Sony DSX-MS60 marine radio issue with SiriusXM

I just installed a Sony DSX-MS60 marine radio in my 2009 Harley Streetglide. I replaced a Sony car radio I had on the bike for 4 years. Everything is working nicely except for one strange issue that will cause me to return the radio if I cannot find a solution. The problem is when SiriusXM is the source I cannot control the volume. It's either very low where you can barely hear it or blasting very loud. There is no in between. None of the other sources has this issue. The volume level works like it is supposed to with AM/FM, iPod and USB. I didn't test the external Aux. Anyway does this issue sound like something that can be resolved without exchanging the unit. Thanks

Hello Eric,
Make sure the remote commander jack is seated firmly on the head unit. If the issue persists, please contact our Technical Support team so that we can verify if the old commander is compatible with new unit. http://esupport.sony.com/US/perl/suppor ... dl=DSXMS60

Similar Messages

Possibly cell radio issue with lollipopo 5.1.1 update

hi all I thought update had gone ok. Very little battery usage when phone is in sleep/display off, etc. Used home wifi network a lot yesterday. Basically no data wifi. day 2 (today): I was out today and had my data connection (4G) on quite a lot (hadn't yesterday).Wasn't streaming or anything, just needed data for checking train times, google maps a bit - certainly nothing intensive.Phone was charged to 100% (switched off) then switched on at 9am ish this morningCell Standby reports, although only 5% of max battery usage, 24% time without signal (out of 8hr). This seems ridiculously high.I have noticed that my signal strength is frequently 1 bar with 4G.I noticed a bit of signal fluctuation, even with 4G switched off but virtually every time I got my phone out and 4G was on, it was on 1 bar of signal.I checked the battery history details:WiFi is indicated as active for the entire time I've had a shoddy mobile network signal - this correlates with my 4G usage.Other times when Wifi has been on (home network, not data), cell signal seems fine.I am on O2 in London4G can be a little up and down for me but has NOT generated this measure of cell standby / out of signal until 5.1.1 upgrade5.0.2 was ok, although tbh I use 3G most of the time, as I associate better battery usage when I don't use 4G.I was even in exactly the same locations using data, etc, as when I was with 5.0.2 ROM, so I'd not anticipate such a dramatic difference/drop in signal quality.I checked with 02 and there are no reported service issues in my area (checked via their website service status).I've just remembered that I had GPS on too but know, 100%, that Location Services was set to "device only", rather than high accuracy. You can also see from my battery history usage, how little the GPS was 'on' for.I am very surprised and disappointed at this. This suggests (to me) a radio issue in the latest update. However, I've not seen others complaining about cell radio issues, so can't corroborate/prove my suspicions. Anyone have any suggestions for me? Cheers, Gaz Screenshots:

uliwooly wrote:
@MyAliasIsGary Reinstall 5.1.1 with PCC, it's a pain but it should smooth things out, also turn off auto update apps and check if you are auto backing up with G+/photos PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 hi mate oh seriously though? A re-install? It took a day for me to get everything back in place (I wiped my internal storage), so I'd have a clean install of 5.1.1 (I wiped 5.0.2). So am I to do a repair or reinstall (or are they the same)? The only other thing I did yesterday was hold power button and volume-down until you get 3 buzzes - I read that this wipes the cache partition. It was suggested this could clean up sluggish performance after an update (although tbh I didn't find my phone to be sluggish). RE: auto updates. I've turned all them off. Also, things should not be syncing in background either (I'm careful to turn that off). G+ shouldn't be updating in background as I've disabled it lol In fact I've disabled most of the google stuff.RE: backing up of photos. This shouldn't be happening, at least going on the amount of data I've used today (only 17MB). Btw, could you just explain (or point me to an article) as to why I should use PC companion (rather than say just doing factory reset)? Cheers, Gaz

Sony NEX 6 RAW import issues with Lightroom 4.3RC or 4.2

Hi all, having a problem with importing images from my Nex 6 or SD card. The image was taken using the 16-50 Sony Kit lens
Lightroom copies the images (RAW) files without a problem. However within lightroom the images get distorted as shown below. I have disabled all options such as lens or camera correction.
The exact same thing happens when I import the file in photoshop CS5 after converting it using DNG Converter.
The original file within the sony software is like this.

