Sony Camera no longer recognised after Mac OS 10.4 upgrade

I use Final Cut Pro HD 4.5 and just upgraded to Tiger.
When I start up FCP I get a message I have no camera connected.
But checking the System Profiler I can see the Sony DCR-TRV33 on the Firewire bus.
I also checked iMovie, and there's no problem there. It shows Camera connected.
Do I have to update FCP? (I haven't found an update) or should I do something else? or did i make a mistake uograding to Tiger?

What you are describing is often caused by a dorked install of Quicktime as FCP uses QuickTime to do its capturing.
You might try reinstalling it (don't leave out any steps). Go to /Library/Receipts. Trash all QuickTime related .pkg files (Don't worry, you're only deleting receipts). Go to www.quicktime.com and download the latest installer and run it. Reboot.
Post back,
Patrick

Similar Messages

  • Camera no longer works after 6.0.1

    My camera no longer works after an update to 6.0.1 on iPhone 5. It now will make the noise and animation, but the camera app freezes and won't take the picture. Any luck for anyone else?
    EDIT: Scratch that, turning my phone off and then back on seems to have fixed the issue.
    Message was edited by: Pichu0102DM

    The same powers-that-be fixed the problem for me. It's even more mysterious, since I know I did not restart the computer. I was just surfing along, laboriously using the browser's navigation buttons, when out of habit I pressed the button on the mouse and it worked. It's been working ever since.
    Since I notice that 23 other people have this problem (so far), there's clearly something that needs looking at even if the problem somehow corrects itself.

  • Bluetooth module no longer recognised in Mac Pro

    My Mac Pro's been doing some strange things recently.
    A couple of days ago I noticed things were running very slowly, just moving windows about they would jerk and jitter.
    Tried hardware test, disk utility etc but no problems found. I then unplugged the machine and plugged it back in - problem solved.
    Now today I started up the machine, go to login to my account and my keyboard and mouse don't work. They become initialised if I unplug and plug them back in, or if I wait about a minute they start working.
    Along with this, my bluetooth module is no longer recognised under Mac OS X, although when I reboot my machine into Vista the module is recognised and functions correctly.
    It also takes over minute to shut the machine down, which it has never done before. When turning it off the OS seems to quit quickly, but the screen remains black for a long time before the power is cut the the drive etc. (This is especially noticeable when restarting the machine as it takes more than twice what it has done in the past).
    Is this all just coincidence that these things happened at the same time, or are they related?

    Have you tried the standard debugging steps listed in the troubleshooting guides here and elsewhere?
    You might try looking at http://www.thexlab.com and other websites like that for information about how to debug various problems.
    If you are OK with opening your case, you can also reset the SMC controller on your motherboard, which can affect at least some of the subsystems you are having trouble with.
    But first, you need to do more general diagnostics.
    Run your MacOS hardware diagnostics by putting your OS boot CD in your optical drive, and hold the D key down when you boot.
    You can also hold down C when booting and when the installer appears, go to the menu and run Disk Utility, and verify at least your primary drive.

  • MacBook Air Camera is not connected after mac OS update

    MacBook Air Camera is not connected after mac update
    I have a MacBook Air OS X version - 10.9.4 . I updated my mac 1 week before but todayI check that my mac in built camera is not working Even I try to check in this thing in all the apps. Please provide  the way how to sort out this issue asap.

    Use the suggestions here: http://support.apple.com/kb/HT2090
    The SMC reset often fixes your problem.
    Be sure you follow the instructions for your particular Mac model.
    If your problem continues, restart Mac.  Then download and install OS X Mavericks 10.9.4 Update (Combo).
    If that does not correct the problem, reinstall Mac OS X.
    If nothing else works, contact your Apple Service provider or Apple MacBook Support for help.

  • Canon scanner not recognised after Mac wakes up.

    Hi
    I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
    But since upgrading to Leopard a few months ago I've been having trouble with it.
    What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
    I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
    Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
    I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
    I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
    Any way to get this to stop happening?

