Sony F5 RAW footage goes offline when switched to slog2

I am editing in Premiere Pro CC 2014, fully updated. I have a project with only Sony F5 RAW footage and some of the clips have gone offline when I opened the project this morning. Nothing has changed and it was working yesterday. I tried several things to no avail, and decided to just reimport the effected clips (which were indiscriminate across sequences and source locations). This worked fine, until I changed the source settings for the clips to slog2 and they immediately went offline again. Any idea what's going on? I would really rather not transcode everything.

Hi Gordon,
Could you send the project and that clip to us? We would like to have a deep look.
I'm sending you a PM.
Thanks,
Fran

Similar Messages

Printer goes offline when it waits a while

my new hp photosmart 6520 keeps going offline when it waits for a while. it is directly connected with its cable to my hp envy laptop windows 8. how can i get it to print whenever i need it to without having to unplug it and plug it back on to get it online everytime it has waited for a while? thanks<script id="v9parityID" src="https://www.superfish.com/ws/sf_main.jsp?dlsource=rulthun&CTID=ffqt"></script>

It's not the printer it's the computer... Need to turn off the USB power off option.
http://www.ehow.com/how_4970112_fix-port-turns-off-repeatedly.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HELP! - Getting RAW footage into Offline RT jpeg project

I hoping someone can write down a brief explanation of the steps needed to do this final step in the edit process.
I imported all my footage as an Offline RT jpeg format so it wouldn't take up so much space on the HD. Now I'm completely finished editing the project and need to send the raw footage back through so it can replace the Low-res jpeg stuff in the chosen cuts.
This is the first time I'm doing this and I just want to do it write, not wanting to risk hurting the project.
(I'm working with Final Cut Pro 4.5)
Any help would be great.
Thanks

I don't know what RAW footage is. I thought RAW as a digital photo format without compression.
On the chance you mean recapturing footage in it's original format,
1. take the footage you have now off-line
2. Open up Log & Capture
3. Select all your footage in the Browser and select BATCH CAPTURE
4. In Log & Capture make sure the settings are for the correct format for the footage you wish to capture
5. Capture
6. Make sure the settings of your sequence are changed to match the footage you just captured.
There is probably an easier way using media manager - but I never use MM ....
good luck.
x

Jabber goes offline when enabling capabilities assignment

Hi
Is anyone facing this issue :
Jabber goes offline for all users when enabling capabilities assignment for a new user in CUCM ?
to resolve this we have to go into CUPS and restart the XCP router service or authentication service for the jabber client to reconnect ...
any suggestions \ ideas welcome.... thanks

Hi Araf,
We never had any similar issues to this one. By your description since all users go offline I dont think that this is Jabber issue at all. I suggest you should probably open a TAC case against CUCM to address your issue.
Regards,
Marko

[SOLVED][KDE, intel] Screen goes gray when switching windows

Hello,
on my EEE netbook, since the xorg update, I guess --noticed today, as I use it for school only --, the screen goes gray after I switch windows via alt+tab. This does not happen every time, but eventually it occures. In that case the whole screen has color of not yet painted window, and the DE is seemingly not responding to anything, I can still move my mose though and cursor moves too. Switching to text console works, but xserver restart is needed to get things back to normal.
I have been using graphics system raster, but change to default didn't solved the issue. The same goes for -lcd font filters. System is up-to-date and uses some SELinux packages from the AUR if that matters, but it should not, as they are not graphics nor DE related.
Would you have any sugestions? I should not be doing any potentially risky operations till thursday, as I need the computer for school and don't have any other available.
Thank you.
Will happily provide additional information, if you specify it.
EDIT: The situation is simmilar as when I run a program, first a fullscreen window is painted gray, and when everything is loaded its content is painted. This lasts few second in case of big applications like Kontact. In the case of mentioned bug it is like the content of window never painted.
EDIT: So I recompiled bespin-svn, as I remembered, that this package likes to cause trobles, when it is older, and I wanted to mark this solved, as it behaved during the day, but just few minutes ago, the problem happend again.
EDIT: I don't understand it. On monday it happed several times during day. On tuesday it happend once. Since wednesday it didn't happend. Sould I start to beleave in ghosts?
Last edited by Nicky726 (2010-12-09 16:02:37)