What you are seeing in LR is the actual lens-distortion recorded on the sensor. What you’re seeing in the camera JPG is a in-camera-corrected image. Adobe hasn’t gotten around to make a lens profile for your NEX-7 16-50 lens; however, there is one available from the user-community you can retrieve with the Adobe Lens Profile Downloader:
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5492
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5491

AVRCP Buetooth issues with Mighty Mouse interference (?) and SONY CMT-HX5BT

Hello:
Just got a SONY Bluetooth enabled mini stereo system (CMT-HX5BT). Knowing my iMac with OS X 10.4 doesn't support AVRCP Bluetooth (another issue entirely!) I downloaded the Softstick Audio Gateway for Mac. This will allow me to play my iTunes music on the SONY stereo. However, when the Mighty Mouse is switched on, the playback is exceptionally fragmented and almost non-existent except very short bursts. When the MM is switched off everything works wonderfully.
I am hoping that whomever is responsible for BT in general did think that BT Mice would be used at the same time as stereos/headphones. Hopefully this is an issue with something other than BT in general such as Softstick, the MM, or OS X. Any ideas?
Does anyone think upgrading to Leopard, and using the operating system's built -in AVRCP support be better than a third party application? Although I haven't found conclusive proof that OS X 10.5 actually has AVRCP support either. Does this mean Logitech will be getting my business as I switch back to a regular radio frequency cordless mouse?
Thanks for any suggestions.

Thanks for your answer, no problem... it's OK
why don't you try with OS X 10.5... I guess the A2DP is built in Leopard (natively)
Today I saw the CMT-HX5BT at the local shop, they obviously have no clue about its functionality with a Mac, but that mini hifi looks great and it's not even that expensive...
maybe I should buy it anyway...

How to connect Lumia 820 with Sony DSX A50BT

Hi,
In my car am my mobile(Nokia Lumia 820) not able to connect with Sony DSX - A50 BT.
Is there any additional setting s require .
Please share the procedure.
Thanks & Regards,
Anuj Mittal

The DSXA50BT Car Stereo is a non-US model. Please reach out to Sony India Support here for best assistance with this unit. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

Is sony correcting the issues with the PS4 controllers. The material for the analog sticks need to be changed.

I would like to get a ps4 but both my friends ps4 controllers analog sticks are tearing. I have used both the ps4 controller and xbox1 controller, I like both but prefer the lighter feel of the xbox1 analog sticks they are more comfortable and durable. I dont want to buy a xbox1 but if sony does not correct this issue it will sway my decision. I really like the additonal power the ps4 offers but the controller is a major concern. When microsoft came out with the 360 it had reliability issues, microsoft instead of fixing the problem had consumers send there 360's in for repair. They would not admit they made a mistake with the design of the system and the so called repair was temporary for may consumers as it would just overheat again and you would experience the same red ring of death. My 360 broke 3 times which made me lose all faith in microsoft as a company. The decieved consumers instead of correcting the issue. I hope Sony learns from their mistakes. Dont send consumers the same flawed controllers, admit there was a production mistake and fix it!!! If you guys change the material and correct the issue please email me, if it is corrected I will be a playstation owner if not I guess I will have to go with microsoft. I would also love to see analog sticks with less resistance, closer to the xbox1 sticks.
Thanks for listening hope you take these comments into consideration.

Please share your suggestion on Sony PlayStation Community here. I'm sure they'd appreciate it. Thank you!
If my post answers your question, please mark it as "Accept as Solution".

