Sony GV-HD700 Output problems

I've been trying to Print to Video for days now. Does anyone have a definitive answer on this mystery? I can successfully capture material in both DV and HDV, though in HDV the frame size of my clips is still 720x480 even though I set it up for 1440x1080 in the presets, but I can't Print to Video in either of the formats.
My deck settings are....
HDV/DV SEL: HDV
DV Rec Mode: SP
Component: 1080i/480i
i.LINK Conv: On
TV Type: 4:3
A/V to DV Out: On
My FCP Audio / Video Settings are....
Seq. Preset: HDV-1080i60
Capture Preset: HDV
Device Control Preset: Sony HDV FireWire
Video Playback: None ( but I can change without affecting ability to capture. )
Audio Playback: Default ( but I can change without affecting ability to capture. )
Under A/V Devices tab I have selected.....
Different Output for Edit to Tape/Print to Video
Video: HDV (1440x1080) 60i
Audio: HDV
After trying several other combinations the system seems to take control of the deck, rolls tape, transcodes or conforms to HDV, transfers to deck or camera, but nothing actually records on the tape.
Can anyone help?
Thanks,
Boxcar

Her's a link to B & H website which has the sony gv-hd700 http://www.bhphotovideo.com/bnh/controller/home?O=&sku=516841&Q=&is=REG&A=details
I'll check for the suggestion you mentioned. thanks. menu setting (again) and for a pal or ntsc-pal switch. I'll keep you posted.
Thanks,
Mel

Similar Messages

Sony GV-HD700 issue

I'm having issues with FCP using the Sony GV-HD700 for video playback. I cannot get it to run as an HD playback device. DV seems to work ok, but the options for HDV are all grayed out.
My sequence preset is: HDV-1080i60
Capture preset is: HDV
Device Control Preset is: Sony HDV firewire
I'm trying to use a firewire connection. On the deck itself my settings look correct.
I've set the HDV/DV Sel to HDV. My i.link conv. is turned off, and my A/V-DV out setting is turned off.
I've tried handfuls of settings and have not had success yet.
Any ideas?

#25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
HDV cannot be played out of FCP via Firewire because it's Long GOP structure is too taxing on your processors to spare the system resources needed to drive an external monitor.
The best option you have is the Matrox MXO...$1000. This coupled with an Apple 23" display gets you color correction quality...but, it isn't compatible with COLOR yet. www.matrox.com
And there are the Decklink Intensity and Intensity PRO cards as well.
You can view HDV out firewire as DV...as stated in page 220 of the manual:
"For example, you can preview a 720p30 HDV sequence via an NTSC DV FireWire device
connected to an external monitor. The output signal is letterboxed and downconverted
to NTSC video. You can also use a third-party interface to view any format supported by
Final Cut Pro—as long as the frame rate of your clip or sequence matches the frame
rate of your current output device."
But I haven't a clue how to get that to work. Manual doesn't say as far as I can tell. THis is for external viewing only...not good for color correction.
Shane

Macbook mini DVI to DVI output problems

hi
I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
sorry for the long winded post, really wanna know what the problem is here

Hi cbeth,
welcome to macbook forum.
For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
Also reset your PRAM and PMU.
Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
Good Luck.

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Delimited output problem at the time of writing in to text file

Hi ,
I am using matrix stayle design for my reports when i am generating reports in delimited format i am getting Delimited output problem(DR.Watson ERROR) at the time of writing in to textfile.

Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11.
Thanks
Oracle Reports Team

Sony GV-HD700 wont capture

No matter what combo of settings I use, I can not get Final Cut to capture HD footage off the Sony GV-HD700 deck. I have tried several coronations of setting on both the deck and FCP 6 and nothing works. Any ideas?

