Sony dhr-1000 very bad deck .....

G4 dual 1.25 GHZ / 2GB ram/MAC 10.4.6 /FCP 5.0.4/TOAST 7.0.2/ILIFE O6.
2 internal DRIVE of 120 GB/4 external FW drives/2 pci FW-USB cards.
pci cards in slot 2 & 4.
this deck is not working with FCP or TOAST or whatever ......i think.
but the camcorder dcr-vx1000 work perfectly with all the above .......
what cause this bug ..... is it a FW bug .....why only with the dhr-1000, i got 2
dhr-1000 deck who display same problem .......
any feedback or work around posssible ..... i you got contact with sony please
forward this to them ..... this deck is similar to dvcam dsr-30 sony deck.

Daniel,
I have the Sony DHR-1000. Cost a bundle 4 or 5 years ago when I got it and it is one of the best purchases I have ever made--I love it. Have had it adjusted twice. Works flawlessly for me. Have used it with at least 2 different G4 computers and am now running it on a G5 DP2.5, OS 10.4.1, 4.5GB RAM, FCP 5.0
Sharon

Similar Messages

Sony DHR-1000 DV VCR no longer recognized

Pre-Tiger, I recall using my Sony DHR-1000 DV VCR in iMovie on my PowerMac G5 (which I sold). It's also in Apple's device compatibility list for older iMovie versions. But the VCR is no longer recognized on either my iBook or my Mac Mini. Both are running Tiger and iMovie HD. The VCR doesn't show up in the Firewire section of System Profiler. My Sony HDV camcorder shows up fine on both computers using the same cable.
Was DHR-1000 support pulled from Tiger? Are the iBooks and Mac Minis different in some way than the G5 PowerMac?
This is a $5000 VCR and it's now useless without Firewire import capability!

Aha ChromePlanet !
We share the same problem-mine in PAL.
This excellent link will take you to the some of the answers/noted problems.
http://www.sjoki.uta.fi/~shmhav/iMovieHD_bugs.html#quick_DVimport
I'm back to using iMovie 2.1.2 on a G5 2GIG so I can reliably do a long project with the DHR-1000. It can only be described in polite/very polite terms as "ridiculous."
Here's why:
1- iMovie 4.01 will import but on playback but will constantly have digital artifacts overlaid on viewing to external TV monitor. Pulling in/out the firewire cable from the deck (2x after a long moment each time)temporarily restores the picture until I click on a clip, bringing on the problem again. The solution is to use a camera to be able to view externally. Even then, I often have to reboot the computer otherwise there is no recognition of even the camera.
2- iMovie 3 similar problems
3- iMovie 2.1.2 works with Sony deck. instant playback view via external Sony deck.
Most of my projects are 2-4 hours. There is no other way to archive these without a DVCAM tape. Thus iMovie 2.1.2 is for me the only one of these versions I can trust.
And iMovie 5???
All the great advances in flexibility since version 2 mean little/mostly nothing in practice. So you have to ask Apple-Why is the firewire signal so weak in imovie?. I have asked , but no reply....
Was the Powermac you sold running Panther? Is that why the Sony deck was recognised?
Regards
Mark

Video resolution with Sony Alpha 7 is very bad

Hi!
The Videoresolution in PSE 13 Organizer is very bad. Looks like the Videos were made with a cheap mobile-phone.
Video playback works fine with every other Programm on my PC, for example VLC or Media Player, but when i try to view these Videos with PSE 13 they look awful - unsharp and blurry - same in Premiere Elements 13.
Have already tried to install Codec-Pack for Win 7, but no changes.
Maybe PSE uses a wrong codec? If so, how can i change this?
Camera is Sony Alpha 7, OS is Win 7, Graphichs card is CPU-built-in Intel-HD3000(don´t know if this matters?) with newest Drivers.
File extension is .mts, format is AVCHD (1920*1080) full HD.
*edit: maybe it´s helpful if i mention that CPU load is about 30-40% in PSE 13 compared to ~6% when using VLC or Media Player when playing these videos.
I would be grateful for any suggestions.
edit*
after some research:
let me clarify the problem: is there ANY WAY TO CHOOSE THE CODEC PSE 13 uses for videos??

