Songs stop prematurely in iTunes 10.6.1.7

I've seen this question asked many times as I search the forum but very few answers. After upgrading computers and copying all of my music into iTunes on my new PC, some of my songs (about 40% of them) now stop playing prematurely and go to the next song. I can delete the file and reimport it and it'll play just fine but doing that for 15,000 songs is not really feasible. Is there a way to correct this problem on a large scale? Could it be a corrupt XML file or the like??

philip_jackson wrote:
I have browsed a number of threads on this suggesting converting to AAC, but they seem to apply to old itunes.
I have a number of songs which are ineligble, most seeminlgy becuase of low bit rate. I remember the AAC option from previous versions of itunes but this does not seem to be an option in any of the menus in the latest version. I have "convert to ipod or iphone" adn "convert to apple tv" (both greyed out). The other option is convert to MP3 and this is the only one available. A quick check in the info shows that most files are saved as MPEG 2 - layer 3.
Any thoughts?
Depending on what the import settings are in iTunes Prefs, when you right click (or Control+Click) an ineligible song you'll see "create AAC version" or "create MP3 version" in the contextual menu. Check the import settings by pulling down iTunes > Preferences > General > Import Settings. Set it to Import Using: AAC Encoder, Setting: iTunes Plus. This does not guarantee the track will be "matched," though. It can only increase the likelyhood.
philip_jackson wrote:
Some of the other files that are ineligible are all correct size and correct bit rate but purchased 2007 and before. Possibly with my wifes apple id. Can we do anything about these?
It's possible these are protected AAC files purchased with someone else's iTunes Store ID that is not authorized for use on this computer. If you know the iTunes Store userID/password it may be possible to authorize the computer by pulling down Store > Authorize This Computer and entering the appropriate iTunes Store ID.

Similar Messages

  • After transferring all songs to new MBP, songs stop short in iTunes

    I have a strange situation here. I bought my wife a new MBP 13" recently and started having a problem with song playback in iTunes. I copied all the songs in her iTunes library from her old MacBook to the new MBP. (The new MBP is running Lion 10.7.2, btw). All the artists and songs show up in iTunes on the new Mac. That's good.
    However, on the new MBP in iTunes (v10.5.2), many songs will play and then the audio will stop short of the end of the track. For example, using one song as a test, I picked a track that is 4:19 long. iTunes will play about 4 minutes, then the audio will end abrubtly with about :30 left. This doesn't happen on her old MacBook, running the same version of iTunes, and playing the same track.
    Both versions of iTunes indicate the track duration is 4:19. I've tested the same song on both Macs to confirm this ONLY happens on her new MBP. And when she transferred the test song to her iPod Touch, the song also ends abruptly before its 4:19 length.
    I've now copied her library from her old Mac to the new one a 2nd time, and still get the same issue. Any ideas peeps?

    I'm having this issue also, it's really annoying. I delete and download from "purchases" in the store but then another will pop up.. does it on my phone and shuffles as well as in Itunes. I talked to apple and they gave me a 5 song credit but no way to fix the problem.  Going to have to hit them again.
    I thought I migh have had a virus or a hacker somewhere so I erased my drive(s) and my phone and started from scratch, not even from a back up and re installed everything fresh.. still happening so it's definitly Itunes.

  • Songs stop playing in iTunes (and iPod Touch) early

    I have a few songs where the song will stop playing and move on to the next song in the playlist early.
    The place is different for each song, but it's consistent within the song. For example, I have one song where the song plays fine up until 43 secs before the end, and then it switches to the next song. If I advance the counter to -42 secs, skipping -43, the song finishes fine.
    These were all bought from Apple, they're m4p files.
    Is there anything I can do?

    Do you have the original file on your computer? If it plays in iTunes without ending early, then the resolution is to take the song off of the device and put it back on.
    If the original (on your computer) got corrupted somehow (iTunes 8 appears to muck up files during transfers), then contact the iTunes Store by reporting a problem with a purchase. Perhaps they'll allow you to replace the file -- they did that for me when one of the songs I'd purchased somehow got corrupted. If you have a backup, you could also replace the song from backup.

  • Error -42023, song stopped downloading from itunes

    I bought a movie soundtrack and only the first half of the songs were downloaded. It looks like the rest are fully downloaded because all of their statuses say 6.9 MB of 6.9 MB or 11.2 MB of 11.2MB. Except they all also say "stopped-err = -42023". And whenever I press "Resume Download" nothing really happens and I get a pop-up that says "There were some problems downloading some purchased items". It then suggests to check my internet connection--there is no problem with the internet connection. I did everything the iTunes help told me to do and nothing has worked. I even tried restarting my computer and buying the soundtrack again, but for the second time, the download stopped halfway through.
    help?

    May be this article can be of some help:
    http://support.apple.com/kb/TS3297
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
 ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.

