Sony Audio Dock problem

When playing music using my iphone 4 in my Sony Audio Dock the sound switches from the Dock speakers back to the iphone. It doesn't work at all with either of the docking trays provided so I'm not using a docking tray in the cradle. It's difficult to keep a good connection with the Dock. Any suggestions?

contact Sony support : http://esupport.sony.com/
and let them know your problems...

Similar Messages

Stereo Audio Record problem (While recording video as well)

Hi,
I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
Any solution?
Thanks.

@uliwooly This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4 then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp. Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not the typical "sony" thing to carry on.

AUDIO SYNCH PROBLEMS

I have never had an audio synch problem 'til now. I am running 10.5.7 on a 2.8 GHz Intel Core 2 Duo 4 GB ram, 24" imac.
iMovie 6.0.4
I have a 50 minute heavily edited project with many transitions, etc.. I have no problem with the footage downloaded from my Sony HD camcorder. I even saved many individual frames as pictures and changed them to the beat of the music in the timeline and all worked perfectly. BUT, my problem is with the "video trailers" I slipped into the timeline. The audio slips when I play back in the timeline AND when burned to DVD. BUT, it does not slip in the same place every time I preview it. If I scrub the playhead back over some of the bad scenes and play them again, they are in synch. IT KEEPS CHANGING..... When I export to a desktop movie to review - the synch problem is there and some of the audio is missing. This only happens on "movie trailers" I have downloaded.
I can't figure out why it keeps changing in the timeline and then correcting itself when I back up and play it over again. I AM GOING CRAZY........
Thanks in advance for any suggestions.
Wally

Thanks for the reply but my problem is not with iDVD - it is with iMovie - when I add "trailers" to it they go in and out of synch at different places everytime I review it before moving on. When I scrub back over the problem area and then play again, they are perfect for one time and then I try again and they are not synched. The problem is in iMovie.
Thanks,
Wally

Audio Sync problem iTunes Festival

Audio Sync problem when watching iTunes Festival on Apple TV3. Other video's work fine. Anyone else experiencing the same? Any solutions?

Hi There,
The same problem is happening with me as well. I keep getting the "analysing audio" message and my clips are 24 or 25 frames out of sync.
I am currently working on a mixed format project - DVCAM and HDV capture into a DVCAM sequence. The DVCAM clips are causing the problem. The HDV clips are fine. I wondered whether it might be a mixed format issue - switching between capture codecs within the same project? Is that something either of you guys are doing? What camera was the footage recorded on. The pictures I'm struggling with were recorded on an Ikegami and I'm capturing from a sony deck.
I have found an easy workaround. Put your entire out of sync clip into the timeline. Correct the sync then drag it back to your bin. You'll get two clips with the same name which is a tad confusing but the one you've dragged back will at least be in sync.
I remember having this problem years ago without explanation. It hasn't then happened for years until now.....
I'd be interested to know if you get to the bottom of it.
Good luck,
Richard

X100 e connecting to Samsung audio dock via bluetooth Windows 7

Hallo,
I want to connect my x100e via Bluetooth to my Samsung audio dock.
- Bluetooth is working
- laptop found audio device via Bluetooth
- the device is working according to the control panel hardware and devices
So far so good. But when I try to use the audio device the sounds still comes via the laptop speakers.
Control panel - Hardware and Sound - manage audio devices doesn't show the Samsung dock but only the speakers
Is there anybody who can help me to fix this problem?

Hi,
As Rick said, this would be caused by hardware and software compatibility, you should check this following articles, try to update
the device driver for a test:
Error: "Bluetooth peripheral device driver not found" when you try to connect a bluetooth device
http://support.microsoft.com/kb/2654568/en-us
Update a driver for hardware that isn't working properly
http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt-working-properly#update-driver-hardware-isnt-working-properly=windows-vista
Alex Zhao
TechNet Community Support

EMU 1820M audio dock not reconized

Hi all
I just purchase an EMU 1820 M with a new computer (3200+ AMD)
I install the PCI card and the daugther card, update the drivers to the 1.6 and install all the sofwares.
But the Audio dock is not reconized and active even if all the lights are working on the dock !
some one have any idea coz i m starting to dont know what to do anymore .
Please send tell for any idea
Take care all

Hyabuza,
Are all of the lights lit up on the AudioDock M when you connect it? If so try these steps:
1) Disable hibernate mode on the system, sometimes this can cause problems
2) Right click on patchmix and select "Restore Defaults"
3) Flip the EDI cable (change the sides plugged in)
4) Try using a different power lead connected to the 1010 card inside, and if possible eliminate the need for the molex converter cable by using the power lead in your system designed for a floppy drive.
If none of these steps help, then you will need to contact EMU support. Their support contact page can be found on their website, www.emu.com.
Jeremy

Itunes wont launch due to audio configuration problem

Itunes won't launch saying there is a audio configuation problem, this started all the sudden no new software added no updates, no configuration changes. I've tried uninstalling and reinstalling without improvement and all other audio programs work fine. any ideas?