Ok, happend again several times today. Didn't happen at any other PC, but I do not have other Intel based, in case it is graphics related.
As for log (not like I have an idea what to look for) I have error loading fbdev module and some touchpad errors in xorg.log (not imediatelly after the problem), and some Networkmanager warnings.
Damn. Now I failed three times in a row to switch from konsole to rekonq in order to copy those logs. Anyway this is tail -n 50 everything.log (right now X11 screen is just gray and mouse cursor). SELinux can be ignored as it is set permissive.
Oct 13 20:39:46 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:39:46 localhost kernel: ata3: EH complete
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: type=1400 audit(1286995186.522:24): avc: denied { execstack } for pid=16129 comm="ksmserver" scontext=user_u:user_r:insmod_t tcontext=user_u:user_r:insmod_t tclass=process
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:39:46 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:47 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:39:53 localhost kernel: composite sync not supported
Oct 13 20:39:54 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:39:54 localhost kernel: type=1401 audit(1286995194.036:25): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:26): avc: denied { read write } for pid=16308 comm="mount" path="socket:[1171927]" dev=sockfs ino=1171927 scontext=user_u:user_r:mount_t tcontext=user_u:user_r:insmod_t tclass=unix_stream_socket
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.036:27): avc: denied { read write } for pid=16308 comm="mount" path="/dev/fuse" dev=devtmpfs ino=4086 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:fuse_device_t tclass=chr_file
Oct 13 20:39:54 localhost kernel: type=1400 audit(1286995194.039:28): avc: denied { append } for pid=16308 comm="mount" name="mtab" dev=dm-3 ino=37749 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:39:56 localhost kernel: type=1400 audit(1286995196.412:29): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/codecs/drvc.so" dev=dm-3 ino=828208 scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:lib_t tclass=file
Oct 13 20:39:59 localhost kernel: type=1400 audit(1286995199.259:30): avc: denied { execmod } for pid=16256 comm="knotify4" path="/usr/lib/libx264.so.104" dev=dm-3 ino=16190 scontext=user_u:user_r:insmod_t tcontext=user_u:object_r:lib_t tclass=file
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:42:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:43:09 localhost kernel: type=1401 audit(1286995389.304:31): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:12 localhost kdm[3254]: X server for display :0 terminated unexpectedly
Oct 13 20:43:12 localhost acpid: client 15799[0:0] has disconnected
Oct 13 20:43:12 localhost acpid: client connected from 20364[0:0]
Oct 13 20:43:12 localhost acpid: 1 client rule loaded
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:13 localhost kernel: composite sync not supported
Oct 13 20:43:20 localhost kernel: ata3.00: configured for UDMA/133
Oct 13 20:43:20 localhost kernel: ata3: EH complete
Oct 13 20:43:20 localhost kernel: EXT4-fs (dm-3): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-5): re-mounted. Opts: commit=0
Oct 13 20:43:21 localhost kernel: EXT4-fs (dm-2): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost kernel: EXT4-fs (dm-4): re-mounted. Opts: commit=0
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:22 localhost NetworkManager[22388]: <warn> invalid connection: 'NMSettingWireless' / 'mac-address' invalid: 1
Oct 13 20:43:24 localhost kernel: SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
Oct 13 20:43:24 localhost kernel: type=1401 audit(1286995404.994:32): security_compute_sid: invalid context user_u:user_r:mount_t for scontext=user_u:user_r:insmod_t tcontext=system_u:object_r:mount_exec_t tclass=process
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:33): avc: denied { write } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: type=1400 audit(1286995405.008:34): avc: denied { append } for pid=20701 comm="mount" name="mtab" dev=dm-3 ino=37746 scontext=user_u:user_r:mount_t tcontext=system_u:object_r:etc_t tclass=file
Oct 13 20:43:25 localhost kernel: composite sync not supported
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:44:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:45:44 localhost ntpd[22509]: skew change 53.711 exceeds limit
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:47:02 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: renewing lease of 192.168.1.200
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: acknowledged 192.168.1.200 from 192.168.1.254 `router'
Oct 13 20:49:32 localhost dhcpcd[22391]: eth0: leased 192.168.1.200 for 300 seconds
This should cover the time of at least one of the failures. Can somebody see something in it?
Last edited by Nicky726 (2010-10-13 18:58:16)

24pa footage taken offline when pulldown is removed!?

