Sony DSC-TX5 Videos with High Speed (Chipmunk) Sound
I just imported some videos shot using Sony DSC-TX5 (1280x720 "Fine" MP4). All imported files have their audio sped up, and consequently everything sounds like a chipmunk. Unfortunately, I deleted the movies within camera before checking the imported files in iMovie. But, new movies shot and played within the camera all seems to have intact audio when played within the camera.
I've also imported HD videos shot using Sony a55 and its audio remain intact.
Is there a fix for this?
I had exactly this problem, importing the video both from within camera, and taking the sd card out and putting it in a reader. I quit Imovie, reopened it. Then I reimported the video. SAME PROBLEM - no change. Then I restarted the computer, opened Imovie, reimported the video - now for the fourth time. AND EVERYTHING WAS FINE!! The audio was perfect.
So what caused this in the first place, and what happened in the reboot that fixed it? Beats me. One moral of the story is no matter how good Mac OS gets, rebooting the computer is always a good thing to try. Another moral of course is, don't delete any files until you know your imports are good and you have them backed up.
Similar Messages
-
I have slow internet speed and having issue with download of photoshop cc is there an alternate I can go somewhere with high speed to download. without using this creative cloud that downloads first.
We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
How to avoid losing data when communicate with high speed motor?
I connect with high speed servo motor via RS232. To avoid losing data. i thought to set receive buffer, only read the buffer if it collected all bytes. Is this possible?
Hi,
If you know the number of bytes you are trying to read, you can set a viRead call to return information once the particular number of bytes have been read. For more information on this, take a look at the KnowledgeBase article on a Serial VISA Read to read a requested number of bytes.
Even if you read before all bytes have been collected, you should not lose data. When the specified number of bytes are stored in the buffer, the viRead call will send the information to the program, and new data coming in will be stored in the buffer until the byte count is reached again.
I hope this helps,
Lauren L.
Applications Engineering
National Instruments -
I started downloading a rental movie on apple tv, but I live in a rural area with terrible Internet download speed...is there anyway to stop the download, and resume downloading, onto my iPad when I have access in an urban setting with high speed Internet?
Yes, to be honest I was a little surprised myself. But it absolutely didn't connect when plugged into the test socket (I even tried to force a connection from the Home Hub manager but it wasn't having it). It is definitely the master socket. The only extension is a small piece of (engineer installed) phone cable to link the hub and the master socket (because the socket and mains power are unhelpfully on opposite walls of the hallway).
I ran the Java download for Google anyway and it only took about an hour. The speedtester results are as follows:
Download speed achieved during the test was - 109 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :2560 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
I don't as a rule disconnect / reboot the hub; today it has been dropping off on its own, while several days ago I tried a few reboots just to try and get a connection.
Additional info - my exchange is actually called Claypole Fenton (or vice versa). Whatever, my profile has probably been welded to 135k for days and days.
Cheers
Nick -
When I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!
Suddenly now when I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!
Only songs that are physically stored on the iOS device can be deleted with a swipe. Songs that have been listened to, and are in the temporary cache, apparently can not be deleted with a swipe. The easiest way to get rid of these songs is to go to Settings > General > Usage, tap Music (you may need to scroll down in the list), swipe across "all music" then tap the delete button. This will delete ALL music on the device.
Also, iCloud and iTunes Match are not the same service. -
Aperture and Sony DSC-T100 videos
Hi, I just installed Aperture 3 and imported my iPhoto library but I can't open any video I took with my Sony DSC-T100 camera. The error is "unsupported video format". Do someone know how to fix this problem?
Have you tried different levels of compression with Adobe DNG converter?
The footnote on the Raw Support page http://www.apple.com/aperture/specs/raw.html says:
Aperture works with most DNG files generated from cameras that support this format and with DNG files generated by the Adobe DNG Converter with the “Convert to Linear Image” option turned off.
If DNG converter does not work, use the software that a came with your camera. The manufacturer's software will give you the best possible raw development any, since they do know the camera best.
