Songs not playing, few second import

hey guys! wandered if someone could help me?
I tried importing songs from a cd (original, just brought) and when i try and import it, only a few seconds of the song gets imported to my library?
If I try and drag the songs to my ipod in itunes a message with: some of the songs in the iTunes music library , inclusing song * were not copied to the ipod, because they cannot be played on the ipod.
Seems strangs since a mate was able to put it on her ipod??
Much thanx

hi nicole!
okay, let's try checking on a few of the usual suspects:
You can't import or play music from an audio CD in iTunes for Windows
... and these resources might help with that:
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
iTunes for Windows: Updating the firmware on your CD or DVD drive
love, b

Similar Messages

  • Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
    play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

  • Ipod shuffle stops playing the song after a few seconds

    My Ipod shuffle stops playing the song after a few seconds, i can skip to the next song but it happens again for every song..
    the thing is its random, sometimes 5secs or 10 secs or at the most a whole minute
    i have updated, restored, reinstalled an all that but i really dont want to send it back as im in afghanistan and would be weeks before i see it again an i use eveyday!! for running.. i thought maybe sweat had got inside it, its not the headphones i have already tried swapping them.
    please help out a soldier in need?

    mine is doing the same thing; I have updated it, and restored the factory settings, and it still isn't working. I use mine for running as well; I think it has something to do with the sweat. Hopefully someone posts with a fix.

  • Random songs NOT PLAYING!

    is this just something iPod gen 4 users have to put up with? is there really no 'fix' out there? we paid too much money to have to be dealing with this...
    i upload songs to my iTunes and they play just fine on there - once they are on my iPod (gen 4) they do not play. the title will show up, it hovers on the title for a while, but never plays and just skips on to the next song. WHY??!!
    i've seen older posts on this, but no one seems to have a solution. who can i talk to??

    I'm having the exact same problem, and I see since your post was in May, apparently no one knows how to correct it. I have a few songs that play fine on my computer, and in iTunes, and even when I have my iPod connected and play from my iPod music list. But when I disconnect my iPod, the songs will not play. It hovers over the song for a few seconds, then skips to the next one.
    Does ANYONE know how to fix this issue? I've been an iPod user for 7 years and love my nano, but I will replace it in a heartbeat if it doesn't work 100%.

  • Upgraded to IOS5, now music doesnt work right, displayed song not playing, plays 3,4 songs then stops although is appears to be playing. Help

    upgraded to IOS5, now music not working right. displayed song not playing, plays 4,5 songs and stops although it appears that it is playing. Cycled pwr,didn't work. tried resyncing, same thing.Help?

    I have an iPhone 4 and ever since I upgraded to iOS5 i've got the same problem. Apple need to release a patch as there's no way of fixing this unless we downgrade our phones back to iOS4 which would just suck!
    I often shut the music app down and start again but even then the artwork doesn't match the song playing and will only play a few songs. It's frustrating when you're driving or going for a run, having to pull over or stop and sort it out.
    We'll have to wait for Apple to bring out a patch unfortunately.

  • My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • Songs not playing in iTunes 7

    Since I downloaded the new iTunes 7, I cannot play any songs in my library, or on disc. I could with the old version. Does anyone know what is different about version 7 which could be creating this problem?

    Its working!!! I did everything in the "frequently asked questions" reply re songs not playing - nothing seemed to work until I restarted my computer. Now its fine.

  • Full protected or purchased songs not playing

    full protected or purchased songs not playing all the way through.

    I have deleted them and re downloaded and they still do not work!!

  • My ipod click skips to random songs after playing 10 seconds of a song

    my ipod click skips to random songs after playing 10 seconds of a song and it won't reset either, can anyone help?
    ipod click   Windows 2000  

    There are three possible causes of skipping music after playing a bit of the song:
    1) the music on your computer is munged
    2) the music was munged as it transferred to your iPod
    3) the iPod is 'confused'
    Listen to a couple songs on your computer - the same ones that are skipping on your iPod. Are they okay? Scratch problem 1 - otherwise you have some reripping to do, assuming you haven't backed them up.
    Next, reset your iPod. If the music is still skipping then the fastest fix is to use your restore/upgrade software to restore the iPod. This will erase the music and re-install the iPod's operating system which will take care of possible problems 2 and 3.
    If the iPod isn't resetting - first make sure you are following the reset instructions for your iPod. There are different methods for different generations. Also, sometimes it is best to reset with the iPod plugged in. Finally, make sure you don't have the hold button set.

  • In my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    in my shuffle 4g the songs not playing properly most of the times it gives some kind of sound and stop playing songs.

    First, make sure the headphones plug is completely pushed into the headphones jack.  Because the jack serves multiple functions, the fit may be tighter than expected (especially if you have the Apple EarPods).
    Also, try using the headphones with another device, to rule out bad headphones.  Or try another set of (known working) headphones with the shuffle.
    Are you using older headphones that have remote control buttons?  Not the latest EarPods and not the immediately previous version of white Apple earbuds.  Or non-Apple headphones with remote control buttons.  It's possible they are not compatible and interfering with the shuffle's operation.  Any standard headphones (with no buttons) should work.
    If that does not help, you can try doing a Restore on the shuffle in iTunes.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, reinstall its software, and set it to defaut settings.  If a software (or settings) problem on the shuffle is the cause, the Restore should fix it.
    Otherwise, if the Restore does not help, it may be a hardware problem.  If it has been less than one year since purchase, it is under warranty.

  • HT203175 songs skip a few seconds at beginning of all songs.

    songs skip a few seconds at beginning of all songs.