Sony X85C - Bravia Sync Issue with Samsung Homecinema and WD Live Box

Hello I purchased the 2015 4k Sony TV X85c line, its the 55" with Model Nr: KD55X8507C (silver bezel). The latest Android TV version from mid July is installed and the TV is working fine - except for the interaction with my 2 other components:- a Western Digital Live streaming player box- a Samsung Homecinema HT-D6750W I knew i could run into problems when mixing up brands, but the issue now is really bugging me: The Samsung homecinema is connected via the HDMI 4 ARC to the Sony TV. The Westen Digital is connected to the homecinema. All devices are HDMI CEC compatible, thus on the Sony I can see the other devices and even control them with the Sony remote - which "concept wise" is really neat, but something is failing. It seems that the Sony trys constantly to switch between audio system (Samsung) and its own TV speakers when choosing how to deliver the sound. This somehow interfers with the menu dialogs of the Sony. As soon as I connect the Samsung Homecinema and go into the display menu to change image settings / modes it the menu will crash after some seconds (it just fades away). This does not happen when the homecinema is not connected, but then of course im missing the sound of my homecinema. So there seems to be a certain interference and I assume it could be because of the constant audio switching between TV and audio system. I already tried to deactivate all HDMI-CEC features on the devices, but for the Sony TV's bravia sync its impossible to deactivate fully (the menu is just greyed and "on"). I'm getting some new and state of the art HDMI cables later this day, maybe this will bring a positive effect. Anyone experiences something similiar with the X85C range of products? Is there a way to handle it? ThanksAndre / xenom0rph

I "solved" the problem: Bravia Sync does not seem to be compatible with HDMI CEC / Anynet of the Samsung homecinema. I deactivated all HDMI CEC features on the samsung player and the WD TV Live box, and then the deactivation of bravia sync was possible on the TV. After that the issue with the menu crashes was gone. Now i try to get digital audio with optical to the samsung player. So i connected optical out from the Sony TV to the optical in of the player. There are different settings to be made in the sonys audio menu now which I'm still not sure what to do. It has different compression modes for the audio (auto 1, auto 2, pcm). PCM seems to work for most digital audio content, but i fear DTS is not supported by the Sony. I tried the XBMC Kodi Android App on the Sony TV and got digital audio on some movies, but not all of em....not sure if its an app or TV problem. Oh well..for the moment i stay with the WD live streaming box which supports all audio formats and is connected via HDMI to the player, but its just a very slow cpu in there, so it would be cool to use the more powerful TV as streaming player.

Strange Issue With QIP 7100 STB and Sony Bravia TV

I am having a strange issue with a 27" Sony Bravia Television connected to a Motorola QIP 7100 HD STB.When viewing a non HD channel the television input number display, resolution display, picture mode display and clock come on and off every few seconds. The issue stops when I tune in to an HD channel. If I return to a non HD channel the issue reappears. I am new to FIOS from Directv where I did not experience this. The television is connected to the STB via HDMI. Everything else seems fine except for picture stuttering that I am getting on all of televisions but I'll save that issue for a separate thread. I tried removing the TV remote to no avail and changing the batteries in both the FIOS and TV remote with no success either. This is a very annoying issue and I feel that it must be caused by the STB. I was wondering if anyone experienced anything similar to this and if they were able to correct the issue. I would greatly appreciate any assistance. Thank you and Happy New Year.

It is possible that your Sony doesn't support the mode the STB is set to for SD (some HDMI TV inputs don't support all formats that the STB can output).
Have you tried going to the STB settings menu and under Video Settings played with the various options for 4:3 override? This setting controls the STB output for SD and lets you set 480i, 480p, and OFF (also STRETCH at least on some firmware version). In the OFF setting the STB upconverts your SD to whatever the HD resolution is set for - 1080i or 720p.
Hope that solves your issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

How do I fix the buffering issues with the radio app?,

How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate?

Aux input to car radio issue

I have a Sony radio in my car. And I connected my Xperia Z3 compact into the aux input, using a 3.5mm jack to jack. One side goes into my headphones jack and the other goes into the radio.
And annoyingly, the sound quality is bad. I get popping noises and like whistle sound and cracking noises. And it's driving me nuts because I can't listen to my music in peace.
Sad part about this is that every other device I've tried works fine, just my new Xperia that is having the issue. It was fine with an iPhone 5s and this other samsung phone I had. Which makes zero sense because the radio is also Sony, so it should work perfect with my Sony Xperia.
So frustrating, can anyone help please.

The 5-pole jack is compatible with 3/4-pole accessories (you can for example connect standard headphones without a microphone) but i remember a case where a user had a cable where the size of each pole was different compared to other 3-pole cables which could cause issues. If you hold the 3.5mm plug of these cables next to eachother, does the poles have the same size/placement?
Did you use the same cable when you tried the dock radio?
It could also be that the phone is having issues sensing that it's connected to another device. I'm not sure but i believe this depends on impedance. What happens if you force the output using an app like https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix?

