Sony HD Camera as capturing device

I am trying to capture an mini HDV tape by using my Sony A1 to play out onto final cut pro. However, final cut is not recognizing the A1 as a capturing device. A friend of mine suggested to change the Audio/Video settings in final cut, but that still hasn't worked and they don't seem to stay set anyway.
I am new to using Final Cut (former AVID user) and am still unsure about the various settings. I will be fine with final cut's interface, I just need the capturing tool to work! I would really appreciate someone's help. x

1st, have the camera powered "on" BEFORE you launch FCP. then choose an "easy setup" to match how you recorded to tape on the A1; ie: HDV-1080i60 Firewire Basic. this is what I use for my FX1. I would guess it is the same for your A1.
hope this helps,
steve

Similar Messages

  • Intermittant problems recognizing my Sony video camera when capturing

    When filming live, I have an intermittant problem with PPro 6 recognizing my Sony video camera when capturing.  I hit the G (for start recording) and something it goes live and sometime the capture window goes to digital mess. I am using the "no" device control preference setting as I was told to by the Sony customer care tech.
    Has anyone had a similar problem?

    You might provide more information about your setup... PPro Information FAQ http://forums.adobe.com/message/4200840
    If Windows, are you using the legacy Firewire driver?
    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
    -and Windows http://forums.adobe.com/message/4708997

  • Analog Capture Devices

    Hi
    I have this USB Analog / DV capture device called "USB instant VCD".
    http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=41536 7&Tab=0&NoMapp=0
    I was using it on a pc. Plugged it into the Mac and tried to install drivers from the disk but kept getting "error opening movie"
    but it was an exe file not a movie.
    Im trying to hook up the VCR to the mac to burn sometapes to disk.
    why wont it recognise the device? I thought an exe file should self open when you click it?
    am I missing something?
    best, M/
    G5   Mac OS X (10.4.2)  

    USB transfers data in packets, in bursts of information. For video work, you want the constant stream of Firewire.
    FCP will not work with USB cameras or capture devices. It will work with USB hard drives, but it is not recommended.
    Take up the other matter with ADS. Perhaps there is a Mac version of their software on their website. Either way, it's not going to interface directly with FCP, but maybe you can get the files on your drive and then import into FCP.
    If your question is answered, please mark it as such and award "Helpful" and "Solved" points to those posts which Helped or Solved your problem.

  • I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera.  CS6 c

    I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera.  The CS6 capture box keeps putting up a message that capture device is off line.  The Sony DCR-TRV340 camera is not listed in the CS6 Device Type  list in the CS6 DV/HDV device control settings box of Sony cameras.  I've downloaded what I think are the correct drivers for the TRV340, and when I plug the camera into the computer, the computer shows it listed in the devices and printers box, but CS6 will not recognize it.  Do I need to install these drivers into a specific folder in the CS6 program?  If so, where do I find these drivers in the windows 7 professional operating system, and into which CS6 file folder would I copy them to?

    Most camera's are not listed in Device controle, set it to Sony and generic. Yours is very old its a Digital 8 camera (I still got a TRV210). Johns second link wont work with your camera.
    You do not need to download drivers nor do you need to install anything. Most likely its the Legacy driver.
    Read though this document.
    http://kb2.adobe.com/cps/828/cpsid_82848.html
    General rule is connect camera to pc wait until windows reconigzes the camera.
    Fire up Premiere and capture.
    Never connect the camera to pc when the camera is on.