Hi,
It is by design and we have no option to change it.
However, we can use Pan Control to enlarge and move around the screen.
Pan Control: The pan control enables the screen to be enlarged and moved around.
Enable the pan control: Tap the pan icon in the connection bar to display the pan control and zoom the screen.
Use the pan control: Tap and hold the pan control and then drag in the direction you want to move the screen.
Move the pan control: Double tap and hold the pan control to move the control on the screen.
Disable the pan control: Tap the pan icon in the connection bar to return the screen to its original resolution.
Thanks for your understanding.
Jeremy Wu
TechNet Community Support

Sony GVD-1000 a good choice for a MiniDV deck?

We need a fairly inexpensive (~$1,000) deck to use for reading MiniDV tapes. Is anyone using the Sony GVD-1000 with FCP? Does it work well? Are there any better choices?
Thanks for any suggestions!

Maybe take a look at this deck...JVC SRVS-30U(there may be a newer model available now). I used it at my previous job, and was pretty satisfied with it. Should still be well under 1K.
I'm currently working with a Sony GY-DV500 Walkman and am not happy with it at all. Several reasons, not the least of which is it only has analog inputs, no outputs. So I can't run my FW through it to a production monitor. Secondly, for it's pricepoint, I find it pretty featureless.
I looked at the specs on your model, and didn't see that many features on it either, but your needs may be different.
Just my opinion...others may have better ideas.
K

Trial Première pro CS3 combined with Sony DHR-1000NP/No sound rendering the Première Project

Dear friends,
I am a belgian and I have many years of good experience with Pinnacle DV500, Adobe Première 6.0 and the Sony DV Recorder DHR-1000NP.
As I want to make a further step, I downloaded the trial of Adobe Première Pro CS3; I installed this trial on 2 OTHER computers, Windows Professional XP , SP2. With both I have the same problem!
I get good .avi's from my DV tapes, played with the same Sony DV Recorder DHR-1000NP, over a fire wire, connected with the OHCI of the computer.
When playing the obtained Première project, the video and audio on the screen and the amplifier of the computer, are perfect; the videosignal over the firewire and the Sony DV Recorder DHR-1000NP is also perfect, but there is absolutely NO audiosignal reaching the Sony DV Recorder DHR-1000NP.
Who can explain me how I should manage that problem?
Thank you for helping!
With my best regards,
Marc

Beste Marc
Ik heb vandaag de upgrade gedaan naar Premiere Pro CS3. Ik werkt normaal op XP Pro, met capturekaart DVStorm2 (waarmee ik via Premiere Pro 1.5 goed kon werken. Hierop hangt mijn Sony DHR-1000NP.
Na de install van de CS3-versie heb ik geconstateerd dat de DVStorm2 niet meer werkt. Dus ik naar de winkel om een PCI-poort IEEE1394.
Het rare is nu...
wanneer ik de DHR-1000 hierop aansluit start Premiere CS3 op, maar vertelt me dat ik niet in EDIT-mode kan. Capture-window opent, ik kan de video besturen, maar de record-button is disabled.
Met een kleine camera (sony DCR-trv270e) lukt het wel.
Mijn vraag... hoe heb jij jouw DHR-1000 aan de praat gekregen?
Er is duidelijk niets mis met de PCI-kaart, wel met het toetsel dat ik aansluit.
In configuratiescherm komt onmiddellijk wanneer ik de DHR-1000 aansluit een "other devices" warning, geel vraagteken, met AV/C tuner, driver not installed. DOen heeft geen zin, er is geen driver voor.
Ik zou het echt op prijs stellen mocht je me op de goede baan brengen. Ik wil je eventueel eens bellen... mijn nr is 0485/30 31 97.
Van harte bedankt
Stef Ryckmans - Kortenberg

IMovie 9 can't Sony Camcorder (DSR-370) or deck (DSR-11)

iMovie 9 not able to recognize a Professional Sony Camcorder (DSR-370) or deck (DSR-1).
I just bought an iMac for video editing because of all the great things I heard about the Mac family. Well, I starting to feel sorry I did. Just to see if the iMac and it's basic iMovie can work with my Sony gear I did some testing. The iMac with iMovie are not able to recognize my Sony DSR-370 Camcorder or DSR-11 desk and this simply frustrating. I'm not new to computers or editing and I've worked with other NLE's.
Everything worked well under XP and Premiere. I have tried 6 different Firewire 800 to 400 connectors, cables and more and II still get the setup to see the camera or tape deck. I've changed cable many times and still not a darn thing.
Can anyone here give me a hint of what may being wrong? I hope to get my gear to work so I can get things done.
James