It is hard to predict, when the RAW support for this camera will released, you could try to shoot RAW&JPEG while you are waiting and import the files with the JPEG as original. This can be changed to RAW as original, when the RAW support is available. -
Sony DSC-W1: Video imports w/o audio
My Sony DSC-W1 Digital Camera, which takes some pretty decent video, does not import the audio into iMovie. The video gets imported just fine, but the audio is not there.
The only way I could get around it was using Audio Hijack Pro to capture the audio for the video separately, and then importing that.
Does anyone have the same problem or know of a way to fix this?Hi tannyra:
I think you hve found about the best way already...
The Man Dan Slagle explains it best..Read more here:
http://www.danslagle.com/mac/iMovie/tips_tricks/6018.shtml
Sue -
Record videos with N95 in concerts = Sound distort...
If i record video in a concert of music with mi N95, the sound recorded is distorted, I think it is problem of low. Is it possible to resolve this for firmware?
Nothing ou can do about it!
It's an inbuilt chip that the Record industry insists are put into mobiles and recording devices to ensure you can't bootleg their concerts and so you have to buy their overpriced merchandice. Also it send a message to the local copyright lawers, so expect a nice lettter in the post in a few days...........
JOKE!!!!! -
Satellite L850-1R4 - Freezing with high pitched buzzing sound
Greetings.
I obtained this computer from my school, it was packed and not opened as far as I know(to my knowledge they didn't open 'em at least.) Around 5-6 times every day (Span of 6 hours at least) my computer freezes, with a very high pitched buzzing sound that sounds like a bloody drill.
I updated my drivers and everything, but this still occurs and I have to power restart the computer to be able to continue working/playing/watching anything.
How can I solve this?
Thank you and best regards.
Berkcan S.> Furthermore If I take it to factory settings (which I tried some months back) It gives me further crashes, freezes and blue screens.
Sorry mate but for me it sounds like an hardware problem. BSOD can be caused due serious software issue (compatibility between driver and hardware) or hardware malfunction but setting the unit back to factory setting should not cause an software issues. Therefore I presume an hardware part is the troublemaker.
The common parts like HDD or RAM modules should be checked firstly following by motherboard, CPU, etc -
I'm wondering if my cable internet is too slow for wireless streaming of videos to other macbooks. Any help will be appreciated
Can you clarify whether you are asking about video that you are streaming from the Internet to your Mac through the Time Capsule?
Or, are you asking about streaming video that is already stored on the Time Capsule to your Mac?
In either case, what happens....video quality wise..... if you test by temporarily turning off the wirelss on the Mac and then connecting it to one of the LAN <-> ports on the Time Capsule using a spare Ethernet cable for a few hours? -
Sony DSC-RX100 Video and Images supported?
Hey all,
I was wondering about if anyone has a DSC-RX100 that they have successfully used with iPhoto. Successful = imported video & images by connecting their camera to iphoto and clicking import.
I had a dsc-hv9v sony camera which was great until its demise. The issue was the images came over fine but the videos did not. (http://support.apple.com/kb/HT5251) Sony uses a MTS (AVCHD) format. Which seems to have issues importing to iphoto.
thanks9.4.1 iphoto
9.0.8 imovie also and video
video is MPEG-2 Transport Stream .MTS -
Is mini-dvi to video with higher resolution possible?
so i have an imac24 with an adapter to run to my flatpanel 1080i tv. when i plug in the adapter tiger obviously lowers the resolution and when it go to try and up the resolution it is not possible. i understand that it has to do that when the mac's display is cloned onto the flatpanel but when i want it to span, is it possible for me to have FULL resolution on my mac display and what ever resolution on my flatpanel?
on the pc, i have it set up like that and its able to handle both resolutions fine.
my objective is to be able to do one of the following:
run quicktime FULLscreen on my flat panel while still having access to my FULLresolution mac display (so i can play a movie or tv show on my flatpanel and still surf the net or run other apps simutaneosly(sp?) on the mac display)
or
run FRONT ROW on the flatpanel while my mac display is still at the full resolution doing its own thing.
