Sony IDE DVD Drive not being recognized

Motherboard : P7n-SLI-FI
MS-7380
I recently upgraded my computer a bit with this new motherboard, ram, video cards, power supply. I used my older dvd drive that was working in my last computer. It is currently connected via IDE ribbon, but it does not show up in my computer or when I put in a CD does not auto run.
The unit does have power to it ( The eject button works, light on front blinks a little )
In BIOS I tried changing the IDE primary from AUTO to DVD/CD Drive and it still did not work.
Any suggestions ? Buy a new dvd drive that is SATA ?
Thanks

Also check the jumpers on the IDE optical drive so as they are set in Master mode as its the only IDE device in the system, assuming that you have a SATA hard drive, or if your hard drive is also an IDE one then you have to set the jumper to run as a Slave mode.

Similar Messages

Having a problem with the DVD drive not being recognized by the computer

Compaq Presario CQ60-215DX NOTEBOOK PC, WINDOWS VISTA, Error 10 when trying to reinstall the driver, says cannot start.
I went thru the HP troubleshooting and it said to see the mfg of drive to solve problem! I finally bought a new DVD drive P/N498479-001 for replacement . uninstalled the old drive & then reinstalled the new drive , restarted the computer & it still will not recognize the DVD player! Same error code, same problem. The problem started when I tried to play a CD that appeared to be scratched pretty badly, however my desk top played the CD with out problems? When you click on "computer" the drive does not show up!
I did install a new router a couple of days before this happened, but I am using a data cable to it, so that should not be a problem. Any Ideas?

Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ

Hard Drive not being recognized on my Graphite Clamshell

I have a challenge for anyone. I have a ibook 366(clamshell) that is not recognizing the hd. It was working wonderfully one night I shut it down and the next day I get the flashing question mark. I've tried all of the normal stuff: zap pram, reset nvram tried to use command and s but it didn't go to the programmers screen and all the such. I can boot from a cd but none of the utilities see the hd. I have taken the hd out and connected it to a usb to ide cable that allows me to use it as an external drive and it is recognized without any problem on all of the other macs I connect it to and even on a pc (I know I said the bad word.)Does anyone have any clue what could be the issue. Every thing else seems to work fine. Just the hd is not being recognized. I even put in a different hd. I even formatted the drive using one of my macs that I only have 9.2.2 on and installed a os on it and it still didn't work. The hard drive worked fine and the os with all of its components seemed to be fine. I know it's an older system but it's something that I can let the kids play on and not be concerned with losing any of my files.
I appreciate any help
iBook 366 Graphite

Duane, Thanks for your reply. Is there any way to test this? I am going to try to see if any of the utility disks can recognize the hd. I've tried DW 4.0, the Utility Disks on OS 9, X. I've even tried FWB and a few other tools.

Acomdata 500gb External FW Drive NOT BEING RECOGNIZED!!!

I have been running an Acomdata 500gb FW External Hard Drive for my data intensive applications such as FCP and it has been working flawlessly for about the last year...
Yesterday I powered up the Mac and turned on the drive along with my external USB drive and the Acomdata drive turns on, lights up, and makes noise like it's working, but it is not being recognized at all by the Mac. I tried unplugging it, switching out the FW cord, changing the FW slot it was being plugged into, and everything else of that nature that I could think of. Of course the USB drive that has non-important work related stuff works just fine :/
So I'm wondering, does anyone think the drive has officially crapped out? It turns on and works so I can't tell. I'm PRAYING this is not the case, but I didn't know if there were any possible FW configuration settings that could have been changed or something like that. Any ideas?

Did you recently update to 10.4.10? Is there another computer that you can plug the external into to see if it's recognized? Have you tried plugging another FW peripheral into your main computer to see if it recognizes it?
Some people have had good results from the following:
1. Downloading and installing the combo updater of the system software update they've just applied via "Software Update...". In your case the update you need is at:
10.4.10 combo updater
2. Another trick is to restart each by zapping the parameter RAM:
Zapping the P-RAM:
After the startup tone, hold down <commandd><option><r> until 3 additional startup tones are heard, then release the 4 keys.
3. A 3rd tip would be to do Open Firmware resets on each:
After the startup tone, hold down <command><option><o><f> until the text screen is visible. When text can be entered, type the following commands, followed by the <return> key (there are no space characters in each command):
reset-nvram
set-defaults
reset-all (the Mac will boot up after this command is entered).
Also, see if anything in this Apple KB article helps:
http://docs.info.apple.com/article.html?artnum=88338
Please post back with results,
Miriam

Seagate portable drive not being recognized after OSX10.9.2

After I installed the 9.2 update, my Seagate portable external drive is not being recognized - doesnt show up in Finder, or Disk Utility, but I know the drive is live, as I can feel it vibrating
Someone please help, all my time machine backup is on that

I had the same issue - the Seagate drive is in a format that will recognize both Windows and Mac formats and there seems to be a flaw with Seagate. After working on this for five hours and finally calling Apple, I found out why. If you reformat to Mac OS extended journaled then they usually start working properly.
When I contacted Seagate they said it was best if you are just using a mac to just use the Mac formatting.
Hope this helps and good luck. Hope there wasn't any valuable data on the drive.

