Songs getting mixed with each other

Say 2 of the songs in my library are Song1 and Song2. On my iPhone Song1 starts actually as Song1 but the last part of it is Song2. This problem does not happen in my pc or imac itunes libraries and it does not happen with all songs.
I have reset my iPhone to factory settings and performed a fresh install without restoring from a backup more than once. The problem keeps happening. I have searched and found no one with the same problem.
Has anyone here encountered this? Any idea on how to solve it?
I'm using an iPhone 4 with iOS 5.1 though the problem is there since I started using iCloud (release date in the netherlands).

Yes, I have the same problem, particularly with longer tracks (7-8 minutes +).  I've tried deleting the song from my iphone and re-downloading, but doesn't help the problem.  I was playing a song earlier (11+ minutes) and only about 2:30 actually played... the rest was just silence this time, not a random song mixed in...

Similar Messages

  • All contacts doubled or tipled and mixed with each other!

    All my contacts and my fiancee's contacts on her phone went screwy since the last time we synced our phones. We never even sync our contacts ever - it's unchecked in iTunes, yet somehow we have all our contacts doubled or tripled and mixed up. For example there will be 3 "John Smith" contacts, one might be correct, but another will have a wrong address, phone number, e-mail, company etc. It's totally random and there's no consistency to the screw up.
    I did just get mobile me when I upgraded to the iPhone 4 (my fiancee didn't get a mobile me subscription) so I'm wondering if mobileme somehow screwed up my contacts? But if so, how did they screw hers up?
    Does anyone know how to fix this? or at least prevent it from happening again? As it stands now, I'm asking everyone on facebook and in my e-mail to re-send me their contact info. grrr.

    Graham,
    For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc.  For the iphone you should use it's phone number, but an e-mail could be used for it too.  If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
    http://support.apple.com/kb/HE68

  • New bug in 8.02 - regions confused with each other

    So, I just updated to 8.02, and loaded up a recent project that was half finished (bad idea).
    Now I have some strange bugs going on that I never had before, and they are basic issues.
    My audio regions keep getting confused with each other.
    I have an audio region that I can't open in the sample editor. When I double click on it, the sample editor will bring up the last region I edited, not the new one. I've re-named the region, deleted it and re-added it to the arrange window, but this region will not open in the sample editor.
    I can see it in my media bin, and preview it there, and it plays in my arrangement no problem, but I can't get it to open in the sample editor. In fact sometimes when I click on it, with the media window open, I can see another sample being 'selected' in the media window instead of the proper audio region.
    Scott

    finally i find someone else with the same prob, o already post into apple.com too
    yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
    however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
    - no matter both power pc / intel soffer of this bug
    - i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
    so i really don't know how to solve it, cause there are only few people that have this problem
    big mistake and big mistery

  • Pdf documents merging with each other

    Hi all
    I am facing a problem regarding writing pdf documents using iText. I have an application that generates different pdf documents using a common function that generates the pdf. Problem occurs when two or more people generate pdfs. Most of the times the pdfs get merged with each other, which is a serious problem. Please help me regarding this.
    Thanks
    Gurpreet Singh

    sounds like this fuction of yours is making use of a static variable or two.

  • HT1386 My husband and I traded ipod with each other. Now, I am unable to put my entire library on the ipod. Only some songs imported. HELP

    My husband and I exchanged ipods with each other. I attempted to import my whole music library to this current ipod. only certain songs imported. Not all. How do I get the WHOLE library to this ipod?

    if I sign in my iTunes on my husband's computer, will it delete his iTunes library?
    LOL!  If Home Sharing deleted the other person's library, then Home Sharing wouldn't have too many users, would it?
    Seriously, Home Sharing sounds like a fine solution to the need you express. 
    However, your question suggests that your library is not backed up, right?  You and your husband should each make a backup of your libraries.

  • I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

    I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

    Graham,
    For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc.  For the iphone you should use it's phone number, but an e-mail could be used for it too.  If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
    http://support.apple.com/kb/HE68

  • When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Getting 4  swf files comunicate with each other on server

    Hallo
    I would like to ask anybody, may be a bit hard question.
    Firstly the example I'm talking about
    issue">http://www.kiamotors.cz/showroom/ceed_test.aspx
    home">issue
    site. See the flash movie on the bottom. That's it. Those are 4
    diferent swfs. The problem is, as you could noticed, load time of
    each other. If you want to ask why the hell you just wount make 1
    falsh video, put that white cross on top of it if u like the effect
    and ur done. But believe me or not I just simply can't. Site's
    useing special CMS where is 4 divs for 4 swfs... Here u can see it
    more clear [L=http://www.kiamotors.cz/[L=home page ... so here is
    my question.....
    Is ther any posibility to make swfs communicate with each
    other on server. Let's say... swf 1 don't start till swf 2,3,4 load
    aswell a.s.o.
    P.S.: sorry for my grammer ...

    You could use ExternalInterface to have javascript act as a
    middleman to communicate things across swf's, but if you don't have
    the ability to change the page code, which seems to be the case,
    then that probably will not owrk as a solution for you.

