Sony HDR-SR12E & FCP

I want to use a hard disc camcorder with Final cut pro. Can anyone tell me if sony hdr-sr12E is compatible with FCP. ideally the files would load straight into FCP and no rendering or conversion.
if not what hard disc camcorder does work?

I just transferred a clip from my SR12 recorded in "FH", and the resulting clip details in the main "bin" show the following:
Duration: 00:27:11;03
Tracks: 1V, 2A
Audio: 1 Stereo*
Frame Size: 1920x1080*
Vid Rate: 29.97 fps
Compressor: Apple ProRes 422*
Data Rate: 17.5 MB/sec*
Aud Rate: 48.0 KHz
Aud Format: 16-bit Integer
Pixel Aspect: Square*
Field Dominance: Upper (Odd)
Opening the .mov file in QuickTime Player brought up a 1920x1080 window. The size of the file transferred is 27.86GB, so it had better be HD. :-P
* These differ from a clip captured from a tape shot in HD and imported from an HC7 as follows:
Audio: 2 Mono
Frame Size: 1440x1080
Compressor: HDV 1080i60
Data Rate: 3.2 MB/sec
Pixel Aspect: HD (1440x1080)
As far as "gimmicky", I'm not sure what you're (not) looking for, but it seems fairly straightforward to me. Hope this helps.

Similar Messages

FCE + Sony HDR-SR12E - Easy Setup ??

Hi,
Using FCE 4.0.1 with a Sony HDR-SR12E and I understand I need to set the camera from 1920x1080 to 1440x1080 so that FCE is happy. But my question is which settings should I choose on the Easy Setup panel...
Format - Apple Intermediate Codec
Use - HDV-Apple Intermediate Codec 1080i50 or AVCHD-Apple Intermediate Codec 1440x1080i50 ??
Or even something else ?
Help please - Thanks Billy

From the Apple's website:
Added AVCHD Easy Setups
Final Cut Express now includes AVCHD Easy Setups to support ingesting AVCHD footage using the Apple Intermediate Codec. The Easy Setups are:
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i60
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i50
You no longer need to use the HDV-Apple Intermediate Codec Easy Setups when ingesting AVCHD footage.
Now, if you live in an area where is in use PAL, choose AVCHD 1920x1080i50.
Regards,
Armando.

What exact file format for exporting AVCHD to HDD of Sony HDR-SR12E (AVCHD) Handycam?

When you are finished editing AVCHD files with Adobe Premiere Elements 11, what is the correct file format for exporting back to the hard drive of the Sony HDR-SR12E handycam?
I used Sony Play Memories software to import AVCHD (.m2Ts) files at 1920x1080i PAL resolution. I tried rendering to several file formats after editing, but the files could not be exported in high definition back to the hard drive of the AVCHD camera.
I WAS able to import files from camera in Play Memories and then export them straight back to camera WITHOUT any editing, but of course you wouldn't bother doing this normally.
I grew to love using Premiere Elements 10 for editing sd footage from my mini dv camera. However, I've just purchased the AVCHD handycam and expect to receive my newly purchased copy of Premiere Elements 11 in a couple of days.
Can anybody suggest the correct file format to produce for exporting AVCHD footage edited in PE11 originally captured on the Sony HDR-SR12E back to the camera?
- Regards, Phil

Phil
Premiere Elements 10 has the Share/Tape (Record to DV). And, even that is for just DV, not HDV. There is no such choice in Premiere Elements 11 and 12.
So, you are going to have to match up the properties of the original with Export settings and try to get the file exported onto the camera's hard drive if that is possible. Does the Sony user guide give instructions for how to import one of your video to its hard drive?
The theory depends on how close you want the export of the edit to match the camera's original. There is no .m2ts file extension in any of the Publish+Share/Computer/AVCHD choices. If the .m2ts file extension is a must..
One scheme to get a AVCHD.m2ts 1920 x 1080i25 for your camera's hard drive - lots of ifs
1. Publish+Share/Disc/AVCHD and burn to folder using presets = H.264 1920 x 1080i PAL Dolby.
(The preset cannot be customized so you will go with the Adobe bitrate.for the preset)
2. Then go to the folder saved to the computer's hard drive, open the BDMV Folder, then the STREAM Folder of the BDMV Folder, and use the 00000.m2ts file there as your file destined for your camera's hard drive.
If the hard drive will accept ..m2t, then you could use Publish+Share/Computer/AVCHD with Presets = M2T - H.264 1920 x 1080i25 and customize the export settings under the Advanced Tab/Video Tab and Audio Tab.
Please review and then let us know if any of this works for you.
Thanks.
ATR

Importing video from Sony HDR-CX410 FCP 6.0.6 will not recognise AVCHD files. what is the solution?

