Sony stereo headphones only right tone on when plugged into an ipad
Sony Stereo HeadPhones only Right ear on. The headphones is supported on an ipod(It says on the packing). Can anyone help pls.
THe same thing happened to me. I bought it off a guy who hadn't used it in months- and now All I get is nothing if it's not plugged in....
I'll leave it on overnight.
I should leave it plugged in and off?
-or plugged in and on?
Similar Messages
-
Mouse only works when plugged into a specific USB port
Hello. I'm using a HP optical mouse that connects via USB plugin.
HP PIN: 505062-001 Rev.A
Operating System: Windows 7 Home Premium SP1
It only has full functionality when plugged into a specific USB port on my desktop. I can't get it to work with any other ports or chained with a HUB plugged into the port it likes. All of my other USB devices work fine with those ports and my HUBs. The red light on the bottom lights up but the mouse pointer does not respond to movement and clicking the buttons does nothing either.
1) I'm confident, that it's not a problem with the desktop hardware
2) I'm confident, that it's not a problem with the mouse hardware
When the mouse is fully functional, it's displayed under Devices and Printers, in the Devices category as "USB OPTICAL MOUSE".
When connected with the other ports or through a HUB, it appears as TWO entries in the Devices category: "HID-compliant mouse" and - here's the suspicious part - "HID-compliant keyboard"
I suspect that something's up with the driver for the mouse. Any clues, as to which driver I need? Or, is the cause of the problem something else entirely?Hello Tick_Noby,
Your mouse only works in certain usb ports.
Has the mouse ever worked in the ports?
You can go to device manager and uninstall the fake keyboard and the mouse and restart the computer.
It seems that the driver is not correct for the mouse.
Also reset BIOS defaults.
Turn off the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If it has not been to long since the problem started, you can run a system restore.
This will take the system back to when everything was working correctly without affecting your personal files.
Here is a link on how to do a restore.
Let me know how everything goes
Have a good day. -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
IPhone 4S only powers on when plugged into a wall charger, stuck in bootloop
Today I went to get my phone's screen fixed. At first, the problem was that the phone was rebooting every 3-4 minutes. Then, after it died, it doesn't power on anymore, except when it is plugged into a wall charger. However, it is stuck in a bootloop, where it shows the apple logo for about 7 seconds, then the screen goes black for about 5 seconds, then repeats. I can't unplug it or else the phone goes dead, and plugging it into my computer results in the same deadness. I've tried DFU Mode, Recovery and everything else when plugged into my computer, but it remains dead and black screened. The phone is not picked up at all, it doesn't power on or anything. It only powers on when it is wall charged, but it will bootloop. I can't get past this, and there is no way I can restore it. Help?
Your battery is dead. You will have to replace it see article:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service. -
Help, when plugging into a monitor my MacPro only displays desktop 2. How do I change this?
Try a NVRAM / PRAM reset.
Directions are here:
http://support.apple.com/kb/HT1379
By the way, when you post a question please include specifics about the version of Mac OS X you are running and the Mac model.
It is a Macbook Pro, right, not a MacPro? -
IPhone only turns on when plugged into wall
Hello, I have an iPhone 4 CDMA and it only works when in is plugged into the wall. It does not work properly anyother time. When I plug it into the computer it goes through the Boot Loop. When I put it into DFU mode and recovery mode and try to restore it in iTunes it doesn't restore and just gives me a bunch of different error codes. The most common error codes are 2001, 2006, or 1604. It use to give me Error 21 but I fixed that by editing the hosts files. I have tried six different computers and seven different iPhone cables on the computers and I still get the same error codes every time. It does not work if it is not plugged in. I have replaced the dock connector/charging port and the battery. I bought it used and think it may have been jailbroken at on time. It has not been jailbroken in the time I have had it. I have also tried Tinyumbrella and that did not work. What could be wrong with it?
Hello! When it turns off, do you notice if it drains quickly or does it just shut off even with full battery? Because this can also be caused by battery problems. Your iPhone may not be turning on even when plugged into a computer because a wall outlet charger gives off more power than a computer does.
I suggest you bring your phone to an Apple store right away. They could at least help you determine the problem, and by then, you can decide what to do with your iPhone - you can have it repaired (if they say it's still fixable), you can have it replaced with a refurbished iPhone, or you can buy a new phone completely. -
My Ipod touch will only work when plugged into an Itouch radio. When I take it out of the charger, it goes blank. The battery shows fully charged. It appears that the battery is no longer charging. What should I do?
Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.
-
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port,
Anyone else have this problem?Youngsavage6oo wrote:
I have had my iphone 4s for only a couple months and it was charging fine and I unplugged it and when it got low I plugged it back in and wouldnt charge so I tried plugging it into the computer and its chargeing but I dont know what to do I need help
Its charging, whats the issue then? -
My iPod only works when plugged into a wall socket!
Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
Any ideas??Sounds like a dead battery. You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
B-rock -
Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?
Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can. -
My IPhone works with both the charging USB cable as well as the wall socket and docking station. Additionally, my IPod used to charge using both the wall socket plug in and the docking station. My IPod will stay play music when plugged into the docking station, but won't charge. Further, when I plug my IPod into my computer all it will do is charge and is not recognized by ITunes. I have done both a soft and hard reset.
If the iPhone has no problem with the same cable then
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How to recover music? iPod only works when plugged into wall outlet
My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this?
I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
Any help would be very appreciated!Bump. Is there no way to solve this?