  • Device online, but cannot control camera from Capture screen

    I have a the camcorder listed below connected to my computer through a firewire card (also listed below), and I'm trying to capture video from tape with Premiere Pro CS4.  The camera is online, and if I use the controls on the camera player to play the tape, the video shows in the capture preview, but I cannot control the camera from the capture screen.
    Device Control is set to DV/HDV, and set device to Samsung.
    Any idea what's going on here?
    Operating System: Windows XP Professional
    Sound card / driver version: SoundMax Integrated Digital Audio driver:5.12.1.5246
    Video capture card / driver: Texas instruments OHCI compliant IEEE 1394 firewire card, driver:5.1.2535.0
    Camcorder: Samsung SC-D363 miniDV, driver:5.1.2600.0
    - Amanda, Carolina Tiger Rescue

    Yes, the record button is live, just the controls to control the tape deck in the camera are greyed out.
    I have since borrowed a Sony DCR-HC42 to capture from, and the controls are working for it.  However, it will not capture by setting In Points and Out Points,  I just have to position the tape as best as possible, record and select when to stop the recording stop from the Preview.  It's not ideal, but it's getting the job done.
    This sort of problem seems to be par for the course when using Premiere on a pc. Users just have to plan on a few days to resolve compatability issues that should not have existed.
    so for the moment, no critical issues, but once this project is done I will need to revisit the problem.
    thanks for the help!  Amanda

  • Importing problems (hi 8 camera-capture device-imovie)

    i am importing from an old canon es3000 hi-8 (analog) camera, through a miglia "director's cut" capture device, to imovie (via firewire) ... there is fragmented line at the bottom of the frame in imovie during import. will that show up in idvd later? also, the imovie is not seperating the clips, so i end up with one long clip. after about 10 minutes the digital footage in imovie becomes fragmented throughout the frame. does anybody know why this is happening? thanks in advance, R.B.
    Mac G5   Mac OS X (10.4.7)  

    see the other post
    Don't double post Your questions but address right forum.
    Yours Bengt W

  • Camera not working (No video capture devices were found)

    Hi,
    Macbook air late 2010 upgraded to 10.9.2 camera not detected, it was working 2 minutes before upgrade.
    system info states - No video capture devices were found.
    I have re-installed 10.9.2 clean using cmd-r on startup,
    repaired permissions,
    reset SMC
    still getting - No video capture devices were found.
    anyone got any advice,
    Thanks,
    Charles

    Hi,
    Ok switched my Macair on to re-install 10.9.1, thought I'd give facetime one last try and its working
    So the way I fixed it was to uninstall all 3rd party video driver (like airparrot).
    This did not fix problem, booted up holding the Command-R keys.
    Re-installed Maverick
    Restarted
    Camera was still not working
    Downloaded latest Skype
    Ran Skype - no camera detected in preferences
    Repaired permissions using Disk Utility
    Left it on for few hours
    Restarted next morning, opened Facetime, now everything is working
    Charles

  • JMF Registry Capture Device register a mobile camera(Problem or Impossible)

    Hi all
    I have found some softwares that allows us using mobile phone camera as a web cam and use with skype, yahoo messenger etc... Those allows us use them as wireless web cameras and medium is bluetooth or wifi. So I am wondering whether they can register with JMF capture device registry and using for our java applications?
    Supporting for wireless capability is important if they can registered. Otherwise we have to go for an expensive IP cameraWhat I want to point out is they detect as registered web cameras in skype and yahoo messenger but not with JMF.
    This is the software which I have tried
    [http://www.wwigo.com/home.php]
    Can anyone please answer?
    Edited by: deshan on May 3, 2009 3:33 PM

    JMF will only work with web cameras that are accessible through the DirectShow or VFW interfaces. If the way you're accessing them isn't available through one of those two APIs, then JMF probably won't be able to use the web cam.
    But, of note, JMF doesn't need a web cam to be registered to use it, it simply needs to know the hardware URL of the web cam. Normally this is something like "vfw://0" for the default camera.
    If you could get a URL like that, and use it as a MediaLocator for your DataSource, then you could possibly use your web cam without having to register it.

  • Problem with video capture device, with a virtual camera

    I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
    "Error connecting input preview RGB filter."
    "Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
    "Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
    "Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
    However, it is good to use AMCap,
    what's the problem with FMLE.
    Looking forward to your replies. Thx!

