Sony SR100 Camera support but not detected!!!???

The first time I started iMovie 08 I don't recall what I did, it just worked and importing video from my Sony SR100 worked perfect. That was the fist and last time.
No matter what I try now it will not see the camera. Only iphoto sees it as "noname" and will let me import photos only.
If you are thinking this new version will work with Sony, forget it. I've spent hours trying to figure it out and nothing found.

just an update. I found that if the camera is on before starting imovie it will detect is and let you import however imove crashes all the time before it is finished.
Bugs bugs bugs ..... save your money.

Similar Messages

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blur

Suddenly all my albums in Photos are blank. The photos are still in the camera roll but not in the albums. What happened and how do I recover them all? Are they in my icloud? Also the photos are clear as thumprints but when I touch it to zoom are blurry. what gives? They were all completely clear and in the albums when I last used my ipad?? Would doing the "Reset" under General settings do that? When I returned from Europe I reset my ipad to get it in the right time zone etc.

Reboot. Press and hold the home and sleep buttons until the apple logo appears. Ignore the red slider.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

I assume you have Photostream on, correct?
In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection. Both of these criteria must be met before the sync occurs.

How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

How did the photos get onto the phone ? Only photos taken with the phone or saved from emails/websites etc can be deleted directly on the device. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/

I5 photo shows on camera icon but not in photos icon

i5 photo shows on camera icon but not in photos icon

Was your phone locked or unlocked when you used the camera?
If your phone was locked and you used the camera the picture will be in the camera, once you have unlocked your phone then you will see the pic in the photos - camera roll.

HT201302 I need more space on my iPhone to update to iOS 7.0.6. I was able to import and then delete my Camera Roll but not my Photo Library. How do I do that?

I need more space on my iPhone to update to iOS 7.0.6. I was able to import and then delete my Camera Roll but not my Photo Library. How do I do that?

To delete your photo library you need to connect to iTunes, then remove the selection for the images, then sync the device.
While you are connected to iTunes do the update through iTunes. It takes much less memory as the update is loaded onto your computer, unpacked, then sent to the device.

I have a new computer, my songs came over, but not my playlists?

i have a new computer, my songs came over, but not my playlists?

See this migrate iTunes library post.
tt2

My iPhone 4 just suddenly deleted all my contacts ? I turned my phone on off and some came back but not all of them ??

I was using my iPhone got a text opened in and all my contact names had gone went into my contact and it had deleted them all . I turned my phone on and off and 100 came back but not most off them what do I do ?

I suggest you immediately make a backup of your data. You don't know if or when the computer will show some symptoms from the drop. You may want to, for piece of mind, take the computer to an authorised service center for assessment. No one here can assess any internal damage you may have done.

Live cam sync detected by Win XP but not detect by "Live! Cam Sync (VF0520) Starter Pack"

When I connect cam to my USB port It is detected by the system and working properly when running from My computer(USB Image Device #2). But when I am installing the software "Creative Live! Cam Sync (VF0520) Starter Pack 2.00.18" then it says "Setup is unable to detect a supported product on your system".
When I connect the cam first time to the system It create instance (USB Image Device) in my computer and works fine and software was also installed to the system.Then I ran my software it shows parental control image and did not detect any image then I plug-out cam from the usb port and then plug-into different usb port the new instance(USB image Device #2) after this software not detect the camera. I uninstall the software then I trying to reinstall again but It not detect the camera and shows error "Setup is unable to detect a supported product on your system" while my cam is attached to the usb port.
Hope you understand my problem. Thanks in advance.
I used Windows XP professional service pack 2

buddy, sorry but i have bad news for u .... i had the same problem .... i contacted the customer support and they kept tossing me around between tham asking me to do this and that and the other thing and none of them worked .... ok .... i had to exchange the cam from where i bought it .... the replacement workd for two days .... and then broke off again the same way the first one did .... its cheaply manufactured cam is what it is all about .... i contacted them again .... anyway the last email they sent me saying that they had escalated the problem for more investigation and i did not hear anything from them till now .... and by the way it doesnt matter what operating system u r using .... i used on windows 7 and xp sp3

I connect video camera to mac mini, but not detected firewire

i have mac mini. I connect a video camera to my computer via firewire. i try capture video in fcp and imovi, but firewire not detected. when i open imovy and import video, then show the massage "camera not connected". please help me.

No, nothing will show on the desktop - that only happens with card-based cameras (which are usually connected via USB).
But, make sure your camera is turned on, and in playback mode. Do you have another Firewire cable you can test, in case that cable is bad? Try also the tips in this document:
http://support.apple.com/kb/TS1059#2
Matt