Sony DSX-S310BTX and Samsung Galaxy S II

I recently installed a Sony DSX-S310BTX Digital Media Receiver in my truck and I paired it with my Samsung Galaxy S II running Android 2.3.6.
I am very happy with the unit but I love figuring out all of my options and I have been unsuccessful finding an answer through Sony's chat and email options. The main reason is because Sony's compatibility list for Samsung devices has not been updated to include my phone. (http://esupport.sony.com/US/perl/suppor ... nfo_id=653)
I am looking for someone who has experience with similar devices to help me out with a couple of questions.
1. I use the bluetooth stereo feature on the sony unit to listen to streaming music playing on my phone. Why does the “pause” light blink when listening to Bluetooth stereo? P. 37 provides directions for how to connect and play. I can successfully do this but the blinking pause light doesn't go away - it doesn't matter if I click pause on the unit or not.
2. I am having trouble adding phone numbers to the preset list. I have reviewed the manual. P. 36 provides instructions for how to do this. I can successfully complete steps 1 through 3. Step 4 simply says "send the phonebook data by operating the phone". I'm not sure what "operating the phone" means.
3. The "new text message" indicator doesn't work for me. Is there something I am supposed to do to make this work?
4. When the unit lights are "dimmed" does that mean its only the display screen itself and not the red/blue lights on the buttons?
Thanks for any help you can provide.

Hello,
Welcome to the User Discussion Forums.
after consulting with our Engineering team here are the answers to your question. Thank you for your post.
1. Why does the “pause” light blink when listening to Bluetooth stereo?
Three phones here were tested and none of them produced this issue. One phone was a Samsung Galaxy S II Skyrocket.
2. trouble adding phone numbers to the preset list.
Once you have set the head unit to receive the phonebook, on the phone you need to navigate to the contacts section where it has the option to send the phone book via Bluetooth. The term “operating phone” means the phone that you have successfully paired with the head unit. You are doing the correct steps, just need to complete them using the menus on the phone you have paired with the head unit.
3. The "new text message" indicator doesn't work for me. Is there something I am supposed to do to make this work?
We tested 4 phones and the Motorola Photon got the indication but the Samsung Galaxy S II did not, possibly an incompatibility with that manufactures ROM. please check with the manufacturer of your phone or your service provider.
4. When the unit lights are "dimmed" does that mean its only the display screen itself and not the red/blue lights on the buttons?
Yes, when using the dimming function the display is the only thing that dims.

Issue with Wireless AP.

