Sony SRS-X7 Compatability with iPhone 6

Does anyone know if the SRS-X7 wireless speaker works with an iphone 6?
I tried calling customer support but they not helpful at all.  They could only read the back of the box back to me which doesn't list the iphone 6 as being compatible.
I am wondering if it actually isnt't compatabile or if the box was printed before the iphone  6 was released.
Thanks!

Hi jstern,
Here are the compatible apple products to this device.
AirPlay connection compatible models
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPhone 4
iPhone 3GS
iPad Air*
iPad mini with Retina display*
iPad (4th generation)*
iPad mini*
iPad (3rd generation)*
iPad 2*
iPad*
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)*
BLUETOOTH connection compatible models
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
Help Guide
How to Use
214iPhone 4
iPhone 3GS
iPad Air*
iPad mini with Retina display*
iPad (4th generation)*
iPad mini*
iPad (3rd generation)*
iPad 2*
iPad*
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)*
iPod nano (7th generation)
Thanks.
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • Does the Sony Smart Watch work with iPhone 4S?

    Solved!
    Go to Solution.

    Hello Penny,
    Welcome to the Sony Community.
    The Sony Smart Watch doesn't work with iPhone 4S but however it's compatible with most Android™ (2.0 and above) phones via Bluetooth® connection. See www.store.sony.com for details.
    Regards,
    Charlie

  • Backup was corrupt or not compatable with iphone

    backup was corrupt or not compatable with iphone

    The same happen to me in a iPhone 4, trying to upgrade from ios 6.1.3 to ios 7.0.4.
    I have make three backups of my iphone, then I have restore firmware with the new ios, and when I have try to restore my backup, after two minutes I get this error... tested with all the backups happens the same.
    I have 3 iphones, and this only happened in one of them... but it's not the first time that I lose data when apple backup software tell me that all my backups are ok... and they aren't... I like a lot of apple products (I have 3 iphones, 1 ipad, apple tv and 4 apple computers), and they work well... but having two backup problems with diferent devices... I begin to think that backup in apple it's not good enough...
    Regards.

  • Sim not supported,but was sent micro sim thats compatable with iphone ..now what?

    Have iphone 4 with no sim card. so contacted vodafone whom i have a contract with and arranged to transfer my existing mob num to a micro sim card to use in apple iphone4 . Once received connected to itunes .. picked up the iphone but said iphone was in recovery mode and click on restore. I have done that loads of times now and everytime it ends saying your sim is not compatable. Rang Vodafone as was so cross as the sim also wouldn't work in my old phone either ! even when clicked into the normal sim sized card.
    Anyway , that was yesterday and was told don't worry your micro sim isn't activated correctly yet ..remove sim .. wait 24hours ,put sim back in and it will work . well it hasn't made the slightest  bit of difference except when i put the microsim back in old phone .. it now works on that!
    can anyone tell me have i done anything wrong? ... do i need to download any software first ?  Would it make any difference if itunes were already installed on home pc to under my partners name? .. I have tried installing itunes to link to just me but thats just reverting back to itunes already installed !
    if i took to a mob shop .. could they help ?  hope someone can give me some answers  

    Where did you get the phone. An "unsupported SIM" message indicates the phone is locked to a carrier other than the one you are trying to use. ONLY the carrier it is locked to can authorize unlocking it. DO NOT take it to a mobile phone shop that tell you they can unlock it. They can not legitimately do so. All they can do is hack/jailbreak the phone. This will void any warranty as well as forteit your right to support from Apple or on these forums. It can also cause stability and security problems and you will NOT be able to update the OS without re-locking it.

  • Waiting for Activation i have an iphone 3g. iphone is from my old contract and i have given it to my girlfriend. she then went to the O2 store and they gave her a new sim card which is compatable with iphone 3g. O2 have told me the phone is not blocked.

    " fault code,,,,,waiting for activation, this may take some time,,,,,"       O2 gave my gf the contract and the new sim card to go into my old iphone 3g which was with O2 previous, O2 have assured us that the phone's imei number is not blocked, they have also said the sim is activated and there is no reason why the phone should not work. the phone is out of date warranty. the sim card does work in other handsets, also my sim from my iphone 3gs does not work in the iphone 3g. i have spent hours litterally on the phone to O2 and now to apple, but because i am out of warranty apple want £25 just to even listen to me over the phone. someone please help me. i am getting very frustrated for hopefully what might be an easy fix for someone. i have done all the resets that are possibly humainly possible, i have done all the resores you can do, have sync'd on many occasions all to come up with the same fault. i am still getting O2 in the top left corner but with no bars and when trying to call it fails imediately. wifi is fine, it works as an ipod.