Yes on all three. I have set the capture preset to all the HDV settings I have, and have used the all the HDV firewire control settings, including the sony ones. It will control the deck, but it wont preview and when I hit capture now or set an in and out point, it wont capture. It says that there is no data. I have also unplugged the firewire and changed the iLink settings on the deck. Neither on or off work. I have also changed the HDV settings to Auto and HDV and nothing.
Message was edited by: jediknight36

Premiere Elements 12 output problem

I am having problems outputting my project. Different errors messages. One says transcoding error. Another time it says export error. Other times it crashes. And then the program won't even open.
Any suggestions?
bwatson9

Steve,
First, thank you for your prompt response. This is the first time I have used Premiere Elements 12. I don't seem to have a manual for the software.
The product was bought with my new computer. I am using windows 8.1 (64-bit) with Intel Core i7-4770 CPU @ 3.40GHz. I have 12 GB of installed RAM. I have 1TB hard drive of which this is the first project I done.
I have checked to make sure that I am getting all Windows and Microsoft Updates. I even manually went to Windows Update and installed the optional updates.
The project is a 20 min. video using mostly photos and 2 small video clips. The project is saved in its own folder.
When I go to the timeline in Expert view I do see an orange-yellow line above the timeline. It runs the whole length of the project.
I understand from reading the FAQ's that each photo cannot be larger than 1000 x 750 pixels. I will check that and reduce their size. Is there anything else that I need to do?
Where can I find a manual?
Thanks,
bwatson9
Date: Sun, 23 Mar 2014 06:31:03 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Elements 12 output problem
    Re: Premiere Elements 12 output problem
    created by Steve Grisetti in Premiere Elements - View the full discussion
A lot depends on a lot.
What operating system are you using? What processor do you have and how much RAM and how much free space is on your hard drive?
How long is your project? What model of camcorder is your video coming from and what format and resolution is it?
Have you ensured that your project file is saved to its own folder, with no other project files in this folder?
When you add your video to your timeline in Expert view, do you see a yellow-orange line above the clips, along the top of the timeline? This indicates a mismatch between project settings and video specs.
If you are on a Windows computer, have you set up your computer to get both Windows and Microsoft Updates -- and have you manually gone to Windows Update and ensured you have even the optional updates that don't install automatically?
When did you last run Disk Cleanup and Disk Defragmenter?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6234402#6234402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6234402#6234402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6234402#6234402. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Sony GV-HD700 HDV Video Walkman VCR to MacBookPro with FinalCut

I've been using my HDV camera as a playback device to get 720p30 HDV captured into FinalCutPro 6. The firewire from the camera to the Mac works fine. Will the
Sony GV-HD700 HDV Video Walkman VCR allow me to capture 720p30 HDV from tape to Final Cut via firewire? If not firewire, what kind of cabling do I need to get pictures and sound into FCP from the GV-HD700 deck?
Thanks!

The specs listed on B & H note that one cannot transfer HDV720p/30 via firewire, but the comments on the same site regarding the recorder in question seem to rebut this. I've since read a suggestion about defeating the down-convert option on the deck, so that FCP, which is expecting to capture HDV based on my capture settings, will recognize what's coming through the firewire. I'm wondering if I'll be able to control the deck through the capture window, or just start tape and capture now. Thoughts? Thanks very much!

Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

Please read this: Adobe Lightroom - Find moved or missing files and folders
You do not want to be in the Import section of Lightroom, you want to be in the Library Module. You don't want "Update Folder Location", you want to ctrl-click on a Folder name (not in Import, but in the Library Module Folder Panel) and select "Find Missing Folder"
You do not want to re-import photos that have already been imported, this is almost always a bad thing to do.

Graphic output problems in most programs - triangles ...

- often at scrolling in the Finder
- it appears spontaniously and dissappers/flicker if mouse is moving ...
- in some programs it is permanent for example 3D Coat
- different often and strong in different programs - in some there is no problem (5% - for example ZBrush)
- Mountain Lion does not fix it - only some changes - for example Quicktime (not Fullscreen) a big triangle in the down left
- little greeen/red pionts, like defect Pixels, in little groups are appearing too! - Photoshop, Final Cut Video Output...

A screenshot give you a copy of what is actually sitting in the screen buffer.
So this is not an "output" problem. That stuff has been messed up in the screen buffer.
to draw the mouse cursor, the area around the pointer must be re-constructed. That is why moving the mouse cursor seems to "repair" it.

