Songs aren't playing through...need some help here

Hey guys,
All of sudden, my songs won't play through like a playlist anymore. Like, once the song finishes, Itunes just doesn't go to the next one. It stops. Now I have to manually click the new song on the list every time I want to hear something. It's getting very frustrating and I was wondering if anyone new how to fix this.

Regarding the songs not playing through, I noticed none of the songs in my library had the little tick mark beside them. I ticked a few of them and they played from one to another. I went through my whole library, ticking everysong and no the problem is fixed. I only have 733 songs so it didn't take me too long. I don't know of a short way of doing it.

Similar Messages

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Need Some Help Here From The Pros....

Hi all...Im new here you see. I have some questions here..
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
Please help....

Hi!
1) May I ask if anyone could just tell me how to actually create a partition like Windows do in Mac OS? I need the partition to do my backups and save some of my important documents.
With your external drive attached, open Disk Utility, found in Applications/Utilities. Choose your drive on the left, and use the Partition tab to set up the number and type of partitions. Partitioning will delete all data on the drive.
2) Can we actually create a password to secure certain of my files so that anyone wants to browse it will have to enter the password? Is it possible to do that?
Don't forget that the Mac, just like Windows, is multi-user. You can set up a user for yourself and one for guests or specific people. Nobody can see anybody else's files. You can lock your computer when you go away from the desk if you want absolute privacy.
Or, you can create an encrypted disk image (also using Disk Utility) to store private files if you really want to stick with one user account.
3) Im also trying to use Visor(i cant remember the name, it's a software to enable Mac to run windows without the boot camp) but i tried on my friend's Macbook, I cant use the MSN camera function... Anybody have any idea??? Or it's not compatible with the camera built-in.
Do you mean VMWare Fusion? I believe iSight support is included in the VMWare Tools - when you're running Fusion, there's a menu option to install/update those tools.
4) I want to use "3D Studio Max", its it compatible with Mac OS??? and will it be laggish if i uses macbook 13" white?
I believe it's Mac only, so you should check the Windows specs (RAM requirements, graphic card VRAM, etc) to see if you can run it within a virtual Windows on your Macbook.
Matt

My new K7N2-Delta need some help here!

Recently i bought a brand new k7n2 delta L and i need some advice on how to overclock with this new mobo, with the km2m it was piece of cake but this is a little bit more complete. I will appreciate the help and tips in this matter more over because my first attempt resulted on a non responsive system :P no post to be more clear.
Thanks in advance.
By the way my cpu is an athlon xp 2000+ tbred (i don't know if it is unlocked)

read all this first
https://forum-en.msi.com/index.php?threadid=40413&sid=
https://forum-en.msi.com/index.php?threadid=32088&sid=
https://forum-en.msi.com/index.php?threadid=38822&sid=

ITunes Match is driving me nuts! I need some help here please!

iTunes Match hast been stuck in the Step 2 forever, 17286 out of 17287 Songs Checked, it will always get stuck there, and this is everything I've tried so far to solve the issue:
1) Stopping the process, and turning it back on again.
2) Updating iTunes Match in the Store Menu.
3) Signing out of the iTunes Store and signing back in.
4) Quiting iTunes and restaring the application.
5) Restarting the Mac.
6) Converting all the "Waiting" iCloud Status songs to ACC 256 VRB kbps Version, deleting the originals, keeping just the converted ones.
But nothing seems to work, it will just stay there and do nothing.
I've managed to Match 13193 songs and Upload another 2964 songs, but once it has stopped uploading and here I am.
Guys, if something similar has happened to you, and you've figured it out by doing something I haven't tried yet, please let me know, it will be much appreciated.

