Sony mw600 dont display music id and caller name

I am usinh sony mw600 with my phone (huawei mate android 4.2.1) and the headphone dony show the track id ornthe caller name, please help

Some Android phones does unfortunately not support sending this information to a bluetooth headset and in this case you can usually only see the number when someone calls you.
I recommend that you contact Huawei to see if they are aware of this.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

How can I display the first and last name using a paramater as employee ID?

Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
Z

Hi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay

Fbl1n and fbl5n line item wise display the cutomer and vendor name

Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PM

Hi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba

Transaction SMOEAC does not display Object type and Object Name options.

Dear all,
When I go to transaction SMOEAC system does not display fields Object type and Object Name option instead displays an empty frame allowing only to create new objects.
System does not allow and display existing objects to edit.
Most imp with the same ID, I am able to see the existing objects and two fields "Object type" and "Object Name" on different machine. So there is no authorization issue.
My SAP GUI version where these fields are not visible is 640 Final Release with 6405.5.18.1016 version and Patch level 18.
My SAP GUI version here these fields are visible is 640 Final Release with 6404.4.14.1012 version and Patch Level 14.
Any idea what could be the reason?
Regards,
Sandeep Parab

With installation of latest version of SAP GUI 710 final Release resolved my problem.
Regards,
Sandeep

Problem with iPhone displaying contacts sms and calls

my iphone suddenly stopped displaying callers names and just displays incoming numbers. same thing happens for sms. any solutionnS

A number of Verizon users have issues with numbers not being formatted correctly, resulting in the problems you are seeing. This has resolved it for many:
Dial *228 on your iPhone. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press the red minus sign to stop them.
Wait a 3-5 minutes.
Open the Message App to verify the fix.

Issue with recieving long SMS and Caller Name display

Hi,
Im new to the blackberry and have looked around other forums & technical centre and havn't found any way to solve my issues although i did find something about caller id problems.
1) When people send me long SMS i.e over 160 characters long i keep recieving them in separate SMS and it becomes very confusing... i have owned over 7 different phones in the past and this has never been a problem. Is there any way to solve this?
2) Quite often when someone calls me, i only seem to be able to see the callers number and not the Name, this is frustating as i have no idea who is ringing.
Hope you can assist me.
Thanks.

It helps to give ALL the details of yoru device, such as your OS release on the device and your carrier as well.
1. Verizon blocks combined SMS over 160 characters on their BlackBerrys. You should fuss at them. Other carriers don't do this. An alternative for you is the application called "Beyond160", find it in AppWorld.
2. There could be any one of three solutions... Try these:
a. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
b. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
c. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why cant apple track my stolen iphone if it connects to the internet after reset. the IMEI number stays the same so i dont understand why they just dont shut it off and call me and the police to inform me about the whereabouts of the phone

Hi, my iphone was stolen around a month ago. After the phone popped up on find my iphone in central london the police decided to be really helpful and instead going to get it they closed my case. Since then it has been offline because the "lovely" individual who stole it obviously reset it. I was just wondering why doesnt apple track phones through the IMEI number. The number stays the same, so if the phone connects to the network they should be able to know that its my stolen iphone. I just dont understand why they dont do that. They have a huge ecosystem, and if someone signs in to my iphone with their itunes account (which they pretty much have to in order to use most of the phones features) the IMEI number gets associated with that perticular account. Would it not be possible for them to realize that its my stolen phone?
Thanks to anyone that answers.

Your carrier can lock the IMEI number, try contacting them. At least you'll have the satifsaction of knowing the theif can't use it anymore. My guess is Apple doesn't block IMEI numbers because they don't want someone selling a phone without record, and then reporting it stolen and causing problems that way. But that's just a guess, I feel for ya. Good luck either way, if it's a locked phone you should be able to call the carrier it's locked to and have the IMEI blocked.

Screen displays music notes and a usb plug seperated by an arrow.......and the phone doesn`t work. How do I fix this????????

help

That icon means you must connect the phone to your computer so iTunes can restore it. The phone's software is corrupted.

FI Report to display Profit center and Vendor name

Hi,
We are using 6.0 version.
Can you please suggest a Standard report which can give me the Actual line items with GL line item detail with Vendor name & Profit center.
FAGLL03, is not giving me Vendor name.
Please advise.
Thanks,
Pavan.

Hi,
This FAGLL03 for GL account line item display.
Here you can see all the GL account for example if you are looking Salary accout how you will expect th vendor name over there.
Vendor display is different area right
FBL1N
If you want add vendor in the FAGLL03, the go to SHD0 added vendor name there and complete the steps
Warm
Shiv

About blob handling - how to display document type and document name?

Hi,
I am developing an APEX application, and I need a report region with a blob column(document) in it, and I want it to display like this :
with an image on the left side(different images for different type of docs such as word, pdf, txt) ,
and the file name on the right, with a download link on the file name, and also get the file name included into the download link address,
also have the file size displayed in the report.
I failed on getting this done with the help of any document, any help will be very much appreciated.
Thanks.

