Sony NEX 7 Raw files using PSE 10

Hello
I am new using PSE 10... why my raw files from the Sony NEX7 couldn´t be opened ? What I doing wrong or what plug in I need to install ?
Please help me

I had a similar issue with a Sony RX100. It was not supported by ACR (Adobe Camera Raw) until version 7.2. Version 7.2 includes the NEX 7 too. It may have been included in earlier versions, but I'm not sure.
ACR is the free Adobe plug in that has all the camera and lens correstions and adjustments. The camera makers create there RAW formats and Adobe then, one at a time, turns that into conversion data in ACR. At least I think that's how it works!
PSE 10 will only go to ACR 6.7. It won't upgrade ACR past 6.7. You have to buy PSE 11 to get functionality with ACR 7.2
The way it works it that you have PSE search for updates under the Help menu. When PSE 10 was new, it allowed me to update the ACR to 6.7. In fact it insisted I do it. The same was true with PSE 11. It alerted me that an upgrade was available.
A similar situation exists with Lightroom. My Sony camera would not work with LR 4. It had to upgrade itself to 4.2
If you don't want to deal with the Adobe details, Sony provides "Image Data Converter" that can make files from the Sony RAW images that PSE10 can work with.
Good luck!
Bill

Similar Messages

How can I process a Sony A7 RAW file into Photoshop CS5.

How can I process a Sony A7 RAW file into Photoshop CS5. I tried the file DNG converter 8.3, but it did not work. I was able to download it, but upon reading the memory chip from Photoshop CS5, it reads the jpg files fine, but not the RAW files. I thought the DNG converter 8.3 was the right file, but apparently it is not. Perhaps I need to do something in Photoshop CS5 to initiate it, or place it in a particular directory.. Please help.

First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version. Always use the very latest version. 8.3 was simply the first ACR version to support your camera model, that's all.
Note that the DNG Converter works only on folders, not on individual raw files. Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
You also need to make sure that CS5 is fully updated. You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Can I open raw files using photoshop elements

Can I open raw files using photoshop elements

Yes, depending on the Camera Model and version of PSE.
All camera makers like to make slight changes to the RAW format for their new models. Adobe then take a few months to produce a camera RAW plug-in to process the new format.
Give you PSE version and camera model and we could be more help.
Brian

Help opening raw files in PSE 13

Hello,
I upgraded PSE 13 from PSE 9. I was using PSE 9 with my Nikon 600 (because I couldn't open the 600 raw files in PSE 9) by using the Adobe DNG converter. This was working fine. Since upgrading I can't open any Nikon 600 raw files in PSE 13 nor can I open the converted DNG files. It only recognizes jpeg files. The "Open in Camera Raw" option in the File drop down menu is also grayed out and can't be selected. I've tried the "updates" option from the Help menu and ran the updates, shut down PSE13 and also shut down computer and it still isn't working. Wondering if I need to download a new ACR but can't find any that support the Nikon 600. Any help would be appreciated!

Thank you for your help.
When I do the "Help" drop down menu there isn't an option for "adobe plug-in" just "about plug-in" which doesn't list any options that seem to help when clicking on and none that say Camera raw.
I read the manual instructions for downloading and am currently downloading the zip file; it is about 70% done. Will this help?
This is what I'm referencing:
These instructions were originally written to install ACR 8.2 for PSE11, but have been updated to install ACR 8.3 with PSE12. While ACR 8.3 RC would work with PSE11, ACR 8.3 final will not. Only PSE12 will host ACR 8.3.
ACR 8.3 will work with PSE12 to open 70D files, but on an older Windows OS like Vista or XP there is no compatible installer, so a manual install is the only option. I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
I was able to get 70D files to open in ACR 8.3 on PSE12 by doing the following:
Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog - in the future this link will likely contain links to only newer versions of ACR but the process would be similar:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
Unzip this downloaded setup.zip to a folder somewhere.
Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928.
(Note that for future versions of PS and ACR the folder name will be different at the end, but the general format shold be similiar, and the important thing is that this is the folder without x64 in the path, because at this point PSE is a 32-bit program so we need the 32-bit version of the plug-in. At some point in the future, PSExx may be 64-bit and the approporiate file or files could be the 64-bit version for the 64-bit version of PSE. This zip file is for Photoshop which has both 32-bit and 64-bit versions so there are both versions of the plug-in as well.)
Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
Inside Assets1_1.zip there is a file called 1003. This is the largest or perhaps only file in that zip and is the plug-in you need.
Copy this 1003 file into the existing PSE12 camera raw plug-in folder:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats or for a 32-bit Windows OS, into: C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
Rename the existing Camera Raw.8bi to Camera Raw_8bi_80 (in case something doesn't work and you need to rename it back, later).
Rename 1003 to Camera Raw.8bi
After these steps you have the ACR 8.3 plug-in installed in PSE12 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