Hi All,
Greetings.
we have an issue with user who says that he is unable to connect to AP and he need to re-boot it everytime to re-connect to it.
But when i check from WLC all the AP uptime is more than 150 days and the AP associate time of respective AP's is also more than 150 days.we are using cisco AIR-CT2504-K9 wlc and all the AP's are connected to Cisco 3750X and cisco4510R+E.please suggest.
pasting logs from wlc below.
Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 207) for client 88:53:95:7b:8f:56 / user 'unknown'
1 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
2 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
3 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 206) for client 60:c5:47:44:4d:d7 / user 'unknown'
4 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 191) for client 88:53:95:7b:8f:56 / user 'unknown'
5 Tue Feb 26 17:06:05 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
6 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
7 Tue Feb 26 17:06:05 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 190) for client 60:c5:47:44:4d:d7 / user 'unknown'
8 Tue Feb 26 16:51:24 2013 User guest logged Out. Client MAC:8c:a9:82:ae:a2:4a, Client IP:10.40.101.33, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
9 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
10 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
11 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 44) for client 10:40:f3:5e:3b:26 / user 'unknown'
12 Tue Feb 26 16:45:16 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
13 Tue Feb 26 16:45:16 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
14 Tue Feb 26 16:45:16 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 204) for client 10:40:f3:5e:3b:26 / user 'unknown'
15 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.34:1813 activated in global list
16 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 deactivated in global list
17 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 deactivated in global list
18 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 113) for client b8:c7:5d:e0:48:be / user 'unknown'
19 Tue Feb 26 16:05:29 2013 RADIUS server 10.12.2.33:1813 activated in global list
20 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 deactivated in global list
21 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 deactivated in global list
22 Tue Feb 26 16:05:29 2013 RADIUS server 10.19.3.104:1813 failed to respond to request (ID 132) for client b8:c7:5d:e0:48:be / user 'unknown'
23 Tue Feb 26 16:05:17 2013 User guest logged Out. Client MAC:00:22:fa:95:d2:58, Client IP:10.40.101.69, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
24 Tue Feb 26 15:42:36 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
25 Tue Feb 26 15:42:36 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
26 Tue Feb 26 15:42:36 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 111) for client 7c:c5:37:18:ca:2b / user 'unknown'
27 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 247) for client 68:a8:6d:e9:7d:36 / user 'unknown'
28 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
29 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
30 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 246) for client 68:a8:6d:e9:7d:36 / user 'unknown'
31 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 137) for client 68:a8:6d:e9:7d:36 / user 'unknown'
32 Tue Feb 26 15:35:53 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
33 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
34 Tue Feb 26 15:35:53 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 136) for client 68:a8:6d:e9:7d:36 / user 'unknown'
35 Tue Feb 26 15:06:17 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
36 Tue Feb 26 15:06:17 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
37 Tue Feb 26 15:06:17 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 67) for client 24:ab:81:af:2f:da / user 'unknown'
38 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
39 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
40 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 245) for client b8:17:c2:49:d5:37 / user 'unknown'
41 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 229) for client c0:9f:42:65:37:af / user 'unknown'
42 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
43 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
44 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 230) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
45 Tue Feb 26 14:49:54 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
46 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
47 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 228) for client b8:17:c2:49:d5:37 / user 'unknown'
48 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 243) for client c0:9f:42:65:37:af / user 'unknown'
49 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
50 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
51 Tue Feb 26 14:49:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 242) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
52 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 227) for client 0c:77:1a:a7:97:6e / user 'unknown'
53 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
54 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
55 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 226) for client 0c:77:1a:a7:97:6e / user 'unknown'
56 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 226) for client 0c:77:1a:a7:97:6e / user 'unknown'
57 Tue Feb 26 14:14:41 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
58 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
59 Tue Feb 26 14:14:41 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 225) for client 0c:77:1a:a7:97:6e / user 'unknown'
60 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
61 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
62 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 34) for client ec:85:2f:a2:4d:ba / user 'unknown'
63 Tue Feb 26 14:13:57 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
64 Tue Feb 26 14:13:57 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
65 Tue Feb 26 14:13:57 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 225) for client ec:85:2f:a2:4d:ba / user 'unknown'
66 Tue Feb 26 13:22:55 2013 Radar signals have been cleared on channel 52 by 802.11a radio with MAC: 00:1f:ca:cc:f0:00 and slot 1
67 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 214) for client e8:8d:28:7f:0e:5a / user 'unknown'
68 Tue Feb 26 13:20:02 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
69 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
70 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 213) for client e8:8d:28:7f:0e:5a / user 'unknown'
71 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 33) for client e8:8d:28:7f:0e:5a / user 'unknown'
72 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
73 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
74 Tue Feb 26 13:20:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 32) for client e8:8d:28:7f:0e:5a / user 'unknown'
75 Tue Feb 26 12:52:55 2013 AP's Interface:1(802.11a) Operation State Up: Base Radio MAC:00:1f:ca:cc:f0:00 Cause=Radio channel set. Status:NA
76 Tue Feb 26 12:52:54 2013 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:1f:ca:cc:f0:00 Cause=Radio channel set. Status:NA
77 Tue Feb 26 12:52:54 2013 Radar signals have been detected on channel 52 by 802.11a radio with MAC: 00:1f:ca:cc:f0:00 and slot 1
78 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 164) for client 7c:c5:37:18:ca:2b / user 'unknown'
79 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
80 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
81 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 163) for client 7c:c5:37:18:ca:2b / user 'unknown'
82 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 212) for client 7c:c5:37:18:ca:2b / user 'unknown'
83 Tue Feb 26 12:48:34 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
84 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
85 Tue Feb 26 12:48:34 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 211) for client 7c:c5:37:18:ca:2b / user 'unknown'
86 Tue Feb 26 12:45:09 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2019, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Clear
87 Tue Feb 26 12:42:07 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2019, Type: WiFi Invalid Channel[31], Severity: 3, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Set
88 Tue Feb 26 12:41:25 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2018, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Clear
89 Tue Feb 26 12:37:38 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2018, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:22, Previous Cluster ID: 1c:75:a0:02:41:22, Event: Set
