Sony SR-11 video "backjerks" in Project viewer but not Log Transfer viewer

For example, in both the project canvas and viewer, people's heads may be turning to the right in the frames leading up to "backjerk" frame and again after the "backjerk" frame, but their heads jerk to the left at the "backjerk" frame. For example,for clip 805:
Frame
06:24 normal progression
07:00 - 07:06 normal progression
07:07 picture jumps back to same image as frame 07:00
07.08 picture jumps forward to expected image after frame 07:06
07:09 - 07:19 normal progression
07:20 picture jumps back to same image as frame 07:13
07:21 picture jumps forward to expected image after frame 07:19
The "backjerk" frames move 1 frame with each succeeding frame count of 24. Hence in the next batch of 24 frames, the "backjerk" frames are 08:08 and 08:21, and so on.
When viewed in the Log and Transfer Viewer or camcorder, there is no "backjerk". Quicktime was unable to open the files copied directly from the camcorder stream. Quicktime could open the files after transfer and saving but had the same "backjerk" problem.
The video was recorded on a Sony SR-11 at 25 fps, AVCHD 1920x1080 and transferred to FCE using Log and Transfer. Capture did not work due to lack of firewire connection. The clips appeared in the Log and Transfer Window, were dragged to the lower area where "drag media here" appeared, and were saved in a project.
When the clips were dragged to the canvas in the project, I tried both yes and no to the question as to whether I wanted to change the format to be compatible with the External Video. Neither worked.
The Easy set up is "HD", "25 fps" and "AVCHD Apple Intermediate Codec/50".
FCE is version 4.0.1. Computer is MacPro, OS X Version 10.5.7; Processor: 2 x 2.26 GHz Quad-Core Intel Xeon. Memory: 6GB 1066 MHz DDR3, 170 GB of memory available on HD
Any suggestions?

maresol wrote:
Dear Tom,
I don't think your questions were directed at me or ?
If you look at the header of each thread you will see an "in response to" with a name attached. That's helpful in figuring out who's talkng to who. It's a good idea to start a seperate thread for questions, piggy backing can get a bit confusing.
What are the Sequnce settings that these clips are used in?
HDV-Apple Intermediate Codec 1080i60 should be the one.
Al

Similar Messages

How come I can see my div in design view but not in live view

Hi,
I have a div ID called "portfolio" that I can see in design view but not live view or on a browser. It's a little pink square and I want that square round also.
I ran it through validator. It picked up some things in the style.css which I changed and the boilerplate.css that I did not. Because I thought DW auto creates code for boilerplate because I don't enter that code myself.
It's also rejecting a lot of webkit code but this seems like standard webkit code that works elsewhere on the page.
BTW: at what point does this brutal hand coding pay off in money and less heartache when Wordpress looks cleaner and is so much easier to use? I feel like I barely know HTML or CSS in terms of translating vision to reality and with all-browser functionality after months and months of on-line classes. How long are the pros at it till they reach a watershed point?
here's my address: http://www.adjacentdimensionsmedia.com/home.html
Here's my html:
<body>
<div class="gridContainer clearfix">
    <div id="div1" class="fluid"><img src="adtitle2.png" width="700" height="80" alt=""/></div>
<div class="fluid"><div class="box-shad"><a href="index.html"></a></div>
</div>
    <div id="portfolio">Portfolio</div>
</body>
Here's my CSS:
.box-shad {
margin-top: 200px;
margin-left: 100px;
width: 900px;
height: 700px;
display: block;
background-image: url("images/Big-tree-trans1.png");
background-size: 900px 700px;
-webkit-box-shadow: 15px 15px 15px #000000 inset;
box-shadow: 15px 15px 15px #000000 inset;
-webkit-border-radius: 50%;
border-radius: 50%;
position: fixed;
.box-shad a {
    display:block;
    width:900px;
    height:700px;
#portfolio {
width: 100px;
height: 100px;
margin-top: 0px;
margin-right: 200px;
margin-left: 200px;
margin-bottom: 0px;
border-radius: 75%;
-webkit-border-radius: 75% 75%;
background: pink;
top: -300px;
position: relative;

The top:-300 is putting that div above the top of the browser viewport. Fix that and you'll see the div.

