Sony KDL-48W600B will not display 1080p signal through HDMI
I just bought that sony KDL-48W600B 1080 tv and want to use it as monitor for my pc.. but the tv only shows pc content if I put the resolution to 720p. When I go higher the tv shows black/blank screen. What should I do to get 1080p output on the TV via hdmi?
make sure the TV is on when you boot the computer. I have had that happen, I am assuming the model supports 1080 mode.
Similar Messages
-
Mac mini will not recognize my hdtv through hdmi to hdmi
I just bought the new mac mini, got home super excited, hooked it up to my hdtv through hdmi to hdmi and nada.
I have a Vizio, 42-inch, 50/60 hz, Plasma TV. It was made in 2006 so there is no DVI port, it only has an RGB port other than the 2 HDMI ports.
I have tried both HDMI ports.
I tried turning everything off, unplugging everything waiting 10 seconds, reconnecting everything and turning the mac mini on first, then the tv AND vice versa.
Nothing.
My HDMI cable was kind of old so I went out and bought a new one from Belkin.
Nothing.
It does look like the TV is recognizing the device because it does not say "No signal", so it seems that the mac mini itself is not recognizing it.
I just bought this thing, it has not even been setup yet!
And I do not have another moniter here to hook it up to.
I tried calling Apple Care, but I called at 7:30 waited for 30 minutes for someone to tell me they were transferring me to tech support, then the phone rang for 10 minutes. I hung up and called back and they said the office was closed!
I am a die hard mac user, but I am at my wit's end here.
I guess my next step is to take it to the genius bar?
But I wanted to see if anyone out there has any suggestions/ideas?
(I know there are other discussions out there about this, but nothing I found actually helped my situation.
Thanks everyone.I just got my mac mini as well and I'm having the same problem with my HDTV. Unfortunately I am not at home so I do not have the tv model on hand but it is a Panasonic from 05/06. I am trying to connect from the HDMI on the mini to the HDMI port on the tv and when it boots up the grey start upscreen shows up on the tv and loads for alittle bit than everything goes black. Any ideas?
-
Sony KDL-50W800C will not auto setup and Sony does not provide any manuals beyond a primer.
Sony, once the most trusted name in Electronics has certainly dropped to the bottom of the list. I can't get my TV to work properly and the call center in the Phillipines is useless. They don't speak English and don't dare try to get them off script. Everyone that I have contacted has tried to steer me th the call center again. No Thanks! It looks like my option is to call the Geek Squad and pay them $150 to make a house call and set this thing up. Now after paying $799.99 plus tax why should I have to pay a third party to do Sony's job?Don't buy Sony!!!!!!!!!!!!
Just for sake of completeness: https://bbs.archlinux.org/viewtopic.php?id=132901
The suggested workaround solved my problem for now. -
Toshiba Regza does not display PC connected through HDMI
I live in a flatshare in which there is a Toshiba Regza in the living room.
This television is connected to a Virgin Media V Box through an Xbox HDMI cable.
I tried using the same cable to connect the tv to my laptop, which has a HDMI port, but nothing shows up on the screem.
I checked in yhe Nvidia control panel and on the computer's screen settings: the Toshiba-TV is successfully recognized, so why I cannot see anything?
The V Box is usually tuned on the HDMI-1 channel, but all I see there is a blue screen. Same on HDMI-2.
The PC channel is instead black.
Can somebody please help and tell me what I am doing wrong?What model is the TV?
- Peter -
I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?
Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled. -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size
I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
The games work fine in every other way, it is only this small screen size which is driving me nuts.
I hope that someone can help me with this!!Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
Secondly, if it is the newest one then why will it not install on my computer? -
The menubar will not display in full screen
Hi.
I have a strange problem in fullscreen mode, on my Macbook pro 15"
I LOVE fullscreen, and infact the next macbook I will get is the 11" air because of its size and because full screen is so nice to work with.
But I have a strange problem which I can't find a solution for.
Suddenly the menubar will not display it self when I move the mouse to the top of the screen. The only way I can access the menu bar is by exiting full screen (ctrl + Cmd + F) and the toggel it back on after I have used the menubar
This actually makes fullscreen mode useless and its driving me nuts, because this should not happen on Apple software. I would expect these sorts of behaviour on windows but not in osx.
Anybody have a hint about what to do?https://discussions.apple.com/thread/3881124?start=0&tstart=0 <<<<< GO THERE
Try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences. -
was recently sent a very large emoji message amd now when i try to acces messages it will not display mesagges and then will bring me back to the home page
Quit the messages app and reset your phone.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it jiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart.
