Sony pj650 says accessories not supported when trying to use Sony ecm-gz1m gun/zoom microphone.
The sony ecm-gz1m says it is compatible with cameras that have the multi interface shoe but when I plug it in it says accessories not supported.
Hi duszac,
Welcome to the Sony Community!
The ECM-GZ1M microphone is indeed compatible with the HDRPJ650V camera. But the Zoom mode is not going to work. Please detach the microphone from the camera, check the setting of your mic, and change it Gun mode before reattaching it again. We recommend attaching the accessories while the camera is turned off.
If my post answers your question,,please mark it as "Accept as Solution". Thanks_Mitch
Similar Messages
-
Time Machine Restore and now says Scanner not found - when trying to use
the printers.
Had a faulty harddrive -(per the apple store - this after replacing the screen and logic board...) - so they installed a new one - I restored from my time machine backup - and then went to use my HP 1315 Scanner. Didn't work - get error - scanner not found - even though I can print to the device.
So - I uninstalled and reinstalled the printer in the system preferences - but get same error - so instead I uninstalled all the HP apps and reinstalled them (a pain because HP doesn't make 10.5 software yet).
Still same issue - Scanner not found.
I was using this same scanner prior to the hard drive freeze. HP posts a notice that if you really want the hp software to work you should downgrade to Tiger, install, then reupgrade - but that seems like a lot of hassle to get a scanner to work.
Does anyone have another suggestion?Thanks Barry -
I wish Profile allowed to list all of my computers and all of My OS systems - but it doesn't - so I'm forced to post each and every time whatever OS is causing whatever issue I'm having.
I have deleted and reinstalled several times to no avail. I do get an error on install that the HPIOX cannot launch...
I am a bit frustrated - this is the 5'th device an Apple upgrade has cost me...
All my belkin devices for my iphone don't work with the new iphone (they altered a pin configuration for the power)
The 1,000 upgraded car kit for Mercedes that I bought just a month ago -- worked great with Iphone 2g - doesn't charge the 3g
Leopard has killed my scanning capabilities...
It wouldn't be such a hard pill to swallow except I keep seeing that ad where the japanese girl comes by and the Mac guy starts talking japanese and the tag line "it just works" -
No - in fact - it doesn't.
My camera only shares pictures with the mac - movies require a 3 way translation
My printer will print - but not scan
My Mercedes car kit will play music - but not charge
All of these things worked with Tiger and Iphone 2g - seems to me like either Apple is trying to force profitability of its partners by forcing consumers to constantly upgrade to new equipment - or - they just don't give a s_t ---- -
iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. -
Are .mp4 files not supported when trying to merge 2 videos into 1 video?
Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.
There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue. -
why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
It couldn't be much easier than that as you don't actually have to do anything more than normal.
This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
USB syncing is far faster than Bluetooth. -
My Ipod says version not supported when attaching to my Honda
I just purchased a Honda Insight and hooked my iPod up to the USB port and it was working fine. I brought my ipod inside and hooked it up to my macbook added several songs and may have upgraded the software. Now when I hook it up to the USB in the Honda it says version not supported. Is this an iPod issue or is this something that I need to address with Honda.
Thanks,
SASGeek
Falmouth MaineWhat iPod firmware version does the Honda say it will support on the iPod?
-
My Nokia X6 says - "accessory not supported" whene...
My Nokia X6 says - "accessory not supported" whenever i insert my earphones (Came with its box!)
They used to work fine before! I just listened to some songs an hour ago!
One more change is that there was an icon by the side of battery indicator (looked like an arrow coming out of a box from above) which is not there anymore!
Any help? I tried restoring default setting but got nothing.
Nokia x6there is no virus try hard reset back up your data
Switch-off the phone (Remove the battery and re-insert it, if necessary). Now Press and HOLD the GREEN (Call) key, RED (Call end) key and the Camera-capture key SIMULTANEOUSLY. While still pressing the above three keys press the power On/Off key, hold them until phone boots up.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
IPod says "FireWire not supported" when connecting with a USB cable
Hello all. First post ever. I am trying to connect my Nano (1 gig) to my Windows Vista. (This use to work flawlessly) Whenever I try to connect my iPod to my computer via a USB cable, it says "FireWire connections are not supported please use USB cable provided blah blah..." It is strange because I have never used anything but a USB cable with my iPod. I've tried everything, resetting via Menu + select, putting it in Disk mode. Seperate PC's including an XP PC. Anyone ever had this happen to them? Please help!!
Thank you,
Ben RoughanThis message appears to be a hardware issue, and cannot be fixed; the iPod likely needs to be replaced.
