Sony RAW F55 Footage, Loads in CS6 as Black Screen

I downloaded and installed the Sony RAW plugin from Sony's web site, which is supposed to enable editing Sony RAW footage with a native, GPU accelerated sequence and rendering space. However, I'm getting a black screen when I import the footage. 2K footage shows up black, and 4K footage only gives me the initial frame and doesn't play, despite the pointer moving through the sequence during play. In the project pane, I can view preview thumbnails. When I restart Premiere CS6, and reload the project, "Adobe Premiere Pro CS6 has stopped working" pops up and I cannot proceed.
The GPU is nVidia GTX680 with 4GB. This is all running on Windows 7 64-bit. I've been able to edit other types of 4K footage such as ProRes, but this Sony CODEC isn't working for some reason.

do any of you can help in this?
First of all, AVI is a file container—not a compression format. Since you indicate, the file opens/plays in VLC, your first step is to determine the video codec that is giving you problems. Do this by opening the file in VLC and checking the media information and expanding the video stream. If the codec component is one commonly available for use on the Mac, then you can install it for use by QT. If not, you can try transcoding the video using VLC itself. If this fails, i.e., the output is visible but plays as though the frames had been re-ordered, as a last resort I would try transcoding the file using HandBrake.

Similar Messages

Video loading into iphoto as black screen

I have loaded videos from two different cameras. One is fine. The other loaded the videos as black screens. I have downloaded a divx converter per the owner of the camera but it still doesn't work.
When I go to Macintosh HD from my desktop and go to all movies. These movies are there and have a thumbnail that shows a picture. But when I click to play the movie it shows the black screen.
Please help, thanks.
Ben

Ben
This probably means that the Mac doesn’t have a codec appropriate for the video format. Try install Perian
Regards
TD

Yoshmite loading my iMAC with black screen.

Hi,
i have two iMacs and I've downloaded yoshmite on both of them. However, one iMAC loads with a white screen with apple logo and one screen loads up with a black screen and apple logo, yet they both have yoshmite. is this normal?

Ok, riddle solved: multiple hardware failure. It couldn't be fixed, so apple called immediatly and offered a new imac, new model as well, so I'm happy (if the new one works ). Must have been quite a tricky case, but I can't complain as i got a really good support during the time.
Hopefully the new one will arrive within the next week.

My phone is stuck on the loading sign with a black screen behind it ? any ideas how to fix it?

my iphone 3g is stuck on a loading sign with a black screen behind it as though it was switching off ..any ideas how to fix it?

Start here - http://www.apple.com/support/iphone/assistant/
"Frozen or unresponsive iPhone"

Adobe flash will not load - gives only a black screen

For all the (3) users on this computer.   For most browsers (Safari, Chrome, Firefox) The browser window goes 100% BLACK when a flash program link is opened and most of the time the cursor / Pointer freezes (occasionally disappears and all keyboard actions are blocked. Have to force quit or kill the box with the power key (which always bothers me.) No Adobe links work directly via the link in mail or in browser. Symptom in Mail is either the original window goes BLACK or a separate window opens in Black.
Current OS X 10.9.3 (13D65), Memory 4GB on 2.4 GHz Intel core i7 in MacBook Pro 15" Late 2011.
Relevant?? Items:
1.     The Adobe company checking device says Flash is not loaded. I have had flash 9, 10, 11, 12, & 13 working before the latest of   OS X upgrades were made.
2.     An aside, I recently (4 months ago) used a MacKeeper app. Today (not used except for information gathering) the "System Scan says my ProtectMac anti-virus is active and no security problems noted. Also noted was "Serious" issue relating to one of 128 issues (474.3 MB of 'junk' files-36.9 MB in 'Logs", 437.4 MB in Caches.) "Performance" listed as 'Fast.' No action is taken and System Scan app closed.
3.     I seem to have lost my copy of Flash 13 in the Applications folder and the install file tries to load "AdobeFlashPlayerInstaller_14_ltrosxd_aaa_aih.dmg"
This makes sense as to item 1. above.
4.      Another user loaded adobe flash 11 from a download file called, "AdobeFlashPlayerInstaller_11au_ltrosxd_aaa_aih.dmg." I do not understand the meaning of the part of the file name that reads "_11au_" as it seem to differ from other downloads for "_11eu_". Additionally the copy retained is filed in history and had only the user permissions of one user. Also that copy _11au_ has no mention of Browser Type in the name description of the .dmg file; but the "_11eu_" does mention Safari browser.   Since it was from July 8, 2013 I assume it doesn't matter and it should have been superseded by Flash 12 OSX. Mentioned here only for interest. Also, It may have been saved on this computer in case of rebuild for another user on the home network running 13" MacBook Pro 10.6 Leopard.
5. Attempts to reload Flash 13 from 'AdobeFlashPlayerInstaller_13au_ltrosxd_aaa_aih.dmg' as the "Adobe Flash Player Installer" connects to the latest version not yet installed and keeps downloading the Flash 14, which fails and locks up the browser.
6.     The download from get,Adobe.com starts out O.K. After the installer file.dmg completes well, Step 2. is to open it, that, too, works well with an open window of a mounted device on the desktop. The next step is to double-click the icon. That only works so far. A window opens and it has a progress thermometer but it never downloads any product and the link is declared "unavailable" immediately. Refuses to load and will not always give the pointer back or let the browser continue.
7.     While creating this 'Summary' something changed. Using Spotlight I found a different version of Flash Installer on my Mac. I clicked it to go to the Black screen after installer download competes and got a totally different response. I was set to take snapshots of the windows as they progressed. The ".dmg" Icon on the desktop changed from default plain white disk to the red "Flash Player" I had not seen for last 40 days.
Pic 1.     Pic 2.
Pic 1. is the desktop device icon.
Pic 2. is the Installer.
Pic 3. is the Acceptance popup. ~~Note: This popup shows a backwards rev dated March 4, 2012! today is 10 July, 2014.
Flash Player 11.6 is installing after acceptance of License.
Everything went normally and loaded but I cannot test it as all browsers were closed.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Viewing Slideshow in Bridge CS6 causes Black Screen