    Did you ever figure out the problem/solution?
    I am experiencing the same thing with my virtual camera filter when connecting to FME?
    Shawn

  • 5.1.4 update breaks HDV capture? Unable to Initialize Capture Device

    Problem:
    Final Cut Pro cannot capture standard 1080i60 HDV footage from Sony FX1 camcorder. FCP reports "Unable to Initialize Capture Device" when the log and capture window is opened. However, the footage CAN be captured in iMovie (which is interesting, and unacceptable). When HDV>DV downconvert option on camcorder is activated, footage CAN be captured as anamorphic SD, so the camcorder and FW do work.
    The problem is occuring on a rock-solid FCP system that I use on a regular basis (mainly for SD editing). It has been approx 2 weeks since I last attempted a HDV capture, the system has been working great with SD footage (still does).
    Factors that have changed to my knowledge since HDV capture was last functioning properly:
    *Added a new external FW drive into regular usage (a different brand than normally used, no issues with it so far).
    *Updated FCP to 5.1.3, and then 5.1.4 when that fix came out. All SD captures and work have been fine so far.
    Here's what's interesting...I had a copy of the FCP v5.0.4 .app that I had saved an archive of prior to the crossgrade update. Guess what? I can load it up, and it captures HDV without any problems! With that in mind, this looks like an FCP 5.1.4 issue. But I am at a loss on how to proceed further in troubleshooting. Many thanks in advance for any assistance.
    Matt Jeppsen
    FresHDV.com
    ---NOTES---
    What I have tried:
    *Attempted capture with a different Sony FX1 camcorder.
    *Swapped firewire cables and system firewire ports.
    *Attempted capture with camera FW chained to an external HDD.
    *Unplugged all other external firewire devices from the system.
    *Trashed FCP prefs using FCP Rescue 5, created new project using Easy Setup (for HDV).
    *Tried different variations of FCP A/V settings, tried all the HDV FW device control presets and the HDV AIC capture preset.
    *Per instructions at http://docs.info.apple.com/article.html?artnum=301852 I removed the numbered Quicktime pckg Receipts and re-installed the latest version (7.13). Post-install/reboot, I repaired Disk Prefs and Verified the disk using Disk Util.
    *Have also attempted installing QT 7.13 2 and 3 times in a row, also trying disk prefs repair BEFORE the post-install reboot.
    Final Cut Pro Audio/Video Settings:
    Sequence Preset: HDV-1080i60
    Capture Preset: HDV
    Device Control Preset: Sony HDV Firewire
    Sony HDR-FX1 IN/OUT REC settings:
    *VCR HDV/DV: HDV
    *COMPONENT: 1080i/480i
    *i.LINK CONV: OFF
    *TV TYPE: 16:9
    *A/V->DV OUT: OFF
    System/Software Facts:
    *Final Cut Pro 5.1.4
    *Quicktime 7.13
    *PPC Mac G5 2.7 Dual (2.5GB RAM)
    *35GB free on System, 45GB free on internal FCP Scratch disk
    Final Cut Pro 5.1.4, G5 DP 2.7 (PPC) Mac OS X (10.4.8)

    I think I figured out this vexing problem. I too was having the same issue. Check to see that your Quicktime is newer than 7.1.2. If it isn't you'll have to upgrade it. I only upgraded to 7.1.6 here because I was afraid of going to a really new version. http://www.apple.com/support/downloads/quicktime716formac.html. After I upgraded my quicktime, I ran software update and the Final Cut Pro 5.1.4 update appeared. I hoipe this helps.

