Sony RPLCD TV not accepting HDMI connection from AppleTV
I have a rear projection LCD Sony KDF-55wf655 TV and have had it for years. I had my ATV hooked up to the TV through an HDMI switch in my AV closet. All was good, everything worked perfectly. I then decided to move my components out of the closet and under the TV. So now I have everything connected, just close to the TV. I cannot get the Sony TV to display the output from the ATV over HDMI. I connect the ATV via component and it works great. I take the ATV upstairs to my plasma and HDMI works great. I tried resetting the ATV to factory settings, didn't work. I tried resetting the Sony TV, didn't work. I tried unplugging and replugging everything in every order, didn't work. I'm not sure what else to do, but it seems it's something in the Sony TV not allowing the HDMI connection now...but why? What can I try? I'm desperate.
Anyone have any ideas I can try? Still would love to get HDMI working from my appletv on this one set. My Panasonic plasma has no issues playing HDMI from my ATV.
Similar Messages
-
HT1551 Old Sony TV does not have HDMI connection
I just received as a Xmas Gift a Apple TV Model A1427 that only has HDMI connectivity....but my Sony TV does not have HDMI. What can I do?
If you have component and audio plug sockets on your TV you need something like this
http://www.amazon.com/Lenkeng-LKV384-Component-Stereo-Converter/dp/B009C4R6PW -
I am not able to connect from my laptop to airplay mirroring equipment, icon is not showing on my laptop. It does show when I hook up a HDMI wire to the apple TV box.
I think you mean Ethernet, not HDMI wire. If the airplay icon is showing up when wired then that would indicate an issue with your wifi network.
-
Remote device will not accept the connection
Oh Windows 8...
I've been having computer issues for a while now, but I always figured it was the application I was using to access the internet. I first noticed an issue when trying to log into World of Warcraft. There was an obvious connection issue, but I could still
connect to my account. I contacted Blizzard about it, and nothing they told me to do helped me. This has been going on for nearly a month. Today, after not playing for a couple days, I realized I couldn't access the game at all. I blamed Blizzard again, and
became frustrated with them because none of their solutions ever helped me.
Today, instead of playing WoW, I tried to play Sims 4, which requires you to launch Origin, an application that uses the internet. Origin wouldn't let me connect either. A similar error to the one I experienced with World of Warcraft and its starter program
(BattleNet) appeared. Again, I blamed the provider of the application.
Still bored, I tried launching Steam, yet another gaming application that requires internet use. No, yet again I received a similar error to the other two. By now I figured it was an issue with the computer itself. I launched a connection test and it told
me that the "Remote device or resource will not accept the connection".
I tried launching Internet Explorer. I got the message that the "proxy server is not responding". I'm beyond frustrated. Thank god I also have Firefox installed, so here I am.
I looked up possible solutions to my issue. All the possible solutions I've found are only about Internet Explorer, and none of those solutions have helped anyone else with my issue.
So I guess it's on your end here. I have no use for this computer at all at this point. Help me out, please. I just recently bought this computer and I don't want to have to purchase another one to get away from Windows/Microsoft.Hi,
This issue can be caused by proxy settings or malware.
I suggest you to disable proxy settings. Follow these steps:
Under "Tools" in the browser tool bar select "Internet Options".
In the "Internet Options" window that pops up, click the "Connections" tab at the top.
Click "LAN Settings" near the bottom of the "Connections" section.
If the "Proxy server" checkbox is marked with a check, click it to deselect/uncheck it.
Click "Ok" to close the "Local Area Network (LAN) Settings" window.
Click "Ok" to close the "Internet Options" window.
Now check if you are able to connect to Internet Explorer.
You can download and run the Windows Malicious Removal Tool from the below mentioned link and run it on your computer:
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support -
Need to accept VPN connections from "Any"
I had previously been using two WRV54G wireless routers to establish a site to site VPN connection between a branch office and our corporate Headquarters. Because of the limited DHCP scope configuration options, I decided to "upgrade" to the WRVS4400N devices. I have now been able to establish the VPN again between the two new boxes but I've now gotten to the point where I would like to add an additional remote site. In the WRV54G, it was easy to configure the one at HQ to accept connections from "any" but this new router does not seem to be as simple.
Oh yeah, I am running firmware version 1.1.03 on both routers.
Does anyone have any idea how I can set up the HQ router to accept VPN connections from "any"?