First I have to admit I'm not technical in any way so I'm easily confused so please forgive me if my question sounds unprofessional.
The computer is a Mac desk top tower with Lion OS x 2x2.66 GHz Dual-Core Intel Xeon with an internal hard drive plus a number of remote hard drives.
I'm using Final cut pro 6.0.6 to edit video.
The question is, up until now I've been using material shot on mini DV tapes, then digitised into the computer via the camera. As this format is getting long in the tooth I decided to get one of the latest DVCAM cameras, I went for the Sony HDR-CX410.
It was not until I had purchased the camera & shot a few test seq. & then tried to down load into the computer that I found out that Final cut does not recognise the AVCHD files on the SD card.I've tried importing from the camera as well as a card reader with no result.
I've looked at a number of sites including Apple support community where it looks like this is a major issue for many people but I can't find anyone who is using the same camera. I wondered if this issue is something you have covered in the magazine, if so please let me know which copy, if not can you help in any way. It appears that Final cut proX may be able to translate the AVCHD files but I'm not sure. Am I right in thinking that if I do upgrade to FCPX I will still have to convert the files, if so would you recommend a suitable software program. Is there any reason why Apple make it so difficult to edit this AVCHD format when all the latest cameras are using it, perhaps its time to change back to a PC?

Eric,
FCP 6.0.2 (compared to previous version) comes with the latest improvement and support for AVCHD.
However, here is a suggestion:
In Log&Transfer (top frame) on the right of *search field* there are three buttons, click on the one showing a little arrow-down and a sort of little star. Choose preferences then in the *transcode to* section click on those two tiny arrows pointing one up and the other down and choose Apple Intermediate Codec. Can you now transfer? (Add selection to queue)
Once again 6.0.2 might provide better support for your camera.
Use the search tool for more info.
G.
PS. Please note that some people have had problems with 6.0.2 so get us much info as you can before updating.

Sony HDR-SR12E format mpeg2 or 4 or?

I just managed to get my hands on a new Sony HD-SR12E which seems great so far. I am recording in 1920 x 1080i res and importing into imovie 08. It seems when I play it back on the Mac Pro the image looks like it has tiny lines through it. The resolution doesn't seem to be very high. However, when I connect it direct to tv it is clearly full HD resolution. Is it something to do with format of the camcorder? Am I doing something wrong? Thanks for your help

Is it something to do with format of the camcorder? Am I doing something wrong? Thanks for your help
Probably not. If you are referring to horizontal lines in areas where an object is in motion I would assume you are referring to the interlaced nature of your original 1080i ("i" as in interlaced) video which is being display on a "progressive" device (the computer monitor) which displays both half frames (which are actually a half reference cycle apart in time) at once. (This being opposed to the way the two interlaced frames would be alternately displayed on a conventional TV set in the try time order.)

Cant capture hdv from my sony hdr-sr12 onto fcp 6.0

Hi. I recently got a sony hdr-sr12e hd camcorder and i am trying to edit some footage i filmed over christmas. However when I come to click on log and capture i get a message saying:
Unable to Initialize Capture Device
Device is not connected or the capture preset is not setup correctly. You may still log offline clips.
This might also happen if you play DV footage in an HDV device.
I used to use a canon mv630i video camera if that helps?
Would really appreciate any help because I want to get editing again!
2.4GHz core 2 duo processor
200GB Harddrive
Thanks

Two suggestions in this thread: http://discussions.apple.com/thread.jspa?threadID=1870782&tstart=0
There are hundreds more if you do a search.

Can't import HDV 720p from my Sony HDR HC1 camcorder to my FCP 5.0.1 help

I have footage that was shot on a contractors JVC HDV camera at 720p. I play it in my Sony HDR HC1 and i can view it and it plays awesome. It even recognizes its 720p. But i try to import it into Final Cut Pro on my IMac G5 or powerbook G4 17inch and it can play the camera but not capture footage. I have FCP version 5.0.1 How can i get this video into my editing software ive tried it on imovie as well and cant import video but i can control the camera. Please help.
Do i need to buy the updated FCP i noticed doing some research there is a FCP 5.1 now that i heard nothing about?
Thanks for the help in advance.
powerbook g4 17inch, powerbook G4 12inch, imac G5 Mac OS X (10.4.7)