  • Unable to initialize capture device and device control in HDV

    I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
    I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
    I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
    I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
    Im at my wits end, Ive been working on this for a whole week now.
    Thank you,
    Bugs

    It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
    x
    To do a full quicktime reinstall.
    Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
    Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
    Run the Quicktime installer.
    Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
    Reboot
    If this doesn't work, then the problem lies elsewhere:
    1. your system - user preferences, firewire ports or other system elements.
    2. your equipment - camera/deck/firewire cables.
    3. your process - not setting up the software properly or using the software erroneously.
    Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
    Troubleshooting Steps for OS X
    by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
    FIRST AID
    01 Completely shutdown, wait a 5 minutes, restart
    02 Make sure you're not running out of free space on the System volume
    03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
    04 Repair permissions using Disk Utility
    05 Create a new user account, and see if the problem persists there
    06 Clear system & user caches
    07 Run FCP Rescue
    08 Unplug all USB, Firewire devices except Apple mouse
    09 Startup in SafeBoot mode, and see if the problem persists there
    10 Reset system firmware
    MORE SERIOUS TROUBLESHOOTING
    11 Reapply the latest combo updater
    12 Run the Apple hardware diagnostic CD
    13 Check the hard drive for bad blocks
    14 Take out 3rd party RAM
    15 Unplug 3rd Party PCI cards
    16 Reset PMU
    17 Archive and reinstall the OS
    18 Reinstall the system from scratch
    19 Send the machine back to Apple

  • I have a sony handy cam model HDR-HC1 and a mac pro running osx10.9.3, are they compatible? as far as downloading movies from my handy cam. thanks in advance

    i have a sony handy cam model HDR-HC1 and a mac pro running osx10.9.3, are they compatible? as far as downloading movies from my handy cam. thanks in advance. If not, is there a different route i can take to get those recordings in to my mac pro?

    See if the cam shows up under Devices in the Image Capture app.
    Image Capture is located in your Applications folder.
    Launch Image Capture then connect the camera.
    The camera should show up under Devices top left side of the Image Capture window.
    Now look at the bottom left side of the window. Click the: Connecting this (device) opens: pop up menu and select an application to import your photos.
    You can also select a folder to import photos from the Import To: pop up menu.
    Selet the photos you want to import then click Import or Import All on the right.

  • Unable to Initialize Capture Device - Works fine in iMovie

    Am using a Sony HDV HDR HC1E Pal Handycam
    Final Cut Pro 5.1
    QT Pro 7.1.3
    Works fine with cassettes in HDV - imports into FCP fine
    Am trying to import a cassette recorded on that camera in DV LP
    Works fine in iMovie
    Have deleted the QT packages and reinstalled QT
    Still am getting the 'Unable to Initialize Capture Device' message when using log and capture.
    Settings on camera
    VCR Auto (have also tried HDV or DV)
    iLink conversion off (i.e.don't convert hdv-dv)
    TV type 16:9 (have also tried 4:3)
    Component 1080i/576i also tried 576i
    Annoying thing is that works fine in iMovie but not FCP?!!
    Any help GREATLY appreciated!
    Thanks!
    Hannah
    iMac 20 Flat Screen G5 1.8Ghz 1.5GB SDRAM   Mac OS X (10.4.8)   200 GB and 120GB External Hard drives

    I would like to add the following in hopes that someone will come up with a solution. The problem lies somewhere in Quicktime and the FireWire capture. I have the exact same camera and problem, and can assure you it has nothing to do with cam settings or DV LP. Once your system is stuck in this HDV mode, it would seem that regular DV can not be used again. I also have 2 other DV cams that are not HD. One is PAL, one is NTSC. I would further add that my external FireWire iSight no longer works in any application. I do not receive error messages, I simply get the spinning beach-ball of death.
    I have a Dual G5 2.7 with 4 gigs RAM running FCP 5.0.4 on OS 10.4.8
    I have run Cocktail, rebuilt permissions and re-installed Quicktime 7.1.3 four times as per Apples tech article 301852
    I have used FCP Rescue 5 to clear preferences
    I have captured footage from both regular DV cams to iMovie and then added the footage to FCP. The footage plays on the screen of both DV cams flawlessly via FCP. (I can also capture HDV in iMovie as well)
    I have tried logging footage directly through the QuickTime application with both DV cams and my iSight and get the same beach-ball of death as FCP.
    Why can iMovie work with these devices flawlessly yet QuickTime can not.
    Why does it seem like the system is stuck in some kind of HD mode.
    Just to point out the obvious:
    I have no other FireWire devices other than the cameras and I only connect one at a time.
    I have shut down, disconnected and re-connected before attempting to use the devices.
    I have booted my G5 from a second system disk and everything (HDV cam PAL DV cam NTSC cam and iSight) function flawlessly on all the FireWire ports of my machine.
    I have worked with FCP for about 6 years and Macs for 20. I understand the easy set ups etc.
    Spent way too much time customizing my system to think about the clean install route, so I hope someone can shed some light on this.
    Thanks
    Lorne
    PowerMac Dual 2.7 GHz PowerPC G5 4 GB DDR SDRAM 400 GB and 250 GB Internal Drives   Mac OS X (10.4.8)  