Try the dedicated iTunes Match forum: https://discussions.apple.com/community/itunes/itunes_match

VOICE over UDP need some help here

I have attached a vi i have been working on and i am having a litte trouble. I want to do somethink like voice over ip. Currently i have a setup that broadcasts the data to a client. The mic is sent over udp to the clients speakers and vice versa. I ingore anything that comes from one's one ip address. This works just great, but the problem is i need more than 2 on at a time. I dont want to mess with entering specific ip address ect. At most i only want to have to enter ones own ip address as i have in the example.
When i start running 3 of these vi's on separate machines, i can probe the address which the data is being received, and it seems to only get data from one address, not two like i would expect. Is there a buffer being cleared when read or something? Any help would be appreciated.
Thanks
Dave
Attachments:
UDPVOICE.vi ‏70 KB

Here is how I have dealt with the port problem in the past (albeit, not
in labview, but lets hope LabView's usage of UDP is consistent with
other programming languages ) is you always have clients connect to
a listen port on the server. You will have a thread watching for
incoming connections on that port. When one is detected, you
create a new "personalized" connection for that client to use to
communicate with the server. Part of this process involves
assigning that conenction a new port. This assignment is
dynamic--the server just assigns some random available port (so in
other words, you don't have to hard code one in).
So once a client connects, the server responds from the new port, the
client receives that datagram and checks where it came from (address
and port) and sends all future messages to that port on the server.
Does this make sense? I'm afraid I won't be much help with
anything aside from theory as I haven't actually played with the
network functionality in labview--all my network programming comes from
C and Java.
As to combining the sounds, I'm afraid I don't know. I think the
simplest system would be a half-duplex system whereby clients can only
send data when they are not receiving it (or rather, 1 person talks at
a time). I can understand how this isn't ideal. I wonder
how this is accomplished in other, similar voice-chat programs?
One final thought: I'm not sure, but I'd be willing to make a wild stab
in the dark and say you might run into bandwidth problems if you're
transmitting an unencoded (uncompressed) voice signal. This is
undoubtably more complex than you want to get, but you might look
around for ways to reduce the amount of bandwidth you're going to
use. And if you'd like examples of programs that will allow this
kind of chat go check out Teamspeak (http://www.teamspeak.org/) or
Skype (http://www.skype.com/). Both these programs allow
multiuser voice chat (teamspeak is intended for chatting with your team
in video games). Skype is a very professional, very high quality
voice chat program that works more or less the same, with higher
quality voice. Oh and both are free
--R

I really need some help here....Please?

Hey guys i have posted numerous threads regarding this issue but to no avail so im going to try one last time.
Basically, Itunes works fine UNTIL i start to sync, Then it freezes up for a while then starts to sync a little bit...Then freezes and syncs a little bit..And so on..
It took me 2 WHOLE days to sync 15 episodes of southpark.
I transfered some movies and songs to my wifes laptop and it sync'd everything in around 50 seconds flat, So its now obvious that it must be my PC.
I have USB 2 and i have 6 slots, I have tried ALL the different USB slots and it stays the same.
Does anyone have ANY idea what this could be?
I spoke to the guy who built my PC and he is changing the USB ports, He also said if that doesn't work he will change my motherboard..
Is there a simple solution to this? Am i going to have to change Motherboard? ANY help would really be greatful.

Hold your horses....
Have you done some "rule out" testing? How do you know that the USBs are bad? How do you know that the MB is bad?
1/ do all ports work when you plug a mouse in them?
2/ what is a throughput when you plug a flash drive into these USBs (try 1 at a time) and copy a large file onto it? Test all the ports and compare speeds - are they at least 5-10 MB per sec? If yeah, then they are OK - system wise.
If the USBs don't work and it's a PCI card, look for drivers and if no luck, buy a new card.
If the USBs are built into the MB, then you have no other choice but to replace it, but only as the very last resort. Seems to me that he's trying ot hose you, my friend.....
IN any case, it could be the drivers! Or..iTunes. Did you try to remove & reinstall?

GS60 2PE Hopeless really need some help here!!!

