Sony DSR-25 not found with FCP 5.1.2

Hi @ all,
I updated to FCP 5.1.2 to fix a dublicate bug with a Sony XDCam HD in 5.1.1 (http://discussions.apple.com/message.jspa?messageID=3269745#3269745)
This Problem was solved, but now i can't connect my Sony DSR-25 with Firewire to Mac. I have only one Firewire Onboard Slot and in 5.1.1 the DSR-25 worked fine. FCP doesn't finde the Deck
So did anyone have an intention or an idea what the problem could be with 5.1.2 ? Or did anyone has used a DSR-25 with FCP 5.1.2 already?
TOM

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Similar Messages

Dsr-11 not working with fcp

hello all,
i am running fcp 4.5. last night everthing was working fine. i started an update of my system before i left work. when i came in this morning fcp does not see my dsr-11? its not the dsr-11 as i tried it and the lead connecting it to my powerbook and it works fine.
help please
justin

Read my other reply to this problem in your other post...
Jerry

LiveType not intalled with FCP

For some reason LiveType was not installed with FCP. (My own fault im sure)
Can someone help me install it from the disk? Im using FCP 7, which has like 6 or more disks). Which disk is it on?
Thanks for the help.

FCP (final cut pro) comes as a part of the FCS (final cut suite)
FCS 1 had LT
FCS 2 had LT
FCS 3 has no LT
If you own a copy of FCS2 then you can use the disk(s) in that set and using a custom install, you can add LT to your FCS3

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

Sony DSR-1500a not recognized by Mac Pro 2009

My first post. Hope I'm doing this right....
I have been working with a Mac Pro 1,1 Quad (OS 10.5.6) using a Sony DSR 1500a DVCAM player/recorder with out any issue using firewire 400 and Adobe Premiere and FCS2. I have recently purchased a Mac Pro 2009 (OS 10.5.7) with FCS2 and with Avid MC 3.5.
I cannot get the DSR-1500a to be seen by the OS or FCS2. The only twist is that if I daisy chain my DSR-1500a thru my Avid DNA Mojo. I can capture into Avid Media Composer no problem. I use a FW400 (6pin) from the DSR to the Mojo and a FW400 (6pin) to FW800 cable from the Mojo to the Mac Pro.
I am starting to assume that using a FW400 (6pin) to FW800 cable does not work with the 1500a. I do not see it listed in system profiler when connect directly to the Mac Pro. I have adjusted the DSR setting to iLink and also have tried 9Pin setting but neither work. Tried more than one cable as well.
I can successfully connect my cheap Sony TRV38 via a FW400 (4pin) to FW800 cable but not the professional deck...Go Figure...
I know it's not the deck as it works with the Mac Pro 1,1 using the FW400. Is there an OS setting I am missing? Do I need to buy a FW 400 card? Please help! Thanks

As I suspected... I had to buy a 1394a firewire card to enable the communication between the Mac Pro and the Sony DSR-1500a. Apparently the DSR does not subscribe to the reverse compatibility that Apple has forced on us of going from a FW400 (6pin) to FW800 (9pin) in reverse compatibility mode. I guess Apple can take the Sony DSR-1500a off of their qualified hardware list. If I have missed something, someone please enlighten me. Until then, looks like Apple has struck again. Oh I know, I'll go out and buy a $1000 capture card. Wow! I thought I was getting a well engineered product, instead I got a money pit! Forcing a Mini Display Port down our throats, NO firewire 400 ports, 8 slots of ram on tri-channel memory...Who's the engineer that came up with that one? Screeeaaammm!!!
OK I feel better now... Who do I make the check out to? %#@^

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

HT4682 Sony HDR-CX230/B compatible with FCP X

I see that the HDR-CX230 and HDR-CX230E are listed as compatible. Is the Is the HDR-CX230/B also compatible?

The most accurate way to determine whether a camera works with FCP X is to actually try using it with FCP X.
Download the free 30 day trial of FCP X and find out for yourself
http://www.apple.com/finalcutpro/trial/
Note that you will need Mavericks . . . your info suggests you are still using Snow Leopard.
P.S. As the HDR-CX230/B is a bog-standard consumer camcorder it will almost certainly work with FCP X.
New camcorders are appearing all the time and Apple has neither the time nor the incentive to test them . . . the list of compatible cameras is essentially a waste of time and should be ignored.

