leave the message on queue for now and retry it again after some time unless the database is back again. "Maximum retries" of the listener port is set to N but since there is no retry interval available, all N retries are done in a flash and my listener port stops working. I cannot use backout mechanism as I have to wait for the database to be back again. What are my options?i believe you need an XA driver and a transaction manager, for starters.
    a simple JDBC rollback won't do it.
    which app server are you using?
    which jms provider?
    %

  • I have updated my iPhone to iOS7.1.1 and now my wifi arent working properly. It is always disconnected on wifi. Any advice please

    I have updated my iPhone to iOS7.1.1 and now my wifi arent working properly. It is always disconnected on wifi. Any advice please

    Hi there heyapril,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • I just recently upgraded my itouch from 4.1 to ios5, and updated to itunes 10.5. when isynced my music files,ebooks and other apps, all is working except when im trying to sync my video files. it says, canot be synced as cannot be played on this ipod.help

    i just recently upgraded my itouch from 4.1 to ios 5, and updated to itunes 10.5. but when i synced my music files,ebooks and other apps, all is working except when im trying to sync my video files. it says, canot be synced as cannot be played on this ipod. but those are the same files that i have when i was using the old 4.1 version and its syncing just fine.. the itunes advanced tab "create iphone or ipod version" is not working either so i cant convert it to be xferred and synced. what can i do to have my video files synced?

    i had the same problem but i just got a new video converter and made it convert videos to ipod/iphone format and then put them into itunes. i would suggest GOM encoder as the encoder can convert them and then once they're finished converting, put them automatically into your itunes for you. from there you can just sync them to your ipod.

  • My iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

    my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Facebook, hotmail and other sites are not working on safari?

    Facebook, hotmail and other sites are not working on safari. i have tried everything. downloaded google chrome still didn't work. downloaded firefox, still didnt work. tried to update my computer but at the end it always says an error occurs. and i cant find a download for mac os x anywhere.. someone help?

    If you look at the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. It appears you are not the only two having this problem.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Why won't the "block cookies and other website data" setting work on Safari 7.0.2?

    Why doesn't the "block cookies and other website data" setting on Safari 7.0.2 work?  Everytime I try this setting, I still get cookies and other data that needs to be deleted from my computer.

    This has been the case for sometime.
    There is no effective way to block these cookies.
    Try this, may help.
    Safari > Preferences > Security > Cookies and other website data:
    Press "Remove All Other Website Data:'
    Do this twice.
    Select "Reset Safari" from Safari drop down menu.
    Select only "Reset all website data".
    Click "Reset".

  • I upgraded my itunes and now my kindle and other apps won't work.  I shut the ipad off and I resynched it with my computer.  Nothing worked.  What should I do?Help!

    I updated my itunes on my ipad and now my kindle and other apps won't open.  I restarted the ipad and tried to resynch.  Nothing worked.  Any other suggestions?

    Do you mean that you updated your computer's iTunes or the iPad's iOS ?
    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Office 2004 and other applications suddenly stopped working

    All of a sudden I've been getting the following with any Office application, and other applications have been exhibiting strang behavior as well. Specifically the error with any Office is:
    "Application "could not be launched because of a shared
    library error: <"
    I can't even uninstall Office because the uninstall program generates the same error.
    Also, iChat no longer works (opens for a split second then closes without an error msg) and iMovie give the following bizarro error message:
    iMovie requires a “Quartz Extreme Compatible” graphics card. Certain iMovie features such as Themes, Ken Burns Photos, and Video FX may not work properly with your graphics card.
    I'm running an intel iMac (OSX 10.4.8)
    I have tried verifying & repairing permissions to no avail.
    Anyone have any ideas how I can fix this? <br>
    iMac   Mac OS X (10.4.8)  

    Visit The XLab FAQs and read the FAQ on troubleshooting shared library errors.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • FocusListener and other listener problem

