Sony PVM 2541 and Premiere CC

Hello,
Im having a problem with Premiere CC. Since the CC version I am no longer able to preview videos on my Sony video screen (its connected via Decklink SDI). I cant find a way in the preferences to switch screen for preview.
It was working fine in Premiere CS 6. Can anyone please help me out?
Best regards
Gregor

What resolution and frame rate is your sequence? And confirm CS6 outputs to your monitor with the latest driver?
Peter Garaway
Adobe
Premiere Pro

Similar Messages

Sony PVM 20N5U=Broadcast Color Correction Monitor?

Hello, folks. Posted this on the "Getting started with video production on a Mac" forum, but no responses . . . so I'm trying here.
I have a Sony 14M2U that IS indeed a professional grade broadcast monitor that can be used for color correction. However, I was recently given a Sony PVM 20N5U and I'm wondering if this one can also be used for broadcast standard/professional color correction. I looked online, but couldn't find any specific information on whether it was or not.
Any help resolving this would be greatly appreciated.
Thanks much in advance,
Javier

the n5u is a very sweet monitor and quite versatile. Beats the cr*p out of most of the lcd monitors out there. These are no longer in production, so check carefully the hours on the tube and the general condition.

Sony PVM 20N5U a Color Correction Monitor?

Hello, folks. Didn't know where else to post this, so I'm trying here.
I have a Sony 14M2U that IS indeed a professional grade color correction monitor. However, I was recently given a Sony PVM 20N5U and I'm wondering if this one is a professional color correction monitor as well. I looked online, but couldn't find any specific information on whether it was or not.
Any help resolving this would be greatly appreciated.
Thanks much in advance,
Javier

The N5U series is what's called a presentation monitor for general viewing, hardly anything to be used for color accuracy. http://www.videosupport.tv/specs/Sony/Brochures/PVM20N6U.PDF
I also wouldn't call the PVM-M2U line of monitors "grade" monitors at all. While feature rich, they have P-22 phosphors and a vertical resolution of only 600 lines. The M4U line of monitors had 800 lines of vertical resolution as well as SMPTE-C phosphors in the tube.
However, your 14M2U is a heck of a lot more color accurate (if you've had it benched by a technician recently) and consistent than that 20N5U.

Sony NEX-5N AVCHD 2.0 1080p50 and Premiere Pro/After Effects CS5.5

Hi all,
I have a new Sony NEX-5N and have shot some test 1080p50 video using it.
On my quest for some new editing/production software to close the loop I have just downloaded and installed a Trial Version of CS5.5 Production Premium.
I am able to load my video files into Premiere Pro.
However, when I attempt to open the Video File in After Effects, I recieve the following Error message:
   After Effects error: '00023.MTS' cannot be imported - this '.mts' file is damaged or unsupported.
I have tried renaming the extension to .MPG, .M4V, .M2TS all with exactly the same result.
Perhaps this is a limitation of the Trial Version or perhaps a limitation of After Effects CS5.5. Is anyone able to advise?
As extra information I include below the TEXT output from MediaInfo for the file I am able to load into Premiere Pro CS5.5 but not After Effects.
Thanks.
General
ID                               : 0 (0x0)
Complete name                    : F:\AVI\Video\SourceMedia\00023.MTS
Format                           : BDAV
Format/Info                      : Blu-ray Video
File size                        : 61.8 MiB
Duration                         : 19s 616ms
Overall bit rate mode            : Variable
Overall bit rate                 : 26.4 Mbps
Maximum Overall bit rate         : 28.0 Mbps
Video
ID                               : 4113 (0x1011)
Menu ID                          : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Format settings, GOP             : M=1, N=12
Codec ID                         : 27
Duration                         : 19s 680ms
Bit rate mode                    : Variable
Bit rate                         : 25.1 Mbps
Maximum bit rate                 : 26.0 Mbps
Width                            : 1 920 pixels
Height                           : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                       : 50.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.242
Stream size                      : 58.8 MiB (95%)
Audio
ID                               : 4352 (0x1100)
Menu ID                          : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Mode extension                   : CM (complete main)
Codec ID                         : 129
Duration                         : 19s 680ms
Bit rate mode                    : Constant
Bit rate                         : 256 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Stream size                      : 615 KiB (1%)
Text
ID                               : 4608 (0x1200)
Menu ID                          : 1 (0x1)
Format                           : PGS
Codec ID                         : 144
Duration                         : 19s 135ms