Sony iPod Dock Not Compatible with iOS 4

I play a 3GS through a Sony HD-radio with a dock on the top. Upgrading the 3GS to 4.0 resulted in a popup that says "this accessory is not compatible with iPhone." It was yesterday - now it isn't. Apple: Did you break accessory compatibility on purpose? If not, will you please fix?
Message was edited by: Four to the Side

I invested in a nice expensive Sony wireless speakers sound system with an iphone dock. Worked perfectly until the stupid 4.0 update came out, and now it brings out the same stupid error message all the time and I can't play any streaming media, on the sound system, which was the main reason I bought the originally compatible sound system. Great job apple !! They are trying to expand too fast, and now they are producing mediocre products ! I am really upset about this ! I just want to downgrade the **** software back to 3.1 and then never update it again :?

"server not found" with one ip address but ok with vpn ip

Windows 7 For the last few days I get "server not found" message when I try to access many sites (including Mozzilla help). This happens with ie also.However when I use a different IP (via my VPN) everything is OK.
What is going on?

Server Not Found - Troubleshoot connection problems
*https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

HELP!! Nokia's API classes not found with j2me WTK

I setup j2me WTK, jdk1.4.2 and also Nokia's SDK (Series_60_MIDP_SDK_for_Symbian_OS_v_1_2_1) on my Win NT 4.0 machine.
J2ME samples (shipped with it) are working fine with ktoolbar. but when i try to build & run nokia samples, they are always giving error "FullCanvas class not found" and "package com.nokia.lcd.ui.* not found". I am sure it is the problem of placement of classes of nokia at correct place inside j2me's WTK. However, i followed the guidelines to install symbian sdk inside wtk401\wtklib\devices folder (as per instructions of forum nokia). But i am still not able to get it running. Any expert suggestions, then plz respond me , i am in urgent need to solve this issue!!!! plz help me!!!!

Hi,
Maybe I'm being thick but I can't get this work. I've tried zipping the com/nokia stuff into the midpapi.zip. And I've tried just replacing midapi.zip with classes.zip from the nokia emulator. But it still says:
"package nokia.mid.ui does not exist
import nokia.mid.ui.*;"
I'm using ktoolbar 1.04.
Many thanks!
CP
Hey, thanks for the great tip. Was also using
KToolbar because it runs faster on my slow laptop than
Sun One studio.
With the later version of WTK, the paths
C:\...\WTK21\lib contains 2 files, midpapi20.zip and
midpapi10.zip
The later contains classes for compiling to MIDP1.0
standard. I think most people use this. Replace it
the class.zip in
C:\Nokia\Devices\Nokia_7210_MIDP_SDK_v1_0\lib if
you're using the same SDK as I am, and don't forget to
rename it.
Cheers.

Class not found with jms cache sync

hi. when i try to use the remote command manager in my live environment only i get a class not found exception for my initial context factory. using a debugger i discovered this is actually hiding a linkage error. so i confirmed that my resin and java versions and all my jars are the same between live and stage, where this works no problem. but still doesn't work in production. any ideas what else i should look at? here's a stack trace
Exception [TOPLINK-22101] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.RemoteCommandManagerException
Exception Description: Could not obtain JNDI context with properties {java.naming.provider.url=tcp://10.10.6.73:3035, java.naming.factory.initial=org.exolab.jms.jndi.InitialContextFactory , java.naming.security.principal=tcp://10.10.6.73:3035, dedicated.connection=true, java.naming.security.credentials=tcp://10.10.6.73:3035}
Internal Exception: javax.naming.NoInitialContextException: Cannot instantiate class: org.exolab.jms.jndi.InitialContextFactory [Root exception is java.lang.ClassNotFoundException: org.exolab.jms.jndi.InitialContextFactory ]
at oracle.toplink.exceptions.RemoteCommandManagerException.errorObtainingContext(RemoteCommandManagerException.java:42)
at oracle.toplink.remotecommand.TransportManager.getContext(TransportManager.java:194)
at oracle.toplink.remotecommand.TransportManager.getRemoteHostContext(TransportManager.java:385)
at oracle.toplink.remotecommand.jms.JMSTopicTransportManager.getRemoteHostContext(JMSTopicTransportManager.java:270)
at oracle.toplink.remotecommand.jms.JMSTopicTransportManager.getTopicConnectionFactory(JMSTopicTransportManager.java:204)
at oracle.toplink.remotecommand.jms.JMSTopicTransportManager.createJMSTopicRemoteConnection(JMSTopicTransportManager.java:84)
at oracle.toplink.remotecommand.jms.JMSTopicTransportManager.createLocalConnection(JMSTopicTransportManager.java:106)
at oracle.toplink.remotecommand.jms.JMSTopicDiscoveryManager.startDiscovery(JMSTopicDiscoveryManager.java:44)
at oracle.toplink.remotecommand.RemoteCommandManager.initialize(RemoteCommandManager.java:132)
at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:509)