    I don't know why i can't catch Deactivated and LostFocus and other relevant event.
    I try to make a simplepanel as Popup because Jpopupmenu have some problem.
    please take a look.
    regards thanks
    import java.awt.BorderLayout;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.ComponentEvent;
    import java.awt.event.ComponentListener;
    import java.awt.event.FocusEvent;
    import java.awt.event.FocusListener;
    import java.awt.event.WindowEvent;
    import java.awt.event.WindowFocusListener;
    import java.awt.event.WindowListener;
    import javax.swing.JApplet;
    import javax.swing.JButton;
    import javax.swing.JLabel;
    import javax.swing.JOptionPane;
    import javax.swing.JPanel;
    import javax.swing.JWindow;
    * Created on Jun 1, 2006
    * TODO To change the template for this generated file go to
    * Window - Preferences - Java - Code Style - Code Templates
    * @author varamthanapon
    * TODO To change the template for this generated type comment go to Window -
    * Preferences - Java - Code Style - Code Templates
    public class SampleMain extends JApplet implements ActionListener,
              WindowFocusListener, ComponentListener, WindowListener {
         private JButton m_objJButton = null;
         private PopupPanel m_objPopupPanel = null;
         public SampleMain() {
              this.getContentPane().setLayout(new BorderLayout());
              JPanel mainPanel = new JPanel();
              mainPanel.setSize(500, 500);
              mainPanel.setLocation(500, 500);
              mainPanel.add(new JLabel("XXX"), BorderLayout.NORTH);
              this.getContentPane().add(mainPanel);
              JButton xbutton = new JButton("xxx");
              this.getContentPane().add(xbutton, BorderLayout.WEST);
              xbutton.addActionListener(this);
              m_objPopupPanel = new PopupPanel(this);
              this.addFocusListener(m_objPopupPanel);
              this.show();
         public class PopupPanel extends JWindow implements FocusListener {
              public PopupPanel(SampleMain obj) {
                   this.addWindowFocusListener(obj);
                   this.addComponentListener(obj);
                   this.addWindowListener(obj);
              * (non-Javadoc)
              * @see java.awt.event.FocusListener#focusGained(java.awt.event.FocusEvent)
              public void focusGained(FocusEvent e) {
                   // TODO Auto-generated method stub
                   JOptionPane.showMessageDialog(new JPanel(), "XXX");
              * (non-Javadoc)
              * @see java.awt.event.FocusListener#focusLost(java.awt.event.FocusEvent)
              public void focusLost(FocusEvent e) {
                   // TODO Auto-generated method stub
                   JOptionPane.showMessageDialog(new JPanel(), "XXX");
         * (non-Javadoc)
         * @see java.awt.event.ActionListener#actionPerformed(java.awt.event.ActionEvent)
         public void actionPerformed(ActionEvent e) {
              // TODO Auto-generated method stub
              m_objPopupPanel.setSize(200, 50);
              m_objPopupPanel.setLocation(200, 50);
              m_objPopupPanel.show();
         * (non-Javadoc)
         * @see java.awt.event.WindowFocusListener#windowGainedFocus(java.awt.event.WindowEvent)
         public void windowGainedFocus(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowGainedFocus");
         * (non-Javadoc)
         * @see java.awt.event.WindowFocusListener#windowLostFocus(java.awt.event.WindowEvent)
         public void windowLostFocus(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowLostFocus");
         * (non-Javadoc)
         * @see java.awt.event.ComponentListener#componentResized(java.awt.event.ComponentEvent)
         public void componentResized(ComponentEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "componentResized");
         * (non-Javadoc)
         * @see java.awt.event.ComponentListener#componentMoved(java.awt.event.ComponentEvent)
         public void componentMoved(ComponentEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "componentMoved");
         * (non-Javadoc)
         * @see java.awt.event.ComponentListener#componentShown(java.awt.event.ComponentEvent)
         public void componentShown(ComponentEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "componentShown");
         * (non-Javadoc)
         * @see java.awt.event.ComponentListener#componentHidden(java.awt.event.ComponentEvent)
         public void componentHidden(ComponentEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "componentHidden");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowOpened(java.awt.event.WindowEvent)
         public void windowOpened(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowOpened");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowClosing(java.awt.event.WindowEvent)
         public void windowClosing(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowClosing");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowClosed(java.awt.event.WindowEvent)
         public void windowClosed(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowClosed");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowIconified(java.awt.event.WindowEvent)
         public void windowIconified(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowIconified");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowDeiconified(java.awt.event.WindowEvent)
         public void windowDeiconified(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowDeiconified");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowActivated(java.awt.event.WindowEvent)
         public void windowActivated(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowActivated");
         * (non-Javadoc)
         * @see java.awt.event.WindowListener#windowDeactivated(java.awt.event.WindowEvent)
         public void windowDeactivated(WindowEvent e) {
              // TODO Auto-generated method stub
              JOptionPane.showMessageDialog(new JPanel(), "windowDeactivated");
    }

    I believe it's because Windows which don't have a visible parent frame are, by default, not focusable. Therefore they're never activated or focused.
    For the window to become focusable it needs a visible parent. Have a look at Window.isFocusableWindow method's Javadoc for information about how this works.
    There's also no point trying to force the window to be focusable using setFocusableWindowState - it still won't work without the visible parent frame.
    What's the problem with JPopupMenu? It seems unlikely that you'll write something better than that.
    Alternatively, you could try using an undecorated JDialog. Personally, I'd try resolving your differences with JPopupMenu!
    Hope this helps.

