Sony Charger with output: 5.0VDC 850mA and serves on the Xperia Z1?

I have a Sony Ericsson Type CAA-0002016-BR with output: 5.0VDC 850mA and. Wonder if this charger is compatible with the Xperia Z1, once your charger has 1500mA output 5.0VDC and.
Thank you.

Well,there should not be any problems.However,it is recommended to use the chargers that come with the phone.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.

Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem.

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

Since there's no one side on a lightning cable, make an appointment with genius bar for an evaluation.

Correct binding order in a Cluster with logical switches, NIC teams, and vNICs on the host.

I have seen many recommendations to set the network binding order on you Hyper-V hosts to something similar to:
Management NIC
Cluster NICs
iSCSI NICS
However, all of these recommendations are for scenarios where the NICs are all physical NICs in the host.
Using Server 2012 R2, I am building converged networks with logical switches, NIC Teams, and vNICs on the host. So when I go set the network binding order, I now have all these components to deal with as well. For example, on a 4 adapter blade,
I might typically have the following items in the binding order drop-down.
4 - physical NICs (2- teamed for the 1 virtual switch, the other 2 used for iSCSI)
1 - Team interface (Datacenter_Switch)
5 - vNICs (Management, Cluster, LiveMigration, iSCSI-1, iSCSI-2)
So, should you only worry about order of the vNICS (placed at the top) and let the other components just fall to the bottom of the list? This seems to be likely to me, since the binding order applies to service access to the resources, and the other
components are not being directly accessed by network services?
Or, should the order start out with the physical resources needed to access the vNICs, followed by any intermediate resources (switches or team interfaces, then the vNICS themselves, to ensure that the resources are available to the subcompnents accessing
them?
Any help would be appreciated.
Thanks.
-Tim Reid

If by 'network binding order' you mean the order set in the Advanced Settings of the Network Connections of the Control Panel, then the most important one is to make sure the domain network is at the top of the list. Whichever network is at the top
of the list is used first for auth functions. So auth functions perform best when the proper network is placed first in the binding order. After that, I don't know that it makes much difference at all. (If it does, I'm sure my statement will
start a lively discussion. <grin>)
. : | : . : | : . tim

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing thi

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

I was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

i was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

Launch Mail.
Start "New Message".
Click "View" in the menu bar and then "Customize Tool Bar".
Customize Toolbar sheet should drop down.
At bottom left there is "Show" pop up box, click it and select "Icon and Text".
Click "Done".

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame st

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.

brings the image back, straightened, but with the skewed back ground frame
PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it.

My wireless mouse for my iMac keeps loosing connection. Started after I was having problems with computor not waking up and I put the the setting to "never". Anyone having same problem?

My wireless mouse for imac keeps loosing connection. Started after I was having truoble with computor not waking up and I put the setting to "never sleep". Any suggestions?

If it's an Apple mouse, make it "Favorite" in Bluetooth preferences.
If it's not, the same thing might help, too, but if the problem continues it could be a driver issue (possible incompatibility with your OS X version).

HT1222 How can I check if I currently have QuickTime 7? Is there a charge for QuickTime 7.7.3 and what is the charge for the QuickTime 7 Pro registration?

How can I check if I currently have QuickTime 7? Is there a charge for QuickTime 7.7.3 and what is the charge for the QuickTime 7 Pro registration?

This is the iPhone forum, you should check the Quicktime forum. But, to try and help a little, I would say go to Help, About Quicktime and it should tell you what version it is. Also, Quicktime Pro does have a cost involved.

Has anyone gone to Europe from US and used the IPAD charger with only a plug adadpter and had no problems?

Has anyone gone to Europe from the US and used the IPAD charger with only a plug adapter? I want to be sure I won't burn up my IPAD.

Just using an adapter will be fine. The charger can handle to 220V just as well as the 110V

My ipod touch wont charge and it will only heat up and it charges only once in a while and after that the batery drains very fast even when i put it on airplane mode and close the apps once im done with them please help

When i plug in my ipod to the comp it wont charge even if i keep it plugged in for an hour but it heats up like crazy i have also got the temperature warning once , it charges only once in a while and and my ipod nano works fine when i plug it into my comp so please help

Try here:
iPod touch: Hardware troubleshooting
However, from yur symptoms Isuspect a hardware probblem like a dead battery. An appointment at the Genius Bar of an Apple store might be in order.