    Windows Vista:
 \Users\username\Music\iTunes\iTunes Media\Downloads\

    Windows 7:
 \Users\username\My Music\iTunes\iTunes Media\Downloads\


    Windows XP:
 \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

  • Some of my songs are stopping prematurely very annoying

    Some of my songs in my itunes library are stopping prematurely on both my computer and ipod.  Anyone know how to fix this probelm it is very annoying

    Push the headphones ALL the way in. The plastic on the headset jack must be flush with the Nano body.
    If this doesn't work do the songs that don't play come from the same album?

  • In iTunes, is there any way to play one song at at time and have the song stop at its end.  I want to play guitar with a track and have that track stop playing rather than going to the next song.

    I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track.  I play guitar with the track and need iTunes to stop at the end of the song.
    I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list.  I would like to find a more straight forward solution that would eliminate this extra step.  On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
    Thanks!

    On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

  • I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

    I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

    a further message  box states that Data Execution Prevention has closed the program.
    Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

  • What is causing, and how do you fix, a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1

    What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
    It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
    I have the latest software so I don't know what to do?
        David V.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

    Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

    Itunes provides the option for setting the Start and Stop times of each music track.  However, the start and stop times do not synchronize to the iPhone.  I don't understand why this option is even available as it doesn't work when listening to music on the phone.  I have not found another application that will support the start and stop time markets.  I have searched quite a bit for this but can't find anything.  I hope we can find something. 

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Songs stop in the middle of play and go on to next song in itunes

    I have recently noticed several songs in my itunes that will start playing normally and then at a certain point in the song it will end and go on to the next song. However, if I scroll the play bar past the point where the song stops, it will finish playing the song just fine. Is there a setting to change, or did my songs just mysteriously become corrupted?? If anyone knows anything please help me. Thanks
      Windows XP  

    Ok, let's start here.
    iTunes for Windows: Songs and other audio don't sound right
    Particularly the part about updating your audio drivers.
    If that doesn't work, I need to know what audio hardware you have (manufacturer / model) and what kind of computer you have (manufacturer / model). I also need to know if the Quicktime Player that comes with iTunes has the same problem when playing back audio files.

  • HT1711 When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    When I am in the iTunes store site and listening to samples of music the songs stop playing after 12 seconds. Does anyone know a way to get it to play the full one and one half minutes?

    I have a similar problem with at least two songs that I know of, one is an iTunes download (encrypted) the other was imported from a CD using iTunes (no encryption). Both songs play 2-3 seconds then immediately go to the next song. The "weird" thing -- I plugged my iPod into my new MacBook which has no songs other than what are on my iPod (i.e., not playing the song from another source) and both songs play fine. Unplug the iPod from the computer, plug in headphones and the songs skip again.
    I've gone through the 5 R's as well, with no luck.

  • Songs (MP3) Just Stops Playing In iTunes.

    Does anyone know why songs (MP3's) just stop playing in iTunes? Album art won't show up and the song was played several times in the past. Is there an answer for this or will it never be resolved? Is this the fault of iTunes or the songs or the user?

    iTunes 8 has gotten really fussy about the MP3 tags. Even if they played in previous versions, they might not play in itunes 8. But they might play in other jukebox porgrams like WMP or WinAmp.
    See if your ID3 tags are correct using MP3 Validator.
    Here is a good web article on it:
    http://trevinchow.com/blog/tag/mp3-tag-validator/

  • Songs stop playing in new iTunes 7.0 load

    I loaded the new version of iTunes and now songs stop playing at random points during playback. Note, the time counter still moves but there is no music until I click on the app or pause/play.

    HELP, THIS IS ****!

  • TS1362 i have downloaded an album off iTunes and some of the songs stop half way they just go silent! should i buy the album again? or what can i do to fix it?

    i have downloaded an album off iTunes and some of the songs stop half way they just go silent! should i buy the album again? or what can i do to fix it?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Maybe you are looking for

  • Printing problem with GR collective slip

    Moderator message: Please do not post the same question in more than one forum. Duplicate rejected. Hi all, When I print GR collecive slip , it is not printing with standard forms iteslf. I m using standard form and print program. It is priting Indiv

  • FCP crashes, and opening and saving projects take too much time

    Since my upgrade to FCP 5.0.4 I’m having trouble on several aspects of FCP. I am using an Xserve raid storage, connected via fiberchannel to an Xserve with 10.4.4. The editing computers are connected via fiberchannel and Xsan to the central storage.

  • How to unlock process template in BPF

    Hi all, Hope all are doing good. I want to unlock a process template in bpf,previously it was locked by someone else. Version bpc10 sp17 Can anyone one help me?? Thanks, kiran.

  • Can't start Appache HTTP server with Weblogic Server 8.1.

    We are trying to use the Appache HTTP server with the Weblogic Server 8.1 on HPUX 11i platform. For this purpose we use Weblogic 8.1 plug-in for Apache 2.0.50 - mod_wl_20.so shared library. When trying to start the Apache server I got the following e

  • Creating ODS in BI 7.0

    Can anyone tell me the procedure to create ODS in BI 7.0 ? Thanks in advance. Srini