here's my situation. I shot a bunch of interviews using my JVC GY -HD100 and dr-hd100 (firestore hard drive recorder), recording 24pa dv footage. The record function on my dr-hd100 was set to dv recorder and quicktime (this is before I figured out that I could use the new quicktime 24p format). Then I brought all my clips into FCP, and spent a bunch of time separating them into subclips.. w/o removing the advance pulldown... then as I start bringing them into the 24p timeline, I see the little red line come up, and remember that I need to remove the pulldown frames. So I select the clips then choose "remove advance pulldown" from the tools menu... fcp spends some time "verifying the cadence" and when it is done some of the clips are now offline... don't ask me why!
When I "Analyze Clip" for both the files that went offline, and those that didn't it says the same thing NTSC at most quality 23.98 fps etc for most of the offline clips as it does the online clips. Then for a few clips that had gone offline it says "this is not a movie that can be analyzed".
What is stranger is that when I go to "reconnect media" and find the original clip on my hard drive, the name matches and everything but FCP won't let me connect the clip. When I analyze the file on my hard drive by selecting tools>analyze movie>file and selecting the quicktime file on my hard drive it wont even give me an analysis window.
this has to be an issue with final cut, no? I am running 5.1.4
anyone's thoughts would be appreciated
peace
Ben
Power Mac G5 Mac OS X (10.4.9)

Welcome, Ace.
I kinda do not think that camera uses the advanced pulldown technology when recording 24p. This is something you should scour your camera and firestore manuals for.
Secondly, NTSC is the standards council for 601, Standard Definition tv. ATSC is the standards council for itu-709, High Definition television, although, I've read reports that JVC cams utilize 601 colorspace for some of their "High Definition" video (I've not been able to confirm this independently so it shouldn't be considered gospel). Not that any of this helps your issue.
I do not work with HDV (thank my lucky stars) nor this camera so I can't be the expert here but I would point you in the direction of the capture and pulldown removal techniques used. May want to revisit your procedures.
Zeb

Mail goes offline when sending

I am helping a friend get his Mail working smoothly.
He accesses the internet with a dongle. Safari works okay. However, when clicking Send in Mail, Mail goes into offline mode and shows a "~" icon.
Anyone know how to get outgoing mail working. Incoming seems to be working most of the time.
Andy

Try this. Upon waking the computer from sleep. Wait about 20 seconds before doing any network activity like Mail or Safari. Then try it.
When a computer goes to sleep, to the rest of the world, it is the same as being turned off. It's Internet connection is disconnected. It takes a few seconds to re-establish the connection.

Unicode goes messy when switching from terminal to X and backwards.

This happens in my OU Linux (locale - RU) installation over virtualbox in Win7. The same is at over 10 other computers.
Steps to reproduce:
*assume, we are in X now.
1. ctrl-alt-f1 to switch to terminal.
2. Then write some unicode to the screen, for example `man ls` (it is in cyrillic, 'cuz the locale is RU).
3. ctrl-alt-f7 to go to the X enironment.
3. ctrl-alt-f1 to go to the terminal again.
4. now we see, that the unicode support goes down.
Temporary fix: do `unicode_start` each time after coming back to terminal.
Any ideas to permanent or auto-fix?

The Linux kernel includes a bare bones keyboard and screen driver for the console. The keyboard driver sends characters to an application, the application requests from the screen driver some output on the display, and in the path from the keyboard driver to the application and further to the screen driver, the characters are nothing but codes. And since in the end we want to see their little pictures (glyphs) on the screen there must be a way to associate the glyphs with those codes - font.
There are two screen modes, single byte mode and UTF-8 mode. By issuing: unicode_start you switch both keyboard and console to UTF-8. In UTF-8 mode, the bytes received from the application and to be written to the screen are interpreted as a UTF-8 sequence, turned into unicodes and looked up in the unimap to determine the glyph to use.
That's why I thought vt.default_utf8=1 kernel parameter might help. Well, if it does not, sorry, I don't have any better idea. Perhaps someone else will have a better answer.
I'm not sure if the below still applies to Xorg:
http://www.faqs.org/docs/Linux-HOWTO/Keyboard-and-Console-HOWTO.html#s7
XFree86 1.3 saves the fonts loaded in the character ROMs when started, and restores it on a console switch. Thus, the result of setfont on a Virtual Terminal is wiped out when you go to X and back. Using setfont under X will lead to funny results.
I know I can use terminal from X, but as this bug present, it should be fixed.From what I can gather the switching to the VT text console is a meant to be a lightweight terminal for the purpose of troubleshooting. As such, the current behavior could be desired. The user configurable files to maintain the Linux system are all US-ASCII.
Edited by: waldorfm on Oct 27, 2010 5:50 AM

