Sony 46" LCD country of origin

In my internet research, I have not been able to determine where any of the 46 inch Sony Bravia LCD televisions are manufactured.  A local Samsung distributor told me to avoid the XBR6 model, because it is made in China and parts are not available in the U.S.   I'm not sure if this is true, but I would like to know where the various models are made before making my decision.  I was also expecting that some models were still manufactured here in Pittsburgh until the factory closes in February.
Please reply if you can tell me where any of these models of Sony Bravia 46" LCD televisions are manufactured:
V-series
W-series
Z-series
XBR6
Thank you.

So a SAMSUNG employee told you to avoid a SONY (competitor) model and you believed him?
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

  • Very urgent :: country of origin issue to be populated on Goods receipt

    We have multiple vendor PART NUMBERS assigned to 1 vendor i.e N - 1 Relationship,
    if we maintain PIR , which can be used only for 1 vendor to 1 part number we cannot use PIR in this case as it is N - 1 Relation.
    So, the situation is we need to maintain Country of origin for part numbers, which can be seen in Goods receipt.
    By country of origin we should be able to track the inventory in Goods Receipt.
    There is one other option by maintaining a Batch which is the last option, plz do look for the options.
    Please solve this problem with possible solution.
    Appreciate ur help in advance.
    Thanks,
    kalyan

    We have multiple vendor PART NUMBERS assigned to 1 vendor i.e N - 1 Relationship,
    if we maintain PIR , which can be used only for 1 vendor to 1 part number we cannot use PIR in this case as it is N - 1 Relation.
    So, the situation is we need to maintain Country of origin for part numbers, which can be seen in Goods receipt.
    By country of origin we should be able to track the inventory in Goods Receipt.
    There is one other option by maintaining a Batch which is the last option, plz do look for the options.
    Please solve this problem with possible solution.
    Appreciate ur help in advance.
    Thanks,
    kalyan

  • Country of origin issue to be populated on Goods receipt

    We have multiple vendor PART NUMBERS assigned to 1 vendor  i.e N - 1 Relationship,
    if we maintain PIR , which can be used only for 1 vendor to 1 part number we cannot use PIR in this case as it is N - 1 Relation.
    So, the situation is we need to maintain Country of origin for part numbers,  which can be seen in Goods receipt.
    By country of origin we should be able to track the inventory in Goods Receipt.
    There is one other option by maintaining a Batch which is the last option, plz do look for the options.
    Please solve this problem with possible solution.
    Appreciate ur help in advance.
    Thanks,
    kalyan

    Hi Kalyan
    You need to do a bit of reading.
    Check this link:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/47/61017149f011d1894c0000e829fbbd/frameset.htm
    Configuration is available under IMG node for MM->Valuation  & account assignment.
    Go through the IMG documentation also.
    Best regards
    Ramki

  • Macbook Pro connection to Sony Bravia LCD Color TV

    I have a macbook pro and I'm trying to connect it a Sony Bravia LCD Color Television. The macbook detects the sony tv and brings up a dialogue box about it. However, on the tv it says no signal. Anyone have any suggestions as to why this is happening?

    I had the same problem with a 1080i Bravia Sony and a MacBook Pro connected with a DVI-HDMI lead - it turned out to be a very simple solution - you have to make sure you are looking at the right AV channel on the TV. The mapping of AV1-6 to the ports on the back is not obvious at all (in this case it was AV4 that was the correct AV port). The Bravia also has the option to skip AV channels if desired - so if in the preferences you have disabled ports then you need to make them available to skip through.
    The picture is very sharp indeed with a DVI-HDMI lead - far far superior to a vanilla SVGA cable. Sound is automatically selected from an analogue input (2xphono) on one of the HDMI ports so make sure you select the right one on the back.
    (p.s. just to emphasize - the DVI-HDMI does not map to the 'PC' port it is another AV channel)
    Message was edited by: David meme

  • I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India. Once i am back to India, will my iMac be covered by the Apple's Protection Plan?

    I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
    I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
    Waiting for response from the support group members...

    Thanks Ralph
    This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say?