I would guess the problem is related to the application's class-loader visibility. Verify that your application can access the class org.exolab.jms.jndi.InitialContextFactory forio to launching the TopLink session. If it cannot then you may need to address the container's access to this library.
Doug

Extending Array class, get Error #1069: Property 0 not found with indexOf call

I'm using inheritance to extend the Array class to create a Paths class that moves Sprites/MovieClips around on the screen. I'm getting an odd error on a call to indexOf. Here's the error:
ReferenceError: Error #1069: Property 0 not found on Paths and there is no default value.
    at Array$/_indexOf()
    at Array/http://adobe.com/AS3/2006/builtin::indexOf()
    at Paths/Next()[D:\Stephen\Documents\Flash\TossGame\TossGameFirstPerson\Paths.as:40]
Here's the relevant code in the Paths class:
    public class Paths extends Array
        private var cCurrentPath:Path;
        public function Next():Path
            var lArray:Array = this;
            var lNextIndex:int = indexOf(cCurrentPath) + 1;
            if (lNextIndex == length) lNextIndex = 0;
            var lPath:Path = lArray[lNextIndex];
            return lPath;
    } // class
I get the error at the highlighted line. cCurrentPath is populated with a Path object which is the object located at position 0 of the this object (Paths). I've tried the following variants of the Next() function:
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = lArray.indexOf(cCurrentPath) + 1;
      if (lNextIndex == lArray.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = this.indexOf(cCurrentPath) + 1;
      if (lNextIndex == this.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = super.indexOf(cCurrentPath) + 1;
      if (lNextIndex == super.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
Same error happens whichever I try. Anyone got any ideas?
Stephen
Flash Pro CS3 (Version 9.0)

Mark your class dynamic.
public dynamic class Paths extends Array

"File not found" with CF 8 Developer Edition

Hello
I just installed CF 8 Developer Edition on a Windows XP Pro machine. CF Admin works well, so I know the CF server itself works. But whenever I try to run any of my own .cfm files from localhost or 127.0.0.1 it gives me a "file not found" error. Not sure what's going on.
Thanks
Khaled

How did you install ColdFusion? What web server are you using? What operating system? There are several possible combonations where ColdFusion looks for files and how one accesses them with a browser.
Depending on the choices you made during installation you could need to be using port 80, 8300 or 8500.As well as, your web files could need to be in c:\\inetpub\wwwroot\, /var/www, \Apache22\htdocs, c:\\Jrun4\servers\cfusion\cfusion-ear\cfusion-war\ or many other possibilites.

File not found with jfilechooser

When I try to open a file with jfilechooser, nothing happens except in command line it says File not found, has anyone got any clues as to why it is doing this. The code I am using for the filechooser is directly below and then the code I am using to read the file is below that. Thanks for anyhelp.
if (e.getSource() == Open)
log = new JTextArea(5,20);
log.setMargin(new Insets(5,5,5,5));
log.setEditable(false);
JFileChooser fc = new JFileChooser();
int returnVal = fc.showOpenDialog(this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
File directory = file.getParentFile();
teststore.loadStoreFromSerialFile(file.getName());
log.append("Opening: " + file.getName() + "." + newline);
} else {
log.append("Open command cancelled by user." + newline);
log.setCaretPosition(log.getDocument().getLength());
public static CarStore loadStoreFromSerialFile(String fileName)
CarStore store = null;
try {
ObjectInputStream os = new ObjectInputStream(
new BufferedInputStream(new
FileInputStream(fileName)));
try {
Object obj = os.readObject();
if (obj instanceof CarStore) {
store = (CarStore) obj;
} finally {
os.close();
} catch (Exception ex) {
System.out.println("File not found");
return store;
}

Why are you changing your
File file = fc.getSelectedFile();into
file.getName()?
Simple use: [http://java.sun.com/j2se/1.4.2/docs/api/java/io/FileInputStream.html#FileInputStream(java.io.File)]

Class:IF_RSR_LOOKUP not found with short dumps

Who can help to find this error
1) Error occured while communicating with BI server. As a result of this error, the system has been diconnected from the BI server.
Detailed Description: Class IF_RSR_LOOKUP not found
Resently we installed 64 Bit on our produktiv system after transporting planing objects. These objects were developed and tested on a 32 Bit version. Could this be the effect missing classes?
John Sevume

Hi
Please refer SAP Notes: 1142942, 1055449, 1124217
I believe this may be helpful
Regards
Ricky

Sony DSR-25 not found with FCP 5.1.2

Similar Messages

Maybe you are looking for