Sony Bloggie Live - Facebook uploading.

I am attempting to log into Facebook with my Sony Bloggie Live. After inputting my Facebook login information a Pop-Up appears that says "Please close this window and return to the application".
While I am able to hit the close button when I have the Bloggie connected to my computer using PlayMemories, there is no close button when uploading using just the Bloggie.
How do I resolve this problem?
Thank You in advance to whoever can help.

Hi Elizabeth,
Welcome to Sony Community!
Make sure that you’ve registered your access point with the Camera. Try turning OFF and ON the Camera. Also, try to share videos using different sharing sites and check if it works.
Thank you for your post.

Similar Messages

Flash in Sony Bloggie Touch?

Hello.
I got a Sony Bloggie Touch as a present. Is it me or does its digital camera not have a flash for dark shots?
Thank you in advance.

Hello Ant and welcome to the Users Discussion Forum.
The Sony Bloggie Touch doesn't have a built-in flash or light to assist dark shots. However our newer line up, the the Bloggie Live and Bloggie Sport have a built-in LED video light so you can shoot in total darkness.Thanks. I guess it can't be used as a real camera then.

Sony Bloggie -- How to trim video

I generally use my Sony Bloggie to shoot concerts. My question is in regards to trimming videos, so I can extract one song out of a set and post onto YouTube. When I hit the Trim button on one of my segments, the screen goes into "One Moment Please" for an inordinately amount of time and doesn't do anything. How long is this supposed to stay there until the new video is produced? Am I doing something wrong? An answer would be much appreciated.

Hello and welcome to the forums.
Often, a video clip you have taken may be longer than you want or some sharing services such as YouTube, Flickr, or Facebook, has a file size or play length requirement.
Currently, YouTube limits a video clip to a maximum file size of 2GB or 15 minutes. With all Flickr accounts (free and premium), a video clip is limited to 150 MB in size or 90 seconds in length. Facebook video file size and play length limits are dynamically determined based on a users’ profile based on a host of criteria.
Bloggie Software allows you to trim the beginning and ending portions of a video clip.
To trim a video:
*first select the video clip.
On the right hand side in the Voice area, a “Trim Video” option appears.
*Click on “Trim Video”.
*The Trim video tool will appear.
You can adjust the beginning and the ending of the video by adjusting the marker on the left to where you would like the video clip to begin, and the marker on the right to where the video clip will end. When you are happy with the video clip, you can trim the video.
*select the “Trim” button.
The trimmed video will then be displayed as well as a copy of the video will be created and appear in the Bloggie Software “Everything” view. To return back to your Library of photos and videos, select the “Close” button.
If your computer is hanging and will not complete the trimming process please ensure any resident security programs are not preventing the Bloggie software from completing the task.

FaceBook Upload Feature uploads video as a photo still

Hi all.
Maybe this has already been widely discussed, but I've only recently upgraded to the latest iPhoto with the direct FaceBook upload button/feature.
When I try to *upload a video clip shot* with my iPhone from my album/events, it *ended up as a photo still* on my FB page. Is this a bug or a restriction?
Thanks and cheers

Dragging the video directly to the Desktop has the same effect.
Correct. That's why I said
Select the video in the iPhoto Window and go File -> Export *Kind: Original* and export to the desktop.
When you import a video iPhoto grabs the first frame as a preview and this goes into the Modified folder inside the Library. So, if you drag it to the desktop that's what you get - this preview. You need to export it.
Regards
TD

IPhoto '09 Facebook upload problem

I have been uploading photos using iPhoto '09 to my Facebook account for years. Just a couple of days ago I started receiving a message box "Do you want to set up iPhoto to publish to Facebook?" when I click on the Facebook icon. If I go ahead with the button "Setup" it opens another small box that is simply my Facebook page. So, it is logged in but the page is useless as I cannot configure anything with respect to iPhoto. I have logged out and tried setup again but that does not work. I also went as far as to download the Facebook uploader plugin that works via the Export function. This partially works but my photos are not viewable by my friends even though it says they should be. Does anyone know why the Facebook upload function stopped working all of a sudden and how to fix it? I am using iPhoto '09 version 8.1.2 (424). Thanks.

Thanks Larry. I found the discussion your were referrring to and it worked! I will paste it below in case someone else needs it.
Just solved it here after an hour+ of experimenting.
Try this:
• When you get prompted "Do you want to set up iPhoto of post to Facebook?" confirm and it will bring up your regular Facebook home page in a small viewer window.
• Go up to the upper right corner of the Facebook page and log out, then hit the "Close" button at the bottom of the small viewer window.
• You'll probably get the same "Do you want to set up iPhoto to publish to Facebook?" prompt again. This time hit Cancel
• Now try to share your pictures to Facebook again. You'll get the "Do you want to set up iPhoto to publish to Facebook?" message again. Do it and this time hopefully you should get a prompt to login to your Facebook account. Enter your Facebook name and password. This should reset your connection.
• If successful you should get a prompt from Facebook that you can close the page. Close it and fingers crossed, all should work again. That's what worked for me.
Good luck.