Thanks! I appreciate the help.And this is the VPN log on the HQ router:
Mar 4 11:11:39 - [VPN Log]: "gatekeeper": cannot initiate connection without knowing peer IP address (kind=CK_TEMPLATE)
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:11:47 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: no acceptable Oakley Transform
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP) #4: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:11:47 - [VPN Log]: "gatekeeper"[4] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:11:57 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: no acceptable Oakley Transform
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP) #5: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:11:57 - [VPN Log]: "gatekeeper"[5] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Openswan (this version) cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [Dead Peer Detection]
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [RFC 3947] method set to=109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
Mar 4 11:12:17 - [VPN Log]: packet from (Remote router WAN IP):500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: responding to Main Mode from unknown peer (Remote router WAN IP)
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: Can't authenticate: no preshared key found for `(HQ Router WAN IP)' and `%any'. Attribute OAKLEY_AUTHENTICATION_METHOD
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: no acceptable Oakley Transform
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP) #6: sending notification NO_PROPOSAL_CHOSEN to (Remote router WAN IP):500
Mar 4 11:12:17 - [VPN Log]: "gatekeeper"[6] (Remote router WAN IP): deleting connection "gatekeeper" instance with peer (Remote router WAN IP) {isakmp=#0/ipsec=#0}
Thanks much. -
Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
Livecache database instance is not able to connect from DBMGUI
Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date Time PID Typ MsgID Label Message-Text
2009-06-12 03:10:43 2732 12902 XSERVER started, 'X64/SUN 7.6.04 Build 015-123-189-221'
2009-06-12 03:10:43 2732 12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732 12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732 12924 ENVIRON [1] start
2009-06-12 03:10:43 2732 12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732 12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732 12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON cpu time unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON number of processes 29995
2009-06-12 03:10:43 2732 12898 ENVIRON number of open files 2048
2009-06-12 03:10:43 2732 12898 ENVIRON core size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON file size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON heap memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON stack memory size 8192 KBytes
2009-06-12 03:10:43 2732 12898 ENVIRON virtual memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732 12898 ENVIRON PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732 12898 ENVIRON :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732 12898 ENVIRON IFS=
2009-06-12 03:10:43 0 0
2009-06-12 03:10:43 2732 12898 ENVIRON TZ=NZ
2009-06-12 03:10:43 2732 12898 ENVIRON TMP=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON TMPDIR=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON USER=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON LOGNAME=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34 137 12929 TASKING Task T114 started
2009-06-12 10:58:34 137 11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34 137 11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34 137 11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34 137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34 137 12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35 11 11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35 138 12929 TASKING Task T115 started
2009-06-12 10:58:35 138 11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35 138 11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35 138 11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35 138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35 138 12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36 11 11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36 139 12929 TASKING Task T116 started
2009-06-12 10:58:36 139 11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36 139 11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36 139 11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36 139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36 139 12827 COMMUNIC wait for connection T116 -
I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?
Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks! -
Apex link not able to connect from local machine.
Hi,
Here is the scenario.
I have installed oracle apex 3.2 in my vmware linux machine.
I'm able to connect the link (http://b03apex.domain.com) from my linux(vmware) box but I'm not able to connect from windows local machine.
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?
Need your suggestion.
Thanks, Muhammed.user9354175 wrote:
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.In that case, it means there is network connectivity. The problem is thus something else - like a firewall or name resolution failure.
>
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?No.
Can you ping the VM hostname from your Windows console (instead of IP address)?
Have you tried in your Windows browser the following URL (using IP address of the VM instead of the hostname)?
http://192.168.1.3/
Have you checked that your browser is not configured to use a proxy server?
Have you checked your Windows firewall for allowing tcp web traffic to the virtual machine?
Have you checked for the same on on the virtual machine (firewall will be likely be done using <i>iptables</i>). -
8600plus (OS X) will not accept print request from the registered add at hpconnect
HP 8600 plus OS X, will not accept a print request from the registered address at hpconnect but will print a request from the address that comes on the printer. I have tried to change the factory settings and i get a message from Hp connect that there is a printer error.
Hi Bill,
Bit of a strange error, I would recommend calling HP's team - they helped me out with my printer, and were very good:
HP Connected
ePrint
Instant Ink
Scheduled Delivery / Printable with automatic printing 855-785-2777 8am - 11pm EST Mon. - Fri.
10am - 6:30pm EST Sat.