This is usually a Quicktime problem, see this article:
http://docs.info.apple.com/article.html?artnum=304424

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

24" iMac Airport & Dock Problem

I received my 24" iMac 2 days ago: beautiful machine! I am having trouble with various things, though, and I don't know if these are problems with hardware, software or both. I don't want to spend a lot of time installing programs and getting the computer set up if it is defective and will need to be replaced.
First of all, the computer will connect with my 1st generation AirPort Base Station manually, but it won't reconnect automatically after sleep or restart. I have 3 Apple laptops and a G5 iMac that work fine with this Airport, so I think this is a problem with my new machine.
The computer was dodgy from the start, possibly due to poor performance of my wireless mouse. I was convinced that the data I'd transferred from an old machine was causing my problems, so I erased the HD and reinstalled the system and base software, then did a software update to get everything up to date. I also reset the PRAM and repaired permissions (does that ever really help?). That is when I discovered the mouse issue so I'm not sure if the early problems I had were all due to the mouse's inconsistent performance.
I connected to the wireless network with the initial setup of the machine after I reinstalled the system. Since then I've successfully connected through the Airport icon menu as well as Internet Connect and the troubleshooter program, but the connection lasts only until the next sleep or shutdown. I have to type in the name of the network and the password each time.
I'm running a closed network. I've entered the Airport ID to the Airport base station and as I said, it will connect manually without problems. The Network is set to join preferred networks by default and my network "Home Wireless" is the only preferred network that shows up in the list.
Next, the dock intermittently won't show up when I drag the cursor to the bottom of the screen. It displays all the time if I unclick the "Automatically hide and show the Dock" button, but I like the dock hidden when I'm not using it. This behavior is different from any of my 6 other Macs. I have plugged in a USB mouse and the dock seems to be working more reliably with it, though there have been some episodes of the dock not appearing even when I'm using the USB mouse when the wireless mouse is also connected. Could the wireless mouse be causing this problem with the dock?
The wireless mighty mouse's performance IS very spotty. Pushing the scroll button won't reliably call up the Dashboard, and the side buttons seem to either activate the Expose function too easily or not at all. In fact, there have been times when each of the buttons haven't worked properly.
Thanks for any advice. I'm hoping that replacing the wireless mouse will fix the mouse and dock problem and that the airport issue will be a software problem that will be fixed soon. I've read several others' posts relating to networking problems with the current generation if intel macs. I don't think that these are all operator dependent.

I unclicked "create a closed network" and now
everything seems to work on wake from sleep and on
restart. Is that the same as broadcasting the SSID?
Yes
If anyone else is following in my footsteps, I also
changed the security from 40 to 128 bit WEP at the
same time because if WEP is a useless scheme as I've
read, I want it to be the best darn useless scheme
it can!
Though 128bit WEP can be hacked, it takes a lot more traffic to find the key then using 40bit WEP.
Thanks iFelix. Any idea how much chance there is for
someone hacking my WEP in a residential neighborhood?
Depends on who your neighbours are...
To be honest if you lived in an apartment block I would argue you were more at risk than if you live in a detached property with only a couple of neighbours.
Should I update my wireless system? I'm happy with
the performance of the AirPort otherwise,
If you're happy and it's working, keep it as it is.
but I'm
disappointed that they don't allow an upgrade to a
more secure system and also VERY disappointed that I
can't at least create a working closed network with
my new Apple iMac.
The thing is putting your Airport base station in a brown paper bag adds as much security as creating a closed network does.
A wireless network is still broadcasting and therefore detectable regardless of whether you broadcast the SSID (closed network) or not.
A determined hacker (one who can hack 128bit WEP) will not be put off by a closed network.
As for casual users, well the 128bit WEP will stop them.
Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
WPA is your friend if you value wireless security, but that will only be possible if you upgrade your wireless router.
It could be for a variety of reasons why your Mac and original Airport don't like working with a closed network, however it does seem to happen more often when using hardware from different manufacturers.
The reason why your previous Mac didn't have this issue is that it used a different wireless chipset to your new Mac, which is the main reason for the issue you are having now.
iFelix

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Sony Audio Dock problem

Similar Messages

Maybe you are looking for