90 Tue Feb 26 12:35:47 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2017, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 161, Cluster ID: 1c:75:a0:02:41:01, Previous Cluster ID: 1c:75:a0:02:41:01, Event: Clear
91 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 115) for client e8:8d:28:7f:0e:5a / user 'unknown'
92 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
93 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
94 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 114) for client e8:8d:28:7f:0e:5a / user 'unknown'
95 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 162) for client e8:8d:28:7f:0e:5a / user 'unknown'
96 Tue Feb 26 12:20:01 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
97 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
98 Tue Feb 26 12:20:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 161) for client e8:8d:28:7f:0e:5a / user 'unknown'
99 Tue Feb 26 12:18:26 2013 User inventiv-guest logged in. Client MAC:8c:a9:82:ae:a2:4a, Client IP:10.40.101.33, AP MAC:0c:85:25:c7:dc:e0, AP Name:NTW100-AP07
100 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 failed to respond to request (ID 106) for client a4:67:06:dd:ed:6a / user 'unknown'
101 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.104:1813 activated in global list
102 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 deactivated in global list
103 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 deactivated in global list
104 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 failed to respond to request (ID 105) for client a4:67:06:dd:ed:6a / user 'unknown'
105 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 108) for client a4:67:06:dd:ed:6a / user 'unknown'
106 Tue Feb 26 12:11:01 2013 RADIUS server 10.12.50.52:1813 activated in global list
107 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 deactivated in global list
108 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 deactivated in global list
109 Tue Feb 26 12:11:01 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 107) for client a4:67:06:dd:ed:6a / user 'unknown'
110 Tue Feb 26 12:10:12 2013 AP NTW100-AP07[1] (0c:85:25:c7:dc:e0) Device ID: 0x2017, Type: WiFi Invalid Channel[31], Severity: 0, Channels: 161, Cluster ID: 1c:75:a0:02:41:01, Previous Cluster ID: 1c:75:a0:02:41:01, Event: Set
111 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 68) for client 28:e0:2c:38:64:b3 / user 'unknown'
112 Tue Feb 26 11:45:29 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
113 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
114 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 67) for client 28:e0:2c:38:64:b3 / user 'unknown'
115 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 113) for client 28:e0:2c:38:64:b3 / user 'unknown'
116 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
117 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
118 Tue Feb 26 11:45:29 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 112) for client 28:e0:2c:38:64:b3 / user 'unknown'
119 Tue Feb 26 11:42:27 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
120 Tue Feb 26 11:42:27 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
121 Tue Feb 26 11:42:27 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 183) for client 7c:c5:37:18:ca:2b / user 'unknown'
122 Tue Feb 26 11:14:06 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
123 Tue Feb 26 11:14:06 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
124 Tue Feb 26 11:14:06 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 65) for client 7c:c5:37:18:ca:2b / user 'unknown'
125 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 93) for client ec:85:2f:a2:4d:ba / user 'unknown'
126 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
127 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
128 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 92) for client ec:85:2f:a2:4d:ba / user 'unknown'
129 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 200) for client ec:85:2f:a2:4d:ba / user 'unknown'
130 Tue Feb 26 11:06:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
131 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
132 Tue Feb 26 11:06:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 199) for client ec:85:2f:a2:4d:ba / user 'unknown'
133 Tue Feb 26 10:54:54 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
134 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
135 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 16) for client 34:15:9e:f0:00:bf / user 'unknown'
136 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
137 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
138 Tue Feb 26 10:54:54 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 90) for client 34:15:9e:f0:00:bf / user 'unknown'
139 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
140 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
141 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 38) for client ec:85:2f:eb:d0:0b / user 'unknown'
142 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
143 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
144 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 15) for client ec:85:2f:a2:4d:ba / user 'unknown'
145 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 31) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
146 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
147 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
148 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 32) for client ec:85:2f:eb:d0:0b / user 'unknown'
149 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 35) for client ec:85:2f:a2:4d:ba / user 'unknown'
150 Tue Feb 26 10:46:56 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
151 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
152 Tue Feb 26 10:46:56 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 34) for client 60:fa:cd:b6:f6:d6 / user 'unknown'
153 Tue Feb 26 10:41:10 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x319a, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c7, Previous Cluster ID: 1c:75:a0:02:40:c7, Event: Clear
154 Tue Feb 26 10:38:54 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x319a, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c7, Previous Cluster ID: 1c:75:a0:02:40:c7, Event: Set
155 Tue Feb 26 10:24:39 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x3197, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c1, Previous Cluster ID: 1c:75:a0:02:40:c1, Event: Clear
156 Tue Feb 26 10:22:46 2013 AP NTW100-AP17[0] (18:33:9d:b7:a0:70) Device ID: 0x3197, Type: WiFi Invalid Channel[31], Severity: 2, Channels: 6, Cluster ID: 1c:75:a0:02:40:c1, Previous Cluster ID: 1c:75:a0:02:40:c1, Event: Set
157 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 13) for client b4:f0:ab:06:25:b6 / user 'unknown'
158 Tue Feb 26 10:15:02 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
159 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
160 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 12) for client b4:f0:ab:06:25:b6 / user 'unknown'
161 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 30) for client b4:f0:ab:06:25:b6 / user 'unknown'
162 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
163 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
164 Tue Feb 26 10:15:02 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 29) for client b4:f0:ab:06:25:b6 / user 'unknown'
165 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 38) for client ec:85:2f:eb:d0:0b / user 'unknown'
166 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
167 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
168 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 37) for client ec:85:2f:eb:d0:0b / user 'unknown'
169 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 11) for client ec:85:2f:eb:d0:0b / user 'unknown'
170 Tue Feb 26 09:59:58 2013 RADIUS server 10.19.3.108:1813 activated on WLAN 1
171 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 deactivated on WLAN 1
172 Tue Feb 26 09:59:58 2013 RADIUS server 10.12.2.33:1813 failed to respond to request (ID 10) for client ec:85:2f:eb:d0:0b / user 'unknown'
173 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.33:1813 activated on WLAN 1
174 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.34:1813 deactivated on WLAN 1
175 Tue Feb 26 09:49:25 2013 RADIUS server 10.12.2.34:1813 failed to respond to request (ID 156) for client 8c:58:77:8e:a3:f6 / user 'unknown'
176 Tue Feb 26 09:46:41 2013 RADIUS server 10.12.2.34:1813 activated on WLAN 1
177 Tue Feb 26 09:46:41 2013 RADIUS server 10.19.3.108:1813 deactivated on WLAN 1
178 Tue Feb 26 09:46:41 2013 RADIUS server 10.19.3.108:1813 failed to respond to request (ID 16) for client 24:ab:81:af:2f:da / user 'unknown'