OK this link is very useful: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31blob.htm#o
plus the doclib application example.
It's too late here and I won't write down the detail now. The above two give the answers anyway.

How can I configure MA to display "speaking" OpCode and Task names

If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
Regards,
Alexander
Kind regards, Alexander

Hi Paul,
please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
part of the manifest is here:
<tasks>
<task name="ReadingFromGdb" value="1"/>
<task name="LogReadPreInvoke" value="65532"/>
</tasks>
<opcodes>
</opcodes>
<keywords>
<keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
<keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
</keywords>
<events>
<event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
</events>
<templates>
<template tid="LogGdbReadPreInvokeArgs">
<data name="fullName" inType="win:UnicodeString"/>
<data name="methodName" inType="win:UnicodeString"/>
</template>
I hope, it helps you to understand details of my questions.
Regards,
Alexander
Kind regards, Alexander

Display Service Pack and OS Name/Version in Flex Label

Hi,
I want to show my current system Operating system name (XP Pro, Vista, Linux..etc) along with the Service Pack level of my system on which my application is running.
I am able to show uo OS name "Windows XP" using "Capabalities.os" in Flex4.0. but not "Professional" or "Pro" exactly. But I could not find an API for showing up the service pack level.
I have to display the content in a label. I tried with Capabilities.cpuArchitecture and System.vmversion, but it shows up some other system data.
I want to show up Service pack version.
It will be good if I do not have to use any external API for that, if flex itself can provide any such API for that.
Please help.!!
Thanks,
Nitika

Hello,
The "SAP NetWeaver Application Server, Java (TM) EE 5 Edition" is a preview version of the next major release of SAP NetWeaver. Being so, it is neither a major version release, nor a service pack of a product.
Information about the upcoming Java EE 5 product, supported for production use, can be found <a href="http://www.sap.com/company/press/press.epx?pressid=6705">here</a>.
Regards,
Svetoslav

Displaying image and node name while dragging ...like Windows Explorer.

hi group,
i want to display the image and node name of the node while dragging in my tree.like windows Explorer.
Any body can help me regarding this.?pls
thank u...
Shalinipriya.

hi group,
Anybody knows regarding this "dragging nodename and image"?
pls let me know
thank u...
Shalinipriya.

When will Smartview support display both aliases and members?

In the Essbase classic add-in, users had the ability to display both aliases and member names. When using Smartview with Essbase, this isn't supported. Are there plans to add this back? Thanks.

I heard this is the most requested parity feature of the addin, that Oracle may be doing this sometime in 2010 since it is a complicated fix.

User and group names truncated with ls

Hello,
When using the 'ls -l' command the resulting list truncates user and group names that are longer than 8 characters.
Is this a know issue?
I'm running Mac OS 10.4.10.
Thanks,
Anthony

Jun T. wrote:
If a program like "ls" wants to know the username corresponding to the uid, it must call a library function of the operating system. But there are two library functions, one gives the correct username and the other truncates the username.
The basic library function is getpwuid(3) which returns the correct username.
Hello Jun,
I ran a search using Xfind (Rixstep) on /bin for 'userfromuid' and /bin/ls was listed as I might of expected.
Also, /bin/ls was also listed when 'getpwuid' was used as a search Key.
Peeking further into /bin/ls further with Xstrings (which is Rickstep's "adaptation" of the "strings' tool" ) reveals the string '_ getpwuid'.
Does this mean that at some point the 'ls' command can call the getpwuid() directly under some circumstances rather than going through userfromuid() which relies on the cache you mentioned?
The problem is the size of the table; userfromuid() allocates only 8
characters for each username (the number 8 comes from UT_NAMESIZE in /
usr/include/utmp.h), and truncates the username if it is longer. This
may be "fixed" in a future version; or it may not be "fixed" to keep
backward compatibility. I'm not sure.
I've heard that utmpx.h has 'UTXUSERSIZE' which is defined as 32. Does not that allow for user and group names larger than 8 characters?
By the way, I can't find the directory usr/include/utmp.h on my drive.
Is there a way to reset or redefine this 'UT_NAMESIZE' field to more than 8 characters wherever the userfromuid() function stores it?
The commands "users", "who", and "w" read the file /var/run/utmp, in
which truncatd usernames of the currently logged-in users are saved.
Does some command initially call the function as 'ls', userfromuid(), to result in truncated names being saved in file /var/run/utmp as well?
I think there are many programs which depend on this fixed-width utmp
file, so it may not be "fixed" in a future version. "
I believe there are third party tools which rely on the userfromuid() call which require this bug to be fixed in order to display accurate user and group name data.
Thanks for your informative reply,
Anthony

Sony mw600 dont display music id and caller name

Similar Messages

Maybe you are looking for