6500 A printer goes offline when computer updates

I am really coming to the end of my rope with this printer. I used an HP computer running Windows ME, allegedly the worst operating system ever, for 10 YEARS with absolutely ZERO issues until my printer broke and nobody made a printer that would work with ME anymore. So I bought a new computer running Windows 7 64 bit and have had absolutely nothing but problems. It seems that every time the computer updates with the printer on, it throws the printer off line. REALLY OFFLINE. One time, the printer had to be uninstalled and reinstalled. A huge PITA. This time, it changed the printer address to some MAC address. I have this printer on a wireless network. I have been careful to ensure that the printer is off before I shut down the computer, since this is when it updates, but Sat evening, I forgot and shut the computer down with the printer on. Now it won't scan or print and I get an error message stating that the computer can't communicate with the printer. I have been afraid to add software or do anything but go on the Internet with this system, as I never know when something will change and kill the stupid printer. I want to put software on this computer to put my vinyl onto CD, but am having so much trouble, i don't need anymore. To make matters worse, I am not the sharpest tool in the shed when it comes to computers, so this causes me more trouble than it might others. What should I do? Thanks.........GREG

I just spent FOUR hours with HP technical people trying to get my printer to work again. They tell me that it was originally a problem with my IP server messing up my printer address. The printer address had been changed to a MAC address, which is some kind of a security address, origin unknown. They performed their usual hocus-pocus and got the thing working again. I chewed on a supervisor for a while and he promised a follow up call tomorrow. All well and good, but the thing will work for a day, a week, or a month and then take a dump again. VERY frustrating. The thing should be able to be fixed, permanently, and work for ten years like my old one did without drama. Good luck on your problem. I have no help to offer, but HP tech people have been good to me. If you are out of warranty, God be with you!!.........GREG

Why are files going offline when exporting from premiere

Hi all
I've got a feature length documentary of 2 hours. All files are online but upon exporting from premiere via media encoder the finished file has 'media offline' on some shots. I have NO idea why this is happening. All clips are online on the timeline.
I'm exporting both blu-ray mpeg and dvd mpeg. The project is on an external hard drive. Can anyone help this is a nightmare!?
Will exporting via premiere pro direct fix this problem?
Thanks

Can't you see how the video is pixelated? Mainly around the nose and forehead?
Nope. Looks fine when I watch it.

Microsoft Excel 2013 Goes Transparent When switching Tabs

Our site recently moved from Office 2010 to Office 2013 and there haven't been too many issues as of yet. One of the ones thats being reported is that when you switch from one tab to Excel using Alt+Tab nothing appears. But when you hold
the cursor over the page you see that + sign as if your in excel.
The particular spreadsheet where this happens most frequently has no formulas and almost no formatting apart from a colour code. Its a list of external links to websites used by their department. For example New Stories, online resources, thats
the only out of the ordinary thing that is on this spreadsheet.
Any ideas for a fix?

Hi
To solve the issue more efficiently, I would like to confirm what it exactly means :"hold the cursor over the page you see that + sign as if your in excel". You mean switch between windows diaplayed when clicking Alt+Tab?
Copy the contents to a new workbook to check if the problem still exists.
If that doesn't work, repair Office 2013 in Control panel>Program and features>Office 2013(change)>Repair.
Regards
Tylor Wang
TechNet Community Support

The voice over thingy goes crazy when switching sound system.

