Sony MDR V-6 Headphones

Has anyone discovderd these amazing headphones? They run sold on as little as .5 watt of power. I'm unsure if Sony still makes these but B&H still have them for $60. I alwauys loved the sound of the Eytomotic ER-6 earplug phones, but at full ipod volume my tired old ears could barely hear them. I find myself not even turnning the shuffle all the way up. I still wonder is these are still made of I found a wonderful new leftover.

Unfortunately, we can't tell if the MDR-RF925R Headphones will work with an HDMI-converter box as we have not tested it. However, you can always try the connection to see if they will work.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

No sound in right ear with Sony MDR-NC31E bundled headphones

Hi, I bought the phone with bundled noise cancelling headphones and they worked flawlessly. Since then I've applied 2 updates from Sony and when I went to use my noise cancelling headphones after not really using them (I usually prefer my Sennheisers) I have no sound in the right earbud.
If I plug it into any regular 3pin 3.5mm jack it's fine, I have sound in both channels, and plugging other headphones into the Z2 gives me proper stereo too.
Seems to be a problem when the Z2 noise cancellation software and the noise cancelling headset try to play together.
Any thoughts? It's only happened recently.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Please try carefully cleaning the headphone jack with something soft such as a cotton tip.
What are your thoughts about this forum? Let us know by doing this short vsurvey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Carrying case for the Sony MDR-V55 DJ headphones?

Does Sony sell any or does someone recomemend a 3rd party seller?

Contact our Sony Store team to check and order carrying case for the Headphones.
http://esupport.sony.com/US/perl/model-accessories.pl

Sony MDR-1RBT headphones have crackling or pops in audio when using bluetooth on my iMac - Mountain Lion

I notice crackling noise or pops when I listen to music using my Sony MDR-1RBT bluetooth headphones with my 3.4GHz Intel Core i7 iMac running OSX 10.8.5
I do not hear the crackling when I listen to the headphones using my MacBook Pro 2.7GHz Intel Core i7 with OSX 10.8.5
I also do not hear the crackling when using wired connection to the headphones.
So it would seem that something with the Bluetooth on the iMac is the problem. But I have no idea how to troubleshoot this further.
Does anyone have any ideas what the cause may be?
I am pretty sure that it is not interference from another device because I can connect to my MacBook Pro in the same area as my iMac with no crackling

Hi Michael Erb1,
Thanks for using Apple Support Communities. It may also be worth resetting the NVRAM of your iMac to see if that helps with the crackling:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
- Ari

Sony MDR-1RBT with Samsung Galaxy Tab 2?

I've successfully paired my new Sony MDR-1RBT Bluetooth headphones with my Samsung Galaxy S3 phone. However, I can't get them to pair with my Samsung Galaxy Tab 2 tablet. Are they compatible?
I held the button for 7 seconds until I heard the sound and the red/blue lights flashed. The Galaxy Tab was discoverable but never found the headphones. I tried restarting the tablet, restarting the headphones, etc.
Any suggestions would be appreciated - these headphones were too expensive to not work with all my devices.
Solved!
Go to Solution.

I figured this out today - I realized I had to hold the power button long enough to see a red flash and then keep holding until I hear a second tone and a red/blue flashing. The unit paired right away when I did this. Thanks!

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other devices. I haven't moved to ios7 yet. Any ideas?

After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?

What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

Sony MDR 1R Headphones compatability with Lumia 92...

Hi
Would you have used the Sony MDR 1R Headphones "wired type" with Lumia 920, using Sony supplied iPhone cable. If the phones work with headphone connection on the 920. Cheers
Mobiles sure aint what they used to be. They get better

I would not know why not, but I have neither the 920 (use a 620) nor the MDR 1R headset (use SOny earbuds or a set of MDR V700 cans which sound just fine to me
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Instantaneous hearing loss using a pair of Sony MDR-7506 headphones

Hello Sony, I am posting here to inform you of a life changing event which occurred June 5th while I was producing music with my Sony MDR-7506 headphones on my mid 2012 MacBook Pro. Long story short, after years of listening to music at low volume levels and being proactive about the maximum output of my devices, I was accidently exposed to three very short blasts of 115 dB SPL noise (less than a second of time total) from my headphones which has given me permanent low frequency hearing loss in my left ear, persistent tinnitus and hyperacusis. I'd like to mention that the documentation which came with the headphones states only the following precaution related to hearing loss: "Avoid listening with your headphones at so loud a volume that extended play might affect your hearing”. The documentation says nothing regarding the possibility of instantaneous hearing loss, and I believe this is something that should be mentioned in an effort to keep users informed. I was not using any speciallized hardware amplifier, only these headphones and an Apple laptop. I personally experienced about 115dB SPL (both calculated and measured), which caused my hearing loss, but these headphones can go up to 136 dB SPL (caclualted). Normally the headphones will have a maximum dB SPL (calculated) close to around 120 dB SPL (macbook pro for example), and this is generally considered loud, but not permenantly damaging. The fact I have had this serious damage done at only 115 dB SPL is an indication that not all ears are made the same, and as such, users should be warned of the possibilities. In a recent interview with Jeffery Holt, an associate professor of otology at Harvard University, he is quoted saying, “The more we learn about it, the more we realize that the safe levels are actually lower than we thought previously”. Personally, I believe it's time to incorperate a standard by which both amplifier and receiver will communicate to help better regulate the damge that can be done. Such a technology would ensure the saftey of the users and eliminate accidents such as these while remaining relatively simple. Such devices exist for specialized hardware, but there is the intrinsic difficulty in matching the impedences of the receiver and the amplifier. A small RFID chip in the headphone cable could easily relay this information to the amplifier, which would then adjust the power output to ensure hearing loss does not occur. Although such a technology would be wonderful, it is likely not very profitable, as most consumers don't really care to think about their hearing and may even prefer to keep the volume at unsafe levels. So, I am currently only hoping to speak with someone at Sony about these issues, specifically about the possibility of having this warning added to the packaging of the headphones. Thank You

Hi veita, thank you for bringing your concern to Sony's attention. We apologize for the inconvenience this may have caused you. Kindly PM me your day time phone number and your most convenient time for a call back. Thanks. - Charlie

Can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

can i connect my ipad 2 (ios 6.1) with headphones sony mdr-1rbt bluetooth?