Not a question, just an observation that I don't know where else to report this.
I was using Bridge CS6 to view a folder of 200+ photos in Slideshow mode (Ctrl + L).
I was simply using the left and right arrow, occassionally the Spacebar, and marking about 25% of them as rejects by using the keyboard shortcut Alt + Delete.
Suddenly the entire monitor went black. No text message (not the Black Screen of Death), just black. I tried several standard Windows keyboard shortcuts to try to get a different view (Windows + Tab, Ctrl + Alt + Delete, etc.), but nothing worked. I could tell that the monitor was still functioning correctly by simply bringing up its on-screen menues. The only thing that I could do was to turn off the power to the computer. After rebooting, Windows, Photoshop, and Bridge all seemed to operate correctly (but I haven't yet gone back to Slideshow view).
I haven't had a program or Windows crash for months now, but I just installed Photoshop CS6 (not the extended version) late last week.
Windows 7 Home Premium 64-bit
nVidia GTX-460 video card with newest drivers installed (296.10)

I can't help with the black screen, but that sounds like a slightly risky way of cleaning out the rejects. I prefer to give non keepers a single star (Ctrl 1) and bring them up with the filters, so I can look through them one last time.
Just a thought, but there is a tenuous link with slide shows and projectors. I wonder if it went into external monitor only mode. (Windows key p) I have just tried it here, and was unable to make anything appear on my main screen. You'd be working blind, but a possible solution (if it happened again) would be to go Windows key p > right cursor key (once) > Enter. That would put you back into main monitor only mode.

My i phone is not working it just show a loading circle on a black screen.

my phone is not working.
i was charging it and open itz message inbox and suddenly it shown just a white circle of loading on a black screen.
i was try to switch on or off but nothing is working.

See Here for
Frozen or unresponsive iPhone
Try this First... You will not lose any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

Slow loading app on android - black screen

Ive developed a game with flash builder 4.5 as an actionscript mobile project (not a flex mobile project). The game runs fine on various devices (samsung galaxy/ htc desire etc) but is very slow to load initially. Loading takes up to 18 seconds during which time a black screen is displayed. Obviously this isnt ideal because it looks like the app has crashed.
So my questions are -
Is this a normal loading time for a pure action script app?
Can this be disguised by a loading or splash screen?
How can i speed up loading or disguise it?
Ive tried embedding the game swf in an as3 container, the container shows a loading screen but only when all assets are loaded so not much use.
Thanks in advance

ive since made a few observations....
1) Install app onto mobile using adb install myapp.apk . Launching initially on android the app takes 18 seconds ish to load. App plays fine. Now kill/ close the app. Relaunch the app. The app now launches in 2 seconds...
2) Relaunch the app several times and it loads in 2 seconds each time.
3) Turn off the mobile device for a few minutes. Switch back on. Launch app, app loads in 2 seconds.
4) Delete/ remove app from mobile device. Reinstall using adb install myapp.apk. Launching takes 18 seconds. Kill the app. Relaunching takes 2 seconds...
Like i say, no answers here but just a few observations...all i can assume from this is that as3 apps are very slow to run on initially, typically 18 seconds, but run fine ever after....??
Why is the app so slow to launch initially? If anyone has any thoughts on any of the above id be very interested to hear them.
Thanks in advance

My screen on the imac starts to load then goes to black screen when turned on

how do I reboot my desktop as when it turns on it starts to load then it goes to a black screen

I had the same issue with my 2008 iMac and Apple support walked me through a fix ...
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
Apparently it's an issue with an automatic update that never quite got past the login screen.
If this doesn't help then try reinstalling whatever version of OS X you are using.

