Sony kv-32510hs and apple tv
Has anybody out there have this combination?? I want to buy apple tv but don't want to find out that I have to send it back because aple tv will not work with this model. I can use either DMI or component.
Welcome to the Discussion Forums.
Don't have one I'm sorry and am unable to find out anything about this model on the internet. If it has HDMI or component (R,W,R,G&B coulored connectors) and is 16:9 then it should be good to go.
Similar Messages
-
Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???
Hi jcm2656,
iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
iMovie '09: Camcorder Support
http://support.apple.com/kb/HT3290#1
iMovie ’11 however, does support it. See this article -
Apple - iLife '11 Help - iMovie ’11 Supported Cameras
http://help.apple.com/imovie/cameras/en/index.html
Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
Thanks for using Apple Support Communities.
Best,
Brett L -
Hi have just bought a Sony Xperia J and am not able to tether my ipad as I did with my Nokia C3. Why?
What do I have to do to solve the problem so I can tether to my Ipad?
Is this phone another of the things that Apple does not support? How do I know before I buy a phone that it will be supported?How are you attempting to connect them?
Looking at the Experia J features it does seem to support Wifi Hotspot, but there is no mention of a Bluetooth hotspot. Different phones offer different things.
The iPad issues the message, because there doesn;t seem to be anything it can do with it. But this is not something apple is blocking its more a limitation or a non present feature of the phone.
From the Manual which I assume you've read through:
To share your phone’s data connection as a portable Wi-Fi® hotspot
1 From the Home screen, tap .
2 Find and tap Settings > More… > Tethering & portable hotspot.
3 Tap Configure Wi-Fi hotspot.
4 Enter the Network SSID for the network. Tap the Security field to select a
security type.
5 If required, enter a password.
6 Tap Save.
7 Mark the Portable Wi-Fi hotspot checkbox. The phone starts broadcasting its
Wi-Fi® network name (SSID). You can now connect to this network with up to
8 computers or other devices.
8 Unmark the Portable Wi-Fi hotspot checkbox when you want to stop sharing
your data connection via Wi-Fi®
When that is set up, you can use your iPad to look for the Wifi network the phone is providing and connect to it as you would any wifi network.
http://www-support-downloads.sonymobile.com/st26/userguide_EN_ST26_1268-7245.1_A ndroid4.0.pdf
http://blog.clove.co.uk//wp-content/uploads/2012/11/Sony_Xperia_J_ST26_User_Guid e.pdf -
Hi. I am a fairly new iMac user. I have a Sony handy cam and my daughter has a canon video camera. Both are fairly new. Is there a way to get the videos onto the iMac with the memory card or USB? Unfortunately the cameras were bought before the computer-I never would have thought Sony wouldn't be compatible with a Mac. Thanks for any help!
What is the specific model of camera and how are you connecting it (Firewire or USB)? What version of Mac OS X are you running? And what capture application are you using, iMovie or something else?
BTW: Since you're new to the Discussions, here are some general tips for getting the most from the forums:
- For future question posts, please fill in the Apple ID Preferences in your Discussions Profile with complete information about your system (exact model, RAM, hard drive space, OS and level, etc.). Then be sure to check the Show information about your computer box below the text input field when you create a message. If you have more than one type of system, include the same information as appropriate to the system you're asking about in the body of your post. By providing complete information on your system, others will be better equipped to help you resolve problems.
- Please be sure to read the forum FAQs and do a search for your topic both in the KnowledgeBase and in the Discussions forums (try at least a couple of different keywords) to see if your question has already been addressed before you post a new question. It may save you waiting time, and will help keep the forums from getting cluttered with redundant posts.
- To reply to a post, please use the "Reply" button next to the message (the arrow button, second from the left), not the "Post Message" link. -
I have an older Sony digital camcorder, and I am having trouble importing the movie files. Sometimes I get the audio in iTunes without the picture. I have a Pinnacle Dazzle interface. What am I doing wrong. Is there a way to skip the dazzle device?
Chances are the pinnacle is producing .avi files or MPEFG1/2 streams - iTunes may know how to decode the audio but not the video. Download Handbrake and try running the Pinnacle files through it and adding to iTunes - use Universal format unless you have a specific device in mind.
Keep copies of the originals.
Another option might be to try to install Perian. Can't remember if the Apple MPEG2 plugin allows MPEG2 to be played in iTunes.
AC -
Has anyone here exported to both idvd and apple tv?