Wristband plastic clip holder for Sony Ericsson Live View Android Watch broken

i have recently brought a new Sony Ericsson Live View Android Watch and the wristband which holds a plastic frame in it which holds watch got broken some how....so now i need another plastic ....what should i do about it????????????

Contact your local Sony
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Sony Bloggie touch camera download to Ipad

Can anyone tell me if and how I can download videos and photos from my Sony Bloggie touch camera directly to my Ipad? I have tried doing it using the USB camera adapter kit and I get a message on the Ipad saying "Cannot use device. The connected USB device requires too much power".

I am using the camera connection kit USB adapter. Can't use the card reader because the camera doesn't have an sd card only internal memory. I have a gut feeling that the camera is trying to charge through the USB port (which is where it charges from) but the Ipad is showing that message because maybe something isn't set right on the camera. Thanks for the help though. Any further thoughts/ideas would be appreciated.

Problem with PS Elements 11 facebook uploader

The facebook uploader doesn't work for me. Uploading in high resolution won't work at all, the uploader does not recognise albums in facebook, and worst of all: uploades images won't be visible to friends, unless they dive into yout profile. What am i doïng wrong (PRE11)
While uploading al settings are correct, but in facebook settings become different.
Operating system: W7
Browser: IE 9

Welcome to the forum.
Unfortunately, you have posted to the Forum Comments Forum, which is for discussion of the Adobe Forums, themselves.
I will Move your post to the PrE Forum, where you will get quick assistance.
Your links and any e-mail subscriptions should follow along just fine.
Good luck,
Hunt

Problem with SD card and Sony Bloggie MHS-CM5

I have just bought a Sony Bloggie model MHS-CM5 and a SanDisk SDHC (number 4) 4gb card. For some reason when I turn it on, it was saying "error formatting sd card" or something very similar. I did some research and saw a problem somewhat similar, tried connecting to my computer, taking the battery out and back in, formatting card from camera options, and now it is saying there is no space on the memory card when it is brand new. I am fairly good with these things and I am stumped. Any help is greatly appreciated!

A SDHC type 4 4GB card should work fine with your bloggie, so try the card in another device and try another card in your bloggie to establish which is having the issue. If you find that the bloggie is having issues with several different cards it may need service. Give Sony support a call and they will be happy to help:
http://esupport.sony.com/US/perl/suppor ... mdl=MHSCM5

IPhoto 09 facebook uploader application generic error

when I hit the facebook uploader button on the bottom of the screen the pop down that says "do you want to set up iphoto to publish to facebook?" appears and I click the "setup" button and a second popup appears with a login page, I input my facebook email/username and my password and hit login...
then it loads a page that reads, "An error may have occurred as part of the login process. You can close this window and try returning to the application, though it may ask you to login again. This is likely due to a bug in the application."
I've tried repairing my keychain, blocking and then unblocking the app via facebook, nuking various plist files. I haven't found a solution and haven't seen mention of a similar problem on the web. HELP!

Sounds like a temporary FaceBook issue to me with several totally new reports popping up all at once - try again later - or in the morning
LN

Facebook upload problem

I was uploading photos yesterday to Facebook and they all seemed to upload. Today I still have the upload icon and the status is Facebook upload 19 or 23 and 0%. Any suggestions on how to get rid of this?

Hi lnasc81! I have a suggestion for that icon issue you've described. Try a simple soft reset on your Incredible. While the phone is on, remove the battery from the back. Keep the battery off for 30 seconds, and then re-attach it and turn the device on.

IPhoto + Facebook uploader

Has anyone seen/solved this problem? When I try to upload photos using the Facebook uploader, it uploads one photo and then stops uploading the rest of the photos, saying "An unknown error has occurred."
Is something wrong with my photos? My iPhoto? Facebook?
None of my other friends have this problem. I redownloaded the facebook uploader to see if I can fix it with that, but it's still there.
This is iPhoto '08 version 7.1.3 (364)

Michael
Welcome to the Apple *User Forums*
Have you Looked Here?
Google is your friend
cannot find any reference to an official acknowledgement or fix.
This is a user only forum and nothing here is official - it is only users helping users
LN