Hi and thanks, this is exactly what I am looking for :-)
Tim Kurkoski wrote:
Other question: Is it just this one file that fails to import or is it all files from that camera?
All of the clips I have recorded fail to import to AE but work in PPro
Tim Kurkoski wrote:
Can you post a sample file that exhibits the problem so that I could try the clip on my machine?
I just recorded 4 seconds of a clock pendulum swinging, surprisingly the file was 20Mb!?!? Anyway, I have made the file available for download at the following location:
http://andrew.net.au/~rowan/avchd/00032.MTS
You can browse the directory at http://andrew.net.au/~rowan/avchd/ if you need to "right-click" and save as.
I am hoping it is a limitation of the trial as I have noticed a few other "gotchas" with the trial version.
Thanks for the advice about video format, I have noticed that my computer (Core 2 Duo) is very slow to process the H.264 stream, PremierePro cannot play the 30sec stream in realtime (starts to stutter around 23sec) and After Effects starts its stutter almost immediately (both just playing the stream with no effects) - that said WindowsMediaPlayer has no problem playing the same stream at full speed. I am however reluctant to do any transcoding except to a lossless format as it seems counter intuitive - but this will be the subject of another post, as I don't want to clutter this one.
Thanks again.

SONY PVM 14L4 not recognised via firewire

Hi to all,
I've rented a sony PVM 14L4 monitor for color correction that i'm trying to hook up to my dual G4 via firewire. FCP 5 doesn't seem to recognise it. I don't have the manual and am wondering if it is possible to hook it up directly through one of the computer's firewire ports...
Anyone familiar with this?
Thanks for your help...
Tee.

You can not hook up the monitor directly unless there is some sort of firewire board added in. If there is not one, you need a Digital Video/Analog converter between the computer and the monitor. This can be a DV camera, a DV VTR or a dedicated device such as the Canopus ADVC-300.
It works like this: firewire out to the DV/A converter then composite or S-VHS to the monitor. There is a section about how to do this in your manuals.
good luck.
x

Pc is installed with Photoshop elements and premiere but...

i have a sony vaio
Model:VGM-CR4354
It Is Installed with
Adobe Premiere Elements 4.0
Adobe Photoshop Elements 6.0
but Photoshop Elements Don't work
i Reinstalled it and still not working
it says
"Unable to continue because of a hardware or system error. Sorry, but this error in unrecoverable."

photoshop elements and premiere elements are two different programs (as you know). they have different serial numbers used to activate them.
if you were supposed to get both with your camera, you should have two serial numbers: Find your serial number quickly
however, is it possible you were only supposed to get a premiere elements serial number, and photoshop elements was supplied as a trial (to see if you wanted to purchase a serial number)?

Is the Sony PVM-1351Q going to work with my system?

I am looking into getting this for my boyfriend who is a video editor. I'm not sure exactly what he needs but I do know that as of now, he only has one monitor. He was telling me the other night that he needed another monitor for color correction and I found the Sony PVM-1351Q in my price range, used. At first I was just going to get him a regular high quality computer monitor but this seemed better somehow. Is this something an editor needs?
I'm also curious if this will work with his system. I'm writing from his email right now.
Any info on this would help or if you have another suggestion for what he might want, that would be great.

This is a fine monitor for what he needs to do... color correct. It is a standard definition monitor, and would work great for DV projects.
Jerry

I have iMovie 09 and have successfully used an older Sony Handycam to directly capture and record. Now I have a Sony HDR-PJ230 and it is not recognized. Do I need to upgrade to iMovie 11 or ???

Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???