  • Country of origin from Inforecord to batch record at GR time

    Hi Folks,
    We have a material which is purchased from 2 different vendors in different countries. The material is batch managed and a specific batch will only ever be purchased from 1 country. Some customers will only accept the material if sourced from 1 of the 2 countries. I have maintained the country of origin in the inforecord for each vendor. What I need to happen is that at the time of goods receipt of a new batch, the country of origin is passed to the batch record but this is not happening. The vendor is being pulled in, but not the CoO. The receipt is processed by an interface and not manually so it cannot be added manually at GR time.
    Do I need to use a user exit in the batch creation process to populate this field in the batch record (if so, any idea which one would be suitable), or is there another way of configuring it to populate automatically from the inforecord?
    Cheers
    Keith

    Hi,
    To fulfill your requirement please use the user exit. Possible two user exits are EXIT_SAPLV01Z_013 (enhancement SAPLV1ZN in trs SMOD) and EXIT_SAPMM07M_003 (enhancement MBCFC003). The user exit EXIT_SAPLV01Z_013 is best option. Thanking you.

  • Customs Duties based on Country of Origin in the PO

    Hello,
    I would like to seek your help on pricing conditions in the PO.
    We have created an access sequence for customs duty condition type ZOB1, and we used the key combination delivering country, commodity code, and the country of origin. We cannot maintain the country of origin in the material master because it is only known upon PO creation. The condition type ZOB1 is supposed to read the country of origin in the PO. Instead, the country of origin in the material master is what's being populated in KOMP-HERKL, which is the field catalog we used as part of the access sequence/condition table.
    We would like the system to get the customs duties based on the country of origin entered in the PO and not the one in the material master.
    Is this possible? Has any of you tried to modify the values in the structure KOMP before PO prices are determined by the system based on the access sequence?
    Any inputs will be greatly appreciated.
    Thanks!

    Hi Lakshmipathi,
    So far we are encountering 2 incorrect deliveries in production. This does not involve Sales order but Purchase Order. I tried to check the country of the Supplying Plant and the country is not the country reflected in the delivery. It is expected that the country of the supplying plant must reflect in the delivery. Checking the PO, it is not also getting the correct country but it is getting the country of the receiving plant. We got confused why it is getting the country of the receiving plant.
    Thanks,
    Rish

  • HT1918 I can't get into my account in iTunes using my ID and password -the session times out after trying to Review and I choose United States as country of origin-- have tried six times and same thong happens.  Just want to verify if/which card is being

    I can't find out if there is a credit card already attached to my apple ID and password.  Every time I go into iTunes, as apple instructs me to do, I can't get into "Review", as it "times out" right after choosing the "united States" for the country of origin.  Every time.  All seven times now.  I received this phone as a gift from my wife and she can't remember if there was a credit card put on file, but thinks there was, since she's pretty sure they wouldn't let her set up the apple account for the new phone without it.  You would think that this should be easy to find with my ID and password and security info and all, but after almost an hour, we are at our wit's end!!   Please help!!!  THANK YOU!!!

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • Country of origin field?

    Dear Gurus,
    can we make only 'country of origin' field manadatory in me11 and me12?
    if yes, how?
    If No, why?
    pls help........

    Dear
    Field Ctry Of Origin gets copied from Vendor Master - In Address LFA1-LAND1. Further it is independent of the Partner Function. Even u assign any different Goods Supplier/ Ordering Address in partner determination, it will not not pick-up from its country.
    Hopes this help you.
    Cheers
    Sunil

  • How to track the Country of origin using the tcode 'MIGO_GR'

    Hi Group,
    I was trying to run  the tcode 'MIGO_GR' and want to see the field value Country of Origin(HERKR) in the display batch tcode 'MSC3N', but I am not able to see this value.
    the thing is that, the data comes as Idoc with the batch number, and in this batch there was no info about the country of origin (HERKR) and hence when I check in MSC3N, I could not see the value for Country of origin.
    Could you please let me know the enhancement to be used to populate this value(HERKR) into the Batch that gets created (thru tcode 'MIGO_GR')? and also please let me know the table that gets updated?
    thanks for your help in advance.
    Regards,
    Vishnu.

    Hi Group,
    I resolved the issue myself and the solution is as under:
    When we run the transaction 'MIGO" or "MIGO_GR", internally the system generates a Batch, which can be changed by the User at his interest to any number he likes.
    And when this Batch gets created, we can have a Userexit (EXIT_SAPMM07M_003) called to update the Country of Origin (HERKL) as under:
    if XXXX - Condtion here....
       Populate the field HERKL in the structure BATCH_MASTER_DATA with the desired value
    endif.
    This will resolve the issue and we can view this Country of Origin in the transaction MSC3N.
    Regards,
    Vishnu.