Print Output problem in ECC6

Hi Friends,
I am getting print output problem in ECC6.
In VF03 I am giving issue output for invoice printing. Whenever I am presseing issue output one screen is coming for selecting output type. I have selected one output type and I pressed print preview then in print preview one item and corresponding amounts it is showing properly for the first time. But the problem is after the print preview if I come back and again if i press print preview button values are not getting refreshed and same item is repeated for twice and the amounts are also getting added. Again for the third time if i come back and again if i press print preview one more item is getting repeated and the amounts are also getting added which should not suppose to happen.
What could be the problem and how to resolve it?
Rewarded,
Steve

Hi,
clear those variables in the program .
Regards,
Bharat.
Reward points if helpful

J Option Pane Output Problem

Hi guys,
I am new to Java and I am having trouble compiling this program via which I can calculate the number of months to pay off a loan.
I am not sure why it is not compiling and would really appreciate some solutions or suggestions
Thanks a lot.
import javax.swing.JOptionPane;
public class Final
public static void main(String[] args)
String LoanAmount;
String Months;
String AnnualInterestRate;
String MonthlyPayments;
double balance;
double interest;
double payment;
int months=1;
LoanAmount=JOptionPane.showInputDialog("Enter Loan Amount:");
AnnualInterestRate=JOptionPane.showInputDialog("Enter Interest Rate:");
MonthlyPayments=JOptionPane.showInputDialog("Monthly Payments:");
balance=Double.parseDouble(LoanAmount);
interest=Double.parseDouble(AnnualInterestRate);
payment=Double.parseDouble(MonthlyPayments);
months=Integer.parseInt(Months);
while (balance>0)
{balance=(balance+(interest/12)*(balance))-payment;
months=months+1;
JOptionPane.showMessageDialog(null, "Number of Months ", +months);
Edited by: Java1001 on Sep 15, 2009 11:45 PM

A: J Option Pane Output Problem

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
You are passing 3 parameters -- a null, a String and an int -- to the JOptionPane#showMessageDialog method. In the [_API_|http://java.sun.com/javase/6/docs/api/javax/swing/JOptionPane.html], do you find a variant of this method that accepts these three parameters?
db

Sony Charger with output: 5.0VDC 850mA and serves on the Xperia Z1?

I have a Sony Ericsson Type CAA-0002016-BR with output: 5.0VDC 850mA and. Wonder if this charger is compatible with the Xperia Z1, once your charger has 1500mA output 5.0VDC and.
Thank you.

Well,there should not be any problems.However,it is recommended to use the chargers that come with the phone.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

DVI output problem

Hello,
I have a 1.83Ghz Core 2 Duo Mini that will not output any video over DVI.
I have connected the Mini via DVI to three known-good monitors (Apple 20in Cinema Display, Gateway 22in HD LCD, and an Acer 22in LCD) and can't get any video output. I get a startup chime, drive noise and a power light, but no video.
I have attempted to start the Mini in safe mode while connected to the Cinema Display but still can't get any video. I've reset the PRAM and PMU and that didn't help.
The Mini will display video using the Apple-supplied DVI-to-VGA adapter when connected to the Acer and Gateway displays.
When I took the Mini to the authorized service center, they said they couldn't replicate the problem. So I'm a bit stumped. Has anyone here had similar problems and/or solutions?
Thanks in advance for any advice you can offer.

I once had a similar problem. For testing I did not bother to screw in the retaining screws on the plug into the monitor. Could hve kicked myself when, after screwing them in, it worked fine.

Mini-DVI TV Output Problem

I recently purchased the Mini-DVI to Video Adapter for my Macbook at an 'authorized' Mac reseller here in Seoul, South Korea (we also use NTSC here). When I got home I turned off my mac, hooked everything up, turned on the TV and then turned on the Mac, and then clicked 'Detect Displays'.
But the Mac doesn't correctly detect the TV. In the display menu it gives me display resolutions as if the TV were a seperate monitor (like 1600x1200, 60mhz, millions of colors). I tried every resolution option and the one that works best (and that it sets to after clicking 'Detect Displays') on the TV displays six small, black and white, distorted images of the screen scrolling vertically. Other resolutions do not display as well as that.
The TV itself is fine, I can hook other things into the composite inputs with no problem. For some reason the Macbook just won't output a signal my TV will understand. Is there a way to manually tell it what resolution to output? Did I just buy a faulty adapter? Would the composite cord itself make any difference?
Please help! Thanks.

One last try to get some help...
Can someone tell me what Resolution options are available in the Display menu when the Macbook correctly detects a TV? Does it just say PAL / NTSC with overscan options? Thanks.

Sony GV-HD700 Output problems

Similar Messages

Maybe you are looking for