(19692) -
Mode not supported when trying to connect mac to tv
I'm trying to connect my Mac to the TV as I do nearly every day using my HDMI cable via the apple HDMI adaptor (don't know exactly what that cable is called). But when I try it cuts in and out in fuzziness for a bit then eventually comes up with the error message on my tv "mode not supported". I can't see any visible faults in the cables at all. Do I need to replace one or both of the cables? Or is there something else wrong? If it's the cables, how do I figure which needs replacing without having to buy both if it's only one of them? Help!
Hi Sneuby,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue on connecting to your Television from ThinkPad T440s.
Recently have you updated the system with any of the application or with drivers from Windows update?
Check uninstalling the Graphic driver from the system.
Please let us know the findings once you have performed the above steps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card
-
"Calendar: Feature not supported" When trying to a...
I have Nokia e52
SW: 022.009
and maps ver: 3.03
When I create a note in calendar and add location > Assign from Maps, I get error message: Calendar: Feature not supported
Is there way to fix it somehow?
Will SW update help?Hi Zwitster,
Please try this code below, it works fine in my environment:
// replace your site URL
using (SPSite site = new SPSite("http://sp/sites/sharepoint2013"))
using (SPWeb web = site.OpenWeb())
// replace the source document URL with your URL
if (web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom").Exists)
SPFolder folder = web.GetFolder("http://sp/sites/sharepoint2013/customDoc03/custom");
// replace the destination URL with your URL
folder.MoveTo("http://sp/sites/sharepoint2013/customDoc04/custom");
Please have a look at this article:
http://sharepoint.stackexchange.com/questions/115876/moving-document-set-from-a-documet-library-to-another-with-document-id
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
TS1363 Mac says "Accessory Not Supported " when I plug in my New Nano?
I get the above Message when I pluf in my Nana. And Ideas for Resolution?
Have you tried another USB port or USB cable to see if that makes any difference? Is the iPod's dock connector port clean and clear or any debris or damage that could be preventing a full and proper connection?
B-rock -
Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word
Hi
I am having problems when I try to run an executable on a PC. My Development PC that has Labview 8.2 and Microsoft Word 2000. I am able to run my vi (see pic attachement) without any problems. I compile it as an executable and run it on my Development PC and everything still works ok. I deployed it on another machine with Labview Run-Time Engine Version 8.2 and it works ok. I tried it again on a third PC and get the following error
Error -2147319779 Library not registered
All PC's are running windows XP and all have microsoft word 2000 installed.
I have tried uninstalling National instruments software (Run-time Engine) as well as Microsoft Word on the failing PC, but still no luck.
Does anyone have any suggestions.
Thanks
Steve
Attachments:
open word and save changes.jpg 59 KBHey Steve,
I hate to throw links at you, but it appears this problem has occurred with developers before.
Easy text Report.VI...not so easy (You have to love a title like that)
Problem with LabVIEW Run Time communicating with Access Database
These links may not seem relevant to your issue, but at its base the Report Generation and Database Connectivity toolsets are simply ActiveX/.NET calls into Microsoft products (or ODBC, etc.). This is similar to what you're doing.
Also, I would try reinstalling MS Office. This has been known to solve the problem.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments | -
also will not load automatically anymore since lost power few days ago.
Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
J2SE Enviornment 5.0 Update 15
Java 6 Update 17 -
My macbook pro keeps saying its not supported when i try to transfer images and stuff from my macbook pro to my iphone 4. What do I do?
First, put your images into iPhoto or into a separate folder. Open iTunes and connect your phone. Select the iPhone under the Devices section of iTunes' sidebar. Click on the Photos tab in iTunes' main window. From the dropdown menu you can select iPhoto or some other folder from which to sync the photos to your phone.
Maybe you are looking for
-
I am getting the following error while importing a DMP file exported using 9.02 to 9.0.1.1.1 and the import fails. import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set export client uses EE8MSWIN1250 character set (possible cha
-
How can i change or add new default optiom in su01 tab
Dear Experts , here oe End user Required some Requirments in SU01 -> Default tab su01 --> Default tab -->Decimal Notation having different styles (1,234,567,89) but my END user wants like 12,34,56,789 this format how can we get this type ...is it pos
-
Error message with Adobe Reader
I get an error message saying that the application is trying to shut down in an unusal manner when I try to open a file with Adobe Reader.
-
Control File Missing Temp file
Dear All, I have a problem with my database and receiving errors related to Temp file. I run the following command and got output as: *select status,name from v$tempfile;* *Output:* STATUS NAME ONLINE 'X:\ORACLE\ORADATA\PROD\TMPPROD02.DBF' ONLINE 'X:
-
My iPhone 4s was stolen almost a week ago now. If I can still see the phone listed in Find My iPhone but appears to be turned off does this mean the theif has not restored it to factory settings???