Webforms visible in project view but not in browser view

Hi all
I have a problem:
We have a Yearly Task list with several webforms. Now, if I try to open the webforms in the normal project view everything works fine. But if I click the same Webform when I am in the browser view/tasklists/Yearly, I get the following Error message.
Requested document does not exist.
Show Details:
Error Reference Number: {A9C8569B-EC64-4A6D-8FEB-897DA44ECF5C};User Name: 20354@MSAD
Num: 0x80042781;Type: 0;DTime: 02.02.2009 11:58:29;Svr: ZRHCHL60;File: CHsvDSReports.cpp;Line: 626;Ver: 9.3.1.0.1502;
Num: 0x80042781;Type: 0;DTime: 02.02.2009 11:58:29;Svr: ZRHCHL60;File: CHsvReports.cpp;Line: 1538;Ver: 9.3.1.0.1502;
Num: 0x80042781;Type: 0;DTime: 02.02.2009 11:58:29;Svr: ZRHCHL60;File: CHsvReports.cpp;Line: 1081;Ver: 9.3.1.0.1502;
Num: 0x80042781;Type: 0;DTime: 02.02.2009 11:58:29;Svr: ZRHCHE62;File: CHFMwManageDocuments.cpp;Line: 1340;Ver: 9.3.1.0.1502;
Strangely, this only happens with the webforms that I have added more recently. The older webforms work fine also in the browser view.
Thanks

Hi all,
We try to import Webforms from an application in a new application , inside a folder hierarchy.
There was the same error when we want to access to any documents.
The folder was created by an Active Directory User (With All rights).
I have created a Folder with a Native Account (With All Rights) , and access to the document is now available.
I hope this workaround, will help Oracle to understand the root cause.
Regards.

Help..Flash Videos work for Chrome/IE but NOT Firefox

So I cannot see some flash videos on Firefox (like sites CNet & Disney do not work) which use flash. It does work on Chrome & IE.
1. ALL Programs are the newest/latest versions.
2. I removed and downloaded all programs- restarted the computer after each download.
3. I have the latest Flash (according to the website) when I view the Adobe Flash Website on Firefox.
I don't know why some flash videos work...and some do not.
I am running Vista. All my programs are legit...and I do have McAfee running..I don't download porn, no viruses etc.. Anyone have advice?!!

ok ok
I disabled firewall which - for some weird reason- allow it to play in Firefox. Videos played in IE & Chrome- but not in Firefox, until I disabled Firewall..weird.

I purchased some movies off iTunes from my account from my fathers IPad as a gift but didn't realize can not view if not logged with my account. Is there any way to save directly to the IPad (regardless of account)? Or transfer to him so he can view have?

I purchased some movies off iTunes from my account (but from my father IPad) to download as a gift,
but didn't realize he can not view if not logged in with my account.
Is there any way to save directly to the IPad (regardless of account) so he can view?
Or transfer to his account?
Or is any was to cancel the recent purchase if can not transfer as I will not watch these myself?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

HT2513 my iCal shows events in the "month" view but not in the "week" view? why is that?

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

my iCal shows events in the "month" view but not in the "week" view? why is that? doesnt sync automatically all the time only sometimes

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

I have a pdf file, how do it ONLY View but not can get changed, I mean locked

I have a pdf file, how do it ONLY View but not can get changed, I mean locked?

Use the Security tab in the properties of the document.

Help with Importing psd's, looks good in viewer, but not in canvas...

I have been searching for threads related to this issue, and this is what i've come up with...
It is my sequence settings, the picture looks great in the viewer but not in the canvas, as soon as i put it in the timeline, it goes blurry almost. I tried changing my settings to HD 16:9 and the picture looks great, but I need standard (NTSC DV 4:3), does anyone know a way around this? I can do it in Avid fine, why am I having such a hard time in FCP?
Thanks
P.S i have tried changing my image size in photoshop to 720x480 and 720x540 and it doesn't seem to make a difference.
Jana

The canvas is a low resolution proxy.
What does your sequence looking like on your NTSC production monitor?

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?

ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Why is Image in design view but not in browser?

Why when I insert an image from root folder it shows in design but not in live view or browser? I have opened a new blank html page and still no image will show up.