Airport card works in 10.1, HW test passes, but not detected at all in 10.4

Ok, Hi. I'll first admit this is my first post so go easy on me!
I just bought a used iBook G3 and it was working fine for a while until about a month ago when all kinds of weird things stared happening. Some of which those problems I solved from reading previous topics from these forums - but anyways, I'll skip all my other problems and get right to my current one.
First off here is the complete specs:
12.1" iBook G3 "dual USB series"
500MHz PPC processor
128+256MB ram = 384MB RAM
15GB hard drive (NOW 160GB HARD DRIVE!)
No Airport Card (NOW ONE HAS BEEN ADDED!)
Multiple OS's - OS9 and 10.1 were included (have original disks)
I also have a set of 10.4 Tiger CD-ROM disks
Anyways, here is basically what is happening. I bought an Airport card off eBay for my iBook. I installed it about a week ago. I booted into 10.4 Tiger and it did not detect the card. Tried to do the manual setup with the wizard and it said there was no card attached. I went into the system profiler and is said No info available under the airport section. I then booted to my "apple hardware test disk" and ran the full/extended test. It passed everything (including the Airport card) so I know that is not the problem. I then booted into OS X 10.1 and lone behold the card is detected and is working without any fooling around with! Instant wireless internet! So I know that the card is working, but I want to use it in Tiger as 10.1 is almost worthless. So I boot into Tiger again knowing that the card is working, and Tiger still does not recognize it! I even booted into OS 9 and it detected the card (although it was having some connection problems, but at least I know that it IS detecting it.)
Here is what I tried (so you can cross these suggestions off your list! lol)
I've deleted the Airport "ktext" files, etc. (can't remember the actual names of the files, but I've cleared all of those caches and still no luck.)
I've zapped PRAM
I rest NVRAM
I rest the PMU.
I did a Arcive and install of 10.4
...All of which did not help. Again, the card worked in 10.1, but 10.4 is completely blind and can't find it!
Now we are caught up to today. I was having many other odd problems and it all lead to my hard drive probably being bad. So toady I finally bit the bullet and bought a new hard drive from Best Buy. It took me forever to install it, but I did it, and it works! Now I have 160GB (make that only 128GB detected) of space. I partitioned it 4 ways as well:
"Tiger" - 80GB
"Other OS" - 30GB
"Extra Space 1" - 10GB
"Extra Space 2" - 8GB
xxxxxxxxxxxxxxxx- 128GB Total
So now that I have a new hard drive (that I was told would fix all of my problems because my old one was "bad" I thought I would have it working today, but no. So I put in the brand new drive, partitioned it, booted off my Tiger disk, installed it on the 80GB partition. The install went fine. So I now have 10.4 on the new drive. Seems to be a lot faster then my old drive! I did the combo updater (which I downloaded on my iMac and transfered to a flash drive and loaded on to my iBook) Ran the updater, and now it is running 10.4.11! But then I realized, the Airport card is STILL not detected in Tiger!!! - I thought the new hard drive would solve all my problems as I was staring from scratch, but no, there is still a problem!
I ran the Apple hardware test disk again, full test, and it said my Airport card is still fine. I didn't reinstall 10.1 yet (nor did I want to, I was hoping Tiger would work for what I wanted) but it seems now that I might have to go back and install 10.1 again. I don't know what it will prove - other then it will work again, but I don't want to use 10.1 so I'm not going to bother doing all that again.
Anyways, after looking into this further, I brought up the system boot log (of tiger) and found these lines interesting, and hopefully useful to you guys:
localhost kernel[0]: AirPortFirmware: start Sta f/w download
localhost kernel[0]: AirPortDriver: F/W download failed
localhost kernel[0]: AirPortFirmware: start Sta f/w download
localhost DirectoryService[64]: Lunched version 1.8 (v346)
localhost kernel[0]: AirPortDriver: F/W download failed
it then lists the eithernet address and then ramblers on about other nonsense. If anyone needs the other "stuff" i'll try and save the whole log file and attach it here if anyone needs it.
So could anyone please help? It seems as if i've done everything, and still can not get an answer on why it is doing this, and how to fix it!
Please Help!
Thanks you so much, and sorry for the long yet detailed message!!!
-Scott

Hey, just wanted to post an update to let everyone know what I ended up doing.
Bottom line with the airport card I had is that is was "bad" - well only kind of. I got an email from a guy from a local PC repair shop. He told me he had just gotten one of those cards in and had it for sale for only $25. So I was chatting with this guy and he said it would be alright if I brought my iBook right in his shop, swap the cards and try it before I buy it. So I did so. Very nice guy and we swapped out the cards no problem. Right away it recognized his card and worked! I then downloaded the Airport update and ran it. (remember before, when I tried to update my card, after it restarted it was no longer recognized.) So we did the update with HIS card in and after it restarted, it STILL worked! It also added WPA support as well! We then booted into to Tiger (remember the old card wasn't recognized at all in tiger) and it ALSO worked in Tiger! I also had WPA support right away! So I bought the card and was all happy that it was all working again! I then figured out what the problem was with the old one.
My original card was one of the "original" originals. Then, Apple "changed" the original cards and replaced ones with "128bit" support. (this is all before the extreme cards) I then found out that the newer original cards (the one the guy just sold me) are worth MORE because these are the cards that are compatible with the newer update (128bit WEP, and WPA) The cards looked exactly the same, but the newer card has "128 Bit" printed on the bottom of the card.
SO, it ended up, I was "asking too much" out of the card I had - as the card I had did not support what I was trying for it to do. Where as the newer card I bought IS compatible with the update, and worked like a piece of cake. So all in all, the first card I had isn't "dead" it just wasn't working with what I wanted it to. So I'm going to end up selling it. Hopefully craigslist, but I will get more for it on eBay. so that is what I'm going to do. I'll just make sure to tell people this "story" so they don't try and do the same thing I did. But for someone with an even older laptop, an older OS, or an older router, this card will work just fine for them.
So thats basically it! Looks like I got everything working!
-Scott
Message was edited by: sdschramm

Sony SR100 Camera support but not detected!!!???

Similar Messages

Maybe you are looking for