Sony dvd-rw dru-820a ata device on Windows 8

sao paulo, (Brazil), January 26, 2013.
Hi ! I´ve just converted my computer to Windows 8 and the Drive SONY DVD RW DRU-820A ATA DEVICE is not OPERATING any more ! Would you pleas help ? We need the computer for working purposes. Thanks,
jose gonçalves brazuna
phone: (55-11-3285-4625)
e-mail: [email protected] or [email protected]

Hello Jose,
Welcome to the Sony Community.
You can contact Sony Storage support team by e-mail at [email protected] for assistance
If my post answers your question, please mark it as an "Accepted Solution."
Thank you for your post.

Similar Messages

  • Device status code 10 on my Slimtype DVD A DS8AZH ATA Device With Windows 7

    I have been having a problem with the Base System device.  After reading up on it, I installed the Ricoh 5-1 Card Reader Driver.  Now I am getting the Slimtype DVD A DS8AZH ATA Device. Code 10.   How can I fix that?
    I have a Pavilion dv6000 and the driver cannot be updated and it worked not 10 minutes before I installed the card reader.

    Hi:
    See if running the microsoft fix it tool will help.
    http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    If that doesn't work then try the manual fix...
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756(http://support.microsoft.com/kb/322756/ )How to back up and restore the registry in Windows
    This problem is caused by two Windows registry entries that have become corrupted. To fix the problem, you have to use Registry Editor to delete the corrupted Registry entries. To use this method, you must be logged on to Windows as an administrator.
    Windows 7 or Windows Vista
    Click Start, and then click All Programs.
    Click Accessories, and then click Run.
    Type regedit, and then click OK.If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
    In the navigation pane, locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro​l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    In the right pane, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
    On the Edit menu, click Delete.
    When you are prompted to confirm the deletion, click Yes.
    In the right pane, click LowerFilters. On the Edit menu, click Delete.
    Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. When you are prompted to confirm the deletion, click Yes.
    Exit Registry Editor.
    Restart the computer.

  • Satellite C655-S5044 won't recognize TSST CDDVDW TS-L633C ATA device after windows 7 update

    Laptop: Toshiba Satellite C655-S5044; Windows 7 64-bit
    DVD Drive - TSST CDDVDW TS-L633C ATA Device
    After an automatic Windows update, the CD/DVD drive is no longer recognized.
    Running troubleshoot on the PC yields:
    Problem detected with TSST CDDVDW TS-L633C ATA Device Driver has been disabled
    Checking for new drivers says I have the latest.
    I tried running a microsoft fixit for DVD/CD drives - no problem found
    I tried deinstalling the driver, then rebooting.  This yields a message:
    Device Driver was not successfully installed please consult with your device manufacturer.
    I tried the TSST website for Toshiba and that rerouted me here.
    Searching the forums I have seen similar issues with other hardware/OS combinations but not exactly the same.
    Additional Info from the device manager:
    Device Type:  DVD/CD-ROM Drive
    Manufacturer: (Standard CD-ROM drives)
    Location:  Location 0 (Channel 1, target 0, Lun 0)
    I suspect that I have multiple device drivers on the computer for this device and the OS is installing one that doesn't work.
    How can I get the correct current driver and install it?
    Does anyone recognize this problem and have a fix?
    Thanks.

    Satellite C655-S5044
    I didn't find that model anywhere.
    Device Driver was not successfully installed please consult with your device manufacturer.
    The driver is native to Windows. Sounds to me like a hardware malfunction.
    After an automatic Windows update,..
    In a Microsoft forum, they would tell you to do a System Restore to before the Windows Update. If that fixed the problem, then apply the updates one at a time to identify the culprit.
    -Jerry

  • Mat**bleep**a DVD-Ram uj-850 ata device

    My 300 n100 does not recognize my dvd/cdrw drive.  I have looked everywhere for the software to dl for this and cannot find it.  The one site I did find it on was only applicable to sony devices and would not download.  I also attempted to uninstall the driver and reboot to see if it would dl something newer and it would not.  I have looked all over lenovo's website and am not finding anything.  Is it always this hard to get a driver update?  Is there another driver update I can use besides the Mat**bleep**a one?  Does anyone have a website that I can get a dl that will work?
    The website I went to was the www.techspot.com/drivers/driver/file/information/8137.
    Thank you

    Yeah, I know - it's the forum software's built-in smut filter working overtime.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Conflict with Sony DVD RW DRU-700A...............??