i've worked with macs most of my life, but never got around to owning my own until now (i had to wait for intel chips =P) so i guess you could say i'm sort of a switcher although i work with them all day everyday for work.
anyways, i can do this with my PC just fine, the card in my pc is about 3 years old so i dont think its a hardware problem, i'm just not settled in with aqua yet so i'm asking for help.
anyone know how i would do this?
so to recap:
one imac display at full resolution (and no movie clone, at least not at full screen anyways) while the mac plays a movie full screen to another display (ie, my 1080i flatpanel tv).
thanks everyone.i understand that if i have the mirror turned off it works if i have quicktime running on my secondary monitor (my flat panel) but if i'm working on something else the audio will switch to what ever else i'm working on. it also renders my little apple remote useless.
can i tell quicktime to be dominant audio when its playing anything?
on another note, could i run frontrow independently on my flatscreen and still use my apple display for other applications without effecting playback on my flat panel.
with nvidia's media control (on PC) i'll have windowsmediaplayer running on one screen, and it clones the video only to the secondary monitor/tv while still giving me complete control to windowsmediaplayer on my primary screen.
can quicktime do that? or am i stuck just not-mirroring the displays and moving the movie over to the secondary screen and run fullscreen?
thanks JD for your post. -
Frequency measurement with High Speed Digitizer using External Trigger
Hello:
I have aHello Brooks:
Thank you for attention !
I will try to explain my application:
I need to measure a signal of a speed/position sensor. This sensor works with hall effect principle and is placed in front of a wheel with some teethes. Is used for automotive purpose in CAM and CRANKSHAFT applications. So, I need to measure period, duty cycle, rise time, fall time, Vpp, Angles for each teeth x encoder, everything from 40 to 7500 rpm.
I'm using CH0 to measure a signal of this speed/position sensor.
I'm using CH1 to measure a signal of an encoder connected to wheel.
I'm using EXT Trigger to sync acquisition with encoder's INDEX signal.
I need to measure the frequency of EXT trigger to know the instantly speed of the wheel.
So, If I know that my encoder has 2048 pulse/rev, I can measure FFT_FREQUENCY of CH1 with scalar measurement functions and calculate the speed !
The NI-Scope is wonderful because it can measure a lot of things automatic and fast, like period, frequency, duty cycle, rise/fall times ...
Now I have one more question:
I want to use 10:1 attenuation but I can't use a common probe. I want to connect the CH0 to sensor with a special connector.
I've tried to make the same circuit with 9MOhms and capacitor like explained on site, but I reached bad results. The industrial probes has special characteristics for capacitance and noise rejection.
Do you know how can I solve it ?
Thank you. -
Frequency measurement with High Speed Digitizer using External Trigger
Hello:
IHello;
That is happening because you are doing Software timed operation, and since Windows manages all tasks that runs on the machine at any given time, your VI might take different times to execute, and that might be enough for you to miss some pulses.
The best way to do that is by using a 660x board, and have three counters doing the job. The firts counter can be configured as the first pulse train generator, the second counter can be used to generate a pulse that will trigger the third counter of. That pulse will be generated when the delay of 90 degrees is reached. So, the second counter will count events and will be triggered of by the pulse train generated by the first counter.
The third counter is configured as triggered pulse train generator, and t
he output pulse of the second counter is used as the trigger pulse for the third counter.
If you don't use that approach, you won't be able to reach fast speeds and might also miss some pulses, due to the Software timed approach.
Hope this helps.
Filipe A.
Applicaions Engineer
National Instruments -
Issue with High Speed Internet
For the last 15-20 days my DSL connection drops between the hours of 5 pm and 9 pm. For about 4 hours I don't have internet. Connection sometimes pick up and then drops again after a few seconds.
I called Verizon customer support several times. Talked to several "technicians" on the phone and the problem continues.
