Sony Bravia R56C - PS3 not working via HDMI MHL

Hello All, I have purchased Sony Bravia R56C and PS3 last week. This Sony Bravia television has two HDMI inputs. One at the back called HDMI/ARC and the one at the side called HDMI/MHL. PS3 works with the back one i.e., ARC. But it does not work with the side one i.e., MHL. 
I am completely clueless. I went to show room and
1. We have hooked up my PS3 against another Sony Bravia TV of the same model via the HDMI/MHLport. It did not work.
2. We have hooked up my PS3 against Sony Bravia R482B [ a different model ] via the HDMI/MHL port and it worked fine.
The MHL port works with my laptop. But not with PS3. I have no idea what to do currently. If you have any inputs, please do share with me here.
I guess we all could assume that this is a problem/bug with the TV and I also have the TV software up to date. I have to say that I am utterly disappointed. If anyone else is purchasing this TV, please make a note of this problem. This is not funny to end up with. 

Hello pawanwalker17, 
We have not heard from you for a while. If you are still encountering the issue, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region  http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks!

Similar Messages

  • HT4366 my sony bravia HDTV is not a smart tv.  I want to add an apple tv to my cable box and HDTV.  I understand to connect the HDM1 cable from the TV to the back of the apple tv devise but what cables do I use to reconnect back tho the comcast cable box?

    My Sony Bravia HDTV is not a smart TV.  How do I setup connection between the Apple TV, Comcast HD box and the Sony.  I believe the HDM1 cable goes from the Sony to the back of the Apple TV, but what cables connect the Sony back to the Comcast box?

    Welcome to the Apple community.
    The HDMI cable goes from the Apple TV to the TV.

  • Sony W810i - Charging pins not working

    Hi,
    My charging pins on Sony W810i mobile is not working? I could not charge my phone anymore, Can some sugeest me resolution for that?
    Regards,
    Shiv Malav

    Try cleaning them but failing that, send it in for repair.
    Edit: Have you tried charging it via USB cable on the PC, or using another wall charger?

  • Multi-Row insert/update/delete not working via db-link

    App. Version: 2.0.0.00.49
    DB: Oracle 9i, not sure about the build
    Problem: Multirow Update/Insert/Delete doesn't work via db-link.
    Error received: ....ORA-1460: unimplemented or unreasonable conversion requested....
    Where: Tabular Form generated via Wizard
    Side note: It's working properly when local table(s) is/are used, it's not working via db-link or view.
    I've encountered this error with single update/insert/delete operations before, but was able to fix it via using temp-variables (v_xyz := :Px_xyz; as the proposed v('Px_xyz') was really slow with my scripts)...but with the automated DML-action I don't see a way to edit it accordingly.
    Workaround found:
    1a) Use local* collection on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
    1b) Use local* table on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
    * Local = on the same server that HTML-DB is running on...
    So,...to my questions:
    1. Can someone confirm that this is a "known feature" (aka bug)?
    2. Can someone tell me if this "known feature" has been eliminated in the newer version of HTML-DB/APEX (> 2.0.0.00.49)?
    Thanks.
    Ingo

    Hi,
    Do you have a small test case program that demonstrates this? A JDeveloper project showing what exactly is the problem when trying to use the BDB SQL JDBC driver to insert data into the BDB SQL database? What do you mean by "not working", do you get any errors, you do not get errors but you do not see the data in the database etc?
    What are the versions of Java, JDeveloper, ADF and BDB SQL you are using, and on what OS?
    Regards,
    Andrei

  • Bravia Sync does not work with Sony Bravia XBR-55X900B and BDV-N8100W Bluray 3D Home Theatre System.

    Bravia Sync does not function with my Sony Bravia XBR-55X900B and Sony BDV-N8100W Bluray 3D Home Theatre System.  The Sony Bravia XBR-55X900B does not list the Sony BDV-N8100W on the Bravia Sync device list.  Does anyone have an explanation or solution for this?