After the phone restarts go into Messages and delete the thread containing the problem message. -
1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpgYou can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will not display to the screen when I click on icon. When it happens I cannot display other programs. I specifically say display because I believe Firefox has started. To circumvent the problem I installed Process Explorer on both machines and start this program first then click on Firefox icon. When problem occurs I can see Firefox.exe process in Process list; some CPU consumed but, then, no CPU activity. If I click on Firefox icon again another process opens in Process list but with same response - some CPU consumed and then no CPU activity. If I have 2 processes running and kill the 1st process, the 2nd will display and everything from then on is normal. If I do not open a 2nd process but kill the 1st process then click on Firefox icon Firefox is displayed and everything from then on is normal. This problem has occurred since original installation on both new machines. I've updated video drivers in both machines.
Ok, let's see if we can fix this and get it working for you!
First, if you start Firefox in [[safe mode|safe mode]] (restart your computer first, then when you open Firefox, hold down the shift key) does it start up more reliably? This is usually caused by a faulty add-on. If it does help, then restart Firefox, go into the Firefox button, then add-ons, and disable your extensions one by one until you find the trouble maker.
Also, try updating to Firefox 11, it has several bug fixes that might make life easier here.
Just as a few basic troubleshooting steps to make sure we have all the bases covered,
Run all Windows Updates, install all needed service packs, etc.
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections. -
Since latest update...Firefox will not allow a new page to be opened from a link in a current page. It will allow a new tab to be opened (with tabbed browsing checked) but i prefer a new page. Even in tabbed browsing links to things like a pdf will not work at all.
Firefox WILL NOT close. X-ing out will close the window but I can not get back to Firefox without closing it in task manager.
Firefox will not display my chosen home page without clicking on home icon.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Adobe Illustrator file will not display correctly when logged in as a user
I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.
After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem! -
Photos show up as thumbnail but when I click on them they will not display
Photos show up as thumnails but when I click on them they will not display. I get a exclamation mark in a dotted line box
Hylan:
That occurs when the library has lost the link to the original file. This is a result of a damaged library database file, Library6.iPhoto. You can try rebuilding the library from within iPhoto to see if you can recover the photos by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. However, it's iffy.
You can rebuild the library with iPhoto Library Manager as it create a new library, leaving the original one intact, by reading the AlbumData.xml file and copying what it needs. You will be able to recover the photos, albums, keywords, titles and comments. However, books, slideshows, and calendars will not be recovered. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
It that doesn't work you'll have to start over with a new library and import the Originals folder from the old library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Edit Photo dialog box will not display
When I select edit in CS5 my file goes straight to CS5 and my edit in the dialog box will not display. I have no way to oprn with a copy or etc with out the edit dialalog box.
Iam using LR 4 latest version I must have changed some thing no realizing . Everthing was fine until a while ago.
All the NEF files that were recently imported are the ones that the dialog box will not show the TIF files the dialog box will show.
When these files were ompoterted all the history does not show in the module just the import. Did I import wrong causing all the history not to show??
Thank you
Dick
Message was edited by: [email protected]
Message was edited by: [email protected]Hi Dick,
That sounds like normal behaviour with Raw files to me. They usually go straight through the Camera Raw pipeline into Photoshop. Rendered files like Tiff and Jpeg have the Original/Copy/Lightroom Adjustments dialog.
I'm not sure what you mean by History because on Import, there is only one history state: Import.
Sean
Maybe you are looking for
-
My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate
-
I've installed the latest Indesign CC from Creative Cloud, it can not start, it always throw errors and quit. here is my OS : Mac OS X Lion 10.7.5 (11G63b) Please Help i can't work ! Thanks Here are the errors thrown : Process: Adobe InDesign
-
Fetching 3 laks records from the database
Hi All, I have a requirement that if we are fetchin 3 lakks records from the database, can we fetch the records in a single span of time ,if yes then how? If no, then we have to fetch the recods multiple times but since for the first time it is fetch
-
Line weight changes when using Align to Pixel grid
When I select Align to Pixel Grid in the Transform Panel, I see line weight changes occur. I try to change the line weight in the either the Stroke or Appearance panel and it will not change, no layers locked, any ideas how to change the line weight?
-
Securing REST based Webservices using OSB
Can anyone please lead me to any pointers on securing the REST based webservices. Thanks, KC