Camera raw update problem loaded on cs6 32bit but not the default 64bit.

Hi to all.
Can you help? I recently updated to 8.8 camera raw after buying a new camera and there was a problem with the installation. It told me that there was a problem writing to cs6. I clicked ignore an the installation completed. The problem is that it has updated to the 32bit version but still shows 7.1 on the 64bit (default). I am running on windows 7 64 bit. Any hel[p with a solution would be appreciated.
Thanks
Update
I did a bit more research on the forum and found a discussion referring to pse which gave instruction to open the archive on the camera raw exe. file and manually copy the 8bi files into the correct location in the C drive eg:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS6\File Formats
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats and
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats
Wait for it this didn't work and completely removed camera raw from the about plugin menu on ps6 64 bit. It worked on cs6 32 bit.
The solution was to then reinstall the plugin via the installation .exe file and all was back as it should be. The only problen now is that adobe bridge has the camera raw preferences greyed out.....I am working on a fix for this and will post if I find it. I hope this helps someone.

Hi Michelle
I am new to the forum so I apologise. I should have mentioned in my update that the installer that fixed the problem was the ACR 9.0. I had originally used the 8.8 installer which caused the problem from ACR 7.1.
Initially the installer didn't work 64 bit version still had 7.1 but it installed ACR 9.0 on the 32 bit. I then proceeded to manually unzip the exe file ACR 9.0 and coped the 8bi file to the locations stated in my update. This didn't affect the 32 bit cs6 but completely removed ACR from the 64 bit. I re ran the ACR 9.0.exe file and everything was fixed.
I hope that this makes sense. I have now developed a problem on Bridge though. I can open raw file in photoshop but I can't view previews and the camera raw preferences are greyed out. I have read elsewhere that other people have had the same problem.

HT203433 My ipod will not open PDF files. I can't access any that are saved because when I click on it an icon appears like it is trying to load, but then a black screen appears and then back to home screen. Help???

I need help understanding why my ibooks app won't run. I have crochet patterns stored that I cannot view .
Please help?

I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

Will not load I see a black screen

Hi
At first I had just mono sound nothing from my surround sound then my son figured out but now!!
I get a black screen ??
I've tried almost all sorts of combo's on back of amp
Help please

Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have.

Sony Raw

Why doesn't photoshop 14 open Sony Raw that photoshop cc and cs6 open?

PS-CC is PS-14 so what are you asking?
Do a Help / About Plug-ins / Camera Raw and see what version of ACR that each of your PS’s has?
PS-CS6 is PS-13.x
PS-CC is PS-14.x
PS-CC-2014 would be PS-15 in the old naming scheme but now the version number is just the year.

Black screen and not load bios

I have same problem. Laptop start up battery and charger light are running. HDD and processor sound is hearing. But laptop not load bios and display black screen.
Laptop was running awsome but this problem is found when i try to install new hardware PCI Express Mini Card for wireless WAN. Before installing this hardware I go through bios and enable all radio devices. And than in display option I switch to internal card intead 0f switchable option. Then there is some fn setting in bios that I have enabled. After it I have restrat my laptop then it goes to black screen.. I've tried many tricks as mentioned above but problem is still there.
Plz someone help me
I will be very thankfull
Thanks

It sounds to me like the GPU is bad. Since you cant get RGB out to an external monitor.
Although Ive not heard of bad 9600m gt chipsets recently.
I have one in my machine as well and its almost two years old.
I have noticed that my GPU runs around 120 F most of the time. Not knowing if thats high but I wouldnt think so.
Just a thought, but have you tried pulling the battery for about 5 minutes. While its out, push the power button for a few seconds and then re-install battery. This may not do anything to help but I know on some devices thats a good way to get a clean re-start and clear memory completly. It certainly wont hurt anything to try.
If your machine was in deep sleep and just by chance fouled up, This procedure will clear the RAM!

ISO Adjustment for Sony RAW F5/F55

Is this an option? Is there a timeline for actual raw support and not just "Here's the metadata with ISO information, figure it out."

Thanks. Now it works in PP and AE.
Morten Lorentzen
+45 5342 0856
[email protected]
Den 20/01/2015 kl. 19.55 skrev Rick Gerard <[email protected]>:
I am trying to import for Sony RAW .mxf files in AE. I get an error message, cannot be imported - this.mxf file is damages or unsupported.
created by Rick Gerard in After Effects - View the full discussion
First, your AE needs to be updated. The current version is 12.2.1.5
If that does not fix the problem let us know.
Second question, are you using the Sony import utility? If not, give that a try. Last question, can you open the files in Premiere Pro? I hope you are not trying to cut a feature film in After Effects.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7114564#7114564 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7114564#7114564
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Sony RAW F55 Footage, Loads in CS6 as Black Screen

Similar Messages

Maybe you are looking for