Song transfer to menu won't take, shows a red #1 by the green plus

I have tried all the methods to make a music transfer to main menu, but nothing will play.  I don't get a wavy line in the sound well, and clicking doesn't work. What does the red #1 with the green plus mean when I select a song to add to menu?  Music will play on my sub menus.

Try switching themes and switch back to the one you're using. Drag the default audio out of the bin and add the new audio track from the Media Browser again. Be sure to have this button turned on:
The Red #1 and Green plus indicates that you are adding 1 audio track into the audio bin:
OT

Similar Messages

  • Recently my text won't visually show up when I use the text tool. Help!

    recently my text won't visually show up when I use the text tool. Help!

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • When trying to click on menus on USAA, it shows "javascript:;" in the bottom left hand corner and the menu won't work in FF 21. But the menus work in IE 10.

    whenever I go to USAA.com on firefox, I can't click on any of the drop down menus. Instead, a box in the bottom left corner (where a link address would usually show) pops up with "javascript:;". If I use IE10, the site works perfectly. I prefer Firefox so it drives me a little nuts that I have to switch browsers for one site. I've removed all my cookies, cleared the cache, reset Firefox, and run Firefox in safe mode. The website still refuses to play nice. All the regular links on the site work but the drop down menus won't.

    Hi TrinityFire, thank you for the update. It seems wrong that a site could limit you to using one method of "clicking". I wonder whether there is a Firefox setting to always ensure that mouse clicking will work even if your device has a touchscreen?
    Could you check these two preferences and see whether they make any difference:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''touch''' and pause while the list is filtered
    (3) Try double-clicking the following to toggle them to false:
    dom.w3c_touch_events.enabled = <s>true (default)</s> ''See Note''<br>
    dom.w3c_touch_events.expose = true (default)
    You might need to restart after changing these settings before they take effect.
    Does this switch the site from touch to mouse click? Or make it stop working altogether?
    ''Note: dom.w3c_touch_events.enabled requires a numeric setting, see cor-el's post below.''

  • IPhone won't take pictures until I upload to the cloud

    My iPhone all the sudden won't allow me to take any more pictures until I upload them to the cloud.  I recently removed about 50 pictures, thinking maybe I had too many pictures, not the case.  Any suggestions?

    Is Yahoo Mail an exchange account?
    No. Unless you were issued your phone by you employer, you don't have a sysadmin controlled exchange account.
    What OS version are you running? Any "modifications" or jailbroken?
    If you can see the Camera icon, it's not likely there are restrictions enabled on the camera function either, but a good idea to check:
    Settings > General > Restrictions > Off
    Do basic the basic troubleshooting steps described in the User Guide:
    1. Turn off and restart phone.
    2. Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    3. Restore phone in iTunes using a backup.
    4. Restore as a new iPhone.
    If 4 doesn't fix it there may be a hardware failure of the camera, requiring evaluation by Apple.

  • How can I reset my IPad?  It won't take my code and it is the only one I know I have.

    How can I reset my IPad?  I've tried twice and had the passcode that I use to unlock my IPad rejected.  Should I be using my apple.com password?  I'm afraid to try again as it might lock the IPad.  I don't remember any other code.  My Wifi and 3G won't work.

    Your password for your Apple ID is not the same as the passcode for the screen lock on your iPad unless you set it that way deliberately, enabling the extra-long passcodes (the standard is a four-digit number). If you have a passcode to the screen lock that you've forgotten, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.

  • HT4993 My app store says i have six updates, but won't load/show them when i open the app store and go to the updates. How do i fix this?

    For about two weeks i've been trying to get my updates, but nothing works. I've power cycled my phone. Reset my data connection. Closed out apps. And nothing seems to work. If anyone has any tips on how i can get my updates to open so i can download them, it would be hugely appreciated.

    Software troubleshooting in order...
    Restart: Press and hold the Sleep/Wake button until the Power Off slider appears. Power off then power back on.
    If no change...
    Reset: Press the Sleep/Wake button and the Home button at the same time for ten seconds until the Apple logo appears. Note: No data will be lost
    If no change...
    Restore: First from backup... If no change as New > http://support.apple.com/kb/HT1414

  • Why won't this show (same) four pages in the Adobe Reader?

