Sony Bravia as Preview Monitor

Hi,
I have just bought a Sony Bravia (KDLS26A12U) and I'm hoping to use it as as second digital monitor to preview my DVDs. I have a PowerMac G5, so I thought about connecting the Sony Bravia to the DVI port (using a DVI to HDMI adapter) and my regular monitor to the ADC port (using an ADC to VGA adapter).
Has anyone done it yet? Can you tell me if it works? I'm having some trouble on configuring the Mac to run on Sony's default resolution...
Thanks a lot!

Hey tmarques
this particular model supports only 480i, 480p, 720p and 1080i correct?
if this is true, you will have refresh rate problems watching standard definition material, since you are in a PAL country.
also, the native resolution fro this LCD is 1366x768, so you migh thave some trouble displaying this back.
if you go under this resolution, your images will seem stretched, over and they will be squashed.
why dont you try lowering your resolutoin via system preferences on the sony monitor and see if that works?
Mikey M.

Similar Messages

How do connect my sony bravia tv as a monitor screen for mac pro

How do I connect my Sony Bravia tv as a monitor for my MacBook Pro? I have an hdmi lead with an adapter to the computer and get a picture of factory setting cosmos with some of the folders of my desktop going off the side of the tv screen.

If you have the right cable, and have set the right input on your Sony, then you need to adjust one thing. Go to System Preferences>Displays>Set Mirroring. I think you've got it set to Extended desktop, which means the Sony is just a HUGE extension of your Mac OSX desktop.
That should fix your issue.

External Monitor Not Supported Issue (Sony Bravia)

Lenovo Community
I have been tryign to connect my Lenovo T400 to a Sony Bravia (KDL-32S300 LCD Digital Color Flat Screen) and unable to use the "Projector Only" (to watch recorded movie) video output setting. I am given a non-supported error. Yet I can use either the "Duplicate" or "Extended" video output setting just fine. The Sony Bravia even works fine with a more recent Lenovo T520. I also connect my Lenovo T400 to an older Smsung SyncMaster 930B as an external monitor and that works fine in the rojector" mode too. Can't figure this one out.
Jeff

Are you using the latest available drivers?
Do you have an HD3470 switchable or just the integrated GMA4500?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Sony Bravia as Monitor

I recently hooked up my laptop to our 32" Sony Bravia TV with an HDMI cable and used it as a second monitor with FCP. My HD footage looked great, and having the real estate for my timeline was fantastic.
I'm in the market for a big monitor, and the Bravia is quite a bit cheaper than the Apple 30" display. Is there any reason I shouldn't consider buying a Bravia as a dedicated monitor rather than the Apple? Is there anything else I should consider?
Thanks!

The central concept is - computer monitors don't display video very well. They operate in a different color space, scan rate, etc - and so only show you a limited proxy of your images. Material viewed only on computer controlled screens won't really show you if you have problems - or will exhibit weird attributes that go away when displayed on their native devices. The issue is more than "should we tweek the red of the man's sweater to bring it into limits"?
I can appreciate hiring a colorist to grade the material, But, how can you know if you even have useable material for the rough cut without viewing it on something calibrated to a defined standard?
In any case, good luck with your project.
x

HD preview monitor hookup?

So if any of you followed my last question you'll know that I recently made the leap to HD and am now trying to sort everything out!
My question deals with an HD preview monitor. Right now I simply have the "Video Playback" settings set to Apple FireWire NTSC (720/480) which goes via FireWire to a miniDV deck, and then from there out (via RCA cable) to a 4:3 TV (preview monitor). This works great for me.
Now, I will want to have a similar set up for an HD preview monitor. I'm sure this is possible, but according some earlier topics that I searched in this forum it doesn't appear to be as easy as one might think.
Bottom line: can anyone recommend the proper equipment and signal flow? I just purchased a 32" Sony Bravia HD TV to use as the preview monitor and I figure I'll need a Blackmagic DeckLink type of card, but I'm at a loss from there.
Thanks very much!!
Eric P

There is no way to view HD via firewire, unless you shoot DVCPRO HD. Every other format requires a capture card.
Decklink Intensity Pro...or any of their line. Towers only
Matrox MXO2 Mini - Works with a laptop (must have Express34 slot) and MacPro towers.
AJA Kona line. More expensive, and tower only.
AJA IOHD or IO Express. Laptop or Tower.
Depends on budget. But for HDMI to an HDTV, the best bang for the buck is the Matrox MXO2 mini or the Decklink Intensity Pro.
The directions for both are included with both. Basically MACHINE>CARD>HDMI>TV.
Shane

How to connect with sony bravia.