    Please use a component cable.  With either RCA or optical for audio.  That is the quickest fix.  For current HDMI issues. 
    1.7 upgrade has been known to fix most of the HDMI issues.  Verizon is working diligently to roll out img 1.7.
    Javier
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

  • Macbook Pro Retina not working with HDMI

    I have a Mac Book Pro Retina that will not work using the HDMI port. I have tried with two Monitors and difference cable and the issue happens on both. I connected one via a Display Port to VGA and it works fine.
    I'd like to use the HDMI port. I am running Mountain Lion 10.8.4 (Latest Version).
    I have tried deleting the pref panes as outlined in ofther links. Aslo reset pram without sucess.
    Is anyone using a Macbook Pro Retina with builtin HDMI port sucessfully with 10.8.4?
    If you are using HDMI with Display port let me know if I should get an adpater to test.

    Hi walkerheather,
    It sounds like you've already done most of the pertinent steps here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    I would recommend going through once and trying anything you may have missed in the section "No video or no signal, image distortion, 'snow,' or flickering" and then follow these steps from the very bottom:
    If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Take care,
    - Ari

  • HDMI sound. Pavilion DV6. Windows 7. TV sound was working via HDMI. Now switched off?

    I connected the pavilion dv6 to the tv with an HDMI cable. Sound and vision were working on the tv after setting the TV to HDMI.
    My Grandson discovered that their was no sound from the computer and, unknown to me, changed something to get sound from the computer speakers which stopped sound from the tv.
    How do I get sound back to the tv via HDMI. How do you switch from computer to tv sound and back ? can you have both at once ?
    malcolm

    Hi Malcolm,
    Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, Nvidia or Intel.
    Next, connect your notebook via HDMI to your Tv.  Right click the speaker icon in the Taskbar and select Playback Devices.  Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sony Bravia 2006 will not recognize AppleTV

    I cannot seem to successfully connect my Apple TV to my Sony Bravia KDL40S2000. I've followed all the suggestions I can find online:
    I have connected the AppleTV to the Sony Bravia with multiple HDMI cables.
    The HDMI port is active, and works with other devices (there is only one)
    The Apple TV is connected directly to the TV.
    The Apple TV works fine on other TV's
    I know which video channel to look for.
    There is no sound or video.
    The resolution on the Apple TV is set to auto. I have tried them all.
    I have contacted Sony, they simple gave me the user manual, very unhelpful.
    When connected there is simply no signal.  Does anyone have an idea how to fix this?
    Thank!

    Since it is working on other TV's the issue would reside with the Sony display. Best to persist with them.

  • Hooking up iMac to Sony Bravia with a Mini DisplayPort to HDMI Adapter

    Hey everyone,
    I have a Mid 2011 iMac running on Lion. My tv is a 40" Sony Bravia KDL-40S4100.
    I am trying to hook my iMac up to my Sony tv using a Mini Displayport adapter. The tv shows up under the display settings when I plug it in, but the tv screen remains black.
    Anyone know what I might be doing wrong?
    Thanks

    It has one called PC.
    TV
    Input 1
    Input 2
    Component 1
    Component 2
    HDMI 1
    HDMI 2
    HDMI 3
    PC

  • (Pulse)Audio? not working (Intel HDMI)

    Hi,
    so I installed Arch Linux again and have problems with the sound. I think there is a problem with PulseAudio, as test sounds from settings (cinnamon) and using 'aplay -D plughw:0,7 /usr/share/sounds/alsa/Front_Center.wav' work. But when I open music/videos in VLC, Firefox or Clementine, there is no sound, nor are system sounds output.
    I tried using headphones and everything works just fine.
    I've been searching for a while now and found nothing that could help me. I can't figure out, what's wrong.
    Previously I used an AMD graphics card and had no problems with sound and HDMI. Also I can't remember doing something special when I installed and used Arch back then. Now I use the HD3000 graphics included in my Intel Core i7-2600k. I need HDMI because I use an A/V-receiver.
    Thank you in advance

