Sonnet Tempo SATA E4i does not work??

This stinks!! I have around 500GB worth of data locked on that Partition. Anybody else having problems with this card in 10.5??

For the record... after doing my Leo upgrade, I promptly dragged my 3 SATA drives in to the "do not index" page in the Spotlight prefs, then after waiting well over an hour of letting Spotlight index my boot volume, I issued a Restart. Finder seemed hosed and the machine churned and churned, apparently still trying to complete the indexing. I left it overnight because I was out of steam at 4am. When I woke, it was still spinning, so noticing that the drives had stopped accessing, I did a forced shutdown and then a Safe Boot to force Disk Utility to do its thing. My machine came up fine, and after rebooting normally, I had to drag the SATA drives into the Spotlight ignore pane one more time (they didn't stick because of the hard shutdown I guess), and now all drives are working fine on my system, including the SATAs, which I've done numerous read/write tests on (in Finder). Of note is that a few days ago, before the Leo upgrade, I had updated my Sonnet Tempo E4i firmware to the latest (2.1.2) - not sure wht impact that had, but it couldn't hurt. I'll report back if things go South, but so far, so good on my G5 Quad with the G5 Jive, 3 Maxtor 500GBs, 2 bay internal SATAs, and a bunch of FW drives. I hope you guys get it going also.

Similar Messages

Sonnet Tempo SATA E4i

http://www.sonnettech.com/product/temposatae4i.html
I'd love to hear from some people who have this exact card installed and running in their Quad-core 2.5GHz PowerPC G5. Is it working well? Any problems to report? Are your SATA-300 drive(s) working great thanks to this card? Or what?
TIA

Michael
I think the Sonnet site has firmware updates to
enable PM on your card.
http://www.sonnettech.com/downloads/adapter_sw.html
I might be wrong...
Andrew
Dear Andrew,
The Sonnet E4i was never intended to support port multiplier. That is why it is $100 less expensive than the E4P. The E4P and the E4i both use the same firmware but only the E4P has PM capability. The latest firmware is 2.0 and have it loaded on both cards.
Michael

Sonnet pro express card does not work with lion 7.3.4 warning

After upgrading to Lion 7.3.4 my volumes attached via a Sonnet Express Pro 34 card via SATA no longer mount.
I have the current driver from Sonnet 2.2.8
The volumes appear in Disk Utility, AND pass both the disk verify and repair
However, attempts to mount the volumes result in a message from Disk Utility to attempt repairing the disk

Tried deinstalling and reinstalling the Sonnet driver. Doesn't help.
Really odd that the drives will readly pass Disk Utility's first aid checks and repairs, spin up and down under Disk Utility, but simply won't mount.
Revereted back to 10.7.3 and now back on line.
Hopefully Sonnet will create a fix, but wow, could be Lion 10.7.4's fault given that the underlying drive structure looks sound to Disk Utility (even under 10.7.4). Lion 10.7.4 dislikes something about the Sonnet Tempo Pro Expresscard/34 sata connected drives.

Installing SSD Drive - SATA 3 connection not working

Trying to install a new Samsung EVO 850 SSD Drive. The motherboard is MSI MS-7778 (Jasmine). I can get it to work on the white, dark blue, and light blue SATA connections. The yellow SATA connection (I think labeled SATA 3) does not work. It does not work when I connect it to anything in the computer. I need all four connections. Two hard drives and the DVD reader are already using the white, dark blue, and light blue SATA connections.Does anyone know how to get the yellow SATA connection (SATA 3) to work?Thanks! It's been a long night....

Thanks for the suggestion. I too had noticed the motherboard diagram. I tried and tried all three SATA connections over and over again with no progress. I tried everything I could think of. Changed wires, checked the BIOS, etc.I was just ready to give up when my wife received a call from the Microsoft store notifying her that the install of Windows 10 on her laptop was done. She put the computer tech on the phone, I described the problem and he suggested that I try what I had been contemplating - reinstalling Windows 10 all over again. So I plugged in the SSD drive, both regular hard drives and said to myself, "After this many hours, I've got nothing to lose!" Reinstalled Windows 10 from my USB flash drive and everything worked like a charm. I couldn't believe it!It appears Windows 10 reads your entire hardware configuration on the initial install through the Internet. Which takes forever!Windows 10 doesn't like changes. So those of us who like to upgrade our computers with new SSD drives, memory, etc. are going to have to re-learn how to do it. It used to be so easy! Learning Windows 10 and how it reacts to new hardware configurations certainly sucked up many hours of my time!Thanks for the on-point advice.