Can you post the output to the command "debug client "?
Can you try if the client has any issues if he was connected to an SSID with OPEN authentication?
Is the wireless NIC drivers updated?

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

New To Nokia And Having Some issues With N79

Hi
I have bought a Nokia for the first time ever and fancied a change from Sony Ericsson due to software issues, however i have been experiencing a few issues with my N79.
When listening to Music in the Music Player and change track, the phone will crash and keep restart it's self, so i tried searching online for the issue and didn't find much help, so i tried doing a Soft Reset wich didn't work.
I then tried a Hard Reset and have noticed some icons are missing and the preinstalled Wallpapers, Ringtones and Videos have been deleted.
I then downloaded and installed Nokia Software Updater and tried re-installing the phones software (wich is 11.049.53.1) thinking i would get back the Wallpapers, Ringtones and Videos ect but that didn't work...
And now the phone has developed another bug... Whenever i use the GPS it asks to go online and i click yes, the phone will just crash and restart and i have to take the battery out to get it to go off.
So far i am NOT very happy with the phone concidering the price i payed for it and having more software issues to deal with...
Any help would be appreciated...

Which map do you mean ??? And will it restore all the preinstalled content ???
Ive only had this phone a week after paying nearly £300 and im having trouble with it already...
Message Edited by jb1989 on 08-May-2009 01:40 AM

Sony DSX-MS60 marine radio issue with SiriusXM

Similar Messages

Maybe you are looking for