Sony handycam support

Couple of questions:
I am thinking of buying a new camera and was looking at the Sony HDR-XR200V but before I do I need to make sure it's compatible with FCE. Anyone know? (Or have any feedback about this particular camera?)
Secondly, according to this document:
http://support.apple.com/kb/HT2948
the XR200V isn't on the list. But I also noticed that a good number of these cameras have been discontinued by their manufacturers. So, is there an updated camcorder support list from Apple that I can't seem to find? Or is this all we've got?
Thanks

The list doesn't get updated often. So if you canout what format this camera works in you'll have a better idea of whether it will work with FCE. If it conforms to the AVCHD spec it will probably work with FCE.

Similar Messages

Is Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

Is the Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

happyherbert
I cannot give any guarantee as to whether you can make a USB connection between camcorder and computer/Premiere Elements 10 Get Media/"Flip, AVCHD, Cameras, Phones or Removal Drive"/Video Importer but it might work.
But worst case, which is not so bad, is transferring the AVCHD files to the computer hard drive and then importing the files into a Premiere Elements 10 project with the program's Get Media/Files and Folders.
If you have Full 1080i30, then the project preset that you would set before you import the files would be
NTSC
AVCHD
Full HD 1080i30
We can discuss more about settings when you have more details.
You are at a disadvantage with Premiere Elements 10 on Windows Vista (32 or 64 bit). In that arrangement, Premiere Elements 10 is a 32 bit application with the limitations of 32 bit system. AVCHD is a rather resource demanding format. If Premiere Elements 10 were on specifically Windows 7, 8, or 8.1 64 bit, then it would be a 64 bit application that could take advantage of the 64 bit resources. All that would translate into getting a larger project taken to successful completion with a greater frequency.
Please review and then we can go further into the details and then decide what next.
Thanks.
ATR

Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

Can the sony handycam dcr-hc30 support more than the original 512mb memory? Thanks.

According to this compatibility chart: http://esupport.sony.com/perl/support-info.pl?&info_id=11 the DCR-HC30 can use the following cards:Memory Stick Duo Pro - 1 GB, 2 GB, and 4GBMark 2 Memory Stick Duo Pro - 1 GB, 2 GB, and 4GB.You might want to read the chart to make sure I was reading it correctly.

My mac doesn't support pmb software for sony handycam what should i do?

my mac doesn't support pmb software for sony handycam what should i do?

Provide the model number please. And eww-PMB stands for "Picture Motion Browser"

Windows Movie Maker - unable to capture from sony handycam

I am using Sony Handycam DCR-HC2 camcoder and my laptop is sony vaio vgn-nr160e. Before upgrading to windows 7, I was able to capture home made movie with Click to DVD program via i-link cable with vista home.
From the time I update to Windows 7, I am unable to capture home movies. Presently I am using windows movie maker 2.6. When I connect my handycam to laptop with i-link, it won't reconize.
Please some one guide me, we are planning a 2 week vacation and I am going crazy with this issued ( I am an avg tech guy, not a expt)

I have
Windows 7 RC
Sony handycam DCR-TRV19
Sony iLink cable
Full Windows Live package installed
and have had similar results.
With the Sony cable (verses a 4 pin to 4 pin cable) I do get DV IN on the camera when I connect.
But in device manager it does not show up under IEEE or as an Image Device :-(
That's as far as I have gotten. Hoping someone can find the little nugget to get this going.
Hi
Here are a couple of links that may help.
Sony eSupport - Digital Camcorders
Sony eSupport - DCR-TRV19 - Support
Hope this helps.
Thank You for testing Windows 7
Ronnie Vernon MVP

My ipad does not appear in itunes. I am OS 10.6, itunes is up to date, I have restarted computer and ipad and switched usb sockets. Dont know if its related, but I can no longer see my sony handycam in imovies too.

My brand new iPad 2 does not appear in iTunes. I am OS 10.6, iTunes is up to date, I have restarted computer and iPad and switched usb sockets. Don't know if its related, but I can no longer see my Sony Handycam in iMovies too.

What content are you wanting to copy of the iPad ? You should be able to copy off anything that you've purchased from Apple (films, music, ibooks, apps etc) by connecting the iPad to your computer's iTunes and doing File > Transfer Purchases. If you want to copy off music copied from your own CDs or purchased from other sites then you will need to find a program for your computer that can copy them off – iTunes won't copy them off.
For photos taken with the iPad, copied to it via the camera connection kit or saved from emails/websites then you should be able to copy them off via the Windows camera wizard.
For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
Content in third-party apps (documents and files etc) then how you copy that content off will depend upon what the apps that they are in support e.g.either via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

How do I get the Movies off my new Sony Handycam using iMovie?