KT8 Neo.......Led Activity does not work with SATA drives

Is this another MSI Flop.
Does anybody know if the HD led works when using SATA drives connected to the Via controller on the K8T Neo board?
I checked the case led and it works fine. It is not burnt out.
I also have the K7N2 Delta board and the HD led does not work on that board either when using SATA hard drives. I was told the led connecter was never wired to detect activity for the SATA drives only for IDE. A bios upgrade would never fix it.
I just setup K8T Neo and other than the HD Led not working the board seems to be pretty stable.

The only led activity I get is when the board is first powered on and I just recently noticed when I play a DVD. The led seems to flicker when the dvd is playing.
Other than that I see no led activity with 1 or 2 SATA drives connected to the VIA controller.
Can someone confirm that it either works or it doesn't work.
I keep reading all these posts and some say it works and some say it don't.
Unless their is a new revision of the KT8 Neo and everybody is connecting their led to the HDD Led pins on JFP1 (Page 2-19 in the manual) they all should either work or they all should not workl. From what I gather their is no new revision of the board and only one Bios v1.1.
It also seems their was some confusion on what connector people were connecting thier led to on the motherboard. From what I read on page 2-19 in the manual thier is only one choice on JFP1 (Top row, pins 1 & 3).

MBP 2010 Mavericks SATA PCI Card not working

Hello there,
with Mountain Lion I had no problems with my LaCie SATA II ExpressCard 34, but after installing Mavericks this card is not working anymore.
http://www.lacie.com/de/support/support_manifest.htm?id=10274
I contacted Lacie Support, they do not have an actual driver.
So I bought a Sonnett Tempo SATA Pro 6Gb ExpressCard/34 which should work with Mavericks.
Unfortunately my MBP from 2010 does not. Sonnett offers a workaround http://www.sonnettech.com/support/kb/kb.php?cat=466&expand=_a3_a1_a2&action=b778 #b778
After installing this I could use the card when I plugged it in AFTER systemstart. If the card is plugged in when the computer is started, the compter will not start at all. So, if I like to use an external drive as startvolume with this card, it is useless.
Does anybody have the same problem and any solution?
Will there be an update for Mavericks regarding this problem?
Thanks for Feedback

I can't offer any solutions, my MBP doesn't have an Expresscard slot, but it seems like no one else has answered so I thought I'd offer a suggestion. Contact Other World Computing at Macsales.com. They specialize in Mac hardware and may be able to supply you with a card that works.
As for the "will there be an update" question, we're all just users here so we have no idea what Apple will do.

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

LG GGC-H20L with Sonnet Tempo Sata Pci Card into Powermac G5

Hello dear Community.
I have a LG GGC-H20L HD-DVD/Blu Ray Drive. And a Sonnet Tempo SATA PCI Card.
The Problem is, that the Computer cant find the LG GGC-H20L Drive. The Sonnet Tempo Card it find. Broke i drivers? And where i can get it?
Can one of you Help me?

Nokiman
I made sure there was a good 'thunk' as it slotted in to the PCI slot everytime I installed it, I wiggled it to make sure, I applied reasonable pressure to make sure it was seated correctly, etc. I tried everything, short of using a hammer! Still no joy. I have a PCI firewire card which works perfectly in all slots.
I've sent it back to the supplier for a replacement/upgrade to the Tempo-X 4+4.
Thanks for the tips.
Andrew

Sonnet Tempo Sata E2P driver

I just installed a new Sonnet Tempo SATA E2P card, but for some reason it's not recognizing the driver. I've tried installing the driver several times, and each time it tells me the install is successful. But when I open System profiler, the PCI card shows up just fine, but under "driver installed" it says "No."
I've got a Dual-core 2.3GHz PowerPC G5 running OSX (10.5.7), and it's supposed to be compatible. Any ideas?

What's the first character of the card's serial number? According to Sonnet's website with regard to G5 compatibility: "Only Tempo SATA E2P with serial numbers starting with A or B compatible; Tempo SATA E2P with serial numbers starting with C are not compatible in Power Mac G5."
If that's not the case, are you trying to install drivers from an installation CD or have you downloaded the latest drivers from Sonnet's website?

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

Sonnet Tempo SATA E4i does not work??

Similar Messages

Maybe you are looking for