    There is already a default sink set under ~/.config/pulse, content: "alsa_output.pci-0000_00_1b.0.hdmi-surround-extra1". Don't know what to do with that. I thought it was set by pavucontrol and should be right?
    speaker-test -c 2 -t wav -D plug:dmix:"{CARD 0 DEV 7}"
    works (while pulseaudio is killed, right!?) in multiple instances, fuser gives
    $ fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/pcmC0D7p: iuno 3431 F...m speaker-test
    iuno 3486 F...m speaker-test
    iuno 3491 F...m speaker-test
    /dev/snd/timer: iuno 3431 f.... speaker-test
    iuno 3486 f.... speaker-test
    iuno 3491 f.... speaker-test
    I see no problem there?
    I don't really know what you mean with the linked post. But I think a summary might be useful, as I really messed up writing in this thread.
    When pulseaudio is killed:
    Like mentioned above, speaker-test works with C0D7
    VLC with Preferences - Audio - Output module set to 'Alsa audio output', Device set to 'HDA Intel PCH, HDMI 0 Audio Output' works
    Clementine with GStreamer Audio Engine - Output plugin set to 'Audio sink (ALSA)' does not work
    While trying with ALSA-only I found this out:
    $ fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: iuno 652 F.... firefox
    iuno 4167 F.... vlc
    iuno 4259 F.... clementine
    /dev/snd/pcmC0D0p: iuno 652 F...m firefox
    iuno 4259 F...m clementine
    /dev/snd/pcmC0D7p: iuno 4167 F...m vlc
    /dev/snd/timer: iuno 652 f.... firefox
    iuno 4259 f.... clementine
    Concluding Clementine and Firefox use the wrong device. I guess c0d0 may be the default device for alsa? But for pulseaudio it shouldn't matter, right?
    Choosing 'HDA Intel PCH, ALC893 Analog Output' as device in VLC results in no sound, obviously, and 'C0D0' in fuser.
    However, trying to play back compressed audio with VLC, alsa-only, everything like above does not work. fuser shows the same (C0D7), vlc shows no error playing back .m4a or .mp3 files but it stays quiet.
    .oga (vorbis) files I found in /usr/share/sounds/freedesktop do work, though. While VLC is playing, I can't run speaker-test (error: -16,Device or resource busy)
    When PulseAudio comes in , some things change, obviously
    I'd like to name two states. State 1 meanns sound is working, state 2 means sound is not working. State 1 is default.
    First of all, no matter what I do, fuser always gives
    $ fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: iuno 5552 F.... pulseaudio
    /dev/snd/pcmC0D7p: iuno 5552 F...m pulseaudio
    Forcing VLC to use 'Alsa audio output'-module, and 'HDA Intel PCH, HDMI 0 Audio Output' as device results in device or resource busy error.
    Setting device to 'PulseAudio Sound Server' or 'Default ALSA Output (currently PulseAudio Sound Server)' both work. The 'Module' setting in preferences does not matter. I could either choose ALSA or Pulse with the same effect*. Long story short, audio output works, still not with compressed audio files. This means the state switches to state 2, as long as I keep the .wav file running! -> clementine and firefox also could play back sound, vlc can now also play back compressed audio - as long as I keep at least one of them running. When all sound output is paused, I fall back to state 1. Only playing back a .wav file in VLC or (p)aplay could save me back to state 2. I have to start other apps immediately, when in state 1 as pausing playback instantly causes a fallback to state 1. Opening pavucontrol, while in state 2 keeps me in state 2 as long as pavucontrol stays open. I used this as a dirty workaround for the last days.
    State changes are also blocked the other way round. While in state 1, trying to play sound from clementine or opening pavucontrol results as staying in state 1, also when I play a .wav file with vlc.
    Sorry that was much text, but I hope it's clearer now
    *correction: This setting needs a restart of vlc to take effect. When the 'Module' is set to ALSA, pavucontrol lists 'ALSA plug-in [vlc]: ALSA Playback', when set to pulseaudio, the entry is called 'VLC media player: audio stream'. Same for clementine, when I change from ALSA to pulseaudio in the settings. Firefox always uses ALSA. However, it does not have effect on the state-thing. I still need to enter state 2 with the methods mentioned above
    Last edited by iuno (2014-08-11 11:20:44)