    ONLY AT&T can legally/legitimately unlock it.  No one else at all.

  • Sony Alpha 7R compatibility with Adobe Photoshop Elements 11 ?

    Hi everyone,
    Who does know if and how I can open the Camera Raw file created by my new Alpha 7R (RAW Sony ARW 2.3 format) from Adobe Photoshop Elements 11 ?
    It does not seem to be the case by the look of the message below, unless there are some tricks for upgrade or whaever...
    I did purchase this PS11 version one year ago when I got the new Sony Alpha STL-A99...
    I had hope they would be compatible....
    What options do I have ?

    Each new camera model requires a separate camera profile so Adobe has to support every camera individually, and the ACR plug-in only gets new camera updates for current versions of Adobe products, which I suspect would be PSE12 in your case, since the camera is new.
    Your official options are buy PSE12 and update to ACR 8.3 or use the DNG Converter 8.3 to convert your ARW files to DNGs which will be compatible with older ACR plug-ins like you have in PSE11.
    The DNG Converter 8.3 is available, here:
    http://www.adobe.com/downloads/updates.html
    Another, unofficial option, that works for some people is that Adobe is still allowing the PSE12 ACR 8.3 plug-in to work with PSE11, if you can figure out how to install it. 
    At least one person has gotten the ACR installer to update their PSE11 to ACR 8.3.  Direct installer links are here, where I’d suggest you try the ACR 8.3 for CS6 link, first, and if that doesn’t work, then try the ACR 8.3 for CC link:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
    If this direct install doesn’t work, then you can still manually install the Camera Raw8.bi file from the setup.zip you download using the above links.  Here are some instructions I wrote up for someone else in a similar situation:
    http://forums.adobe.com/message/5959479#5959479

  • Macbook not compatable with iPhone 4

    I got the iPhone 4 in December, and cannot use it with my Macbook. I need to download the newest version of iTunes-but am still only running Mac OS X 10.4.11. I bought the snow leopard software-but my computer doesn't have enough memory to install it. Trying to figure out where to go from here!

    Installing RAM in a MacBook is very easy. Here's instructions on how to install RAM in your MacBook: http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
    If you have an early 2007 MacBook (Model 2,1) your MacBook can only access 3gb of memory so the the cheapest way to go is one 1gb stick and one 2gb stick. If you have the late 2007 MacBook (Model 3,1) you can use 4gb of RAM. 2 sticks of 2gb RAM.
    I usually check with DealRAM.com or Amazon to get the lowest price.
    DealRAM - http://dealnews.com/memory/prices/systems/Apple-Mac-Book-PC2-5300-DDR2-SODIMMS/4 3938/1GB.html
    AMAZON - http://www.amazon.com/s/ref=nbsb_ss_c_1_11?url=search-alias%3Delectronics&field-keywords=macbookram&sprefix=macbook+ram#/ref=srst?keywords=macbook+PC2-5300+ram&qid=1300819252&rh=n%3A172282%2Ck%3Amacbook+PC2- 5300ram&sort=price

  • Klipsch igroove SXT compatibility with Iphone 4

    I initially could play my music from my phone thru the Klipsch dock-then i upgraded--now i get a message that says this device is not supported by apple---whats up?

    I also set up some test appointments, when it is only scheduled for one day the appointment that was "all day" is listed in the upper portion of the iphone calendar just as it is in outlook; however, when the same appointment is made over more than one day, the iphone version is from 12:00 am - 12:00 am the following day. I run about 6 different calendars so having the all day items stay in the upper section while my 5 other calendars remain in the calendar is very helpful. I use Outlook 2010 at home, and Outlook 2007 at work on the exchange servers. If you all would like to duplicate my test please let me know how it turns out. I will also try this with my other calendars (Gmail) and see if its the same thing.

  • Sony DCR-TRV70 Compatibility with IMovie HD

    When I bought the Sony DV camcorder it was on the comaptible list from Apple. It is not now. With the supplied USB cable my Imac / IMovie HD does not recognize the camera. Has anyone had luck connecting this camcorder to Imovie HD?

    You need to buy a Firewire cable, 4-pin to 6-pin. Sony calls them i.Link. USB is just for stills.

  • Jawbone Prime Compatibility with iPhone 3G

    Does anybody know if the above bluetooth hands-free headset is compatible with the iPhone 3G? I've purchased one and despite successfully pairing it with my iPhone I can't seem to hear anything nor can anybody hear me. The device answers calls, and makes beeps in the earpiece when I answer or turn the volume up but apart from that there's complete silence.
    Please can anybody help?