I have 10 1 hour projects in imovie and I am really debating on buying an apple tv to view these or just burn to dvd single or dual layer (whole other question I have), if you have done both please share with me which will be better in quality, original footage was analog 8mm tapes (home movies).
I was interested in apple tv because I'd like to get away from tapes and discs altogether however I have a new 60 inch sony 1080p tv and would like to enjoy the movies of my kids with the best quality, if that means this lazy old guy putting in a disc, so be it.
If apple tv is equal or superior, please share the settings for the best quality.
Thankshttp://www.apple.com/appletv/specs.html
You'll get a better looking picture exporting to Apple TV as its dimensions are larger then those found in SD DVD formats.
Since your original source was not HD you may be better off burning to DVD (at the smaller dimensions). -
Sony minidv cameras and intel macbook stop talking after firmware update
i think there must be an issue with a driver conflict between sony's camcorders and the latest intel firmware update. three sony mini dv cameras fail to be recognized by final cut pro or imovie. i have no such issue with canon minidv cameras. any info on where to get an updated driver? sony doesn't seem to support anything other than microsoft systems. thanks in advance.
Try resetting the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
Oh and tell Sony the next time they tell you they don't support Mac that the following is true:
1. Their president came to Macworld 2004 to introduce new products for the Mac and a collaboration with Apple. I was there and saw it.
2. Their music is being sold by the iTunes Music Store
3. They have Apple to thank for iLink, as iLink is actually Firewire.
Suggest to them to reconsider their position. As Mac users won't support them if they won't support Mac users. -
Why are Sony headsets incompatible with Apple hardware?
Hello,
Close to one year ago, I had to get my iPod touch 2G replaced due to a defective headphone jack. One staff member at the Apple store told me that Sony, Skullcandy, and some other brands of headphones have a slightly larger plug which wrecks the jack on iPods over time because Sony and Skullcandy (among other brands) have headphone jacks that are just slightly larger than the others. This seems like a reasonable explanation to me.
What I'm wondering is: is this slightly larger jack size exclusive to only a few brands, or does it extend to all brands except Apple's own earbuds? (which would be ridiculous) Secondly, why does this problem occur with ALL Apple hardware, including their computers? (My iMac G5 has the same issue my old iPod touch did.) Do the engineers at Apple not realize that Sony headphones are the choice of not only many home users, such as myself, but also many respected creative professionals around the world? Seeing how Apple hardware is used extensively by these "creative" professionals, such as musicians and music producers, what exactly is the reasoning for making Apple hardware incompatible with these jack sizes? Is there any work around for this incompatibility, such as some kind of headphone adapter I can pick up at Radio Shack?
Since I know that some users here will inevitably believe that I am thick-headed enough to confuse 1/4" jack with the 3.5mm variety, allow me to make it explicitly clear that I am not trying to somehow use a 1/4" jack with my iPod! (that is not even physically possible...)
Also, if anyone knows where I could contact Apple for some sort of official statement of this matter, I would be quite grateful.musicmannn wrote:
One staff member at the Apple store told me that Sony, Skullcandy, and some other brands of headphones have a slightly larger plug which wrecks the jack on iPods over time because Sony and Skullcandy (among other brands) have headphone jacks that are just slightly larger than the others. This seems like a reasonable explanation to me.
Well it doesn't to me.
What I'm wondering is: is this slightly larger jack size exclusive to only a few brands, or does it extend to all brands except Apple's own earbuds?
In which case, that would suggest that the Apple jack is smaller than every other make, not that everyone else has a larger "plug". But I don't accept "a difference in size" as any sort of explanation. In fact, I think such an explanation is complete rubbish!
Other than that, I agree with Kappy, why would you post a problem about a Sony product on an Apple forum?
What can happen though, is that the back end headphone plug (the bit you grip to remove the plug) can be pushed against other objects when the iPod is in your pocket or bag and then the business end of the plug (the front bit that goes into the socket) is levered over, pushing the headphone jack over as well, and that causes the connection between the socket and the circuit board to break. Hence the problem.
The solution (to minimise the risk of broken headphone jacks) is to ensure that the plug cannot be pushed over while it's in your bag or pocket. I purchased a right-angled 3.5mm adaptor (http://www.keene.co.uk/electronics/multi.php?mycode=KA178) which reduces strain on the socket. In additon, do not leave the plug inserted with the headphone cord wrapped tight around the device when you're not using it, because once again, that will strain the connection inside the iPod.