Why can't I download Canon S100 CR2 RAW files into PSE 10?

I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages: Nothing imported...files are not supported file types or alread in catalog. File damaged or in a format that cannot be included in the Elements Organizer.
These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

Thank you for the info. It worked great, once I was
able to get around a second problem that prevented updating
from within the PSE 10 application (error U41M1C212). That
problem was solved by disabling the MS Virtual WiFi Miniport
Adapter (located in the Network and Sharing Center control
panel). It just goes to show me once again, how complex
computer apps are and how much we all have to rely on each
other to get anything to work properly (frustratingly
enough, since the companies we paid good money to for
their problematic software are not very helpful). Thanks
again.
            Re: Why can't I download Canon S100 CR2 RAW files into
PSE 10?
            created by 99jon in Photoshop Elements - View the full discussion
Try opening a CR2 directly from a folder by right-clicking
and choosing open with Photoshop Elements editor, if that
dosent work, update the appliactaion (required for the
S100V)
In the Editor menu click Help >> Updates
Then install amera raw 6.7
            Replies to this
message go to everyone subscribed to this thread, not directly
to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4602882#4602882
            To unsubscribe from
this thread, please visit the message page at
http://forums.adobe.com/message/4602882#4602882. In the
Actions box on the right, click the Stop Email
Notifications link.
            Start a new discussion
in Photoshop Elements by email or at Adobe Forums
            For more information
about maintaining your forum email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Sony RX100 raw files converted with DNG converter not recognizable

Since installing Maverick 10.9.4 on the Mac, Sony RX100 raw files converted with DNG converter are no more recognizable.
Somebody else the same problem?

I know my DNG files themselves and the info they contain are fine. But they're not properly supported in Mavericks 10.9.4 and I don't plan on switching to Windows. A file that I converted to a DNG using Adobe software is now listed as an unrecognized file in OSX. No thumbnails, no iPhoto, no Aperture. Essentially, no support. And this is a problem. A quick search will show you people with various Sony cameras (A7, RX100 mkI and mkIII, at least) having the same problem.
No matter where the blame falls, the simple fact is that if you shoot with various Sony cameras, use Adobe software to convert the file to DNG and happen to be an OSX user, you're files are no longer compatible with OSX or Apple's photo software. They will only open in Adobe software. You literally get a warning message from OSX saying, this is an unsupported file type when you try and open it.
Like I said previously, I've had a managed iPhoto library for about 5 years now, numerous hours of tagging and organzing, and every DNG file converted from a Sony ARW RAW is currently unsupported. Original ARW files work just fine. It's nuts. Maybe it's Adobe's fault. Maybe it's Apple's fault. It really doesn't matter. If DNG is not a reliable standard format under certain edge cases (Sony ARW, DNG converter, OSX Mavericks), it's not a reliable standard format at all. I just hope that Apple or Adobe figures this out, so that I can get those photos back.
In the mean time, certain users such as myself just can't rely on DNG. End of story.

Satellite L850 cannot open ARW RAW files using WMP 12

Howdy all,
I have an Satellite L850 ivybridge with windows 7 proffessional 64 bit. I am having trouble opening Sony ARW raw files in Windows media player.
I have installed the Windows codec, which it says supports the Sony A55. I have the a65 which replaced the a55.
On my old other laptop the same Windows 7 proffesional software, media play open the raw files for viewings.
Any help welcome.