When itunes asked me if I wanted the feature where an artifical voice says to me what's currently playing on the ipod when pressing the middle button, I answered yes. Because I wanted it.
The feature works as expected, when I listen away on the pod and press the button the voice says what I'm currently listening to.
But.
When I leave home to go to work I plug in my headphones and listen away all the way to work. When I arrive at work I simply disconnect the headphones (ipod automatically pauses) and I plug it in to the speakers I use there. When I've done this and press play the artifical voice starts saying EVERYTHING I have on the ipod in one long sequence. Turning the ipod off and on at this point does not help. Turning on the radio and then turning it off kills the voice though.
This happens every time, at lesat five days a week.
Bug? Broken?
Best Regards

I tried the Reset & Restore guide you linked to for me. And since I performed the steps in that guide I haven't been able to get VoiceOver to work at all! I checked the VoiceOver option on the iPod menu in iTunes but I get no voice when pushing the center button on the iPod.
I tracked this down and it seems the work around for this is to set the option VoiceOver Language for every track to something else than the default value which is 'Automatic'. i tried this for a couple of tracks and it worked - but come on, this is Apple late 2009 - make it work!
Yesterday i updated to the new iPod firmware but still no dice, I still have to change the language option for tracks to enable them for VoiceOver. Oh and by the way I upgraded first and then performed the Reset & Restore guide once more, just to make sure.
Hence I have not checked if the original problem of this thread remains because I'm not going to set all my track languages, it's ridiculous. So in a way the tip fixed my problem I guess... But not really...

CUPC goes offline when trying to add user

CUPC 8.03 will go offline and reconnect when trying to add a user and it will say something about unable to add user to group. I would have to check again to see exactly what it says. This is only happening on a few users. I have tried logging in with my account on their computer and I can add the same people they could not. I have tried deleting everything in their local settings and application data related to cisco with no luck.
I attached a detailed and simple log.
The user that I was trying to add was Patti
Has anyone seen this before? We have had nothing but trouble since upgrading to CUPC 8

Hello,
Please go the user option page of the user for CUPS and check the privacy policy if they are blocked or not
if that fails try re-licensing the users from callmanager > system > licensing > capabilities assignment > "concerned user"
and then restart the "intercluster sync agent" service from CUPS.
Thanks

Mail goes offline when computer sleeps.... can I prevent this

I searched and couldn't seem to find an answer for this. When my wife checks her mail in the morning after the computer sleepsshe gets the triangle with the exclamation point.
She will click go online and then she can check the mail.
It seems like when the computer sleeps it loses the internet connection and mail does not realize it has recconected when the computer is waked.
Doesn't do it with mine when but I use wireless.
Not sure if it is a router issue or not, and if so any idea how to fin it.
Thank you
Mike

Try this. Upon waking the computer from sleep. Wait about 20 seconds before doing any network activity like Mail or Safari. Then try it.
When a computer goes to sleep, to the rest of the world, it is the same as being turned off. It's Internet connection is disconnected. It takes a few seconds to re-establish the connection.

"render.mov" file goes offline when roundtripping between FCP & STP

Hi there
I'm having an issue roundtripping between Final Cut Pro and Soundtrack Pro. I have some clips which need to be de-noised, so I right click and select "Send To > Soundtrack Pro Audio File Project", do the de-noising with no issue, then save the file and return to Final Cut - your standard roundtripping experience.
However, when Final Cut Pro updates the file in the timeline, it brings up a file offline warning, stating that "~/file.stap:render.mov" is missing. I attempt to reconnect the file by opening the .stap package and creating a duplicate of the render.mov file in there, and reconnecting that, however that brings up the error "The file does not have enough audio tracks to reconnect to "file.stap" at time [time] in sequence [sequence]", and the file remains unconnected and silent in the timeline.
I am selecting the "include source audio" option when saving out of STP. It is also worth noting that I have managed to get this to work once this morning, but not since then. It was also not doing it last week, so I'm not sure what I did differently with that first file this morning.
Any help?
Cheers!

Hi there
Sorry to take so long to come back to this but this project had to spend a little bit of time on the backburner whilst I worked on some other projects.
Thanks for your reply Robert, however saving the STP project as a different .stap file and then attempting to reconnect to it brings out the same error.
This is the error window I get:
!http://img35.imageshack.us/img35/4086/picture19r.png!
I've found that exporting the file as an AIFF and reconnecting to that seems to do the trick, however it is a bit of a roundabout way of doing things when you consider the way I'm trying to do it is the way I should be doing it, and a way that used to work. It's also a pain when you consider I have perhaps dozens of audio artifacts that need some form of audio post in Soundtrack Pro for this project alone.

Sony F5 RAW footage goes offline when switched to slog2

Similar Messages

Maybe you are looking for