They scheduled a technician to come to my home 4 times and nobody showed up. Nobody called from Verizon explaining why they didn't show up. And the problem continues. No internet for about 4 hours every day.
They don't seem to know what's going on. Every time a call I get different 'stories' about what the problem could be. Different reasons trying to explain the problem, but so far they just cannot fix it.
I think I am really wasting my time calling Verizon, but I will continue calling.
So far, Verizon customer service has been a horror. It is by far the worst support I ever experienced.
It seems to me that Verizon technicians are just ignoring the problem thinking that someday I will stop calling.
Is Verizon ever going to fix the problem?
Will a technician ever show up? (and really do something about it)
Is anybody else experiencing this kind of problem where connection drops in the evenings?
Please HELP!!....02/22/2014 03:50:12 PM -- MARK --
02/22/2014 04:13:32 PM syslog RENEW IP
02/22/2014 04:50:12 PM -- MARK --
02/22/2014 05:20:55 PM syslog RENEW IP
02/22/2014 05:50:12 PM -- MARK --
02/22/2014 06:50:12 PM -- MARK --
02/22/2014 07:24:20 PM syslog RENEW IP
02/22/2014 07:44:15 PM syslog RENEW IP
02/22/2014 07:50:12 PM -- MARK --
02/22/2014 08:50:11 PM -- MARK --
02/22/2014 09:44:59 PM syslog RENEW IP
02/22/2014 09:50:11 PM -- MARK --
02/22/2014 09:50:57 PM syslog RENEW IP
02/22/2014 09:55:43 PM syslog RENEW IP
02/22/2014 07:12:27 PM kernel Line 0: ADSL link down
02/22/2014 07:12:27 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 07:12:27 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 07:12:27 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 07:12:34 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:12:45 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:12:49 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:12:54 PM kernel Line 0: ADSL link down
02/22/2014 07:12:56 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:13:06 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:13:11 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:13:15 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:13:16 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4402
02/22/2014 07:13:16 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 07:13:16 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 07:13:16 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 07:13:16 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 07:13:16 PM kernel XTM Init: 400 tx BDs at 0xa337c000
02/22/2014 07:13:16 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4402000
02/22/2014 07:36:56 PM kernel Line 0: ADSL link down
02/22/2014 07:36:56 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 07:36:56 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 07:36:56 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 07:36:57 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:37:08 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:37:12 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:37:17 PM kernel Line 0: ADSL link down
02/22/2014 07:37:19 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:37:29 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:37:34 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:37:38 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:37:39 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4300
02/22/2014 07:37:39 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 07:37:39 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 07:37:39 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 07:37:39 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 07:37:39 PM kernel XTM Init: 400 tx BDs at 0xa336e000
02/22/2014 07:37:39 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4300000
02/22/2014 07:49:33 PM kernel Line 0: ADSL link down
02/22/2014 07:49:33 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 07:49:33 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 07:49:33 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 07:49:42 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:49:53 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:49:57 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:50:02 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:50:03 PM kernel Line 0: ADSL link down
02/22/2014 07:50:04 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:50:11 PM -- MARK --
02/22/2014 07:50:14 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:50:19 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:50:23 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:50:24 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4337
02/22/2014 07:50:24 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 07:50:25 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 07:50:25 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 07:50:25 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 07:50:25 PM kernel XTM Init: 400 tx BDs at 0xa336e000
02/22/2014 07:50:25 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4337000