  • How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

    How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
    PROBLEM
    Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
    BACKGROUND
    My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
    The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
    The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
    The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
    The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
    Repair ID ----------- (Nov 15)
    Repair ID ----------- (Nov 16)
    Repair ID ----------- (Nov 16)
    The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
    On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
    On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
    My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
    The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
    The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
    While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
    Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
    A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
    By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
    Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
    My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
    The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
    Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
    I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
    SOLUTION
    AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
    Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
    DESIRED OUTCOMES
    I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
    Apple covers the cost of the solution because I did not create the problem.
    Apple resolves their internal issue without costing me more time, energy, or money.
    This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
    Does anyone have recommendations for me?
    Thank you!
    <Edited by Host>

    Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
    Perhaps someones knows how to further escalate the issue at Apple?

  • I currently use an iPhone, an iPad, and a Mac computer for business.  The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me.  Currently, this has created a mess of duplicate contacts.  Please researc

    I currently use an iPhone, an iPad, and a Mac computer for business.  The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me.  Currently, this has created a mess of duplicate contacts.  Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates.  There are several applications available that remove duplicates, but I am not sure which ones work or don't work.  I want information on this, but most importantly I want to understand how to fix this problem permanently.  Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates.  I don't have Lion, but I would be willing to get it, if this would fix the problem.

    Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
    Message was edited by: mfduran

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • Both can connect to test sites but not videochat with each other

    I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
    But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
    If we both can videochat with the test sites, how come we cannot videochat with each other?
    Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
    What could be the likely problem?
    On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
    Any help is much appreciated.

    Hi Heng-Yee Yong,
    The test sites are most likely set to have the ports open by UPnP which does not use NAT.
    If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
    I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
    Go to the Network tab.
    Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
    This means your computer will have to take an IP form the Modem.
    This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
    This App can help identify if NAT is a problem
    http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
    Or at least whether you have Consistent NAT or not.
    8:50 PM Wednesday; April 26, 2006

  • BODS / SAP : what set-ups are required for communicating with each other ?

    Hi.
    There is a new SAP system
    And there is a new BODS installation.
    Both on independent server machines but on the same lan network.
    On the test system of BODS. We tried to see how the communication happens with SAP.
    While we try some test jobs by trying to pull a simple table on SAP R/3
    In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
    In the datastore,
    We used the Generate and Execute option,
    with a path on the local directory of BODS server for creating the ABAP program and the dat file.
    However,
    We are always getting error on batch job schedule.
    Although the user is having rights on the R/3 table
    And can login into SAP R/3 system and check the table.
    Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
    For anyone whose login we use. We get the error.
    However, if i directly generate the code on the ABAP flow (without running the job),
    make the program available on R/3 system.
    and then run the job as execute preloaded
    this works fine without any error.
    and we are able to see the data in the target table.
    Now both the systems are new.
    And am not aware of the initial set-ups which are required for communication between SAP / BODS.
    Are WE missing something on the SAP side setups - for generate and execute option to be used?
    Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
    Can anyone share some inputs on this.
    Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option,  it errors out after nearly 10 minutes. Then the error says, login info not correct.
    So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
    If anyone with SAP admin expertise - can help or advise on this.
    Many thanks
    Indu
    Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

    Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
    The first basic task is to get the little ABAP extraction programs loaded and run in R/3.  You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime.  During development, use "Generate and Execute" for your ABAP.
    Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory".  Refer to the documentation (the BODS SAP Supplement) for a description of all this.
    In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server."  For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow.  If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
    If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them.  If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server.  So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
    sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
    sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration.  If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share.  Get it?  Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either.  FTP works similarly -- if you're using that and having trouble, please re-post.
    Best wishes,
    Jeff Prenevost
    Data Services Practice Manager
    itelligence

  • My husband and I each have iphones, how can we share the contact and calender info we have have in our iclouds with each other?

    My husband and I each have an iphone 4S, how can we share the contact and calender info we have in our iclouds with each other?

    You can make one or more calendars of one iphone sharable and the other user will be able to have those sharable calanders synced.  Unfortunately, you can't do that with contacts.  But you could go to the computer account used by you or your husband, perform a backup of the contacts (see the file menu), copy the file to the other account used to sync the other iphone, and restore.  It's a manual process that has to be performed periodically, but doable.
    The other method is for each of you to use the same iCloud ID and have both iphones synced to be identical.  But I don't recommend that otherwise you'll each get the same text messages and who knows what else.

  • How do I enable two wireless clients to communicate with each other?

    I have a WRT54GL with the latest firmware.  I have two computers which are both connected to the router, with IP addresses assigned via DHCP.  Neither has a firewall running.  I cannot get them to communicate with each other -- even ping doesn't work.  I can ping the router itself using the IP address assigned to it on the WAN side by my ISP.   Both computers have no problem reaching the internet through the router.
    What settings on the router will enable the communication to occur?  I can't find anything in the router's user interface which appears to control this. 
    Thanks.
    Solved!
    Go to Solution.

    Hi annie25,
    I think it would be best to check on netgear or belkin technical forums how to make these two talk. 
    Yesterday is history. Tomorrow is mystery. Today is a gift.

Maybe you are looking for