    %PDF-1.6
    3 0 obj
    <</Type /Font /BaseFont /Times-Italic /Subtype /Type1 >>
    endobj
    6 0 obj
    <</Length 158 >>
    stream
    1 0 0 1 50 200 cm /X1 Do
    1 0 0 1 0   200 cm /X1 Do
    1 0 0 1 0   200 cm /X1 Do
    1 0 0 1 200 -400 cm /X1 Do
    1 0 0 1 0 200 cm /X1 Do
    1 0 0 1 0 200 cm /X1 Do
    endstream
    endobj
    4 0 obj
    <</Type /XObject /Subtype /Form /BBox [0 0 1000 1000] /Resources <</Font <</F1 3 0 R>> >>
    /Length 77 >>
    stream
    BT /F1 18 Tf 0 0 Td (18 Point) Tj ET
    BT /F1 25 Tf 0 50 Td (25 Point) Tj ET
    endstream
    endobj
    5 0 obj
    <</Type /Page /Parent 2 0 R /Contents 6 0 R /MediaBox [0 0 595.27 841.88] /UserUnit 0.5 /Resources <</XObject <</X1 4 0 R>> >>
    >>
    endobj
    2 0 obj
    <</Type /Pages /Kids [5 0 R 5 0 R 5 0 R 5 0 R ] /Count 4 >>
    endobj
    1 0 obj
    <</Type /Catalog /Pages 2 0 R >>
    endobj
    xref
    0 7
    0000000000 65535 f
    0000000745 00000 n
    0000000667 00000 n
    0000000010 00000 n
    0000000297 00000 n
    0000000517 00000 n
    0000000085 00000 n
    trailer
    <<
    /Root 1 0 R
    /Size 7
    >>
    startxref
    796
    %%EOF
    Works OK with Chrome's reader......

    1. It may surprise you, but more than 50% of the problems which people ask about with PDF generators turn out to be related to the exact byte layout, and disappear (or get worse) with copy/paste. People with tools for PDF examination like to be able to use them and know they are working on the exact/same file.
    "But why can it not do that."
    Because the question is unanswerable. Imagine an API call
    PageObjectGetPageNumber().
    Given object 5 0 R and asking for the page number, what is the correct answer - 1, 2, 3, or 4? This is of more than academic interest. For example, the page object might be the destination of a link, and an interactive viewer needs to know which page to navigate to. So, while a simple PDF viewer could display it, many things might not work.
    ISO 32000-1 doesn't forbid it. But there isn't much mileage in taking the high ground and saying that one is making good files but Acrobat isn't compliant.

  • When I open my email (all accts) the body of the email is blank.  It won't even show you "download remaining" at the bottom of the email.  My iTouch and iPad all work just fine.

    When I click on my email (all email accts) the body of the email is blank.  There isn't even the words "download remaining" at the bottom.  Sometimes there is the word "loading" in the middle and then nothing.  I have an iTouch and an iPad.... they both open my mail just fine.  I have also compared the settings on all three and see nothing different.  I have also synced and done a hard reset and still no email.  Please anyone with some suggestions will be appreciated.

    Try with Flash clean install
    *http://forums.adobe.com/thread/928315
    for more
    *http://forums.adobe.com/thread/1215076

  • My MacBook Pro won't charge when I plug it in. the green or orange light won't even turn on. The computer is dead already, so I cannot mess with my settings. What do you suggest?

    I have a Mac Book Pro with the serial number: C0*******TY3 and the model no: A1278. I wanted to charge it this morning, and it won't charge meaning that the light even won't turn on, and also my computer is dead, so I cannot change anything on the system preferences. What should I do? I will make an appointment at the Genius Bar, but what do you thing the problem is here?
    <Edited By Host>

    First see the MagSafe troubleshooting tips:Apple Portables: Troubleshooting MagSafe adapters and check to see that all looks ok.  You might want to try using another charger in case the charger is faulty.  If that doesn't help, take the MacBook Pro and charger to an Apple store genius bar and have the technicians test the system to see where the fault is.

  • Am i able to upgrade purchased SD shows to HD, similar to the "itunes plus" feature?

    wondering if, like itunes plus, i'm able to upgrade purchased SD shows to HD, without having to pay the $60 for the HD season?

    No.
    Sorry.

  • Ical icon in dock shows a red circle with the number 1 in it

    There is no event for today and I can't make it go away. I can't quit ical either, I can only force quit it. Any ideas?
    thank you in advance

    I found another post that dealt with this along with the answer.
    thanks

  • Recently downloaded and (tried to) installed IOS 8.1 for my iPhone 6 (16GB) and now all it does is load the white screen with the black Apple logo and then crashes and shows a red screen. The cycle then repeats. Suggestions?

    Title says it all.

    Hi Cornelius6505,
    Thanks for the question. If I understand correctly, the iPhone does not start up past the Apple logo. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Not responding or does not turn on
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • My voice in waveform shows in red while my other podcasters waveforms stay centered

    Hi, internet,
    My friends and I started a podcast and I'm the audio engineer.  I noticed that my voice waveforms are different from my fellow podcasters.  Their waveforms stay centered on the line and only increase vertically (above and below) based on their volume.  Mine on the other hand does that but also gets uncentered.  The waveform shows horizontal red lines in the middle.  See picture below.  The first couple seconds is my friend talking and the rest is me.
    Please also see the sound file here:  https://dl.dropboxusercontent.com/u/12007759/redline_waveform.wav.
    My voice is kind of high in general so I'm guessing that's the cause but maybe I'm wrong.  Am I setting my Open Broadcast Software settings incorrectly?  Or my Windows 7 mic recording settings wrong?