Hi jcm2656,
iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
iMovie '09: Camcorder Support
http://support.apple.com/kb/HT3290#1
iMovie ’11 however, does support it. See this article -
Apple - iLife '11 Help - iMovie ’11 Supported Cameras
http://help.apple.com/imovie/cameras/en/index.html
Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
Thanks for using Apple Support Communities.
Best,
Brett L

I have just purchased photoshop elements and premiere package. I tried to download them but it tells me the serial numbers are inapplicable. I notice the platform says windows and I am using a mac book pro. It didn't give me an option when purchasing. wh

I purchased Photoshop Elements and Premiere package today. I have been trying to download them but it tells me the serial numbers are inapplicable. I am using a mac book pro and I have just noticed that the platform in my receipt says 'win" . I don't remember being given an option for mac or windows when purchasing. what can i do now?

Return, cancel, or exchange an Adobe order

What do i do with a very slow Photoshop Elements and Premiere Elements on a PC?

I seem to be getting mixed opinions as to why my Adobe software gets so slow, despite efforts to avoid that, but my computer seems to be working just fine, it is only when in Adobe that the problems arise, like freezing, taking longer and longer periods of time to open the screen to edit a photo, or to compare two photos side by side. Any process seems to take such a long time, and the freezing can last for several minutes, and then continue on. I have had a computer person come to my house and examine my computer and though his knowledge of Photoshop is limited, he feels that it is NOT the computer but something with Adobe Photoshop. I would tend to agree with him.
Several theories have been explained to me, such as Elements and Premiere Elements are a low end of the scale of Photoshop programs, so it is just not going to be able to process high definition large photos well and quickly. Stating comments like i can only use 2 GB of my memory even though i have 8 GB, so unless i can use 64 bit this is what i have to deal with, and it is just a way for Photoshop to say you need to upgrade to the fancier programs. I do not need fancier programs. I am working hard to master these, and have accomplished 4 great blu rays in high definition thanks to recommendations from the Forum here, especially Steve with the help of his books.
Others say i need a solid state hard drive to solve the problem. Others say the only way i will ever solve the problem is to switch to a MAC. Others state is a mal-ware problem, but i have never had my hard drive so clean and uncluttered. I supposedly have as good of PC as i could have as far as QUAD-core, 8GB memory, presently a 1 TB hard drive less than 1/2 full. All suggestions involve big outlays of money, with no guarantee that things will be any better. I have tried to contact different computer companies and computer 'nerds', and these are some of the suggestions, but no one really has a lot of knowledge of the Photoshop software.
I am thinking of adding an additional internal hard drive, but not sure that is going to help either. Could i put all my Photoshop of the second hard drive, and might that speed things up?
Adobe is rather worthless in trying to get help from them. I have spent hours on the phone waiting and then talking to someone who says they understand English but they do NOT understand the question i am asking, which becomes very frustrating with repeat phone calls. I gave up yesterday trying to do that challenging experience yesterday after i had spent 3 times the amount of time they said i would need to wait to get a reply, and i was at work, and my free time had come to an end. So i am hoping you guys can give me some clues of the best thing to do.
Is it true that Photoshop Elements and Premiere Elements are just such a lower end program that trying to do things in high definition, with 2000x1500 photos, making them into a blu ray disc is a major challenge with a PC? I wish i had a greater computer knowledge, but i have struggled to achieve my goal, but the speed of it all gets very frustrating, though it is possible.
Another question asked which i don't think exists, is whether there is a program that could clean up Photoshop, or are there some clues that could accomplish that and thereby speed things up.
Would appreciate any suggestions anyone has. I am in the middle of another project so now is probably not the best time to consider any major changes. But any comments would be appreciated.
Ron

Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

I bought a Sony alpha 77II and can not open RAW in adobe photoshop elements 12.

I bought a Sony alpha 77II and can not open RAW in adobe photoshop elements 12. Image data converter is not ok because of to much pre defined colour management, suggestions ?

[discussion moved to Photoshop Elements forum]

I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

I have home videos from a Sony DCR-HC20 and am trying to get them onto my IMac in itunes or imovie and I have it plugged in with a USB and don't know where it is or what to do next.

Hello, not certain, but turn the Camera onto Play if it has such a setting, does it show up in iMovie then?

How many times can I install Photoshop and Premiere Elements 13?

