Sony hdr ux1 camera

Does fce 4 support Sony hdr ux1 camcorder?

Tom, I went and purchased Leopard, so what do I do to get footage from ux1 (dvd) into imovie 8? I connected the camcorder to my imac with Leopard, but nothing happened. Would really appreciate any advice, thanks.

Similar Messages

How to import AVCHD from Sony HDR-UX1

Ok, little frustrating getting this to work but here's how it worked for me.
First you will need ReadDVD! from http://www.softarch.com/press/readdvdIntel1.htm ($50)
This will allow your mac to mount the mini-dvd in your camera. The disk is formatted utf 2.5 as far as I understand and osx cannot mount this drive correctly.
Connect your camera and using finder copy the whole BDMV folder from the camera to an external drive (i'm just using a generic usb drive). Now disconnect your external drive.
Open up iMovie and then reconnect your external drive - the import wizard now pops up and you can bring your clips in.
Note : If you have perian installed - disable it or iMovie will crash.
I'm using the Sony HDR-UX1 camcorder on an Intel MacBook with an external usb drive (fat32 formatted)
I hope this helps others with this type of camera. I'm just a mac beginner so unfortunately I probably can't help much if you run into problems.
Sartori

Hi James,
Can you tell us some more about your computer's hardware?
What is you processor,
How much RAM,
HDD size,
What type of graphics adapter and how much memory is allocated, and whether that memory is shared or dedicated?
Are you running any other Adobe programs, like Photoshop, After Effects, or Audition at the same time?
I know that the System Requirements do not list Windows Vista Home Basic, but that's not to say you can't get it to run, and run fine, but the combination of factors could choke your system, especially if you are scrubbing HD video.
http://www.adobe.com/products/premiere/systemreqs/
Chris

Print to video - HDV 1080i60 to Sony HDR-HC1 camera

Like many before, am struggling with print to video of HDV material captured as HDV 1080i60 to a Sony HDR-HC1 camera. Just can't figure out what settings to use, only get the darn blue screen. Have tried several settings, but no success. Does anyone know the trick? Thanks!

Tim Kuhlman-
Have you tested the camera with non-HDV just to make sure the camera works?
Luck-
-DaddyPaycheck

View Footage from FCP to Sony HDR-HC7 Camera

Hi all,
I have final cut pro and a Sony HDR-HC7 camera with a SAMSUNG external monitor. I'm trying to view edited video from FCP to my camera then through HDMI to my SAMSUNG external monitor. I can't get this to work.
This works fine through my DVDPRO deck then component to SAMSUNG external monitor.
Any ideas? Thanks in advance.
mdawg

Thanks for the answer.
Now I tried to link my iMac directly to my television (mini DVI to HDMI) to watch my movie, but I got no picture on my television. It is a Panasonic Viera, HD ready (TH-42PV60E). It has 2 HDMI inputs. Has anybody succeeded yet in doing this?

I Can´t get my macbook pro to recognize my Sony HDR-HC1 Camera

This is my first Mac computer in life and I´m trying to connect my sony Hdr-Hc1 camera through the firewire 800 port but there is no sign of recognition of the device on the system or on final cut or imovie.
I´ve seen a lot of topics on the matter but mostly for other model of computers, as I´ve come to notice there seems to be a solution for the matter but I haven´t been able to reach it.
Has anyone experienced this specific problem?

Plenty of discussion here:
http://discussions.apple.com/thread.jspa?threadID=303903

I'm trying to upload videos from my Sony HDR-CX550 camera and the files that contain the video (.cpi or .mts) are all grayed out on iMovie. I've been able to upload footage before onto Apple computers but now it doesn't seem to be working. Suggestions?

I've tried many different options including calling Apple Customer Support and talking to them for over an hour troubleshooting the issue. They couldn't do anything. I also called Sony who failed as well. Somebody please help me out. Thanks!

Hello whatif95,
Sorry to hear that you are having trouble importing video from your Sony HDR-CX550. I found an article that provides some information specific to your camera and iMovie '09:
iMovie: Importing both HD and SD content with Sony HDR series cameras
http://support.apple.com/kb/HT1793
For versions previous to iMovie ’11 v9.0.1, including iMovie ’08, ’09, and ’11 (v9.0 only):
To import the AVCHD content from the camera when MPEG-2 content has also been recorded, you must first import and erase the MPEG-2 content from the camera. You should then be able to import the AVCHD content.
I hope this helps!
Best,
Sheila M.