Hey MSIer, I just did a complete wipe on my hard drive and now there's totally nothing left on the drive like really nothing so what I wanna ask is that how do I get back all the pre installed software including windows 8.1 itself, how?
Does anyone out there don't mind taking some time to help list down a guide on how to get back to how the laptop originally was(all the pre installed software including windows 8.1 iitself)? Your help is really much much much muchhhh appreciated!!! T_T

Quote from: Syrellaris;112053
You should be able to restore using the Recovery Discs you made(if you made them..) or by pressing the F3 key during bootup.
Though, if you wiped all partitions on the hard drive, including the normally hidden recovery partition you are kind of screwed.. in that case you need to send it in for repair, but it will not be fixed under warranty.(if you dont have Recovery disc's)
Quote from: JakeSully;112055
Yeah best option when getting a new laptop it is to create a recovery dic or USB recovery and atleast .iso recovery to that way incase you wipe everything on hard disk you can restore every partitions that was wiped including recovery partition that has copy of windows 8.1 64 bit that comes pre-installed.
I didn't do any recovery disc and have yet to try the F3 button that you mention. So let say even if the F3 is not working I'm totally screwed right?

Hey Guys, I need some help here

Im doing some create view and create procedures for my work.
In creating view, its just done perfectly.
However with create procedures work, I got some problem with the result.
So here is the coding:
create or replace
PROCEDURE "USP_EDW_CASH_MARGIN"
result_cursor OUT TYPES.cursor_type
AS
CURSOR v_cursor IS
SELECT
to_char (CM100,'99999999999999.99'),
to_char (CM101,'99999999999999.99'),
to_char (CM200,'99999999999999.99'),
to_char (CM300,'99999999999999.99'),
to_char (CM301,'99999999999999.99'),
to_char (CM310,'99999999999999.99'),
to_char (CM320,'99999999999999.99'),
to_char (CM400,'99999999999999.99'),
to_char (CM401,'99999999999999.99'),
to_char (CM402,'99999999999999.99'),
to_char (CM500,'99999999999999.99'),
to_char (CM720,'99999999999999.99'),
to_char (CM730,'99999999999999.99'),
to_char (CM740,'99999999999999.99'),
to_char (CM999,'99999999999999.99')
FROM VW_CASH_MARGIN a;
v_id varchar2(100);
v_row varchar2(4000);
v_clob CLOB;
v_buffer varchar2(10000);
BEGIN
v_id := 'EDW_CASH_MARGIN';
DELETE FROM TBL_INTERFACE_DATA WHERE cd = v_id;
INSERT INTO TBL_INTERFACE_DATA (CD,INT_DATA,DT_CREATED)
VALUES (v_id,EMPTY_CLOB(),(SELECT CURR_PROC_DATE FROM TBL_PROC_DATE));
SELECT INT_DATA INTO v_clob
FROM TBL_INTERFACE_DATA
WHERE CD = v_id
FOR UPDATE;
OPEN v_cursor;
v_buffer := '';
dbms_output.put_line(LENGTH(v_buffer));
LOOP
FETCH v_cursor INTO v_row;
EXIT WHEN v_cursor%NOTFOUND;
if (length(v_buffer) + length(v_row)) < 10000 or v_buffer is null then
v_buffer := v_buffer || v_row;
else
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer), v_buffer);
v_buffer := v_row;
end if;
END LOOP;
if LENGTH(v_buffer) > 0 then
DBMS_LOB.WRITEAPPEND(v_clob, LENGTH(v_buffer)-1, v_buffer);
end if;
CLOSE v_cursor;
OPEN result_cursor FOR
SELECT 'success' AS status FROM dual;
END;
After i run this coding.
I got these errors :
1)Error(46,5): PL/SQL: SQL Statement ignored.
2)Error(46,5): PLS-00394: wrong number of values in the INTO list of a FETCH statement
It says that the error is with this code "FETCH v_cursor INTO v_row;"
Can someone please help me.