  • Country of origin is not printing in Export Commercial Invoice for US

    Dear Abapers,
    I am using the standard form to print  export commercial invoice. I am using the output type   FUCI.  In that country of Origin and country of final destination is not printing in the form. The structure V55ENAFT has the field URSPR_HEADER for Country of origin and  BESTI for Country of destination.  What I have to do get populate the values for those fields.
    Thanks & regards,
    Jagadeesh T.

    hi,
    You may try creating /updating equipment data without entering the country of origin. Since this field in asset master might have been disabled, system will not allow to save data.
    James Prabaharan

  • Multiple Country of Origin at a Material Master level- Foreign Trade import

    Hi Gurus,
    We have a requirement to store Multiple Country of origin at a Material Master level . One Part/Material is sourced from different vendors and they are manufactured in different countries . Please note that we are not using Batch Management . Is there any workaround to have this scenario without using standard Batch Management .
    Thanks,
    Prabuddha

    hi,
    you can use split valuation for this by using the valuation category field in material master in accounting 1 view.
    in this you have to maintain valuation category as "H" = ORIGIN.
    For split valution procedure you have to reffer the  follow this link.
    http://www.sap-img.com/mm025.htm
    THANKING YOU

  • How to connect hdmi cable on hp g60 to sony bravia lcd?

    how to connect hdmi cable on hp g60 to sony bravia lcd?

    Hello sohagshahin,
    It appears that your HDMI port is not working on the notebook. I will try to assist with this.
    Have you verified that the port indeed does not work by trying other tv's or monitors? (try one of each if possible).
    Have you tried other HDMI cables?
    This document may also help you: Resolving HDMI Display and Sound Issues (Windows 7 and Vista).
    Let me know how things go.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • A white patch has appeared on my Sony Bravia LCD TV.

    A white patch has appeared on my Sony Bravia LCD TV. The patch is slowly growing in size and obstructing the picture. Unable to see what is under the patch. Does this forum also involve customer care?  We bought the TV almost 3 years back. Not sure if the international warranty that I got still exists. Need to check. Appreciate help. Cheers!

    I am having the same issue. My LCD's model is KLV-32BX300. I bought that TV 4 years back. The TV was working fine before that issue. The amazing thing is that the patch was initially a small spot and it size got increased within 2 days even the TV was powered off. Please help...

  • Country of Origin based on Storage Location

    Hi all,
    i would like to understand if the country of origin in the delivery document at the line item level (EIPO_HERKL) to default based on the storage location. even if the COO is available in the material master.
    we had tried using user exits but were not successful in updating the same for a domestic delivery.
    Regards
    ilango

    it is the storage location used by a plant at India belongs to
        a different country which is closer to india.
    Sorry for misunderstanding but still the case is even worse.  You should be aware storage location is always assigned to a  delivering plant and you have to take the help of ABAPer by implementing a suitable exit to achieve this peculiar requirement.
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • The underline is in the middle of the links in my spry accordion

    I created a spry accordion menu in Dreamweaver CS4, and when I test it the underline is in the middle of the links in my spry accordion. This is not happening when I test it in a browser on the Mac I'm working on, but when I test it on a PC my rollov

  • RIP or Repair?

    Dear all, i purchased blindly from ebay like new looking, but "not working" 24´´ iMac C2D, 2,33 CTO, late 2006 and i need to decide wheather to repair or not. I´m money limited DIY guy not beeing affraid :-) After arrival of the iMac i realised it ha

  • When can I get an iPhone 4!?!

    Anyone know when we'll be able to purchase an iPhone 4 (32 gig) in Canada? I've asked my local retailer and Telus, both said at least 3-5 weeks (this was a couple weeks ago) and I've visited a number of retailers in BC and Alberta with no luck. Also,

  • I have Kindle books on iPad that I didn't download from Amazon.  How can I get these books on my Mac Pro Kindle app

    I have Kindle books on iPad that I didn't download from Amazon.  They are also on iCloud.  How can I get these books onto Mac Pro Kindle app?

  • Do apple charge?

    I have a problem with my iPhone 5 (White 16GB) and there's no sound, the sound comes back only if I squeeze on the part next to the home button (bottom right side) and the sound comes back only for a short period of time. It's getting annoying, only