Sony kdl-52xbr9, Flickering on left side

This TV (Sony kdl-52xbr9) is 1 year 7 months old. I did not buy the extended warranty the day i purchased the TV. I was sent an offer thru the mail from bestbuy (Geek Squad) a month or 2 after i purchased the TV thats when i drove to my local bestbuy and purchased the extended warranty.  How can i go about getting my TV repaired as no longer have any of my receipts? Please Help. Would like this serviced before it gets worse.
Thanks
Peter

Call 1-800-GeekSquad. They can get your reciept information from their computers.

Similar Messages

  • I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me.

    I am trying to set up my apple tv on a sony KDL - 40xbr4. The remote is a sony RM-V302. I plugged it into the HDMI IN on the side of the TV but cannot find out how to get to that input. I am at a winter rental property and brought my Apple TV with me. I did check internet for solutions. The instructions I found said to use a "home button" on the remote.  There isn't one. I sure would appreciate help if someone knows a solution.  My first post - hope I did this right.

    if its anything like my Sony, theres a button top left corner that upon each press i get an audible bleep and the AV inputs come up on screen, i then cycle down to whichever input i wish to select!
    in case your remote is different, the button on my remote has a square with a slightly smaller square just overlapping the first square.
    hope that helps?
    rgds Lee.

  • IMac display monitor problems, left side darkens and flickers

    I have an iMac with 2.7 GHz Intel Core i5, 16 GB 1333 MHz DDR3,  AMD Radeon HD 6770M 512 MB running Mac OS X Lion 10.7.5 (11G63). The last year the left side of the monitor was flickering intermittingly. I didnt think much of it. Then in July, one big flicker caused the left side of the screen to darken slightly. Fortunately, my AppleCare was still in effect,. I contacted Apple and they had me zap the PRAM and also reboot into Recovery mode. The darkness was still apparent. So I took it to an authorized dealer and they fixed the display. Now tonight, one big flicker happened and I noticed that the left side had darkened a little again. I zapped the PRAM and it seems to be ok now, but I'm afraid that the same thing will soon happen. And of course the AppleCare has expired finally. Has anyone encountered this?  I have four external hard drives on a shelf right next to the display. This sounds silly, but could they be affecting the display in any way? I moved them a few feet below where they were, hoping that they werent the cause of the problem.
    Any advice would be most welcome.
    Thanks!

    had zapped pram not helped then I would had said that the lcd panel itself was close to the end of it's life and replacement would be required but since it did then I have no real cause to believe the issue would come back

  • There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

    There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you try to repair the phone software using PC Companion..
    Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
    How to backup?
    If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Left side of 27" iMac going dim after less than 2 yrs...aaarrrggg

    left side is flickering and now it just stays dim......I have enjoyed the imac and like it bright......hopefully this is an issue than should be fixed due to so many people complaining about it...I do not have $500 to get it fixed every 2 yrs...anyone else having this issue?

    thanks I have an appointment for this thursday so we will see what happens...hopefully it will not bust my wallet...I wish I had known I had a year to get apple care..my bad for not looking close enough.....as I am typing the whole left side went way dark......crossing fingers
    thanks again
    Chuck

  • Part of left side of screen is black

    I bought this mac through ebay some time ago now. After a few months of use, i noticed the left side of the screen flickering/twitching. It gradually got worse till the majority the left side of the screen was completely distorted. Now, there's a dead space there, and when i take a print screen, the image comes out fine.

    Hi,
    Sorry for late response, I'm not sure if you have resolve the issue by now. From what you are describing there can be only 2 things wrong : 1 - video card or 2 - the logic board now if you are in my area (orange county, CA)I could help you do the hardware repair so you save some money, otherwise Apple will charge you almost as much as getting another one, for fixing issue like this...
    Or if you are handy with hardware repairs try to get another part and swap it your self.

  • Left side touch note working - took back up with PC companions - repaired with SUS - restore of contacts etc failed - restore error - touch still not working ..... Experts can i get some help ?

    Hi Guys / Experts / Arnab,
    The left side touch of my phone screen was not working. Was not able to type numbers 1, 2 and alphabets Q, W etc.
    I repaired with SUS after taking back up with PC companion.
    While restoring the backup, i got RESTORE ERROR, and almost everything got restore except few apps and CONTACTS, which is the most important thing in a mobile .
    ---> TOUCH IS STILL NOT WORKING <----
    Guys can i expect some help here ?
    Regards,
    Sush
    Solved!
    Go to Solution.

    I see
    this might help
    http://talk.sonymobile.com/message/448070#448070
    https://github.com/nelenkov/android-backup-extractor
    SO HERE IS HOW YOU CAN RESTORE YOUR DATA:
    Get your Fullbackupdata-Contactfile.
    1.  First go to your backupfile: (C:\Users\YourUserName\Documents\Sony\Sony PC Companion\SomeNameDependsOnLanguage\
    2. Make a Copy of your backup-File (crtl+c, crtl+v)
    3. We want to change the file extension, so make sure you see it. If you don't see a .dbk at the end of your file, go in the explorer window in the left upper corner on organise -> Folder and search options. Change to view and then deselect "Hide extensions for known File types"
    4. Rename (F2) the file to backup.zip
    5. Open the zip with 7zip or something similar.
    6. Navigate to Applications\com.sonyericsson.android.contactsimport and get the fullbackupdata file which is lying in this folder.
    7. Put this file on your Desktop.
    8.Download this jar-File: http://ge.tt/64TJmne/v/0?c
    9. Put the .jarFile also on your desktop.
    10. Doubleclick the .jar-File. After a few seconds a new file with the name "restore.tar" should show up (If not check if your fullbackupdata-File really has the name "fullbackupdata" and is on the desktop)
    11. Open the .tarfile with 7Zip
    12. Navigate to restore.tar\apps\com.sonyericsson.android.contactsimport\f\
    13. Copy full_backup_vcard.vcf to the Desktop.
    If everything worked you're finished, you can open this .vcf File via Windows-contacts -> import or put it directly on your phone and import it there (open Contacts. Settingsbutton -> impot)
    If you don't trust my .jar file, you can also download the github-project follow their orders and compile it yourself.
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • How can I display all bookmarks on left side of window without opening library?