Hi Bob
Please dont understand me wrong but described issue has nothing to do with Toshiba directly. I hope someone here will be able to help but I think you should contact either Microsoft support or Sony to check what they will say about that.
I dont know which external devise from Sony do you use but usually Sony offers some additional software for own products.
Very interesting article about Sony ARW files you can find HERE

Can't Open NEF RAW files in PSE 6

I cannot open NEF RAW files in PSE 6. I downloaded the plugin but that didn't fix it. Any suggestions?

There is another choice.
You can download the free Adobe DNG Converter, then convert your RAWs to DNG, and then open them in the PSE6 Adobe Camera Raw editor. This doesn't require you updating your software to PSE9, or purchasing anything.

The type of Raw File used in my Canon 7D MKll is not supported in Bridge, Camera Raw or Photoshop 5S. How can I fix this?

The type of Raw File used in my Canon 7D MKll is not supported in Camera Raw, Adobe Bridge or Photoshop 5S. How do I fix this?

I gather you are using Photoshop CS5? The most recent Camera Raw version that CS5 will accept is ACR 6.7. Support for the Canon 7D Mark II was added in ACR 8.7.1. You will have to use the DNG converter to covert your CR2 files to the universal DNG raw format. Here are the links for the DNG converter:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
Benjamin

How to open RAW files using elements 10 with a pc using windows xp and nikon D3300

i have an old pc running on windows xp to which i downloaded elements 10. i recently bought a nikon d3300 and am shooting RAW. is there a way to open the RAW files using elements 10?

The 8.4 dng converter won't work on windows xp, but will on windows 7.
The newest version of the dng converter that works on windows xp is 8.3
http://blogs.adobe.com/lightroomjournal/2013/12/camera-raw-8-support-on-windows-xp-windows -vista-and-mac-osx-10-6.html
Since you have windows 7 you might as well use the newest version of the dng converter 8.7.1
(covers the same cameras as 8.3, with some added and bug fixes)
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1

.NEF RAW file in PSE 11 will directly open in the edit modus

When I open a .NEF RAW file in PSE 11 it will directly open in the edit modus and skip the RAW editing window what is what I do not want. How to affoid this?

Are you on a computer that has a very small screen size?
What is the resolution of your computer screen, in pixels, width and height?

Importing and editing raw files using a Canon 70D

I have a new Canon 70D. If I upgrade to photoshop elements 12 will I be able to import raw files using this camera without using plug ins. It would not import raw files off a 70D in elements 11 but would for my older ?Canon 60D. Has this been corrected??

Well if you are still seeking the link, here is it:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5646
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5645
You can convert a whole folder of raw images in one click. See this quick video tutorial:
http://www.youtube.com/watch?v=0bqGovpuihw
And yes, you will be able to work upon these images in PSE12 using ACR 8.2

Cannot import sony arw raw files into lightroom 5

How can I import sony arw raw files to lightroom 5. On Import I cannot convert them to dng.

What camera?
What version of Lightroom?
What is the exact complete word-for-word verbatim error message?
What exactly do you see on your screen anyway when this is happening? Describe in detail.

Sony A77 raw file support

I looked up here http://www.apple.com/aperture/specs/raw.html and saw that the support of Sony A77 raw file is there. However, after I bought and installed the aperture, it does not support the raw file.... iMac OSX 10.7.2 and the aperture is the latest one.

I actually did the camera raw support 3.9 update but I still can not open my a77 raw files.
I find out that the problem is, all the raw files I imported into Aperture before I did the 3.9 update
are still not supported. All raw files imporrted after the 3.9 update installed can now be viewed and edited.
Thank you for the answer

HT3825 i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

i cant import my 5d 3 raw file using iphoto. how i can solve my problem? i already download the last version of adobe raw ubdat

A Good samaritan answered this for me on another forum
How to update Camera Raw

Sony NEX 7 Raw files using PSE 10

Similar Messages

Maybe you are looking for