Calling stored procedures with output parameters using RDO and VB

I have a simple test procedure defined as follows:
CREATE OR REPLACE PROCEDURE test_sp (inval1 IN VARCHAR2,
inval2 IN NUMBER, inval3 OUT VARCHAR2, inval4 OUT NUMBER) IS
BEGIN
inval3 := 'RETURN TEST';
inval4 := 10;
END;
I am attempting to call this procedure from VB 5.0 using RDO and the Oracle ODBC Driver 8.01.06:
dim rdoQd as rdoQuery
dim grdoCn as rdoConnection
strSQL = "{ call test_sp('SOMETHING',?,?,?) }"
Set rdoQd = grdoCn.CreateQuery("", strSQL)
rdoQd(0).Direction = rdParamInput
' get error# 40041 at above line
' "Object Collection: Couldn't ' find item indicated by text."
rdoQd(0).Type = rdTypeINTEGER
rdoQd(0).Value = 5
rdoQd(1).Direction = rdParamOutput
rdoQd(1).Type = rdTypeVARCHAR
rdoQd(2).Direction = rdParamOutput
rdoQd(2).Type = rdTypeINTEGER
Set rdoApp = rdoQd.OpenResultset()
MsgBox (CStr(rdoQd(1)))
MsgBox (CStr(rdoQd(2)))
When I run this VB code, I get the above mentioned error. If I use placeholders for all parameters (like "{ call test_sp (?,?,?,?) }" ), no error occurs.
I really need to use the first type of syntax from above and not have to use placeholders for all parameters. Is there a way to accomplish this?
TIA,
Esther

Are you getting any warning while importing the stored procedure?
Please check the below datatypes:
While creating the stored procedure, if you have used varchar(MAX), please ALTER it to varchar(255) and reimport to DS.
Also, the datatype of $message (global variable or local variable) used inside DS should also be varchar(255)
Try a print statement in between.
ADMIN.DBO.SPJOBSUMMARY(69,$message,$rtCode,$rtVal);
print('Message is '||$message);
smtp_to('leighattest.com.au', 'Results of ' || job_name(), $rtCode || '//' || $rtVal || '~~' || $message || '//', 0,0);
and see in the job log if DS is able to retrieve the output from DB.
Regards,
Suneer

Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

Dear all,
first of all thanks for reading this topic :-)
In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
We are using Outlook Anywhere, Active Sync and OWA.
Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
To install the mailbox role, I think this will not affect anything.
Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
Any help would be appreciated!
Jennie

Hi Jennie,
Below are the steps if you are not planning to upgrade.
1) Install new Exchange2010-SP3 Server all roles Please check
this
2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
this
3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
For OAB, Autodiscover, EWS please check steps 5,6,7in this
For setting OWA and ECP URLs please check
this.
4) Move few mailboxes as a test and check. If no errors move the rest.
5) Move your OAB generation server to the new server. Please check
this
6) Move you public folder contents to the new server you have. Please check
this
7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
8)
Add the new server as the source server and in the current send connector and remove the old server from the send connector.
Shutdown the server for a couple of days and monitor. So you will know if you missed something.
Uninstall Exchange2010 from the add remove programs.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

We bought a prepaid phone online with a 45.00 plan and cant get the minutes?

we bought a lg optimus zone phone on verizon website on june 19 2014 with 45.00 worth of minutes on the allset plan and they wont give us our minutes to use we have called and called them it took us over 5 hours just to get the phone activated alone.and then after that they said we did not have any minutes?we even went to our local verizon store and the guy there called verizon and they told him there was no record of us buying any minutes when we did and i have the receipt!we didnt know what else to do so i filed a complaint with the bbb on saturday 6-21-2014 if we still dont get what we paid for we will sue them fo alot more than just a 45.00 plan!

wadefamily28,
I truly apologize for the problems you had, I undestand how frustrating this can be and we truly want to help. We're unable to access Prepaid accounts, but once you call that number and enter your phone number as well as verification, you will have the option to speak to a representative who can help you.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Sony Charger with output: 5.0VDC 850mA and serves on the Xperia Z1?

Similar Messages

Maybe you are looking for