WOW! I didn’t think that this would be such an issue!
So, I purchase a new Sony Handycam DCR-SR42 with a 30 GB
Hard Drive in it. I ask the sales person “Is this camera compatible
with my G5 Mac?” He says, it sure is! I take it home record the kids
around the house, and my daughter’s ballet recidal. COOL!
Then I go and try and downlaod the movies to my Mac. I come to
find out that the 2 cds that came with the camera are pretty worthless!
Sony states in one of the bullet points in the instruction manuel
that the software on the cd will not work on a Macintosh computer.
So, I figured, NO big deal, I will be using iMovie! Unfortunately
iMovie does not recognize the camera when I hook it up, because
it can only hook up using a USB connection. It doesn’t even offer
a Firewire connection, and iMovie ONLY recognizes Firewire.
I then find on one of the cds, a PDF of the Handycam Handbook.
It states in the PDF, that Mac users need to open the disk icon
on the desk top for the camera, and copy the files from the camera
to my hard drive. So I follow the steps and do this. Then I go to
open one of the files using Qucktime, and I get an error message
stating that Quicktime cannot open the file because it could not
parse it -2048!?!?!
Next, I go to the Apple web site to see if I can find anything to
resolve all this. I find an article “iMovie does not work with muxed
MPEG-1 and MPEG-2 clips” In the article it states that if the files
are MPEG2 Muxed files, iMovie can not support them!
I come to find out that the files are MPEG2 Muxed files. It seems
that the newer camcorders are using this format, because the files
are heavily compressed to allow the camera to cram more data
on the hard disk. The problem is you need some kind of software
to decompress these files in order to use them, and Sony doesn’t
include it for the Mac!
After more research I find - QuickTime MPEG-2 Playback on the
Apple web site. I purchase it for $19.99 from the site hoping this
will be the answer. Nope! It allowed me to open the movies in
QuickTime, and copy them into iMovie but they are only the
video portion. They have NO audio!
Anyone else run into this whole pile of BS?!?!!? If so, were you
able to figure out a work around? Or, are you stuck with a cool
camera full of movies, with NO way of getting them off with
sound? Well. unless you find someone with a PC that has
a DVD burner in it! Man, that thought scares the ---- out of me!
°Jeff Camp
camper
G5 Mac OS X (10.3.9)

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

Sony Handycam DCR-HC26 not recognized by iMovie'08

System: iMac PPC G5, 2GB DDR SRAM, running 10.5.8
iMovie: '80 7.1.4 (585)
Camera: Sony Handycam DCR-HC2, plugged in (battery in too), in Play/Edit mode (not record mode)
Firewire: 4-6pin, tried 2 cables.
Alert message: "No camera connected. To import video please connect a camera."
Camera on/Firewire in before starting iMovie; also tried restarting with Firewire already attached, no joy.
I DID successfully import video from this camera to another mac about two years ago -- it wouldn't recognize it at first, but I bought a new cable and that took care of it. This time I used the "old" (new last time; gold connections) AND bought a new one. Nothing doing.
Anyone have any help to offer? If I have the time I'll try to dust off the (home) machine that I used a few years ago (not sure which iMovie that was) and see if that works...
Thanks in advance!

Hej Sixten
May be You find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Sony Handycam DVD-R 60 Min 2.8 GB DVD

Will a Mac play back video from a Sony Handycam DVD-R? 60 Min - 2.8 GB DVD? Will the mini DVD work in the HL-DT-ST DVD -RW GH41N Atapi DVD drive of a Mac Pro without getting stuck?
Thanks,

Will a Mac play back video from a Sony Handycam DVD-R? 60 Min - 2.8 GB DVD?
If the Mac supports that format. If it's a standard video DVD except for its physical dimensions, yes.
Will the mini DVD work in the HL-DT-ST DVD -RW GH41N Atapi DVD drive of a Mac Pro without getting stuck?
Mini disks can be inserted into a drive with a carrier tray safely. If put into a slot-loading drive, they may get stuck.
(52373)

TS3391 I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Mac OS9 Driver for Sony Handycam DVD-DCR100

I recently purchased an iMAC and want to start making movies with my Sony Handycam (USB device, no firewire). The apple support team directed me to the Sony support site to get a driver. Sony wanted me to pay for the driver and did not indicate if the driver was for Mac OS or not. I'm stuck. If anyone has any ideas or suggestions, I would appreciate it.