  • Capturing Hi8 Tapes - My capture device is USB or S-Vid / Component Out.  Will Premier Pro CS6 Recognize this device?

    AVerMedia DarkCrystal HD Capture SDK Video Capture Device.   I'm trying to capture the video uncompressed so I retain as much resolution as possible.  I can edit to other formats from there later.  I'll be playing these tapes from the camera.
    Link:
    B&H Photo Video
    Product description says:
    Third Party Software Support
      The DarkCrystal HD Capture SDK is designed to provide interoperability with a number of widely used video editing, encoding, streaming, and playback applications found on the Windows platform. These include:
    Adobe Premiere Pro CS6
    Sony Vegas Pro 10
    Windows Media Encoder 9
    GraphEdit
    AMCap
    Adobe Flash Media Live Encoder 3
    Corel VideoStudio
    CyberLink PowerDirector
    CyberLink PowerProducer
    Real Producer (v13)
    VLC Media Player
    Image J

    No version of Premiere (Pro or Elements) will work with ANY device that does not connect to a Firewire port
    EXCEPT... you may buy a card (I think Blackmagic is one) and then use the device driver supplied by the vendor to "link" the card to Premiere (I did this back in 2002 with a Pinnacle DV500 card)
    Premiere will NOT work with a USB device... as I said above... you may use a TI chip for adding a firewire card http://forums.adobe.com/thread/940242 to then use something like a Grass Valley product

  • "Capture Device Offline" message when attempting to add additional clips from HDV Videocamera,in CS5

    "Capture device off line" message when attempting to add additional clips to existing project in Premiere Pro CS5.5.2.
    Previous capture was accomplished, but, then when trying to add additional clips from same device it failed.
    All 40 minutes of some 185 clips was originally captured using Sony Vegas Moviemaker Platinum 11, with no errors. The additional mt2 clips were then successfully imported into Premiere Pro after indexing and conforming the clips, and they play perfectly well and of a high quality in CS5.5.2 at 1440 x 1080i.
    Why would the Capture device be off line , when no physical alteration has been made to the equipment ?

    Hi Joe,
    Thanks for the advice but, the splitter may not help here, now Sony Vegas Movie Studio Platinum 12 which we also use for less complicated editing is now saying Canon HDV Camcorder is also "OFF LINE"
    I think it is a physical connection issue either with the cable , the output from the camera or input into the laptop, because it was working. The issue has been intermittent making it difficilt to diagnose. We use it only for back up as we are overseas and do not have access to our main computer. The tapes are good and the video is high quality so I will have to wait worse luck, and the technical back up for HDV in Belgium is non existent as they have no computers in the stores that have the Firewire or I33394 card.
    I have not changed any settings, I may have to wait till I get back to base in 10 days, I am also having an issue with a lens on the Canon 5 D  Mark II, which I know must go back to Service but, it still works and, has issues after I dropped it ??????????
    Message was edited by: Bob Dix Photographer

Maybe you are looking for