Hi,
I'm trying to connect my Mac pro with my Sony Bravia LCD TV. I bought a MiniDP to VGA cable and I already had a VGA extension to connect with my TV. I used to use that cable to connect my other laptop and worked ok with frequent "no synchronisation". Once I connected all, nothing happened. I restarted the PC but nothing happened. I tried to play around with all connection, but nothing happened. I do use windows XP in my mac pro as well and it didnt work their either although my other PC working fine with same VGA cable. I'm not very sure my MiniDP to VGA cable is working or not? Is there anyway I can check its working. Also, someone (sorry forgot the name) in the forum said, HDMI works better then VGA. What do I have to do to connect my PC through HDMI. Is there any direct cable to connect MiniDP and HDMI? Thanks for your help.

The best way to test if the VGA adapter is bad or not is to try it with another display, preferably a computer monitor instead of a TV. If it doesn't work with a monitor, then that's stronger evidence the adapter is bad.
There are MiniDP to HDMI adapters. Here's an example of one. I believe this company will ship internationally. You might be able to find UK sources for similar adapters.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5311&seq=1&format=2

Connecting my macbook pro 13" to Sony bravia via mini Displayport to HDMI

Hi,
yesterday I bought a new LCD TV Sony Bravia KDL-32EX600 (Full-HD LED) that has 4 x HDMI inputs.
I also bought a mini Displayport to HDMI and HDMI to HDMI cable.
When I connect it to my computer, the screen goes blue for a second and it doesn't recognise any additional displays. There's also no video or sound in the TV, on the right HDMI channel. (I've tried every HDMI input and every channel)
I've tested the TV with another laptop that has straight HDMI output from the gfx card and it works perfectly.
I have up-to-date MacOS and I also upgraded my TV's firmware to the latest.
I thought that maybe the miniDisplayport to HDMI connector is broken but why does the computer try to do something when I turn on the correct channel on the TV?
I'm out of ideas..

Hi madhenry,
I know it's a month on from your post, but I thought I'd add that I'm having exactly the same problem. I'm trying to connect my new MacBook Pro (15" core i7) to my Sony Bravia KDL-40EX600 using a mini displayport to HDMI adapter. When I plug the cable in, the MBP screen goes blue for one second then goes back to normal, but the system just doesn't detect the external display.
I've tried the MBP on other monitors and it works fine, so there is nothing wrong with the adapter or cable.
I've also tried plugging two other Macs into the TV (a 2008 15" MacBook Pro and a 2008 MacBook) and the TV works great with both of them.
So, it seems there's something specific to the new MacBook Pros that makes them incompatible with the Sony EX600 TVs.
I just talked to AppleCare about it and after trying a few things (resetting the PRAM, etc.) I was simply told that there's nothing wrong at all with the Mac and that this is simply a "compatibility" issue that I have to put up with. So, it looks like we're out of luck until (hopefully) a new Mac OS update fixes the issue.
Peter

Connect Macbook to Sony Bravia HDTV via HDMI?

I am trying to connect my Macbook to a Sony Bravia HDTV via HDMI, but are unable to get one to recognize the other. I am not sure what the problem is.
I have the following set up:
- Macbook 13" (2.16 GHz Intel Core 2, 10.4.11)
- Apple Mini DVI to DVI adopter
- 15' DVI to HDMI cable (from monoprice.com, same cable recommended elsewhere in these forums)
- Sony Bravia KDL46W3000, (Full HD 1920 x 1080 p)
The Sony tv does not seem to recognise the Mac is connected (and/or vise versa). The screen is just black. Yes, I have tried all 3 of the HDMI inputs on it, Yes, I have set the tv input setting to match the corresponding input jack. HDMI does work on the tv though, as I have a DVD player connected via HDMI and that works fine.
The Mac Display preference pane does not detect the tv/monitor being connected. I normally use another external LCD monitor with the Macbook via mini DVI to VGA adaptor without any problem. I have tried various solutions others have mentioned for similar problems I found in these forms, such as turning the tv off then on, rebooting the Macbook before connecting, etc. and every other combination.
An hour on the phone with Sony tech support did not get me anywhere closer other than they say the Mac should recognize the tv as an external monitor.
Has anyone with a very similar configuration managed to get this to work? Please note, I am well aware that many many people use HDTV's as a external monitor, but this is a Sony Bravia, not a LG, or Samsung, or anything else. Also, it is a Macbook, not a Powerbook or anything else. Also, I am trying to connect via HDMI, and not VGA.
Any tips or success stories would be appreciated.
Thanks