U.S.: English (from link http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1)
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
SSLServerSocket that only accepts client connections from localhost
My end goal is to create an SSLServerSocket that will only accept client connections requested by localhost.
I've tried creating a new SocketPermission:
p1 = new SocketPermission("localhost:1024-65535", "listen,connect,accept")I am able to add it to a custom Policy's PermissionCollection, but it doesn't seem to work. I believe SecurityManager.checkAccept() only checks the host's name and not the client's...
This following code works and illustrates what I'm trying to achieve, but I'd like it to happen before the socket is actually accepted:
SSLSocket socket = (SSLSocket)m_sslServerSocket.accept();
Strintg clientIP = socket.getSession().getPeerHost();
if( !clientIP.equals( "127.0.0.1" ) & !clientIP.equals( InetAddress.getLocalHost().getHostAddress() )
// reject connection
}Any help is appreciated.
Edited by: misterE on Oct 24, 2007 10:46 PMI'm not clear whether you are doing this Permission thing on the server side or the client side, and/or whether you have a SecurityManager installed.
If the server only has SocketPermission("localhost:...", "listen,connect,accept") it should only accept connections from localhost, not from B. So I don't know why the first scenario worked.
If the server only has this SocketPermission with some other hostname, it shouldn't be able to listen at any port. So I don't know why the first scenario worked.
Unless there is no security manager installed.
You can run it with -Djava.security.debug=access,failure to see what permission checks are being executed.
BTW because connections are accepted by the TCP stack before permission checking takes place, as described above, the client won't get a ConnectionException if the permission is refused at the server: it will get most probably a SocketConnection: connection reset by peer when writing to the server. -
I'm not able to connect from 9.2 client to 8.1.7.0 database through ODBC
Hi,
I'm trying to connect from ORACLE 9.2 client to 8.1.7 DATABASE. The client is on WINDOWS XP. But I'm getting connection timed out error message. What's wrong with that ?Can you connect to the 8.1.7 database from other clients? Can you verify that the listner is up?
Can the 9.2 client connect to some database?
I'm guessing that the 8.1.7 database listner isn't up or that the tnsnames on your client isn't set up correctly.
Justin Hi Justin,
1) I am able to connect to 8.1.7 database from other clients.
2)The 9.2 client is able to connect to some other database on the network which is 8.1.6.2.
3) I have cut and pasted tnsnames.ora from the working client( but that client is 8i client ).
4) this is the first time I am using this kind of configuration i.e., trying to access 8.1.7 server from 9.2 client. I tried to create new connection through NET CONFIGURATION ASSISTANT as per the documentation but it's not working. -
Not able to connect from SQL PLUS
Hi All,
I am able to connect from sqlplus.exe which is server db_home but when try to connect from sqlplus.exe which is in client_home ,getting following error
ORA-12560: TNS:protocol adapter error
I tried 'C:\app\client_home\sqlplus.exe system/system@orcl' getting following error
ORA-12154: TNS:could not resolve the connect identifier specified.
tnsping results:
TNS Ping Utility for 64-bit Windows: Version 12.1.0.1.0 - Production on 21-APR-2015 19:32:01
Copyright (c) 1997, 2013, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl140848)))
OK (10 msec).
Can someone help on this.
Regards,
Amar.1011004 wrote:
Hi All,
I am able to connect from sqlplus.exe which is server db_home but when try to connect from sqlplus.exe which is in client_home ,getting following error
ORA-12560: TNS:protocol adapter error
I tried 'C:\app\client_home\sqlplus.exe system/system@orcl' getting following error
ORA-12154: TNS:could not resolve the connect identifier specified.
This error is FULLY explained at (ora-12154 TNS:could not resolve the connect identifier specified)
tnsping results:
TNS Ping Utility for 64-bit Windows: Version 12.1.0.1.0 - Production on 21-APR-2015 19:32:01
Copyright (c) 1997, 2013, Oracle. All rights reserved.
Used parameter files:
C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl140848)))
OK (10 msec).
Can someone help on this.
Regards,
Amar.
Since tnsping did NOT return an error, we know that you did not tnsping 'orcl', which is what you tried to connect to with sqlplus. Show us the actual tnsping command. -
10.5 - 10.6.2: Postfix not accepting e-mails from certain hosts
Hi
Two days ago we migrated our server from 10.5 Server to a new Mac mini server running 10.6.2 server.
We are now facing the problem that postfix refuses to accept incoming e-mails from most hosts. Some hosts seem to be able to get through, but so far we haven't be able to identify a pattern.