I purchased a Sony Handycam Camcorder (DCR-SR82) and have a MacBook. I had recorded several videos and was anxious to transfer them on to my computer and then burn DVDs. I opened the camera box to find that the software provided with the Sony Handycam is for PCs only---there is no Mac installation disk. So, I began doing research and with some major help from a Mac genius, was able to get it all ironed out. My mission is to spread the word so that no one feels the need to return their Sony Handycam just because they are Mac owners! The first step is to make sure that the processor on your Mac is Intel, as I believe that is one of the requirements for all of this to work. Second is to buy iLife '08, which is around $80. Next, you can import your videos into iMovie without any difficulty and enjoy all of the editing features that iMovie provides. Once you have imported your movies, you can open iDVD and burn DVDs without difficulty. If you have an external DVD burner, which I do, you need to download one program which is free and is called Patchburn. This program will enable iDVD to recognize an external DVD burner. Then, you are all set to enjoy your Sony Handycam + all of the joy of editing movies with your Mac. Have fun!

Sony handycam video camera upload trouble

I recently got a sony handycam, but mac doesn't support the program it comes with to upload videos, does anyone know what I can do so I can upload my videos onto my macbook pro?

You do not need the cams software to transfer your files. If your cam did not come w/USB connecting cables (read your user manual), then what I suggested previously will work.

Sony Handycam Mpeg2 won't work on Mac

Hello
I am hoping you can help me as I recently upgraded to Lion and I can't get my videos from my camcorder to work on my Mac. I have a Sony Handycam DCR-SR100 and before the upgrade (when I had Snow Leopard) I was able to import my vidoes (I think they are mpeg 2) to iMovie and have them look and sound just fine.
But I had issues with my laptop overheating (unrealted to my camera) so the Apple store wiped my laptop clean. When I got it back I upgraded to Lion and slowly put my system back together. I just tried to use iMovie to view my vidoes on my laptop (from the camera). I can see them but I can't hear them (there is no audio).
Quicktime won't even recognize them. It's telling me that the files are not supported.
I am running OS 10.7.4 and Quicktime player 10.1
Any help you can provide would be wonderful! I really want to be able to see AND hear my videos on my Mac and I can't for the life of me figure out how to do it!
Thanks
Alison

Sorry, I should have checked before I answered. Apple lists these camcorders as compatible with imovie...
I don't know why your camcorder no longer works.
Hugh

HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
Thanks

Hi,
Did you solved this problem?
I have the same situation here...
Regards

Problems importing Sony Handycam mpg files into Premier Pro CS4

I'm investigating Premier Pro CS4 for video editing and if I can make it work okay then I will purchase the Master Collection. Otherwise I may go to the MAC and use Final Cut. I need immediately to edit files downloaded from a Sony HandyCam that come off in an mpg format I believe it is (MPEG-2). My understanding is that the Premier Pro supports the importing of mpg files.
When I attempt to import one of theses mpg files I get the error, "Unsupported file format or damaged file." I know the files are okay because I can play them with Windows Media Player and have been able to edit them with Window Movie Maker. Now I need a more robust editing environment and am looking at Premier Pro to be the solutions.
Has anyone had experience with importing mpg files? Is there a Codec needed? If so where can I get it and how do I install it?

Adobe wouldn't help me on the phone, as I haven't got a support contract. Perfectly rational by them, just stupid.
I've asked my software supplier to forward on some questions and a link to this thread to Adobe support and they should be looking at it soon.
Also, there is another possible solution that might help those of you with full versions.
There is some advice here on one way to give Premiere Pro the ability to import MPEGs.
http://www.mediacollege.com/adobe/premiere/pro/import/mpeg-ac3.html
This is very attractive to me - as I know the AC3 audio codec is used by my MPEG files and it sounds like it could be a solution. Of course, I've tried it, and I still get the same error.
I ran the files through TSRemux and got the same 'file format not supported' error message.
I've also been trying to import a .mov file into the trial version and I get the same error. Jim, would you be able to help me by saying in which other ways the trial version is limited?

Sony handycam support

Similar Messages

Maybe you are looking for