I hooked my Sony .Bravia 40" up to my MacBook with no problem. From your description, it sounds like you may also have a bad DVI->HDMI cable. I'm using the stock Apple miniDVI adaptor mated to my DVI->HDMI cable.
I was going to go the route you took and use the VGA port on my Bravia, but thought it might limit me to "side" letterboxes since I thought VGA basically stood for 640x480 or 4X3 format. I'm surprised that you get 1920x1080 from a VGA cable. While your picture may be great, by definition I understand high to low video quality in order is...
HDMI/DVI, Component, s-video, VGA, and lastly, A/V cables.
My DVI->HDMI cable is a cheapie that I think I bought at Frys. This type of cable is probably getting harder to find as most stuff is straight HDMI now. Anyone thinking of getting a new flat screen should strongly remember to get one with at least 3 HDMI ports unless they are into cable switch-a-roo when connecting various devices. The stock devices today are cable/satellite, Blu-Ray/HD-DVD/DVD and one for the old Mac.

Macbook to Sony Bravia HDMI

Help.
I have a cable and adaptor to connect my macbook to my sony bravia tv.
On the TV I get the purpley sunrise picture and if I drag the macbook screen image to the right it appears on the tv (like it is on the next page), but obvioulsly the two are not synching and I have no sound. Help

Sirmausalot wrote:
Use system preferences to configure your monitors properly. It sounds like you want 'mirroring' and not dual display
mirroring on a macbook will only get you 720p. If you want 1080, then you will have to run in "clamshell" mode where you plug in the display, a mouse, & keyboard, close the lid, & then wake it up with the kb or mouse.

Black Macbook out to Sony Bravia Question

So I just bought a new Sony Bravia 22" LCD TV. I'm excited to use the TV as a monitor for my computer, or at least so that I can play back Hulu or other such videos on the TV. The TV supports VGA in as a "PC" input as well as 2 HDMI ports. I know I need to get an adapter for the mini DVI port on my Macbook, however I'm not sure whether to go the route of mini DVI to VGA or mini DVI to DVI with a DVI-HDMI cable to the computer. I know in both cases I will need a separate audio cable so that's not the issue. The TV says that it has a native 720p resolution. I think the highest VGA resolution supported by the TV is 1360x768, but the HDMI is higher I think. Thanks for your help

I also have a black macbook and I recently purchased a 42" Sony Bravia TV and I have a few questions...
So I think I need 3 things:
- the mini DVI to VGA cable
- the VGA to VGA cable (that will connect to my TV right? how long of a cable is useful?)
- another cable for the audio...
What do I need to get for the audio portion? Someone told me to get a 3.5mm AV RCA Cable with the red/white that connect to the ports on my TV and then the headphone jack on my laptop.
Advice? Thanks!

MacBook 13-inch Aluminum (Late 2008) to Sony Bravia KDL-40W5800

Hello forum,
I am looking to buy a Sony Bravia KDL-40W5800 (Sony link, Amazon link) in the near future. I am going to be using it to play PS3, watch television and DVDs/Blu-Rays, but also I would like to be able to connect my MacBook to it if I wish to. I have been reading the forum and have come across numerous users that have problems connecting their MacBook to their HD-TVs.
So my questions are:
What adapter cables do I need to connect the two devices (I already own the Mini DisplayPort to VGA adapter, if that's any help) correctly?
Is the Sony Bravia KDL-40W5800 compatible with the MacBook and does anyone have any experience with the TV itself? If so, I would be grateful for any kind of feedback.
Thank you in advance,
XtremeFluX

Hi,
I have been using my macbook (late 2008 2.4 ghz) with my Sony Bravia (KDL 26S2030) for about a year now. I use Mini Display port to VGA and then into my PC input. I am perfectly happy with the picture quality (although you may want to fiddle with you custom settings) and I have never had any issues.
When I was looking originally I came across tons of people who had problems with connecting the Macbook to their monitors. However there was a patch that came out (maybe last march) and so I bought my equipment after that and the mac always connects properly (although be sure to turn your TV on before to put the mini display port in). You will need to calibrate it and that will be that.
I hope that helps a bit.