    Bump
    Joey Goldstein wrote:
    Hi
    I have been using a Canon LIDE 60 scanner since I bought my eMac 4 or so years ago. It's always worked fine.
    But since upgrading to Leopard a few months ago I've been having trouble with it.
    What happens is that after the Mac goes into deep sleep mode (it's set to have the hard drive sleep too) and the scanner is not recognised after the computer wakes up.
    I get an error message when I open up a TWAIN program (CanoScan Toolbox or Image Capture) saying that there is no scanner available.
    Sometimes, usually actually, if I disconnect the USB cable and then re-attach it the scanner becomes available again. But sometimes not.
    I have what I believe to be the most recent driver for this scanner, dl'd recently from Canon's web site. First I uninstalled the old driver and then restaterd my eMac before installing the new driver.
    I'm using whatever version of Image Capture came with Mac OS and I'm using CanoScan Toolbox version 4.9.3.4 (version 5.0 does not work at all).
    Any way to get this to stop happening?
    Message was edited by: Joey Goldstein

  • S230U Twist - Camera no longer works after Win 8.1

    Hello all! 
    I've scoured the forums and tried EVERYTHING but I still cannot find a solution to my problem:
    After I upgrade from Win 8 to Win8.1, my camera no longer works. It shows a gray screen with a camera and a diagonal line across it but the green camera light shows up; I also get a shutter sound when take a picture but the image is only of  the aforementioned gray camera screen. I can't use the camera for video in skype or any other video chat function. 
    My Integrated Camera driver version is 3.4.7.26 (SunplusIT) dated 3/15/2013. I tried to upgrade but it seems to be the latest one. 
    I've also checked that the Lock Screen setting is set to ON for "Swipe down on lock screen to use camera". 
    SOMEONE, please HELP!

    Hi,
    Welcome to Lenovo Community Forums!
    I'm really sorry to hear that when you try to use webcam in your Lenovo S230U Twist, you are getting a crossed camera image.
    Check if your camera is in normal or private mode. This could be happening because you might have set your camera in private mode.
    Go into Lenovo Settings App and select camera.
    There will be the options of Private and Normal.
    Select Normal.
    Also, in Settings > Permissions, make sure that Skype and other similar apps have permission to access the Webcam or Microphone.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • BlackBerry Classic front camera no longer works after update

    The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

    Hi,
    the Classic was shipped already with 10.3
    What 10.3 version do you mean exactly?
    Alex
    Please feel free to hit "Like" if my post was helpful :-) Thank You!

  • Sony Ericsson no longer iSyncs after 10.4.7 update

    Has any other SE 910a owner run into the same situation with 10.4.7 where it no longer iSyncs? I tried to find a new ISync Agent for the phone, but a search of the Apple site for iSync Agent turn up nothing-curious.
    The Apple Store Tech support suspects it has something to do with the 10.4.7 upgrade and that I should report and post it in the Forum, so here I am...
    Help!!!
    Thank you

    No, mine is syncing perfectly post 10.4.7 update. I had some difficulty with syncing it to .Mac but that seem to fix itself after BOTH my PowerMacG4 and my Powerbook G4 were both updated.
    The only thing that I can suggest is that every now and then I find that the iSync agent on the P910 doesn't appear to be recognised. All I do then is to go to applications in the phone, choose the iSync agent, turn the iSync agent off, ie. tell it not to sync, then turn the iSync agent back on again (not the phone, just the agent). That has so far fixed the problem for me every single time.
    Hope that works for you.

  • Camera No Longer Compatible After Upgrade

    I just upgraded to Mac OS 10.4.8 and (I think) iPhoto 6.0.5. My cameras will no longer work with iPhoto, although they did previously - specifically the Canon Powershot SD400 and the HP M417. Any idea why this is happening? Is it something I'm doing wrong, or did the upgrade make it so my cameras were no longer compatible?
    Thanks for any suggestions!