    I have a Creative Audigy 2 on XP Home.........using the Creative Organizer, I can't burn my cd because in Strument/Options/Burn...NO CD RW is displayed.....it's strange because I can burn my cd with Nero....... I already installed the latest driver for Audigy 2 and for Sony........but the problem remain....What can I do?
    Thanks

    This does work, I had trouble with both my sony's 540a and a 70a-dl.
    Also if you have NeoTV .0, this program when started will take out your dri'ves. It seems to be a burning engin conflict of some kind. I just found out about it myself. I can reproduce the problem over and over again. I have not found an coilation yet between SB and NeoTV, but the problem goes away when I uninstall it..so there is some kind of conflict their.
    Good Luck

  • Windows 7 (64 bit) driver for the matshita bd-cmb uj-120 ata device for my hp pavillion dv6478

    I recently upgrade my OS from Vista 64 bit to Windows 7 64 bit and the driver for my DVD player has a yellow question mark on it and I need to know if there is a driver for matshita bd-cmb uj-120 ata device for windows 7 64 bit

    Hi,
    Hope this helps:
      http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Slimtype DVD A DS8A1H ATA Device is recognized as CD Drive

    About a week or two ago,my DVD drive , a Slimtype DVD A DS8A1H ATA Device, began to display itself as a CD Drive even though it is a DVD Drive. I have already tried the sfc/scannow command, uninstalling the driver and reinstalling it, removing the higher and lower filters in the registry editor, and I still have the same problem. I have checked the HP  Support and Drivers website for any updates, but i have found none. Are there any solutions to this problem? Or ,at the least, may I get a website that has an updated driver for my DVD Drive?
    Thank You in advance

    There is no separate driver apart from the driver built into Windows....does the drive function correctly and the only problem is the identification in device manager? What happens if you put in say a Movie DVD or a DVD-RW disk blank?

  • Error message when burning to Sony DVD-r discs

    Just bought 200 Sony DVD-R printable discs from Costco, and I am trying to burn a 15 minute short film in DVD studio pro. The DVD just spins in Formatting and I get this message:The recording device reported the media error: Unknown device error.
    I have burned this same film many times with my Nexxtech DVD's and it works fine, but the Sony discs don't seem to work. Any suggestions?
    Thanks,
    D-

    Try burning at the lowest possible speed (probably DVDx2) and see if they work.

  • Third party software for sony dvd burner

    I would greatly appreciate anyone recommending inexpensive software that would work
    with a sony DVD/cd rewritable drive I just purchased. On the box it said it was mac compatible, but
    of course I later found out, only if you purchase mac compatible software. Sony provided a list of third party software that works with the device but its hard to know which ones work WELL with a Mac.
    (I have a mac mini.)
    Thanks for any tips.

    It should just be recognised anyway.
    You can use the Finder, a Burn Folder or Disk Utility to burn data discs.
    iTunes, Garageband to burn playable CDs and DVD backups.
    iPhoto to burn photo slideshows.
    iDVD burns DVD Video discs that can be used in any player.
    The most popular 3rd party software for convenience and ease of use is [Toast|http://www.roxio.com]
    There are many other free and not so free 3rd party applications at versiontracker.com.

  • HP DVD Writer 840b can't write to Sony DVD-RW

    HP DVD 840b can't write to Sony DVD-RW. I cannot "send to" the dvd nor save a simple file from notepad.  I can see the device in the device manager. I can also read and write CD-R disks, no problem. 
    I'm running Windows XP sp3 build 2600. 
    I did the following firmware update:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-40561-1
    No luck, I still can't access the Sony DVD-RW  disks.
    Any suggestions?
    Thank you.

    Try:
    Removing Upper and Lower Filters
    Step 1:
    Click
    Start > type "regedit" in the Start Search box, and then click "regedit" in the Programs list.
    Locate, and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    right-click UpperFilters, and then click Delete.
    right-click LowerFilters, and then click Delete.
    Step 2:
    Click
    Start, Right click on Computer and go to Manage, then in Computer Management, click Device Manager
    Click
    the "+" next to DVD/CDROM Drives and Right Click and Uninstall the Driver
    and check "Delete the driver software for this device" and click Uninstall
    Restart and Test the Drive ...

  • Sony DVD Camcorder to iMac

    I've been trying to figure out a way to import video from my Sony DVD camcorder. I've searched these forums and so far much of the advice is not to buy Sony DVD camcorders. While I understand the good intentions of this advice, I like all the other advantages which the Sony DVD camcorders offer.
    That being said, I have two questions which will help me decide whether I really should return the Sony DCR-DVD 205 and/or use a Sony DCR-DVD 305 instead:
    1) Some others have suggested exporting the A/V out from the DVD camcorder and feeding it into the analog port of a DV camcorder. I happen to have a DV camcorder (broken lens but fine for this purpose) which can record the analog input onto a DV tape. This allows me to use the firewire out from the DV camcorder to the iMac just fine. I have tried this technique and while it is a hassle it appears to work well. Here's my question: Am I losing a significant amount of quality or resolution by converting DVD to analog to DV to iMac? The picture quality seems OK so far but I'm wondering if I am missing something.
    2) So my next question is thiis: Is it worth getting the 305 model instead? Unlike the 205, the 305 has a USB 2.0 port. But from everything I have seen, USB 2.0 ports are far from ideal when it comes to transferring digital quality video.
    Thanks in advance. I am going a bit crazy trying to figure out what to do about this.
    iMac g5    