How many times can I install Photoshop and Premiere Elements 13?

mbuenger
Are you referring to how many times can I install, uninstall, reinstall Photoshop Elements 13 or Premiere Elements 13 on the same computer?
Or, how many of your computers can have a same purchased activated serial number at the same time for either of these products?
If the former, I know of no limit.
If the latter, the answer would be as John as mentioned.
ATR

MacBook Pro 13 inch (mid 2012) v MacBook Pro 15 inch (mid 2014) for After Effects and Premiere

Hi everyone,
I'm interested in working with After Effects CS6 and Premiere CS6 probably creating quite heavily layered files and experimenting with and combining effects. (I also work with Photoshop and Illustrator.)
My workplace allows me to use a 2.5 GHz Intel Dual Core i5 / MacBook Pro 13 inch (mid 2012, non retina) with hard disk and integrated graphics card (Intel HD Graphics 4000 512MB). I understand this Mac can be maxed out at 16GB of RAM. (Official Apple specs I realise say 8GB RAM is the max for this computer but I've looked into this thoroughly and have confirmed that 16GB is in fact possible.)
I'm considering purchasing one of the new Haswell based MacBook Pro (mid 2014) models for myself.
If I do, I'll get the retina 15 inch / Intel Quad Core i7 / 16GB RAM / Intel Iris Pro Graphics / NVIDIA GeForce GT 750M / 1TB Flash Storage.
I realise there is a big difference between these two machines in terms of their specs - the 15 inch with the dedicated GPU will be far more suited to motion graphics work than the lower spec machine with integrated graphics card.
Currently, my understanding is that After Effects CS6 and Premiere CS6 do not support the NVIDIA GeForce GT 750M but from research on the net I believe it's possible to add this video card to the list of supported cards within the respective applications, forcing them to recognise and use it.
Having read about the upcoming Broadwell chip, which I think may be capable of supporting 32GB RAM (possibly coming in Q2 2015 from the various websites I've visited) I wonder if it is worth holding off my purchase, and maxing out my older 13 inch laptop in order to run After Effects and Premiere for the time being.
If I waited for Broadwell based 15 inch MacBooks I think its likely they'll be expandable to 32GB RAM, making the computer a better long term investment.
eg if Adobe increase minimum/recommended memory requirements for their software in the next few years. While I don't know for sure this will happen, it does seem quite likely at some stage. The 2014 15 inch MacBook - while an excellent computer at the moment - could potentially be slightly limited with regard to future Adobe software releases as its max RAM is 16GB.
I realise I could potentially look at a high end iMac if memory is a concern, but I prefer the portability of a laptop so I'm restricting myself to portable options for the moment.
What I'm wondering is -
If I install the 13 inch 2.5GHz i5 laptop with 16GB RAM as is possible, how would it perform when running After Effects and Premiere? It currently has 4GB and it very quickly runs out of memory meaning playback of goes very slowly when previewing complex files in the timeline. This necessitates rendering of small test sections of the timeline to see it at the correct frame rate. Would the move from 4GB RAM to 16GB RAM give me a noticeable improvement in this regard? If so then this is tempting as I don't have to pay for it - I think my workplace will cover the cost of extra RAM. And then I can wait till next year to buy my own high end laptop.
The 15 inch 2.8GHz i7 quad processor has Iris Pro and dedicated NVIDIA GeForce GT750M with 2GB RAM. I would be paying the full cost myself.
I realise rendering would be faster with this Mac but would I see a noticeable improvement over the maxed out 13 inch laptop when previewing multi layered After Effects and Premiere compositions / sequences within the timeline? I like the idea of being able to preview footage in real time as I'm editing as it saves time and I think it makes the process easier generally.
Any thoughts welcome and thanks very much in advance for your time and advice.
Kind regards,
John

"It currently has 4GB and it very quickly runs out of memory meaning playback of goes very slowly when previewing complex files in the timeline."
"In this case yes, I can most certainly see a performance increase as your machine is still not too old and a RAM increase will help it for sure I just can't tell you by how much.
I own the same machine as yours (except for mine having 2.9ghz and i7, and 8GB of ram) so I think it's safe to say for me that the RAM increase will help you for sure."
That statement of mine answers your question you just asked

Sony PVM 2541 and Premiere CC

Similar Messages

Maybe you are looking for