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

New iMac does not detect my Sony HDR video camera

I just purchased a new 24inch (2.8Ghz) iMac with Leopard installed. I wanted to try making a short home movie using iMovie but my Mac cannot seem to make a connection with my Sony HDR-HC3 video camera. It doesnt even detect it. Can anyone tell me what i'm doing wrong?
The Sony HDR-HC3 uses an iLink (firewire 400) cable to connect to the Mac. The camera did not come with a supplied iLink cable and i had to buy a compatible iLink cable made by a company called EDM. Surely it cannot be the cable that is causing this problem?

Good advice.
I thought what i did were normal steps, that's why i skipped those..
What i did:
1. Search thru this forum. And find out all relevant threads, inclusive trying whatever methods suggested... (i suppose i have screened through all)
2. Besides image capture, i went to system profiler and click on the USB, nothing was shown when USB was plugged. (i tried with my FUJIFILM FINEPIX F30, which worked well)
3. Visited Sony support website (obviously not as friendly as apple's site)
i don't know what else i can do. I have even tried to kept Switching on/off the camera, pluged out my mouse/keyboard while trying, restarting the Mac...
MANY THANKS AGAIN!!
p/s-by the way, saw some threads that said solution in card reader (i don't have any).

Imovie 10.0.1 erkennt Sony HDR-XR550 camera nicht mehr nach Mavericks update? Kann da jemand helfen zu definieren, was in diesem Falle helfen könnte

Ich hatte wie schon einige Jahre zuvor , nach Kabelanschluss einer Sony Video Camera an einen USB Stecjkplatz an meinem iMac ( Baujahr 2008 ), den ich kurz vorher mit dem Betriebssystem Mavericks ( OS X 10.9.1 ) updated habe, versucht, eine neue Filmsequenz von der VideoCamera nach iMovie ( 10.0.1 ) zu importieren. Ich kam damit aber nicht weit, da die Camera von iMovie offensichtlich nicht erkannt wurde. Es poppte allerdings nach Drücken des "Import" Buttons kurz eingeblendet die Mitteilung auf , dass bereits alle Videos von der Camera in das iMovie Programm übertragen seien, was allerdings nicht stimmt, da die neueren Filmsequenzen auf der Camera abrufbar sind, aber nicht unter "Ereignissen" im iMovie Programm. Die übrigen Funktionen des iMovie Programmes funktionieren einwandfrei, nur das Importieren geht derzeit nicht. Ich habe schon alles probiert, was die Steckverbindungen und Kabel betrifft, das Programm und den Mac neu hochgefahren, aber ohne Ergebnis. Weiss da jemand, was man in einem solchen Fall machen könnte?

WHy don't Final Cut Pro 7 recognize my sony hdr-sr11 camera.

Final cut won;t recognize the camera for log and capture. iMove doesn't recognize it either. Help

That's an AVCHD camera.
You connect it with a USB cable and use Final Cut Pro's *Log & Transfer* function to bring in the clips.
[AVCHD workflow in FCP.|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkfl ows/#chapter=6%26section=0]

I Movie not importing from my Sony HDR HCI camera...why?

My HD camera is not importing into I movie. When I import, it records just fine and it shows a clip being recorded. When stop the import after 5 or 7 minutes, I MOVIE then shows a total clip of a few seconds up to a few minutes, but never the whole clip.
What is wrong?

Hi Bob
HD Cameras is not my thing But the import problems I got some ideas about:
- most common problem is wrong mix of Mac OS + iMovie version + QuickTime version.
I would use Mac OS X.4.8 + iMovie 6.0.3 + QuickTime 7.1.3
The amount of free space on Your internal hard disk (more than 20Gb +
space for the movie material) - and make Import to this.
Other programs working in the background can interfrere - then mainly FileVault
Turn this OFF!
Yours Bengt W

How do I capture HDV in Final Cut Pro 6.0.6 from a Sony HDR-CX360?

Hi. I recently upgraded to a Sony HDR-CX360 Camera. I've been importing off of Firewire with my older cameras. Now I face only being able to import with USB. It is not recognizing the camera. How do I import with this kind of camera and Final Cut Pro 6.0.6.? It works fine with iMovie.