  • IPhoto and other iLife Apps not working

    About a month ago I was having serious problems with my iMac. Ended up needing a new hard drive, so Apple sent it away, put in a new hard drive, and sent it back. I've had it for two weeks and am just now using some applications (probably should have checked everything when I got it back, oh well), and some iLife stuff and programs that come installed are not opening. I am running Mac OS X 10.4.11 FYI
    What works: Mail, Safari, iChat, Address Book, Itunes, iMovie, iCal, Quicktime
    What doesn't work: iPhoto, iDVD, Garageband, iWeb, Photo Booth
    Just a note, iWeb is the only one that prompts me and tells me that I need to re-install iLife. When I went to download latest iLife update it told me there was nothing to update and I needed to reinstall iLife.
    Also just went into the applications folder again and realized I have both Spaces and Time Machine installed, except they do not work with my OS, so I don't know why they are on there (when I try opening them just to see what would happen it says "does not work with your OS X). Also, Senuti and iPodRip also are not working, so anyone have any ideas as to programs that would let me get my music off my ipod and back on to the computer?
    The programs that don't work just bounce out of dock once then go back down immediately, and do not open at all. I tried installing the software bundle package from my OS X install disk but while the install was seemingly successful it did not change anything. So AAGGHH what do I do???
    Thanks in advance!

    I have the Core 2 Duo in the white case, released late 2006. Definitely have been running Tiger on it (just checked and I am running 10.4.11), sent it away, got it back, and just noticed that these programs don't work and I have programs native to Leopard inexplicably on the computer for some reason. I don't really want to remove them though cause I would like to have them on in case I have to go to the Apple Store so I can point it out to them and ask some questions about why Tiger (the OS installed on the computer) applications are not working while Leopard applications are installed even though they don't work and shouldn't be on there.

  • TS1702 I updated song pop and now it won't work

    I updated song pop and now it won't even open the page

    Try the basic steps?
    Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or delete the app and reinstall it. Tap and hold down on the app icon until it wiggle then tap the X on the icon to delete it. Tap the home button when done. Download the app again.

  • How to configure itune to speaker and other sounds effect to internal speak

    as subject, how to configure itune to speaker while other sound effects to internal speaker, i done it before, but cannot remember how to configure it, thanks.

    after upgrading to 10.5.6, it work by setting sound effect plays on "internal speaker" while sound plays on "line-out"
    thanks everyone.

  • MY BBM , BLACKBERRY WORLD, FACEBOOK APPS AND OTHER IM APPS STOPPED WORKING ON MY HOME WiFi CONNECTION

    Please I am wondering if anyone will have solution to my BBM problem , I am presently using my blackberry on home wiFi connection as I have ended my contract with my network provider(virgin). The BBM, IM applications ( yahoomessenger, window live, AIM, talk) ,my facebook apps and blackberry world were all working fine even with different wifi connection. But recently I am unable to use all these above mentioned applications more importantly my BBM as I needed it badly to communicate. Initially , I thought it was the internet connection at home but I found out the browser and two other applications I have are working perfectly. I don't know if anyone will have an idea of any solution to this problem. 
    I would appreciate any effort towards solving this problem.
    Thanks

    BBM requires an active BlackBerry data plan. As for others, try downloading the latest version of App World from www.blackberry.com/appworld and then update your Facebook and Twitter apps, most should work via WiFi only.

  • E72: Swedish and other special characters not work...

    When I send mail through MfE, swedish and other special characters do not reach the recipient, they are just ignored. No blanks or nothing. Every word with a swedish character ends up one letter short.
    Before the firmware upgrade this was intermittent, happening only on about half of my mails.
    Now I upgraded yesterday, and it seems the problem is now permanent.
    Have seen similar posts from E75 and E90 owners, their problems seem to have been fixed by newer firmware.
    Our setup is: Exchange 2003, Portwise authentication.
    All other phone models work fine, like iPhone, E71 etc.
    /Sebastian

    After some testing I found out that if I use swedish chars in the subject line, it works fine. Even in the mail body.
    If I don't use swedish chars in the subject, they won't work in the body. I either get garbage or nothing where the swedish chars should be.
    The problem doesn't exist at all in my private IMAP mail account.
    Could someone who uses Mail for Exchange and have special chars in their alphabet (swedish, finnish, german, hungarian etc) pls tell me how it's working out for you?
    Message Edited by Seb_Martin on 28-Jan-2010 11:15 AM

Maybe you are looking for