According to the Sony Web page for those particular eaphones, no. They aren't compatible with iOS 6. Only iOS 5 and below.
http://esupport.sony.com/US/p/model-home.pl?mdl=MDR1RBT&template_id=1&region_id= 1&tab=howto#/howtoTab
Sony wrote:
Are the headphones compatible with the Apple® iOS®6 operating system?
Solution
The headphones are compatible with Apple iOS5 and lower. They are not compatible with the Apple iOS6.
Region
Canada
United States
Products
MDR1RBT
Last Modified Date:12-05-2012ID:C1032819
You can still try though, but there's no guarantee.

Headphones comparison : Sony MDR-EX71SL vs MDR-EX5

Hi folks,
Can somebody explain me the diff between the 2 mentioned headphones : Sony MDR-EX7SL vs MDR-EX5LP.
I've noticed many people on this forum promoting the EX7, and then SSR is often mentioning them side by side EX5/7 when making recommendation.
I can't seem to understand what the difference is between the 2. They seem to have the same tech specs. Is it in the wiring or the supplied case?
Background : I would be interested to get some headphones to augment my Zen Micro experience (mostly used on walk / train to work).
thanks for helping.
- Fred.
ps : this is not intended as a Sony commercial ;-)

So, anyone else has personal experience choosing between the 5 or 7? Here in Belgium, they don't seem to come cheap. I can find the 5 in a rather expensi've store for 45 EUR, and I found the 7 in a cheap store for 55 EUR. (multiply by .3 to get $ amounts).
and yes, I would guess you can easily find an extension cord for this type of cable, especially as there's (to my knowledge) no special feature to that supplied extension cord you lost (like e.g. there's no volume controller or so on it).
Message Edited by fred_be9300 on 0-7-2005 08:50 AM

How could i pair iphone 5s with Sony MDR-1RBT MDR-1R Wireless NFC Bluetooth Headphones

Hi
I like to have some informations about Sony MDR-1RBT MDR-1R Wireless NFC Bluetooth Headphones
Anyone please help me how to pair Sony MDR-1RBT MDR-1R Wireless NFC Bluetooth Headphones with my iphone 5s
Thanks in advance for your help!!

thank you !!
But do you know does it works with iphone 5s . As it is a nice headphones and i would like to buy one . But i dont lnow whether it will work or not !!
Thanks in advance for your answer

Sony MDR-EX81LP He

i have a question about these earphones cord quality i heard that the white cord is made out of a fabric kind of materaial that really isn't that durable and rips quickly or so called "dissolves" i was wondering is this true and if the black version is made out of the same material? Because i use my mp3 player alot and i want good quality sound and i finally decided to get these headphone. Please help me i need a timely answer because i am about to buy them along with another zen touch thanx for all your help.

Cause i had the sony mdr-j20 white versions and they cord quality on that was horribile it rip in just two weeks and i use my player just for commuting and while doing school work at home. and i heard it was the same type of cord on all sony white earphones and i really dont want to loose my money again in earphones. Thats why i was wondering that probably the black was better quality than the white version but i thank you for your help , i still don't know what to choose but i hope i make the right decision , by the way do you know of any retail stores that sell these headphones because i checked all the big names like compusa, bestbuy, staples and no of them carry it and info would help so that i can actually see the earphone before i buy them.

Where can I find replacement pads for Sony MDR If240r

Need replacement pads for Sony MDR If240r. What pads will work.
Solved!
Go to Solution.

Hello,
Welcome to the Sony Community.
The part number for the ear pad is 324636701. Please use the following link to order replacement ear pad for the Sony MDR-IF240R headphones for delivery within the US.
https://servicesales.sel.sony.com/ecom/accessories/web/shoppingCart.do?operation=addToCart&itemId=13...
Thank you for your post.

Anyone use the Sony MDRV-700 DJ headphones with nano?

Anyone use these with the nano? Did they work well?
http://www.warhogsaudioshop.com/ProductImages/Product%20Pictures/Sony%20Pro-Audi o/MDRV700DJ.jpg
I like big headphones, and want to hear from folks that have used them with their nano.
Thanks for your contributions in advance,
-D.R.

I use Sony MDR-V6 headphones with the nano, and they sound great. These are the same as Sony Pro MDR-7506 (although often the MDR-V6 can be found for less money). These are actually great headphones for sound from nearly any gear (especially at the price), and they provide good isolation.
I don't know how the V-700 headphones work, but I'd stay away from them under the fear that they would be similar to the V-600s which are awful.
You will look ridiculous walking around in MDR-V6 cans unless you are in a recording studio. I hide in my office or at home with them and walk around with either buds (which unfortunately don't work with my ear shape very well - no bass) or Koss Sporta Pro (muddy and too much bass, but somehow musical and adequate for the task if exercising or walking about with ambient noise, plus you can set them around your neck when you aren't using them so they don't take pocket/bag space.)

Sony mdr v700dj

Does anyone know where I can get a replacment screw jack adapter for my Sony mdr v700dj headphones?

You appear to be located in United Kingdom. Please post your inquiry on Sony UK Community here for further assistance. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

Sony MDR V-6 Headphones

Similar Messages

Maybe you are looking for