Hi,
There are a couple of things I would do in your position .. first off make sure the camera is turned on and connected BEFORE I start FCP. another would be to run up system profiler and have a look in FireWire - and see (obviously with the camera connected) is it listed in there .. If not in effect the MAC is not seeing the camera and Failing that if it is a six pin on the camera connect to a six pin port .. I had issues with a Camera (Canon XHA1s) which the MAC Pro FireWire (8 pin) would not list the camera until I installed an two port 6 pin FireWire card .. It works every time now. Hope you get it sorted ..
Jim

Problems with HDV footage from sony HDR - HC9

I have a new sony HDR-HC9 cam corder. I want to shoot in hi def (HDV) format for best quality, but I produce standard def DVDs as a finished product. I was hoping to use the built in iLink conversion from HDV to DV when downloading to the computer into iMovie. I have had many problems with this.
Usually, when I set it up to do the downconversion, I see a blue screen in iMovie, although iMovie will ff and rew the camera, no images come across. I experimented with setting the camera in DV record mode at the same time as I had the iLink down conversion set, and this appeared to work. I started downloading an hour tape, and when I came back 65minutes later (after it should have been done), saw the message that iMovie had quit. Reopened the project, and saw an hour worth of footage in the trash, but it was too crazy to reorder the clips from the trash back to the clips pane.
I resigned to import in hdv (1080i) format and not mess with hardware downconversion. This worked fine. I then added some chapter markers and shared the project with iDVD. I saved the project as an image file and then mounted it to check it for errors. The video was OK, but towards the end of the project, the sound was out of sync by a few seconds with the video.
I deleted encoded assets from the iDVD project, then reburned (save as image file). Same defect.
I then started a new iMovie project in standard DV widescreen, and dragged all of the clips from the HDV (1080i) project into the time line. It took over an hour for my mac mini to run the conversion, but the movie in iMovie appeared OK. I redid the iDVD project, and saved as image file. It appears to have worked correctly (although I have not looked at it on my widescreen TV yet to assess image quality.
Questions:
1) Has anyone had any luck getting HDR-HC9 iLink HDV-DV hardware conversion to work with iMovie, consistently?
2) Can anyone comment on image quality issues with converting HDV to DV footage using iMovie software.
3) Has anyone seen audio sync problems with iDVD from HDV original footage.
Thanks

Hi - you may get a more exact answer in the BlackMagic Macintosh forum, since there aren't a lot of BlackMagic queries on the Apple Discussions forums:
http://forum.blackmagicdesign.com/viewforum.php?f=11

No longer able to import movies from Sony HDR-SR10

I have a Sony HDR-SR10 camera. I have previously been able to import videos from it to iMovie '08, but now I always get an error :
*An Error Occurred During Import*
There was a problem importing 1 of 1 clips from your camera. Please review the imported movies carefully.
I can't think of anything which has changed since when I was able to import movies, except that I have upgraded to Snow Leopard.

Hi Winston, thanks for your answer. It's a bit worrying to hear about having to format the camera every now and then' I haven't formatted it since I bought it 18 months ago...
No, I don't have any other software that can convert the videos. Is there any free software which can do it?
I did try repairing the image database on the camera, but it didn't help.
I don't know if this is clear from my previous post, but none of the clips on the camera can be imported; it's not just some of them. There are hundreds of clips on the camera...
Sony have told me I should upgrade to iMovie '09; do you know if this is likely to help? Could the problem be caused by running iMovie '08 on Snow Leopard?
Thanks for your help.

Sony HDR-SR10 Handicam

Just got this today so might be doing something wrong.
When I connect this camcorder iMovie doesn't open automatically.
Have to do it manually. Came with software for a PC, I have a PC so probably can do it on PC but rather use the mac software iMovie. My iMovie 2008 has the latest update from apple.
Any suggestions...???
Tony

Hi Tyson. Sorry for the delay in replying. I've been away on holidays for the past week. Here are a few thoughts.
iPhoto will open if you have any stills recorded on your camera. I find this a nuisance so I used [Flexibits Cameras|http://www.flexibits.com> to create a profile for my Sony HDR-SR12 camera to prevent this happening.
MPEG will only be useful if you have recorded SD footage on the camera. It doesn't play AVCHD footage.
Some people have reported that Airport can cause a delay before a camera appears in the Log & Transfer window. Try switching Airport off and see if the camera is recognised more quickly. (It only takes a few seconds on my system.)
Otherwise you can try pointing L&T directly at your camera by clicking the icon at the top left of the L&T window; the icon shows a folder with a + next to it. Then just navigate to your "No Name" directory.
By the way the AVCHD files are those in the Stream folder. Toast 9 or 10, VideoPier or Voltaic can be used to transcode these files directly if you can't get L&T to work.
Frank

Sony hdr ux1 camera

Similar Messages

Maybe you are looking for