Do you have an editable region in your main Template head tags?
Just so you know. Making a template out of an HTML document is just about the last step in your design process.
First build your prototype.html page so that everything performs well in all browsers. When you're completely satisfied with how it looks, then Save As Template.dwt.
Add editable regions for content that will change from page to page.
Spawn New page from template and save as index.html for your home page. Repeat for other site pages.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

My Javascript works in Dreamweaver Live View, But Not On The Server

I set up a javascript function to set the focus to the first field in a form as the page loads. It works fine in Dreamweaver's Live View, but not on the local or remote servers. Here's the code:
In the heading I have the following function:
<script type="text/javascript">
function setFocus()
document.getElementById("firstname").focus();
</script>
In the <head tag, I have:
<body onload="setFocus()" ...
and the first field in the form is:
            <input name="firstname" type="text" id="firstname" style="text-align: center; color: #009; text-transform: capitalize; font-variant: normal; font-weight: bold; line-height: normal; font-style: normal; font-size: 14px; font-family: Arial, Helvetica, sans-serif;" tabindex="1" value="<?php echo $fstname; ?>" size="15" maxlength="20">
I guess I must be missing something, but don't know what.

EUREKA! (and OOOPPPPSS!) I found the problem (and I thought javascript was case sensitive - according to the tutorial, it's supposed to be).
Here's apparently wha hoppen. The first field in the form is the person's first name, but it's also a SPRY validation field. I gave the actual field the name and id of "firstname", and the SPRY validation the name "FirstName", figuring that scripts would be case sensitive. In fact, when I first inserted the SPRY object, I tried to name it "firstname" also, but it wouldn't let me, so I capitalized the first letters, and it accepted that; that made me feel that this is OK. Here's the entire field's code:          <label>First Name:
           <span id="FirstName">
            <input name="fstname" type="text" id="fstname" style="text-align: center; color: #009; text-transform: capitalize; font-variant: normal; font-weight: bold; line-height: normal; font-style: normal; font-size: 14px; font-family: Arial, Helvetica, sans-serif;" tabindex="1" value="<?php echo $fstname; ?>" size="15" maxlength="20">
            <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldMinCharsMsg">Minimum number of characters not met.</span></span></label>
I accidentally tripped over the answer when I started using the Dreamweaver's Edit>Find Next search to see if I had something else named "firstname", and I found that it located every permutation of that word (e.g. firstname, FirstName, FIRSTNAME etc.). Having seen that, I tried changing the "name=" and "id=" to "fstname, and the same corresponding change in the javascript, and VOILA! it worked. That leaves me rather curious about this alleged "case sensitivity" thing. I get the impression that it IS case sensitive, except when IT'S NOT. How does this work, and how do I know when it is and isn't?

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

1080i video looks good on iMac but not on small movie screen

I have a 1080i video that I exported as a default 1440 x 1080 @ 59.94 fps. If I play the video on my iMac, which is 1920x1080, it looks good, but when I play it on a smaller movie screen you can really see the interlacing. I tried highlighting all my film on the primary timeline, going to Info --> Settings View from the dropdown box at the bottom, and then setting:
Roles: Video & Dialogue
Timecode Display: Drop Frame
Alpha Handling: None/Ignore Alpha
Field Dominance Override: Lower First
When I export and play that it looks pretty much the same, if not worse. I'm thinking that Drop Frame probably isn't good, but it still has the interlaced look.
Does anyone have any suggestions?

How'd you do that?
I just imported it from the camera. Again, I messed up earlier as it originally imported at 29.97.
How'd you do that? What format is your media exactly? Codec and complete specs.
Codecs: H.264, Linear PCM
Frame Size: 1440 × 1080
Video Frame Rate: 29.97
Video Field Dominance: Upper
Well, that's interesting. I didn't realize it told me what the Field Dominance is. Now I know not to use Lower.
Why should I not change the Field Dominance? Also, I was reading another post where a guy tried copying his videos from one project, 1080i, to another project, 1080p, and he was not successful. Have you tried this or heard of anyone being successful doing this? Thanks.

Sony SR-11 video "backjerks" in Project viewer but not Log Transfer viewer

Similar Messages

Maybe you are looking for