    It should work fine, try the following:
    Delete the Jawbone's profile from your phone, turn the Bluetooth application in your phone OFF and then perform a reset on the iPhone by holding both the home and sleep buttons at the same time until the screen shows the apple logo, then release. Next, reset the Jawbone. To reset your Jawbone, first power the Jawbone on and make sure it is disconnected from the phone; the LED light will flash red every few seconds when the Jawbone is powered on and disconnected. Next, press the headset's buttons in the following order: NoiseAssassin, Talk, Talk, NoiseAssassin, Talk, Talk. For help locating each button, follow this link: http://aliph.custhelp.com/cgi-bin/aliph.cfg/php/enduser/stdadp.php?p_faqid=124&pcreated=1213119345.
    If the reset is performed successfully, the Jawbone will enter pairing mode (the LED light will begin flashing back and forth between red and white). At this point, turn your phone's Bluetooth ON and ask for it to search for a device. Once the Jawbone is found approve the pairing and connection and when prompted for a passkey enter four zeros (0000). The Jawbone should flash white every few seconds once it is on and connected. (Here's a link that will also help with the pairing process: http://aliph.custhelp.com/cgi-bin/aliph.cfg/php/enduser/stdadp.php?p_faqid=154&pcreated=1242753069)

  • Is a Sony DCR-TRV900 compatable with iMovie 8?

    Does anyone use a DCR-TRV900 (old, but good) video camera with iMovie8?

    Bengt Wärleby wrote:
    .. Asymetrical - Yes but not enough. Did it => Expensive repair to Camera.
    .. you Swedish Vikings are too strong, .. your hands are not made for tiny Japanese products
    SCNR!!

  • Car charger compatability with iphone

    will a regular ipod car charger charge the iphone?

    I use some Griffin brand car charger, I think, and it works great on the iPod...on the iPhone it is less than par for only one reason...the iPhone doesn't realize it is plugged in but it is still getting charged. It keeps kicking battery life down and down, even to the warnings, but once I unplug it and unlock it, it shows the proper charge. Weird I guess but it still charges it nonetheless.

  • Sony HDR-SR12 compatibility with Final Cut Express

    I'am having few drop frames when transfering in FCE. Somebody knows what the settings for tranfering in HD-FH 1080i.
    Thanks

    Wrong forum...try here:
    http://discussions.apple.com/forum.jspa?forumID=936
    Shane

  • Hi. Will the Sony SRS-GU10iP - iPod Speaker Dock. 2Ch 20 Watts. system work with the iPhone 5?

    Hi.
    Not sure where to ask this. Will the Sony SRS-GU10iP - iPod Speaker Dock. 2Ch 20 Watts system work with the iPhone5 or any other types of iPhone5? the iPhone6 or iPhone 6 Plus?
    Thanks.

    Hi there SyncroScales,
    Welcome to Apple Support Communities.
    While I’m not familiar with that specific accessory or its compatibility with iOS devices, the article linked below provides a lot of great information that you may find helpful.
    About iPhone, iPad, and iPod accessories - Apple Support
    Cheers,
    -Jason

  • My iphone 6 will not connect to the sony srs-x5 bluetooth wireless speaker.

    my iphone 6 will not connect to the sony srs-x5 bluetooth wireless speaker.

    There ware some issues with iOS 8, 8.0.1, and 8.0.2, regarding bluetooth. Have you updated to 8.1? Forget the speaker in bluetooth settings, and update. If you are up to 8.1, try to forget the speaker, and reset all settings and attempt to pair again.

Maybe you are looking for

  • Migration key : wrong : while importing

    hello gurus i am importing an export from source system to destination system source system os : HP-UX ver: B 11.23 DB: oracle 9.2.0.6.0 target system os: Win2000 advanced server DB: oracle 9.2.0.6.0 its giving error in migration key it says " The mi

  • Is there any documentation on PHYS-FS for content engine

    I am in process of replacing a fail disk on CE 5.5.11.2 model WAE-7326-K9. The disk currently has PHYS-FS, CDNFS, MEDIAFS and CFS configured. Can someone provide details on PHYS-FS.

  • Other wireless routers

    my airport extreme went dead in less than 2 years. I want to get another wireless router that doesn't cost as much this time seeing as the airport doesn't have any more of a warranty as any other product. What other wireless routers are out there, an

  • Html slider control not working

    Hi, I am working on a extension for which I would need a slider control. But it seems that they are not correctly handled in the latest version of PS CC 2014. The handle is not created (see below, I disable the onLoad method to make sure that is not

  • Problem with NetAuthSysAgent/NetAuthAgent

    I'm fighting second day with the poblem: One of printers I use is "windows via spools".  (printing to SMB printer) Which used to work correctly. Authorization doesn't work anymore. I tried to remove and recreate printer, and cleaned up everything rel