Get a hold of the JVC camera the footage was shot with. When FCP 5.1.2 is released (this month), you'll actually be able to capture the footage directly... problem is that the JVC recording is short GOP, and FCP currently only supports LONG GOP... You will need to upgrade to capture the footage directly, or buy this: http://www.lumierehd.com But in any event, you'll need the JVC camera to capture it's recordings, now or in the future.
JVC's iteration of HDV isn't the same as Sony's... that's the problem. PLUS FCP doesn't support any recordings of the JVC format except 1080i60 as of now. 5.1.2 will change that I believe. IBC was where this new update was announced I think, and you'll need to "cross grade" your FCP 5.0.x version to FCP 5.1. to get this update down the line... Yeah, I don't like the situation either, but there it is... Canon's HDV and JVC's HDV are very similar FWIW...
Jerry

Have FCP, new Sony HDR-FX7e and an iMac G5 (non intel core) please help

Hi,
This is going to be a bit of a dumb question but i need to ask to be sure of the equipement i have and if i need some new hardawre n my mac to capture the video in HD.
I have an older iMac G5, FCP and a new Sony HDR-FX7e with Belkin 4-6 pin iLink cable.
When i try to capture video that i have filmed in HD 29fps, FCP brings up an error:
Something like: Codec is wrong and also hardware card. I am guessing that the video card is not capable enough as it is the one that came with the mac. Also i am trying to capture the video onto the Hard drive which has 198Gb left. I guess this needs a firewire drive capable of teh right speed.
I am guessing here so please advise as i am so new to this you would not believe and i know it is ambitious of me to expect to plug and play but i can pick it up quickly with the right advice.
Oh, the easy set up i used was on 1080i 60
Thanks,
Neil

Neil,
1) Your best bet is to get 5.1 if you do not have it yet. It is a paid crossgrade, but as long as you have the original install discs it is a simple process.
2) The "e" at the end of your camera indicates that it is the PAL version I believe. Do you edit in PAL? or NTSC? Whichever you use just make sure to choose the proper easy setup.
3) Since you have a G5, I would suggest using that as your video machine. You can get around the firewire situation in one of two ways. First, and best in my opinion, is to purchase a second internal SATA harddrive and install it in the spare bay, set this as your "Scratch Disk" and your off. Second, buy a PCI firewire card and install this in a spare PCI slot, then connect your firewire drive to this. Or, if you feel the need, do both.
4) As for why iMovie works and FCP doesn't, the simple answer is the iMovie is a consumer program that has much lower tolerances than the PRO FCP. From what I understand, iMovie does not capture timecode and does not capture audio and video as separate files, among other things. To do these things there must be proper communication between the computer and camera.
5) Another thought is that your camera may be set to downconvert the footage to SD on output. This might also explain why you got something in iMovie and not FCP. Check in the menu system for your cam and see if it is set to downconvert.
K

FCP 5.1.4 & Sony HDR-V1U (Log/Caputure)

I am running into issues where Final Cut Pro 5.1.4 will no longer recognize my Sony HDR-V1U.
Originally, when first connected to FCP, the Sony was able to communicate fine. I also had a few cassettes that were standard def... and since going from NTSC DV back to DVD PRO HD 10280i60 under Easy Setup, FCP no longer accepts any form of communication with the device unless I have it specified on the Sony to down-convert to SD.
I've read a few other posts -- and saw this as the only solution. However, then I'm better off using iMovie to log/capture as that actually accepts the HD format.
Is anyone familiar with a fix to the issue?

Try the other device control presets... I'm pretty sure that any sony camera uses the HDV FW preset and not the basic FW presets.
Jerry

Sony HDR-HC3 to FCP to Color to FCP to Mac Mini

Hi,
My objective is to play our edited family videos using our Mac Mini(2.0 GHz Core 2) on a Sony 52" LCD at full 1080 resolution. The video is stored on a Firewire attached 1 TB LaCie external disk.
I use a Sony HDR-HC3 video camera (HDV 1440x1080i 25 fps) and use FCP 6.0.4 for editing. I have recently been learning Color for grading.
1. Currently reading footage into FCP as ProRes 422. Footage comes in with the following profile:
Sequence Preset: Apple ProRes 422 1440x1080 50i 58 kHz
Capture Preset: HDV-Apple ProRes 422
Current captured footage I'm working with has a data rate of 12.5 MB
2. Once editing is complete, I "Send To" Color and perform the grading
3. From Color, I "Send to FCP". (It asks "Change graded FCP seq. to match the QT export codec?" not sure whether I click Yes or No here)
4. After selecting Yes, the footage returned back to a new sequence in FCP now has the following profile:
Apple ProRes 422 (HQ)
1920x1080
21.6 MB/sec
From reading the Apple documentation, I was expecting something funny to happen coming back from Color.
5. I then send this sequence to Compressor where I select the "Apple | Formats | Quicktime | H.264" preset in the hope that I can render out an H.264 1920x1080 file to play on the Mac Mini. It renders it but the Mini can't play the video smoothly.
As I am still learning, I would appreciate any suggestions on an alternative workflow that can lead me to a 1080 video file that can play smoothly on the Mac Mini.
The Apple TV preset renders a video that works smoothly on the Mini, but I'm hoping for the full resolution.
Regards, Tony