Phil -
Home Sharing no longer works between iTunes and Apple TV.
I've been through all the forums, tried all the solutions provided and I have come to the conclusion that Home Sharing just no longer works between iTunes on a PC and my Apple TV. Does anyone know if this issue will be addressed or should I list my Apple TV up on eBay? (along with my iPad, iPod, and iPhone, since all system no longer sync together as before.)
My issue:
My iTunes library is no longer listed under "Computers" on the Apple TV.
The airplay icon no longer shows up in iTunes. (Version 11)
I cannot play music/content from my iPhone or iPad via remote that is stored in my iTunes library through my Apple TV.
I can however play music/content that is stored locally on my iPhone and iPad through my Apple TV.
My firewall settings are allowing access to Apple TV.
After logging into my router, I see no issues there.
I've logged in/out, turned home sharing on/off, de-authorized/authorized, and restarted my PC, Apple TV, and Router.
All devices are logged into the same iTunes account, and are on the same wireless network.
Time for a solution Apple.If you turn off wifi on your Computer and connect it to the apple tv using an ethernet cable can you see your library under computers in Apple TV.
If yes the issue is with your wifi not the Apple TV
You may want to try the troubleshooting article
I also found this article
iTunes Home Sharing Not Working
Not working and sometimes when it is working, it cuts out in the middle, or when you click on the computer name, the focus goes away from the library. In other words, really weird.
What it is
iTunes has a feature called "Home Sharing" - it basically allows you to share your entire or part of your library with other instances of iTunes in your home network. It requires you to login to your iTunes account on both computers. A typical scenario is to enable Home Sharing on your desktop machine and then access the library from your iPad, Apple TV, iPhone, Mac, etc.
In my case, I have iTunes on my desktop machine running Windows XP in the attic with Home Sharing enabled and then I access the library from my Macbook and Apple TV, depending on what I want. How to use Home Sharing can be found here.
Symptoms
Home Sharing machine not showing up in Apple TV or the Macbook
The Macbook home sharing not showing up on my desktop
Home Sharing working intermittently
Connections getting cut of intermittently
Usually, restarting iTunes or the desktop computer will make things work.
Sometimes, restarting the Macbook or the Apple TV will make things work.
The "working" doesn't last long
The FixOn the desktop computer where the Home Sharing is enabled, I disabled the "QoS Packet Scheduler" from the network connection:
Open Control Panel
Open Network Connections
Right-Click on your connection (in my case, it was "Wireless Network Connection 4"
Select Properties
Uncheck "QoS Packet Scheduler"
Click OK
Restart iTunes if necessary
After doing the above, Home Sharing worked like a charm. -
Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2
/dev/disk7
#: TYPE NAME SIZE IDENTIFIER
0: *121.9 GB disk7It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
=========================================================
Name: fusion
Status: Online
Size: 1120333979648 B (1.1 TB)
Free Space: 114688 B (114.7 KB)
|
+-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 120988852224 B (121.0 GB)
|
+-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 999345127424 B (999.3 GB)
|
+-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
Disk: disk2
Status: Online
Size (Total): 1111826497536 B (1.1 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion
Volume Name: Fusion
Content Hint: Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 999.3 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion *1.1 TB disk2 -
I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times. -
Unable to Sync i-Tunes and Apple TV
Hello. I am writing about my inability to sync i-Tunes and Apple TV. I have read a variety of posts in this forum regarding other users' problems with the same issue and have been unable to solve my own based on recommendations, including exchanging my Apple TV for a new one at my local Apple store, which I did.
My Apple TV is linked to my computer through a Linksys wireless router. The Apple TV is able to connect to the internet as demonstrated by its ability to download movie trailers, access YouTube, and get its software updated. It appears in my i-Tunes (version 7.5.0.20) devices list, but each time I click on sync, nothing happens. I get an error message about opening port 3689 because but that port is not blocked. I've shut down my TrendMicro "PC Cillin" firewall and the same message comes up.
So in sum, the Apple TV can link out to the internet but not back to my i-Tunes. Both are running latest software versions. Here's the best part, before I moved a few months ago to my current home, both worked and communicated fine! After I moved and hooked everything back up the way it was, Apple TV didn't work the same (i.e., did not sync with i-Tunes). Thinking it was a problem with Apple TV, I exchanged it for a new one recently. But the new one has the same problem, so it's not the Apple TV unit.
Any help would be much appreciated.