02/22/2014 07:55:35 PM kernel Line 0: ADSL link down
02/22/2014 07:55:35 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 07:55:35 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 07:55:35 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 07:55:36 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:55:47 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:55:51 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:55:56 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:55:57 PM kernel Line 0: ADSL link down
02/22/2014 07:55:58 PM kernel Line 0: xDSL G.994 training
02/22/2014 07:56:08 PM kernel Line 0: ADSL G.992 started
02/22/2014 07:56:13 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 07:56:17 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 07:56:18 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4256
02/22/2014 07:56:18 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 07:56:18 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 07:56:18 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 07:56:18 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 07:56:18 PM kernel XTM Init: 400 tx BDs at 0xa336e000
02/22/2014 07:56:18 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4256000
02/22/2014 08:12:30 PM kernel Line 0: ADSL link down
02/22/2014 08:12:30 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 08:12:30 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 08:12:30 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 08:12:31 PM kernel Line 0: xDSL G.994 training
02/22/2014 08:12:42 PM kernel Line 0: ADSL G.992 started
02/22/2014 08:12:46 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 08:12:51 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 08:12:52 PM kernel Line 0: ADSL link down
02/22/2014 08:12:53 PM kernel Line 0: xDSL G.994 training
02/22/2014 08:13:03 PM kernel Line 0: ADSL G.992 started
02/22/2014 08:13:08 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 08:13:12 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 08:13:13 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4270
02/22/2014 08:13:13 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 08:13:13 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 08:13:13 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 08:13:13 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 08:13:13 PM kernel XTM Init: 400 tx BDs at 0xa2eca000
02/22/2014 08:13:13 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4270000
02/22/2014 08:14:45 PM kernel Line 0: ADSL link down
02/22/2014 08:14:45 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = DOWN, Service Support = ATM
02/22/2014 08:14:45 PM kernel HOST XTM Tx ch 0 down success
02/22/2014 08:14:45 PM kernel bcmxtmcfg: Connection DOWN, LinkActiveStatus=0x0
02/22/2014 08:14:53 PM kernel Line 0: xDSL G.994 training
02/22/2014 08:15:03 PM kernel Line 0: ADSL G.992 started
02/22/2014 08:15:08 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 08:15:12 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 08:15:13 PM kernel Line 0: ADSL link down
02/22/2014 08:15:14 PM kernel Line 0: xDSL G.994 training
02/22/2014 08:15:24 PM kernel Line 0: ADSL G.992 started
02/22/2014 08:15:29 PM kernel Line 0: ADSL G.992 channel analysis
02/22/2014 08:15:33 PM kernel Line 0: ADSL G.992 message exchange
02/22/2014 08:15:34 PM kernel Line 0: ADSL link up, Bearer 0, us=860, ds=4267
02/22/2014 08:15:34 PM kernel bcmxtmcfg: XTM Link Information, port = 0, State = UP, Service Support = ATM
02/22/2014 08:15:34 PM kernel bcmxtmrt: MAC address: 00 7f 28 ab 85 e0
02/22/2014 08:15:34 PM kernel [DoCreateDeviceReq.2603]: register_netdev
02/22/2014 08:15:34 PM kernel [DoCreateDeviceReq.2605]: register_netdev done
02/22/2014 08:15:34 PM kernel XTM Init: 400 tx BDs at 0xa2ef2000
02/22/2014 08:15:34 PM kernel bcmxtmcfg: Connection UP, LinkActiveStatus=0x1, US=860000, DS=4267000
Maybe you are looking for
-
I lost my i-tunes library on my vista pc while trying to install an update. How do i get it back
I have a pc running Vista. I got an update notice, but it would not upgrade. I tried to upgrade from download folder as suggested but somehow my entire i-tunes library is now gone. I have an external hard drive on this computer. Can I transfer my i
-
Dear Staff I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page
-
Setting Text over an Icon which is on a JLabel - Urgent
Can someone help me. I need to set some text over an Image/Icon which is placed over a JLabel.
-
Outlook 2007 won't connect / Autodiscover issues
Hello Foristas, I'm stuck ... so I hope someone will point me in the right direction. This is the scenario: Target: Migrate 2003SBS to EX2013. SBS hat been migrated to 2008R2 AD Server plus EX2010. This went without problems. Outlook and OWA worked j
-
How can I get the lib files which supported jsf?
In one book , That introduce me to get the lib files from a jsf folder ,after you install the jwsdk1.3 ,now ,I installed the 1.5,but I cann't find this jsf folder.where I can get these lib files ? Thanks very much.