    Ristiina,
    I don't think we understand your situation yet.
    When you say "encoding," are you talking about ripping from CD, or about converting the format?
    Are you trying to get AAC files (M4A as you refer to) or MP3 (as you also refer to)?
    In the "few seconds" it is adding, do you hear silence, or is it repeating a section of the song?

  • Songs not playing all the way through.

    When playing songs in iTunes, whether bought in iTunes or not, sometimes the song stops playing with 30 seconds left and goes to the next song.  Why is this happening and how do i fix it?

    SOLVED.
    For a purchased song from iTunes that wont play all the way through, I did this:
    Deleted the file from iTunes, including iCloud (if you have it)
    Went back to trash and removed it to the desktop and re-added it back into iTunes.
    File that did play only 1:23 of 3:00 mins now plays all the way through without skipping ahead/cutting off the rest of the song.
    Synced re-imported song back to iPod and it plays perfectly. Can't believe this hasnt been figured out yet! Or even Apple support suggesting this.
    The hard part is figuring out which songs do this as I only discovered the tracks by random shuffle and thought wth? Why wont it finish playing? Good luck guys. Hope this helps.
    Did you notice if the problem was with imported tracks or purchased only tracks? It seems all mine were purchased tracks from the iTunes store with the extension .m4p

  • Skipping the song after a few seconds on certain tracks

    hi, I have spent hours trying to find something about this and there's nothing anywhere, this is getting really annoying.
    I bought a 2g ipod nano in February and here's my problem. When i play certain songs, the Ipod will stop after a few seconds and jump to the next one. It happens always on the same song, however I can make it work if I manually skip some of the song by holding the forward button, but it still might jump to the next one after a few seconds. Anyway, I missed a good part of the song in the process and I have to do it all the time. This is annoying because on some albums, I miss up to 4 or 5 songs. I don't think that's what you expect after spending $150 on a new toy.
    I noticed it does that on songs that are irregular, with breaks in them. I have restored, reset, erased the songs and replaced them, looked into all the options possible, through the forums and the internet and cant find a good answer. please help me!

    thanks for all the help.
    now, went to play with those options and it doesn't change anything. I even try to set it up so it would skip the first 3 seconds of the song since it's where it stops. To no avail. just stopped at 7 seconds...
    So, it's not the track, it's not the gapless option (on or off doesn't make any difference), it's not the Ipod program (reinstalled it several times). What is it then???

  • Songs skip after few seconds

    Why do some song on my ipod skip after a few seconds?

    For some unknown reason every once and a while a song will not "encode" properly when being converted into digital format (.mp3). This is the cause of the glitches that make the song skip past. This can be fixed by re-encoding the song at a different speed (The standard is 128kbps but can also be done at 160kbps and 192kbps in iTunes).
    Now to re-encoding the glitched songs:
    First off check the original encoding speed. This can be done by selecting the glitched song, right clicking and choosing the "Get Info" option and the bit-rate (encoding speed) will be in the summary tab. After you check the current encoding speed the settings for importing music into iTunes may need to be changed. You can change these by going into the "Edit > Preferences ~ Advanced tab > Importing tab" once here simply change the box labeled "Import Using" from "AAC Encoder" to "MP3 Encoder". Now all that needs to be done is to change the bit-rate. Choose one of the bit-rates from the "Setting" box that is different from the current bit-rate of the skipping song. Once the setting is chosen click "Ok" and then go to the "Advanced" menu and there should be an option to "Convert Selection to MP3". Now it is as simple as selecting the affected song and then going into the advanced menu and choosing the "Convert Selection to MP3" option to fix your glitched tunes! Every song that is converted using this will be encoded with the bit-rate chosen in the earlier stages.
    Hopefully this helps, good luck re-encoding =)
    thebballman

  • Songs not playing on iPod Nano 4G

    I ripped some songs from my CD collection to my Mac and then transferred them to my nano. I can listen to most of my songs on the iPod just fine but about 22 songs out of 600, I get 0:00 and it pauses there for a few seconds and then moves on to the next song. I tried removing those songs and adding them again but it didn't work. Does anyone have a fix for this?

    1. Yes, the songs play fine in iTunes.
    2. The start and stop times were correct as well
    3. MP3
    4. They all came from the same CD's
    5. Yes, the correctly song length is showing
    6. I did remove the song from my iPod. Then I grabbed the songs from my iTunes library and moved them back onto the iPod.
    Those were all pretty good suggestions I didn't think to check but I have now. Any other ideas would be useful. I guess I could restore my iPod because I know I don't have a ton on there and what I do, I have saved in a playlist so I can restore it back pretty easily. I might lose my Nike+ data but I have that online.
    Any other suggestions?

Maybe you are looking for

  • Can't sync contact with my MBP

    Dear All, My MBP is osx 10.6.8 and iPhone4 5.1.1 Last week my iphone can't sync contacts with MBP, it sync with my gmail contacts! I try to reset my iphone and sync again, but it can't work. Only contacts have problem, calender is work fine. Anyone k

  • Internal and external speakers

    so i bought some a set of 2 logitch speakers and a sub... the only spot to really plug it into is the headphone jack... i was wondering if it was possible to set up my sound to come out of the head phone jack and the built in internal speakers iMac G

  • Applying keywords to multiple images

    How do I do this? I can toggle primary only with the keyboard 's', menu or button, but the keywords still only get applied to the primary image, not the selected images. Any ideas?

  • How do I update stocks widget?

    Every time I try to add a stock I get a message saying "failed to validate symbol". I am trying to add well known stocks from a published list such as DJI? Why am I getting that message and how do I update my list?

  • Distribution group editing

    I created three distribution groups for my client. Only the first one I created appears in Outlook? How can a user add more members to the distribution group? Can this be done from Outlook or OWA? I have not found a way. Thanks! Larry McKenzie