    Thanks for your suggestions.
    Just to clarify, the audio track has multiple persons speaking - my friends' vocals are normal while my vocals are the ones with the DC offset issue.  I'm not capturing vocals separately to save time.
    I also forgot to mention that my headset was hooked into my USB keyboard (Logitech G110) via the USB port.  So the chain should have been:  Logitech G930 -> Wireless USB -> Logitech G110 via USB port -> On-board sound card (Realtek High Definition Audio) via USB port -> OBS set to force microphone/aux to mono, mix/aux boost 1x -> Logitech Gaming Software (latest version) -> latest drivers.  However, I don't think the keyboard interface mattered because of my additional tests.
    I've tried two of my old headsets now.  I first tried plugging my G930's into my desktop PC directly in the back USB port.  Still had the same issue.
    I then tried my TekNMotion headset (cheap POS).  Regular 3.5mm jacks.  It worked!  No redline and no need to do DC Offset Correction.  No issue except I had to work around with the settings and I think the best setting was using AGC (auto gain controller) and setting the Recording to 70 percent.
    I also tried an xStatic SP headset (also a POS but is compatible with Xbox 360).   Output/playback is a 3.5mm cable but the microphone input is USB.  Worked also.  The microphone quality was decent.  Probably a tiny bit better than TekNMotion.  However, I dropped this headset a while back so there's a loud hissing noise coming from it.  No settings would affect the hissing noise.  (Gotta give this to Best Buy to recycle).
    So I guess the issue must stem from the Logitech G930 headset and/or headset drivers.  Yeah?  No?
    I also tried using the DC Offset Correction favorite on my audio.  Thanks for letting me know about that Bob!  The only issue with that is my voice still sounds like its passing through a filter.  Is there anything technically bad about using the DC Offset Correction?  I'm guessing audio professionals try to stay away from this and just use better equipment.  Here's what my waveform looks like after its processed:
    So I think my best bet is to start using my old $16 TekNMotion Yapster headset.  It's not USB wireless like the G930's are and the ear cups are awful after wearing them for more than 10 minutes.  However; they work I guess.  I'll try them out for a few episodes.
    Now I have to decide if I should keep switching between the $100 G930's and the TekNMotion OR just use the TekNMotion for everything I do on my computer.  OR sell my G930's.

  • HT3819 When I sync my iPod some of my purchases from iTunes transfer, but some do not.  When I try to drag the songs onto the iPod icon it shows the 'crossed out' symbol and won't move them.

    When I sync my iPod some of my purchases from iTunes transfer, but some do not.  When I try to drag the songs onto the iPod icon it shows the 'crossed out' symbol and won't move them.  I've tried synching from multiple computers that are all connected with home sharing but it still didn't do the trick.

    Installing iTunes does not cause content to magically appear on the computer.
    Your media is only where you put it.
    iOS devices are not backup devices.
    Copy the media from the old computer to the new computer.

  • Some songs transfer, some won't, no rhyme or reas

    Likeit says, I recently traded uh... "up", from a Zen touch to a Zen Vision:M, they both seem to have thisweird, sometimes a track will transfer, sometimes it won't, and the GUI freezes up on the stuch transfer box. Only occasionally will it give them the grace of a error box with the "transfer could not be completed due to an unknown error" (for the Touch), and the new "...because of a thread exit or application request" for the visionThese are just files I've encoded myself no stings attached, files I've downloaded, and any other kind, and it seems the same. I don;t see why it keep choking on them. Once they're in there, they work fine, but I'm down to reansferring them one at a time, and praying each one works...
    and once it's got into it's mind that it won;t take a file, no amount of renaming/retagging/RE ENCODING will make it change its mind. If I use format, it *might* take it. but I'm still playing the roulettewheel that it will or won;t with any given file.. Odd, they transfer to the player's data folder fine, just not into music
    Any help?
    (XP: SP2 - did the same thing on straight XP)
    <SPAN class=time_text>
    Message Edited by ConstRucti've on 05-9-2006 0:45 PM

    let's just doublecheck some things quickly. do any of the affected songs play in itunes at the moment? if so, when you play them, do they ask to be authorised?
    if so, does the authorisation go through successfully, or do you get an error message? (if you get an error message, let us know what it says. include error message numbers if you're getting any.)
    if the authorisation seems to go through successfully, with the authorised songs sync to the ipod?

Maybe you are looking for