    Lexi:
    Welcome to the Apple Discussions. With the camera connected go into the System Profiler (select the About this Mac under the Apple menu and then click on the More Info button. Under the USB section see if the camera is being recognized. If it is then some maintenance is in order for your account and iPhoto.
    First run Disk Utility and repair disk permissions. If that doesn't help, download and run the 10.4.8 COMBO updater from Downloads. Follow that by another repair of disk permissions.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD,   Mac OS X (10.4.7)   22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

  • Import form cam no longer works after Update to iLife 09

    Hi, I've updated to iLife 09 and installed the most recent patches. With iLife 08 my Fujifilm Finepix F30 was recognized by my mac book pro, iPhoto starded up an the contet of the cam was presented for import as soon as I connected it by USB. With iLife 09 all this no longer works. iPhote is fired up but nothing else happens but that iPhote freezes so the only thin I an do is to kill it ... now it's more or less useless for me
    Please help !
    TIA
    frantek

    Start with the troubleshooting basics:
    1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    2. Repair Permissions using Disk Utility
    3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • HP OfficeJet 8620 Scan to Network Folder No Longer Works after Mac OS X 10.10Yosemite Upgrade

    My scan to network folder function no longer works. When I look into it, I get an error message when I test the Network Folder setup saying, "Incorrect credentials. Check your username/password and try again."
    The username and password are unchanged. I just bought this AIO and I kinda need this function to work. I hope that 10.10 didn't just disable this function.

    I have followed your recomendation step by step but did not work. The message "Incorrect credentials. Check your username/password and try again." keeps showing once I test the credentials.
    After several hours of work this is very upsetting. What other option are to set up using Mac Book Pro and Yosemithe?
    Thanks
    LN

  • Downloading Sony camera DSC P8 software to MAC OX X (10.4.10

    I recently purchased this MAC and wanted to upload pics from my Sony DSC P-8. The software CD that came with the camera says its for MAC OS 8.51/8.6/9.09/9.1/9.2. When I tried to install the CD, it signaled that its not compatible. I haven't been able to get any info from Sony.
    Can you help?
    Thanks

    Forget the CD. Plug in the camera and iPhoto will launch and ask you if you want to load your pics from the camera. It knows how to do it already.

  • My iPhone 5 is no longer recognised by Mac computer in iTunes .

    Following  iPhone 5 upgrade to ios8 I had problems with my phone sending texts in some else name, with whom I share iTunes accounts.it also made his phone ring . Having been advised to go into settings then General then handoff and switching them off ,my phone now operates independently but does no longer appear on iTunes screen  on our home Mac and will therefore not sync either via wifi or whin connected. What do I need to get this fixed?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • First Generation iPad No Longer Recognised after iTunes 10.6 and iOS 5.1 updates, help me!

    I recently updated the version of iTunes on my early '06 iMac (17" 1.86GHz Intel Core Duo, 32-bit, 1.5GB RAM, OS X 10.6.8), to version 10.6 and the version of iOS on my first model iPad to 5.1. Since the update, it no longer shows up in iTunes despite it working perfectly fine.
    There is nothing wrong with the hardware or the connecting cables, I am unable to diagnose any possible cause of the issue as no error messages are presented on either the iPad or in iTunes. I cannot use my iPad without connectivity with my desktop computer.
    Is this problem a bug in iTunes 10.6 or iOS 5.1?
    Frankly I am appalled, it seems as though Apple didn't fully test either update before release.
    And I am not going to use Wi-Fi sync as a workaround. I need the security provided by a direct cable connection to the machine my iPad is synced with.

    Unfortunately it was a blinding flash of the obvious that fixed my issue...
    Simply rebooting the iMac brought it back to life.
    Duh.
    I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

  • ITunes no longer works after Mac software update

    I have allowed my Mac to update its software today. Ever since it completed the update, iTunes won't run. It is the latest version (also downloaded today), but a message pops up stating that 'you cannot use iTunes with this version of Mac OS X'... What's up with that?

    Dropping the bandwidth in iChat to 500 kbps and changing the QuickTime Streaming settings to no more than 1.5Mbps... seems to work. So far testing with my company this morning, my iChat video has not frozen up after about a 5 minute test.
    The video quality is not as good as in the past, but at least it is working so far. Hopefully Apple will fix this soon, but THANK YOU for this temporary solution. Work is possible again.

Maybe you are looking for