Hard drives not being recognized on Server 2012 R2

Hi,
I added 2 hard drives to my server but they are not being recognized by the operating system. They show in the bios but no where in the OS do they show. They used to be external hard drives but I took the hard drive out and installed them into the server.
Are there some type of drivers I need to download for them to be recognized? One of them will be shown but it tells me I need to reformat it. I don't want to do this since I have about 1TB of data on it.
Thank you,
James

What server hardware is being used? May need the manufacturer chipset and support pack in the case of integrated disk controller.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Optical Drive not being recognized by Macbook

I tried inserting a dvd into my Macbook today and it makes a clicking noise (something it used to do when it still played dvd videos), then it spits the dvd or music cd out. For a time it was not recognized in my system profiler, but I just checked it again and it was there, however, it still spits out the cd/dvd I stick in.
Also, when I try to open DVD Player it says, "There was an initialization error. A valid DVD drive could not be found. [-70012]"
Any ideas? I'm up-to-date on my OS and drivers, to my knowledge.

Try the ideas from here.
http://docs.info.apple.com/article.html?artnum=88275-en
Mort

External Hard Drives not being recognized

I have 3 external hard drives. Had them for a long time now. I recently made only one change: I decided to start using the 'sleep' mode.
I noticed the sleep mode and external hard drives didn't get along real well, so I simply took the externals (used only for backing up data) and turned them off.
Its now been about 2 weeks, time to fire them back up and backup my data. Only one of the 3 is being recognized. The other two seem to come on, make the usual whiny noise and such, but aren't seen in the finder.
I've tried restarting my computer, turning off/on the hard drives, unplugging/replugging them from power, unplugging/replugging them into USB. I've verified connections, that kind of thing. Nada.
Any ideas on what to do to help my computer 'see' that they are there? this is a bit baffling to me and disconcerting, to say the least. I've never had problems with my computer recognizing the externals before.
Ideas are appreciated.
PowerMac G4 1.42 duel Mac OS X (10.4.6)

'sleep mode' ?
Do you mean the drives are triggered to not spin up for a period after powering on ? This is a feature designed for enormous banks of drives, so that when they are powered on, only a fraction spin up immediately, then another set, usually 12 seconds later, then another set, etc, until all are up to speed. This is reduce the power surge from spinning up 700 hard drives simultaneously in a commercial solution.

External Lacie DVD burner not being recognized

Maybe I'm doing things in the wrong order - I put a Sony DVD into the external burner and then click on the burn tab in DVD Studio Pro. But I get a message saying to put a burnable DVD into the optic drive. When I put the DVD into the internal drive, it's recognized. I never had a problem with the external burner. Am I doing something wrong?

I also have a Lacie burner and although they claim that one no longer needs to download their disc recording support with 10.4 or later, I had to install it because my system (10.5 at the time) wouldn't recognize it (if you recall, Mac OS did not recognize or support external burning in the old days, but is supposed to now - for whatever reason, it did not on mine without installing the Lacie software).
So, you might try first to see if your burner is listed in HD/Library/DiscRecording/Device Profiles. Mine has a file there: LaCie.drprofile from 2008. If you don't have a file there, try going to their support site and downloading the DiscRecording Support; it's an old file, but I've not had a problem with mine.

External hard drives not being recognized by Lr4

When I hooked up my two external hard drives to my computer this week, Lr4 is not recognizing them. Each folder has a question mark by it.
Appreciate any help..thanks!

Hi Jim,
I spent some time doing maintenance on Lil's computer. We were on public networks for 10 days and so I ran some cleanup software to help ensure that we don't have some virus or other malware messing things up.
Then I did some comparing and it appears that Lightroom has the G and H drives reversed.
I have enclosed 4 screen shots. Two show the strong(but not perfect) correlation between LR drive G and Explorer drive H........and vice versa. Another shows the K drive and the fourth shows the G drive one level up as you requested. I believe that when we disconnected this computer to take on vacation that we just pulled all the plugs and did NOT take any steps to "logically" disconnect them. If LR is sensitive to drives just being removed by pulling the cable, then perhaps that contributed to this situation...although I believe that we used the same procedure in the past.
Thanks,
David Polley

External DVD writer not being recognized?