Moving Master Images after Facebook Upload

I'm using a fully updated version of Aperture 3 and ran into a problem today moving master images that I have not experienced before. My normal workflow is to batch import images from my camera every few days in one large import, so I often have multiple subjects in every batch. For my 9 months with the program I have always downloaded everything into a temporary holding project I literally call "Hold". When I get the time to do a detailed review, I then delete what I don't want and move (drag) the master images I want to keep from "Hold" into other subject-matter-unique projects across the library. This works for me and has worked flawlessly until today when I downloaded about 20 images. What I did differently today was I took things out of my usual order and decided to quickly upload 3 of the images from the "Hold" folder to Facebook using the Aperture Uploader. The upload went fine, as it has in the past, but the problem surfaced when I then tried to move all the master images out of "Hold" to my permanent library file (project) structure. The 17 images (which were not uploaded to Facebook) moved out to their new projects just fine, as always, but the 3 masters which were the source for the Facebook upload will not allow themselves to be moved out of "Hold". When I drag them to the intended project, Aperture copies them into that project, but the original stays in "Hold." Of course, if I try to then delete what is in "Hold" (with a copy safely filed away elsewhere in the Library) I get the warning that I am attempting to delete a master upon which other versions are dependent (to include "Facebook albums" it says), and all will be deleted.
My take on this is the Facebook upload from "Hold", and the resulting versions created in the Facebook album (far bottom entries on the Library listing), now make "Hold" a permanent home for those associated master images. Is there some way to get around this and actually move the master images to where I want them to be AND to de-clutter the "Hold" folder? Or does this mean any use of Aperture's very handy (at least to date) Facebook uploader permanently glues a master to whatever project it was in when it was uploaded, never to fully and completely move again? Thanks.

I just made a test of this, and can confirm the apparent behavior. However, I examined the Masters folder in the Package of the Library (and I have a Managed Library) and I believe there may be some referencing between Projects taking place. The same appears to result where you have created a slideshow. In the Facebook album and in the Slideshow album, the file info reports the master file name -- in my case the xxxx.NEF file, which clearly none of them really are, but rather some version.
I will try to do a more precise test where I can measure the size of the Masters folder to see if the "Move" adds to its size by an amount equal to the size of the Master file.
Interesting!
Ernie
Message was edited by: Ernie Stamper

Aperture Facebook Uploader: Both Master and Version

I've searched the forums and see that others had this problem fixed with 3.1.1; but I'm running 3.1.2 and if I edit, crop and otherwise enhance and make a new version and make that version the stack pick, the uploader insists on uploading both (or multiple) master and versions to Facebook. I have to de-stack the images and delete from facebook, and this then reflects in my project/album.
What the heck? I should be able to upload one version. And if I choose to delete and unstack, why does it reflect in the master database?

I don't think Facebook is retaining all the Metadata from images uploaded by any means. However, it's definitely retaining the Version Name - And this is what serves as the caption for the photo in the photo album on Facebook.
Since updating Aperture to 3.1.1, I no longer get the entire 'stack' or multiple versions of the image uploaded. So the software update for Aperture HAS fixed this issue.
However, I have now noticed another issue since starting to use the Aperture uploader. I have about 10 albums/galleries on Facebook. All of these were created prior to the Aperture 3.0 release with the integrated Facebook uploader.
Now when I upload an image and subsequently Aperture accesses my Facebook photo albums, it begins to sync these photos and albums. The Facebook directory that you can see at the bottom of the Library now lists those albums that exist on Facebook and begins to sync those photos. However, when I browse photos by 'date' all those Facebook photos from those albums appear in my Library with the date listed as the date I first viewed them.
So if I click on one of the Facebook albums in Aperture, let Aperture go through its sync process, then review library "photos" and sort by date, all the Facebook photos I have looked at appear as the most current photos.
this is not a good thing because I have Albums, Projects etc. that are sync'd with iPhone or Apple TV that include date filters (projects in last month, photos last week etc.) Now all these legacy Facebook photos are appearing on these other devices.

How do i install a live facebook feed into my muse website?

How do i install a live facebook feed into my muse websiteby embedding facebook developer activity feed code?

Not sure what the APP id is and in the domain I was putting my site domain name.
There are 2 sets of code one being the Javascript SDK
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "//connect.facebook.net/en_GB/sdk.js#xfbml=1&version=v2.0";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
the other
<div class="fb-activity" data-site="janemorrison.ca" data-action="likes, recommends" data-colorscheme="light" data-header="true"></div>
I have tried to object insert html for the 1st code
then right click and paste for the later. only t o get no thumbnail generated.
Also in this manner how does it recognize the fb page you want it to actively feed??
confused
I resolved it for a client by using an i frame but I would rather have the direct code. So would love to resolve this! Thanks for your patience

Sony Bloggie Live - Facebook uploading.

Similar Messages

Maybe you are looking for