ok let me explain with emp table.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_name);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into one variable.
So i'm getting error like this
ORA-06550: line 7, column 1:
PLS-00394: wrong number of values in the INTO list of a FETCH statement
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_ename VARCHAR2(2000);
v_sal NUMBER(10);
BEGIN
OPEN c;
LOOP
FETCH c INTO v_ename,v_sal;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_ename||v_sal);
END LOOP;
CLOSE c;
END;Here i'm selecting 2 columns in the cursor and getting into two different variables.so no error.
DECLARE
CURSOR c IS SELECT ename,sal FROM emp;
v_row c%rowtype; -->record type declaration
BEGIN
OPEN c;
LOOP
FETCH c INTO v_row;
EXIT WHEN c%NOTFOUND;
Dbms_Output.put_line(v_row.ename||v_row.sal);---> Here i'm mentioning which column to be printed
END LOOP;
CLOSE c;
END;Same thing i'm getting all columns variable into the records so no error.
and also pls read this
How to ask question
SQL and PL/SQL FAQ

Ipod is not recognized in Windows or itunes...Need some help here!

I have the ipod connected via the USB cable. I have the newest updated program and itunes installed. For some reason the iupod is not being recognized. anyone know what i can do??

What's on the screen of your iPod?
Try resetting it: Make sure the hold switch is OFF so that there's no orange color showing. Then hold down the MENU and SELECT (center) buttons for about 10 seconds, and you should get an Apple logo on the screen. When you do, you can release the buttons and try again.
You can also try connecting the iPod to a different USB port, preferably one on the back of the computer if you're on a desktop computer.
If that doesn't help, try these:
http://docs.info.apple.com/article.html?artnum=61711
http://docs.info.apple.com/article.html?artnum=93716
CG

I need some help here please!

i am working on a website thats going to be a friend loop
such as facebook myspace classmate etc. im in the proccess of
making the site now and i was wondering what i need to to to enable
useres to be able to login and create a profile page on my site?
how can i do this using DW2004 what am i looking at here? also
anyone who would be interested in helping e-mail
[email protected] we have the site up on a server but we are
far from done

> such as facebook
> myspace classmate etc. im in the proccess of making the
site now and i was
> wondering what i need to to to enable useres to be able
to login and create a
> profile page on my site?
hire a team of skilled programmers, put them in a cage and
toss money at
them.
or spend a lot of time learning how to do it yourself.
or try a free or commercial pre-written application
http://www.hotscripts.com/search/?q=myspace&cat=All&page=1&sort=&license_typ
e=free
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

I need some help here. someone please respond with some type of idea.

okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.

okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and
it's just a constant green light in the front that
wont go away. it wont play, and wont have any affect
on the buttons or anything. it's just a steady green
light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.
See if this helps:
http://docs.info.apple.com/article.html?artnum=303332

Really need some help here!!

Right chaps. Been with bt 16 months now(contract due to run out in dec) been paying my bills on time and not running up high bills..my monthly base cost is around 47 pound per month..
Direct Debit is around 62 pound per month and ive just recieved an email saying its going p to 82 per month!!!!1
how can my direct debit be nearly double my monthly bill when we hardlys use the phone (mobiles all the way)
im on unlmited inf 2 (so no extra bb charges),never misses any bills,always bee on time.
Im just stumped as to why my direct debit is going up and not down.
Any help?

Welcome to the forum. The Monthly Payment Plan strikes again! There's no point in trying to guess how the payments are determined as the system works (if that's the correct word) in unfathomable ways. It might be possible to get them amended, or even do it yourself in MyBT, but surely enough it will go wrong again at some point.
Do yourself a favour and switch to monthly billing. It's very reliable in my experience, and once it's up and running you're simply billed each month for the next month's standing charges plus any one-offs (eg call charges) incurred during the previous month. There are a couple of downsides in that any substantial one-offs can't be spread over several months and that you can't change your direct debit date (which is fixed at 8 days after the bill) but that's a small price to pay for the reliability. If you switch while you are in credit, the balance will be set against subsequent bills until it's used up.
You can click the white star next to this message if you think it was helpful.

Songs aren't playing through...need some help here

Similar Messages

Maybe you are looking for