Take a look at this thread:
http://discussions.apple.com/thread.jspa?threadID=2447188&tstart=0
It is not reasonable to expect a computer to be compatible with absolutely everything; it appears Sony is very compatible with Windows, but I'm not so sure about Macs. I don't own anything Sony, but my Canon works just fine with my Macs and I do a lot of video and photo editing. And yes, Macs are great for that. I always check for possible compatibility issues before making purchasing decisions. If you Camcorder uses a memory card, it would be simple to use a card reader and get your footage transferred that way.
You might also want to look at these:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/9835.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19544.html
Message was edited by: Barbara Daniels1

Digitize Beta tape with Sony UVW 1800 Betacam SP deck

Hi guys
I'm trying to digitize Beta tape with using Sony UVW 1800 Betacam SP deck. We've tried so many ways but still no luck.....If anybody has successful experience with this, please share the wisdom...!!!
I wrote what we've tried so far.
From Sony UVW 1800 Betacam sp deck to Sony media converter DVMC-DA2:
-S video cable, From BNC to RCA video cable, Audio cable connected with RCA cable.
(I've tried S video cable and BNC-RCA video cable at a time and one at a time.)
From Sony media converter DVMC-DA2 to Macbook pro:
-Firewire 400w/ firewire 800
FCP 7 settings:
-DV-NTSC easy setup
-Device control preset: We've tried Non controllable device, Firewire NTSC, Sony RS-422
Sony UVW 1800 betacam sp Settings:
-VTR setting(Local/Remote) is on Local
Sometimes we've also tried Keyspan adapter with keyspan driver. Keyspan serial assistant found Keyspan device but doesn't seem like I can have deck control on my mac...We used Rs422 cable to Mini din8 cable to connect Betacam deck and Keyspan.
But in FCP, it keep saying 'no communication'....sometimes it says 'not threaded'.
We've hooked Betacam Deck to Sony monitor to see if we can see pictures but we can't see anything or hear anything.....We can see just timecode. We have PVM-14N6U monitor and we used BNC cable to connect those.
Again, if anyone knows any small thing about this problem, please help me.
Thank you!!!!
P.S:
Even about cheap and good Betacam repair shop info is really helpful to me...!:)
Does anybody know any store which can offer service like sending a person to fix Betacam deck?
Thanks again!!

OK...this hits me:
We've hooked Betacam Deck to Sony monitor to see if we can see pictures but we can't see anything or hear anything.....We can see just timecode. We have PVM-14N6U monitor and we used BNC cable to connect those.
You connect the deck to a monitor and don't see or hear anything. OK...is the deck WORKING? Perhaps you can't capture anything because you aren't getting a signal from the deck. The deck will have 2 possible outputs....BNC that's a COMPOSITE signal (meaning SD video, a complete, but low end video signal), and three separate ones known as COMPOSITE...R-Y, B-Y and G-Y. Try both of those on the monitor. There's also one called SUPER. This is a COMPOSITE signal that also displays timecode. If you can see timecode on the monitor, that means you are plugged into this. BUT, if you see timecode and no video image...that means that the tape is bad, or the video heads are bad....because you are getting a video signal from the deck, but no image from the tape.
So we aren't even talking about the Sony converter...right now just trying to get a good signal...and you can't even do that, right? Might need to try another deck.

Fios Internet connection is very bad! Please help!

Hello,
I play an online game called Final Fantasy XIV. I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS. I contacted WTFast with a tracert that they analyzed, and here is their response:
"Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
015-02-25 00:09:36
Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
—— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
February 25, 2015, 11:56
I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss. I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.
Can anyone help me out with this please! Thank you for reading!

bap4201 wrote:
I'm trying to, but can't seem to format it properly
Open a command prompt and enter the tracert command
then select the cmd prompt icon - top left of the cmd prompt window
select edit, mark
highlight the data you want to copy - the tracert data
select the cmd prompt icon again
select edit copy
put the cursor in the post window in the forum
and hit ctrl-v - as below
C:\Users\Peter>tracert wtfast.com
Tracing route to wtfast.com [190.93.243.228]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
.1]
3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
.212.48]
4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
51.220]
5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
6 * * * Request timed out.
7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
78]
10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
52.174]
13 11 ms 12 ms 11 ms 190.93.243.228
Trace complete.

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

The application DOCS doesn't work. Doesn't have HELP. it is very bad. Help me. My ID is regobarros.thanks in advance

Also it was not and never has been jailbroken if that helps.

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.

Bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID.

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

Sony dhr-1000 very bad deck .....

Similar Messages

Maybe you are looking for