    welcome TeamIguana to the  board ...
    you've done your research on this board about DVDcorders, so you do know, the iApps don't support such devices ... you miss the convenience of simply plug-in/hit import/done... and some others...
    you have two options:
    convert from dvd (please use the forum search for that popular issue), or, as you wrote, a playback-analoge-digital conversion...
    the loss in pic quality happens while playback a dvd...- you record in a codec called mpeg2, which is a very, very effective compressor...- a standard iM project of 2h=~26GB gets compressed with mpeg2 to fit onto a 4.7Gb single-layer dvd-r...
    to be so effective, mpeg uses different "tricks", e.g. it doesn't store every frame of the 30fps a video contains... dv (as on miniDV, or iM's native internal codec) does so... as you probably know: mpeg2 is a delivery format, no edit format...
    so answer to 1): due to mpeg standards, you have a loss of pic quality. any miniDV would be ... better.- but it has to fullfill your tastes and standards, if it is ok to you.. just do it
    ad 2) iMovie doesn't support the import via usb2.- when you're lucky, you get some Sony-made app with that device which allows to remotely control the corder via usb2 to force it to playback/stream the video to the Mac.. HardDrivecorders behave like some ordinary harddrive, easy to drag'n drop file from them to the Mac.. but a DVDcorder? even, when you hit manually "play"... how should your Mac know what to do with that stream of data coming via usb??
    you guess it allready; I'm not convinced by DVDcorders
    so, just to feed my personal curiosity:
    I like all the other advantages which the Sony DVD camcorders offer.
    ... which one?

  • Sony DVD-R 1x - 8x compatible with iMAC G5 isight?

    I just purchased a box of Sony DVD-R and after reading the warning on the box I'm worried that it could somehow damage my MAC.
    It reads: "Always check if your drive is compatible as using this disc on some drives/recorders might damage the disc or device."
    How can I check if the Sony DVD-R 1x-8x is compatible with my iMAC?
    Thanks for your help.

    Lots of people report successfully using Sony disks. I myself prefer TDK or Fuji, but Sony will work just fine.
    I assume that they are the full-sized disks and not the mini-DVDs that are used in a lot of camcorders. If so, I can't imagine how that disk would damage any drive.

  • Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

    Driver files needed for the following Sony dvd/cd rom drive:  "dvd-rom  ddu 1615". 
    The dvd-rom drive will not read any type of dvd or cd.
    desktop computer:  Dell Dimension E310 , windows xp, service pack 3.
    This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.  
    Where can I find driver files for this dvd rom?
    Thanks,
    Denise

    Hello Denise,
    Welcome to the Sony Community.
    All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
    • Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
    • Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
    service, storage support email
    • Please remove your secondary IDE channel from the Device Manager.
    If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
    Thank you for your post.

  • No ATA device present?

    I have a macbook 2007 with a disc drive issue. I can put a cd or dvd in the drive, and it accepts it and spins it, but nothing is coming up on the desktop. And i cannot eject the disc either with the eject button or the manual ways i've read about (holding down the trackpad button during startup, the credit card method, etc.)
    I've restarted several time and I've attempted reseeting the power management. no change.
    I should also state that this is a drive that i have recently installed. the old one was bunk, and I have replaced it with another used one. However, it was working properly when I installed it. I have since having this current issue, gone back in a made sure everything is connected properly.
    Under the system profile it shows under ATA that no ATA device is present, and a similar message is showing under disc burning.
    is there any hope for this one, or do I need to blow more money on this thing?

    Wolczk, it was taken from a little bit newer model supposidly. The mackbook has a Serial-ATA hard drive. The optical drive shows up under hardware>ATA.
    thraex, I woudn't be surprised. However, i have taken it apart for the third time and removed the drive and reinstalled it, and now it seems to be working. So i guess I didn't have it plugged in all the way or something. No clue.
    thanks for the responses.

  • T61: Windows needs to install driver software for your ATA Device-help!!

    Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
    The DVD player has been out of commission all of May so far.  I can't stand this.  What is happening?
    I can't even download the driver from Lenovo.
    PLEASE HELP.
    Thanks in advance.
    You are a God if you can't help me fix this.
    Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
    Message Edited by Agotthelf on 30-05-2009 08:21 AM

    Welcome to the forum!
    Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Maybe you are looking for

  • Iphone 4 showing wrong IP address for home wireless

    2 days ago we reset our home wireless password and updated our devices (ipad, laptop, and two cell phones). Now my iphone 4 will no longer connet to the wireless. It accepts the new password to join the network but it never connects. It is showing wr

  • T.code MCBZ

    Dear all, When i execute the T.code MCBZ (Current Requirement/Stock). Total stock is not equal Goods issue + goods receipt.. could any one explain me why Regards venu gopal

  • Video Slideshows in LR 4.4 that can be viewed on a DVD Player?

    How do I create a slideshow video in LR 4.4 that can be viewed on a standard DVD player (or BluRay)?   I am using a PC running Windows 7.

  • Serious errors were during Font Validation.

    I am getting this message during installing font: Serious errors were found. Do not use this fonts. What does it mean. I am fresh Mac user

  • Help--how to check the exact time?

    Pls help me: How to check the accurate down-time when the Sun machine (with solaris 8 sparc) abnomally shutdown (eg. power failure)? or Is there any way to detect the exact time when I shutdown the Sun machine ? thanks.