    I usually have a bookmarks view (NOT the toolbar) open in the left side of the Firefox window. It shows all my bookmarks, much as the library view does, but not in a separate window. After Firefox crashed, I restarted a "new session" and the bookmarks were not visible. The help files only talk about the bookmarks toolbar, not what I'm looking for.

    You can open the Bookmarks in the sidebar via View > Sidebar > Bookmarks (Ctrl+B)<br />
    Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    You can find toolbar buttons to open the bookmarks and the history in the sidebar in the toolbar palette and drag them on a toolbar.<br />
    Firefox 4 has two bookmark buttons with a star in the Customize window.<br />
    One star button has a drop marker that open a Bookmark menu.<br />
    The other star button without the drop marker opens the bookmarks in the sidebar.<br />
    <br />
    * http://kb.mozillazine.org/Toolbar_customization

  • Is there a way to open the right click menu on the left side of your pointer?

    Whenever I try to right-click an object that's located on the right side of the screen, the pointer always automatically click whatever entry in the right-click menu which just happens to be under the pointer the moment the menu is opened. I noticed that the reason this happens is because the right click menu always forces itself to open on the right side of the pointer, and when there isn't enough space, the right-click menu will open underneath the pointer. Since this is horribly inconvenient, is there a way to open the right-click menu on the left side of your pointer?

    Are you saying you have an icon on the far right side and when you rt click on it, your pointer ends up opening wherever it lands? That is a two step process, or normally should be at least a two step process. Do you have a Mouse in your Control Panel? You should check, because there may be some properties with which you can play. For instance, I can switch primary and secondary functions on my mouse buttons by checking a box.
    When I rt click on right side, the menu opens on the left.
    When I rt click on left side, the menu opens on the right.
    In order for me to take an action, I then have to move to an area in that menu and click.
    I hope I understood your question correctly.

  • My vertical column of bookmarks down the left side of my screen has disappeared and I need to find a way to get it back in the same place.

    This is purely a lay-out issue. We used to be able to choose to permanently display our bookmarks vertically down the left side of the screen, and I want to continue to be able to do so. My bookmarks are not lost; I know they are in my library. But the system doesn't seems to allow me to leave them on permanently down the left side. Please help. I have Windows 7 64-bit and the latest version ofFirefox.

    Do you mean that the bookmarks sidebar (View > Sidebar > Bookmarks) gets disabled?
    Try:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • Move negative sign (minus) to left side of value in gui_download

    Hi,
    While downloading data using gui_download I want to bring the negative sign to the left side of the value. Is this possible?
    Regrads,
    Madhu

    Hi,
    Use FM
    CALL FUNCTION  'CLOI_PUT_SIGN_IN_FRONT'
    Regards.
    Eshwar.

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • Mini-DVI to s-video: black bar on left side

    Hi,
    When outputting video through "the mini-DVI to s-video adapter" i have a black bar on the left side of my television.
    It seems like the 1024*768 resolution is not able to completely fit the 4:3 area of my television (the image is to small).
    any ideas?
    thanks!

    I'm absolutely sure everything is displaying and that the image is not deformed in any way.
    So my conclusion is that the image is just smaller (in every dimension) than it should be and than it was before.
    I will try a lower resolution later today.
    thanks for your help and interest!

Maybe you are looking for

  • Netweaver 2004s installation problem on Windows: Oracle 10G

    Hi Friends, I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it. The server has 6GB RAM and has 5GB of free space on C: and a free sapce  of 60GB

  • Trying to transfer photos from mini sd card via adapter to iPad but get there are no photos message

    Can anyone help, I am trying to transfer photos from a mini sd card via a apple adapter but get a message telling me there are no photos to transfer. Any ideas on a fix? Graham1955

  • DVD/CD Drive Not Working

    Just got a new iMac i7 and the dvd drive doesn't read any disks when they are inserted into the drive. They just spin for a while then the drive spits it out...it never mounts or opens itunes or iphoto. Anyone have a similar experience and if so, any

  • Pb with XML SQL Utility

    I use XSU to generates a document xml with data results from a query. I want to change the structure of data of this document, so I use XSLT. The method XSLProcessor.processXSL needs to parameters a "Stylesheet" and a "XMLDocument". The problem is th

  • I need help transfering music from my Zen Sleek to my computer, ple

    Ok, so I updated the firmware on my sleek, and when i got to the Media>Music Folder, I can't transfer any of the songs by drag and drop. The files have no name and it just won't let me transfer. Is there any way/software I can use to do that? Thank y