Thanks,
Ronin703
Following are i-Tunes diagnostics notes (everything works fine):
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
IBM 288692U
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-08 20:36:02.
Video Display Information:
NVIDIA GeForce FX Go5200
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {D37BCF82-D40B-4D6C-B3F5-CA69BFEB857E}
Description: 11b/g Wireless LAN Mini PCI Adapter - Packet Scheduler Miniport
IP Address: 192.168.15.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.15.1
DHCP Enabled: Yes
DHCP Server: 192.168.15.1
Lease Obtained: Sat Dec 08 11:50:16 2007
Lease Expires: Sun Dec 09 11:50:16 2007
DNS Servers: 192.168.15.1
192.168.15.1
Adapter Name: {0F331AA6-8F06-4491-BE96-BD3DE6F99C04}
Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 10.42.2.1
Lease Obtained: Fri Sep 07 10:37:17 2007
Lease Expires: Sat Sep 08 10:37:17 2007
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.I had the same problem. I doubt it is the firewall software on your cpu but rather then one on the router itself. On your linksys control panel, go to applications and on the port list enter 3689 to 3689, enter the ip address for your appletv (you can get it from the apple tv or from the DHCP client list under the status tab on the router). Click enable then update. Or, you can simply disable the firewall on the security tab of the router but I would not recommend this. Even after updating, I had to unplug the apple tv to reboot it and then it worked fine.
-
By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.
A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).
-
I'm a new user of an iPad. Before my PC had iTunes (it does now), I loaded Aps from from the iStore using my daughter's PC with my iPad cable-connected. I indicated my email address and Apple password--not hers and paid for these Aps--receipts arrived via my email. Now I want to upgrade to 5.1 but the Aps now loaded on my iPad do not show up on my PC iTunes library. When I click 'Upgrade' I get a warning message that says all Aps currently on the iPad will be obliterated in the process which of course I don't want to have happen because they're not showing up on my PC which presumably means my PC is not aware of what's on my iPad. Do I have to buy these same Aps again to keep them if I'm going to upgrade to 5.1, and how do I get my iTunes on my PC to back up the Aps currently loaded onto my iPad?
You should be able to copy the apps (and any other iTunes purchases) over to your computer's iTunes via File > Transfer Purchases. And as long as apps remain available in the store, and you use the same iTunes account as you originally used to purchase them, you should be able to re-download them in the future : http://support.apple.com/kb/HT2519
If you are already on iOS 5+ on your iPad then you should be able to update the iPad directly on the iPad via Settings > General > Software Update . -
MIDI Banks and Apple Loops Trustworthy Downloads?
I am currently attempting to locate and download MIDI banks and Apple Loops that I can use in the future, but I'm looking for a trustworthy site (a one stop shop if you will) to do this. If we only have Garageband installed, and not Pro Logic or any other programs, then is Garageband the only program to open up and play around with our MIDI banks or Apple Loops just for fun? I mean, is there another way we can open our loops simply to play around with and be able to pick out sounds we like, then perhaps save different sounds we like for future reference? I'm confused on how to actually open the loops and MIDI banks, so I need someone to tell me precisely how to do this if we just want to begin exploring. Thanks!
You can open Apple Loops in the Quicktime Player. Many sample producers offer their libraries in Apple Loops format as well as the more traditional standard WAV nowadays, so you should have no trouble finding plenty of resources.
Quicktime Player will also play GM MIDI files.
Maybe you are looking for
-
Adobe Builder 4.7 Serial Number does not work
Hi, I followed the instructions to download and install the Adobe Builder 4.7 Beta @ http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7. The Serial Number mentioned for the product (1424-4002-6183-5974-1150-0356) does not work
-
Probem connecting a server when using VPN
Hi, I am new to Linux. I installed a new Oracle Linux server and was able to connect to it from my laptop using putty when I am inside my office. I have static IP on the linux server and everything seems to work fine when I am in the office. However,
-
when sending attachment in email the image is so large it takes up the screen, how do i make it normal, when sending attachment in email the image is so large it takes up the screen, how do i make it normal
-
HT5312 What if i forget my rescue email?
So i forget what my security questions where since I made my accound over a year ago and i cant remeber my rescue email because i had made so many. Is there any other way i can purchase items or find out my rescue email? PLEASE HELP!!
-
Programming paragraph styles using the Javascript
I am exporting xml into a indesign template and then creating a .jpeg programmaticatlly. On conversion, is there anyway to format the xml so that paragraph styles are applied?