I picked up the LG-5163D dvd drive and for some reason my ibook isn't recognizing it. My ibook is brand new and so am i to the world of mac.
I love my mac and i'm trying to take ulitilize everything i can do. If anyone has had this same issue and has come to some sort of resolution, please let me know. If you know how to make my ibook recognize the drive that would be great too.
thanks in advance

Is the external drive use a power supply or is USB powered? Some computers may not be able to supply enough power over usb to power a hard drive. OR the computer may need to use 2 USB ports to power the drive, Or a USB self powered hub.
Probable the easy thing to do would be boot the computer into disk mode. and then plug the computer and the external drive into the other computer. And use that computer to copy the data from the external drive to the new built in drive.
http://support.apple.com/kb/ht1661 explains how to boot a computer into disk mode.
good luck~

DVD Drive not being able to boot off of. Not seen in Boot Menu options in Bios.

HI Guys,
I am having a serious problem here and Lenovo Support has been bouncing me around between Hardware and Software Support.. They are extremely uneducated and I miss Dell Support. They are not educated about their own product and it saddens me. Here is my problem and there should be a simple soulution. Please help.
1) I have a IdeaPad U 430 Touch laptop. It came pre installed with Windows 8 Home. Unfortunately Windows 8 Home did not work with any of my Business Applications..
2) I completey wiped my Hard Drive using Government Software to write 1 and 0's.. I installed Winows 7 Ultimate successfully by booting off of my External USB DVD Drive.
3) After sucessfully installing WIndows 7 Ultimate I upgraded my Bios to the latest version.
4) I am able to see my DVD Drive in WIndows 7 at the Operating System Level.
5) This is the problem I can see the External USB DVD DRIVE in Windows 7 Operating System Level. Its in Windows Explorer.. However I am unable to Boot off the DVD Drive. When I reboot the latop and press F12 the External USB DVD Drive is not listed there. This is the Same External USB DVD Drive I used to wipe the Hard Drive Clean and install Windows 7 successfully.. My Bios is set to Legacy..
6) Please Help.. Someone

hi Agent0
Thanks for Posting!
Upgrading the BIOS might set off something.
Check under Exit TAB and see if you have OS optimized or OS optimal Settings.
      Change it to other OS or Disable.
      Save and Exit
Boot into BIOS again.
      Check Boot Tab if you have now a Boot mode and Boot Priority.
       Set those to Legacy / Legacy first.
Look for Secureboot and disable it.
      Save and Exit and try the F12 and see if you can have the ODD drive as an option again.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

WD Passport External Hard Drive Not Being Recognized on PowerBook G4

I bought a WD Passport 320GB USB 2.0 powered external hard drive that isnt recognized by my PowerBook G4. The funny thing is that the external HDD works perfectly on my friends MacBook! What's the deal with that?
I called AppleCare but they just told me to take it into my nearest Apple Store... LAME!
Can anyone else help?
Message was edited by: WRDinc

I had the same problem. See below for the answer from WD (...sigh...):
Cause:
Many 15" and 17" Macintosh PowerBook and Mac Book Pro Laptops do not provide enough power through a single USB port for the WD Passport™ external USB hard drive to work correctly. The WD Passport™ external USB hard drive requires a minimum of 1000Ma (Milliamps) of power for proper usage.
Resolution:
You can purchase a WD Passport™ Power Supply or a USB 2.0 Power Booster Cable from links below to the Western Digital Online Store.

System recovery on Satellite M100 due to CD/DVD drive not being recognised

Hi.
My computer won't recognise the internal CD/DVD drive anymore (eg. if I go to rip a CD with Media Player it says to install a CD drive first).
I have followed the FAQs on the Toshiba support page, and it has lead me to do a System Recovery. I followed the instructions (switch off, start up while holding "0", release 0 when computer beeps ...) but it isn't working.
The comp starts beeping as expected, but when I let go of "0" it just starts up windows as normal.
Can anyone help? Do I need to do the recovery with a CD instead? Obviously that will be a problem if the drive doesn't work though :(

So... after months of trying to fix this issue it would make sense that less than an hour after I've put a post asking for help, the thing would fix itself for no reason.
Yep. Seems to be working now. I have no idea why :/

External USB hard drive not being recognized

Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
Help? I'd hate to have to give up this fancy keyboard...
Thank you!
Dr. E

I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
Here is what System Profiler has to say about my drive:
USB2.0 Storage Device:
Capacity: 93.16 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x6830
Vendor ID: 0x04b4 (Cypress Semiconductor)
Version: 0.01
Serial Number: DEF107920F07
Speed: Up to 12 Mb/sec
Manufacturer: Cypress Semiconductor
Location ID: 0x3d130000
Current Available (mA): 100
Current Required (mA): 0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
USB:
Capacity: 92.84 GB
Available: 53.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/USB
I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
Sorry I'm not terribly helpful - Thank you!
Dr. E

Sony IDE DVD Drive not being recognized

Similar Messages

Maybe you are looking for