  • Local Printer not working via Remote Link

    I have a problem with my remote desktop printing to my local printer.  I connect via RD on Windows 7 Home to Windows 7 Pro.  I have installed an HP Laserjet Pro CM1415fn printer.  All prints fine locally.  Also everything printed fine
    but have had to have a recent update to my Remote PC that I log into.  So the printer had to be reinstalled.
    All worked ok for about 6 print jobs then stopped working.  Nothing has changed.  I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode.  I have tried restarting the Printer Spooler in Services
    and rebooting the remote PC but no joy.
    Any ideas please.

    Hi,
    You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
    Take a try with the printer troubleshooter:
    Open the Printer troubleshooter
    Also see if the below thread could help:
    Local Printing with
    Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
    Best regards
    Michael Shao
    TechNet Community Support

  • I chat does not work via netgear router

    hi there, i have installed a netgear w-lan router in my office, now my i chat account does not work any longer, as well as my colleagues have the same problem. bonjour list is ok but we cannot connect to AIM account. i am using the router via airport or ethernt, makes no difference. any ideas?

    I don't recognise that as Netgear ID.
    Having said that I searched and found it
    http://www.netgear.com/Products/RoutersandGateways/RangeMaxNEXTWirelessRoutersan dGateways/WNDR3300.aspx
    Have you turned Off the DOS or SPi item in the WAN Page and Also Allowed Responses to Pings on the WAN Port ?
    8:14 PM Tuesday; July 1, 2008

  • VOIP does not work via E4200 router

    I have a new Polycom Soundpoint IP550 VOIP phone that was not connecting via my old WRT54GS router.  I purchased a new router, the E4200, thinking it was just the age of my original router.  It also will not allow the VOIP traffic through.  I can connect the VOIP phone directly to my CenturyLink modem and it works.  But when I connect it back to the router it stops.  
    I contacted Cisco support and they had me upgrade the firmware to 1.0.02 build 13  May 24, 2011 version.  Also adjusted down the MTU to 1364. That still did not work so they told me to take the router back to the store.  I have not done that yet as I want to ensure that the router is really broken and not that I am missing a setting.  The tech said that I should be able to plug the VOIP phone into the router and make NO additional changes.
    Anyone have any ideas of what I am doing wrong?  Thanks.

    192.168.1.1--->Administration---> and change SIP ALG to enabled. 
    I don't work for Cisco. I'm just here to help.

  • Sony PRS-300 ereader not working with Lion

    Hello
    I updated to OS Lion on 20 July and now find that my ereader (Sony PRS-300) is not recognised by my Mac when I plug in the USB.
    It worked perfectly before!
    Am unable to locate any help on the Sony site and the problem only occirred after installing Lion.
    Anyone have any ideas to solve it?
    Yours in hope
    K

    Sony reader not working after updating to Lion OS.?
    How do I get my sony reader to work on lion os ?
    Fix now avalible for UK
    http://support.sony-europe.com/computing/prs/prs.aspx?site=odw_en_GB&m=PRS-650
    Just pick model then os download
    USA fix.  http://esupport.sony.com/US/perl/select-system.pl?model_type_group_id=6
    pick model number from left then click  DRIVERS AND DOWNLOADS...... Enjoy
    Angus Cooney

  • Printer not working via usb connection to airport time capsule

    I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
    devices:
    printer: canon i-sensys MF4350d
    air port time capsule 3 TB
    macbook pro me664
    osx mountain lion 10.8.5 (latest version)
    printer software:canon UFR II ver 2.43(latest version for my printer)

    Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

Maybe you are looking for