Hi Shane,
Thanks so much for responding. Great tutorial also. And I wasn't conscious of any 'drone'...
Yes, I've tried to have the Log and Transfer recognize the card (through both the card reader and lately, by using the camera as a deck but without luck).The card reader and camera mount on my desktop as NO NAME and when I ADD VOLUME I scroll down to devices and click on NO NAME but L&T doesn't recogize the source and nothing happens. That's why I went in to see if the AVCHD folder might be recognized and got that invalid directory message. Following your tutorial I went into preferences button on the right hand upper corner of the L&T interface and selected the AVCHD - Apple Prores LT path in case that made a difference, but no go. Any other suggestions/thoughts?
Cheers, Mark

View Footage from FCP to Sony HDR-HC7 Camera

Hi all,
I have final cut pro and a Sony HDR-HC7 camera with a SAMSUNG external monitor. I'm trying to view edited video from FCP to my camera then through HDMI to my SAMSUNG external monitor. I can't get this to work.
This works fine through my DVDPRO deck then component to SAMSUNG external monitor.
Any ideas? Thanks in advance.
mdawg

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

FCP X transcoding Sony HDR-FX7 (1080i) to NTSC 720 x 480. Results are not pretty.

Help, please? I shot some interview footage for my student documentary film with a Sony HDR-FX7 (1080i). FCP X transcodes it to NTSC 720 x 480 on import and it looks awful. Have now learned the difference between interlaced and progressive!. The film project has 1080p footage as well and won't deinterlace in Compressor or JES. Not sure what to do: can't reshoot. I've spent hours on Google and YouTube and can't find a solution or a viable workaround. Would welcome your help; thanks!

I don't know what you're doing but there is no way FCP imports that media to 720x480, unless the camera is set to downconvert on output. iLink has to be switched off.

I have picked out a moderately priced camcorder (Sony HDR-CX260V High Definition Handycam) andwant to know if it produces files that easily integrate with FCP X on Lion. Thanks.

I have picked out a moderately priced camcorder (Sony HDR-CX260V High Definition Handycam) andwant to know if it produces files that easily integrate with FCP X on Lion. Thanks.

Download the free 30 day trial of FCP X to find out for certain.
http://www.apple.com/uk/finalcutpro/trial/

Is a Sony HDR SR7 compatible with FCP HD 4.5 ???

Ok I have been trying to get the video to work on my computer for way too long now. I have a Sony HDR SR7 Camera and I am running on the Leopard 10.5.2 OS and have FCP HD 4.5. I copied over the AVCHD folder into my external hard drive and then got Voltaic to convert the files into .mov files. Now when I try to set up the correct sequence in FCP I can't get it to work right. I have tried many different sequence settings and I get one that works for the first clip, but then every other clip i try to put on the timeline is squished and not at the right screen width.
Please can somebody help me?

You have two strikes against you.
1. FCP 4.5 is not supported under leopard (aka OSX 10.5)
2. FCP 4.5 does not support HD video other than DVCProHD - which your camera does not record.
The simple solution is to upgrade to FCS2 (aka Final Cut Studio 6.0.3)
x

Trying to get Sony HDR-XR100 files (.MPG) on FCP! Please help!

I've purchase Final Cut Pro to edit video coming off of a Sony HDR-XR100 Camcorder. I can import all of the video files (.MPG) to FCP, but when I play them there's no audio.
And when I try to play them from the canvas it simply says "Unrendered."
Is my program set to the wrong default codec? How do I find the proper codec to set it to?
I was also told that there may be a plugin on the sony website to solve this problem, but I haven't been able to find anything that looks like this ...
What should I do?
Thanks in advance!

Hi -
Why don't you do a test file and see if it works for you before you do the whole bunch.
Download MPEG Streamclip and launch it.
Drag one of your mpg files to the square in the center of the window.
Go to the file menu and choose export to Quicktime:
!http://www.spotsbeforeyoureyes.com/MPEG_StreamclipExport.jpg!
Set your settings like this:
!http://www.spotsbeforeyoureyes.com/MPEGStreamClipDV.jpg!
and convert a file.
Then open FCP, go to the menu Final Cut Pro > Easy Set Up and choose Format: All formats, Rate: All Rates, Use: DV-NTSC.
Then open a new project and import your test file,
Create a sequence and you should be good to go.
You'll have to find info on the batch process part.
Hope this helps.
Mtd

Sony HDR-SR12E & FCP

Similar Messages

Maybe you are looking for