Macbook Pro to Sony Bravia NOT WORKING...PLEASE HELP

Hi,
I am trying to connect my *macbook pro* to my *Sony Bravia TV*.
So far I have the macbook pro - mini display to VGA converter - VGA cable - PC VGA socket in the back of the TV.
When selected on PC mode, the mac display turns blue for about 3 seconds then returns to its original state whilst the TV has a black screen with 'NO SYNC' in the top left hand corner.
The VGA cable is brand new and the mini display converter works as i used it on an old TFT monitor which died...hence why i am trying to connect it to my TV : )
Any tips/solutions would be amazing!
Thanks
Jon

Had the same problem with my 40" Sony Bravia LCD. I tried for ages to connect MiniDisplay to VGA. The TV would never recognise an input signal and the MacBook wouldn't acknowledge any change and I eventually gave up.
Recently, I checked the Bravia manual and the highest possible resolution for my model was 1360x768. So I set the MacBook display to one of the nearest: 1280x800. I connected the cord and then closed the MacBook lid for a few seconds and reopened it. The signal kicked in! The mac then gave me the option to reset the VGA to optimal display - I used the table at the back of the Bravia manual to reset it to the highest display compatible with the available mac options (1280x768, 60Hz). Now it works perfectly, but still only when first set to 1280x800, nothing less or more!

Macbook Pro to Sony Bravia connection

Hi,
I would like to connect my Macbook Pro to my Sony Bravia KDL-32V2000 but I'm not sure what input connection i need on the TV and what cable i need?
There is a HDMI input but that is being used with the cable box. Will the PC input connection work?
Thanks,
Carl

... I can use the PC port situated close by. However, is this likely to reduce the quality?
What are you going to be viewing? Just programs on the Mac? Or DVD movies?
Due to the size and "excitement" factor, you might want to try that option out first. It is also your least expensive option! Use the litrtle white video adapter that came with your MBP, and get a cable from it to the PC INPUT of the monitor.
... Secondly, can I get a dual HDMI adaptor and have both cables connected ...
And that's your more expensive option: a HDMI-male - to HDMI-male cable, and an "A-B HDMI Switchbox."
The profit/markup on HDMI cables can be enormous. For example, at a large retailer here in the U.S., I find a 6-foot HDMI cable for US$69.95. The same cable is on eBay for forty dollars less. Just purchase from reputable dealers, and check the feedback. There ARE differences in quality and workmanship with these cables, so please don;t just go for price alone.
A switchbox? I would go to the HDTV online magazines and read reviews. Or contact your local HDTV dealer for support. This might be the time to establish or re-establish your relationship with a local dealer, where pricing might not be rock-bottom, but advice, and the ability to return products without hassle is worthwhile.
HAPPY NEW YEAR!!!

Connecting MacBook to Sony Bravia via DVI-HDMI!

Hi I am having major issues with my Macbook connecting to my Sony Bravia KDL-32V4000 I now have 2 different DVI-HDMI leads as well as the Apple Mini-DVI-DVI and still have absolutely no luck.
The Macbook is picking up the Television absolutely no bother at all but there is just nothing at all coming up on the Television its self it doesn't even recognise that I have the computer in the HDMI slot nothing at all just blank!
Any help would be greatly appreciated as it will save me buying more and more cables if this fails to work will have to go with the DVI-VGA I guess would rather fix this though!
Thanks!

I bought a mini-DVI to HDMI and an HDMI to HDMI cable. Once I went into settings for the display, I found that the TV was acting as a second monitor and that it was off to the right of the macbooks own screen. Thus if i moved the mouse to the right it could control the second monitor. You are able to move the screens so that they have the same data on each or use them as two screen with different info on each. Each screen is clearly visible in Spaces and it works a treat.
It is also possible to use the TV as the only screen. The way to do this is to connect up and close the lid on the mac. Once the light on the front starts blinking you can wake it up by using your mighty mouse or external keyboard. once awake, assuming you have chosen the correct HDMI connection from the TV the TV will act as the only monitor at full resolution.
The problem I have, is that I have not been able to get the sound to work. I have used the earphone socket and connected that to external speakers as I cannot seem to get the analogue signal on the TV on anything but an AV channel (not an HDMI channel). Thus the sound works on one channel and the image on another. My TV is a Sony KDL40w5710 - thus if anyone know the solution to getting the sound running through an HDMI channel on my TV it would be appreciated if you could contribute.
Cheers

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

Sony Bravia as Preview Monitor

Similar Messages

Maybe you are looking for