The transfers just times out with various error messages. Below is one of the shorter transscripts. Any ideas where to start looking?
Feb 5 18:36:12 www postfix/smtpd[34067]: connect from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:12 www postfix/smtpd[34067]: setting up TLS connection from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:13 www postfix/smtpd[34067]: Anonymous TLS connection established from pluto2-mail.kagi.com[67.134.14.166]: TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)
Feb 5 18:36:14 www postfix/smtpd[34067]: 42ABB92A50: client=pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: warning: networkbiopairinterop: error reading 5 bytes from the network: Connection reset by peer
Feb 5 18:41:14 www postfix/smtpd[34067]: timeout after DATA (986 bytes) from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: disconnect from pluto2-mail.kagi.com[67.134.14.166]
Thanks,
IljaHi again,
I was able to further narrow down the problem. The remote server is sending a complete message but postfix on our mac doesn't recognize the end of message token, thus timing out the connection after 5 minutes.
Any ideas? Is this a postfix issue? If so, what can we do about it.
<pre>
0x02e0: 2039 3437 3039 2d31 3430 3520 2055 5341 .94709-1405..USA
0x02f0: 0d0a 5351 4e4d 2d6b 6167 6920 3531 3530 ..SQNM-kagi.5150
0x0300: 0d0a 0d0a 0d0a 0d0a 0d0a 5343 2d54 4659 ..........SC-TFY
0x0310: 5020 352e 3068 0d0a 2e0d 0a P.5.0h.....
19:43:28.538241 IP (tos 0x0, ttl 64, id 8917, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->9605)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [.], cksum 0x8210 (incorrect -> 0x4852), seq 291, ack 1186, win 33304, options [nop,nop,TS val 928896121 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 22d5 4000 4006 0000 6d46 c4f2 E..@".@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b010 8218 8210 0000 0101 080a 375d d479 ............7].y
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
<pre>
19:48:28.318858 IP (tos 0x0, ttl 64, id 27393, offset 0, flags [DF], proto TCP (6), length 118, bad cksum 0 (->4da3)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [P.], cksum 0x8246 (incorrect -> 0x0c90), seq 291:345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 54
0x0000: 4500 0076 6b01 4000 4006 0000 6d46 c4f2 E..vk.@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b018 8218 8246 0000 0101 080a 375d e02d .....F......7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
0x0040: 3432 3120 342e 342e 3220 7777 772e 6977 421.4.4.2.www.iw
0x0050: 6173 636f 6469 6e67 2e63 6f6d 2045 7272 ascoding.com.Err
0x0060: 6f72 3a20 7469 6d65 6f75 7420 6578 6365 or:.timeout.exce
0x0070: 6564 6564 0d0a eded..
19:48:28.321859 IP (tos 0x0, ttl 64, id 46435, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->377)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [F.], cksum 0x8210 (incorrect -> 0x3c67), seq 345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 b563 4000 4006 0000 6d46 c4f2 [email protected]@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 06bb d895 c111 C.......h^......
0x0020: b011 8218 8210 0000 0101 080a 375d e02d ............7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
Regards,
Ilja
Maybe you are looking for
-
General Overview on How to use Final Cut Studio to create a Blu-Ray DVD
I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took
-
How to get the details of a LUN (Storage Logical Units) presented to an ESX host thru SCVMM 2012
Hi, We are working with a UI Add-in for SCVMM 2012 where we should support both Hyper-v and ESX hosts. When added the ESX host and presented few LUNs (out of band operation) from the HP 3PAR array, we are unable to view the Storage details like Stora
-
If I turn off Mac Mini Mid2011, LED doesn't turn black.
I turned off the Mac Mini Mid 2011. BUT, the Mac Mini's Light(White LED) doesn't want to turn off and the only way to COMPLETELY shut down is to force shut down.I'm worrying about bad sectors so I'm asking. Is there any way to solve?
-
How do I get my home page back and uninstall "home.mywebsearch"?
When I open up Mozilla Firefox the home page has been changed from "comcast.net" to "http://home.mywebsearch.com/index... Is this from Firefox? What happened to my homepage? What is this page, and how do I go back to the home page comcast.net? Who is
-
Oracle B2B 10g Remote Trading Partner Configuration
Hi All, How to create a Business Action in operational capabilities of remote trading partner for the exchange of custom xml document betwenn trading partners. Also please suggest any document where we can follow the steps for creating trading partne