-
BSOD when plugging into Dynadock U3
Hi There,
We have a wide number of Toshiba Dynadock u3.0's working with a number of Sony Vaio Laptops. In the main they have worked pretty well, and have improved over time as new releases have come out.
At the moment we are rolling out the new Sony Vaio Pro laptops, and Dynadock is almost essential for users because the Vaio Pro's do not have an ethernet adapter. We are also downgrading them to Windows 7 from Windows 8 as we are not ready for Windows 8 on a large rollout, and holding off till 8.1 goes live.
We have had a couple of blue screen of deaths on 2 Vaio Pro's when plugging into the Dynadock. Both have the latest dynadock drivers, and we have obtained the memory dump for the machines. Before they were plugged in, they were on the WLAN in the office.
The other half a dozen devices we have in use at the moment have not yet reported this issue, and the BSOD has appeared on these two devices only once each, but I was asked to report this issue on these forums to just confirm there is no obvious issue with the Dynadocks.
In the meantime we have 3 other Vaio pros which are being tested and have not yet experinced the same issue.
Memory Dump below:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Scratch\100813-9796-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`020dc022?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00226022?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.22411.amd64fre.win7sp1_ldr.130801-1934
Machine Name:
Kernel base = 0xfffff800`03263000 PsLoadedModuleList = 0xfffff800`034a76d0
Debug session time: Tue Oct 8 11:46:36.236 2013 (UTC + 1:00)
System Uptime: 0 days 3:57:23.966
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa800672db50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\drivers\DNPFW.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DNPFW.sys
*** ERROR: Module load completed but symbols could not be loaded for DNPFW.sys
Probably caused by : tcpip.sys
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa800672db50, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c3d0
Debugging Details:
DRVPOWERSTATE_SUBCODE: 4
IMAGE_NAME: tcpip.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d78659
MODULE_NAME: tcpip
FAULTING_MODULE: fffff88001800000 tcpip
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
STACK_TEXT:
fffff880`03507ed0 fffff800`032cb972 : fffffa80`0672dc10 fffffa80`0672db50 00000000`00000000 00000000`0000000d : nt!KiSwapContext+0x7a
fffff880`03508010 fffff800`032dcd8f : 00000000`00000001 00000000`00000000 00000000`00000000 fffff880`01801d60 : nt!KiCommitThreadWait+0x1d2
fffff880`035080a0 fffff800`03332ee6 : fffff880`01801d00 fffff880`00000000 00000000`00000000 00000000`00000000 : nt!KeWaitForSingleObject+0x19f
fffff880`03508140 fffff880`0180289a : fffffa80`07609a10 fffffa80`071db1a0 00000000`00000000 fffffa80`000e0082 : nt! ?? ::FNODOBFM::`string'+0x12ef6
fffff880`035081b0 fffff880`0174f375 : fffffa80`0a1cf8d0 fffffa80`00000000 fffff880`03508438 fffffa80`071db1a0 : tcpip!FlUnbindAdapter+0xaa
fffff880`03508280 fffff880`01760adf : fffffa80`071db1a0 00000000`00000000 fffffa80`0a3357c0 00000000`00000000 : ndis!ndisUnbindProtocol+0x205
fffff880`03508390 fffff880`01761c5b : 00000000`00000001 fffffa80`071db1a0 fffff880`03508420 00000000`00000001 : ndis!ndisCloseMiniportBindings+0x2df
fffff880`035084a0 fffff880`016fabc2 : fffffa80`071db1a0 fffffa80`071db1a0 fffffa80`0cecfc10 fffffa80`071db1a0 : ndis!ndisPnPRemoveDevice+0x25b
fffff880`03508640 fffff880`01764dc1 : 00000000`00000000 fffffa80`0cecfc10 00000000`00000000 fffffa80`071db1a0 : ndis!ndisPnPRemoveDeviceEx+0xa2
fffff880`03508680 fffff880`01ba6537 : 00000000`00000300 00000000`00000000 fffff880`03508848 00000000`00000000 : ndis!ndisPnPDispatch+0x862
fffff880`03508720 00000000`00000300 : 00000000`00000000 fffff880`03508848 00000000`00000000 00000000`00000020 : DNPFW+0x9537
fffff880`03508728 00000000`00000000 : fffff880`03508848 00000000`00000000 00000000`00000020 00000000`000007ff : 0x300
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
Followup: MachineOwner
0: kd> lmvm tcpip
start end module name
fffff880`01800000 fffff880`019fe000 tcpip (pdb symbols) c:\symbols\tcpip.pdb\494FAD1F538A4ED5A2BF3CC62A5FFFCB2\tcpip.pdb
Loaded symbol image file: tcpip.sys
Mapped memory image file: c:\symbols\tcpip.sys\51D786591fe000\tcpip.sys
Image path: \SystemRoot\System32\drivers\tcpip.sys
Image name: tcpip.sys
Timestamp: Sat Jul 06 03:52:09 2013 (51D78659)
CheckSum: 001D78AE
ImageSize: 001FE000
File version: 6.1.7601.22378
Product version: 6.1.7601.22378
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: tcpip.sys
OriginalFilename: tcpip.sys
ProductVersion: 6.1.7601.22378
FileVersion: 6.1.7601.22378 (win7sp1_ldr.130705-1532)
FileDescription: TCP/IP Driver
LegalCopyright: © Microsoft Corporation. All rights reserved.Same user, different error, but still a BSOD.
Turning on the laptop when plugged into the dynadock, and he gets a BSOD. I've pasted the bugcheck in below. We are in the process of uninstalling and reinstalling all the drivers, and replacing his dynadock with a known good one to determine if the issue resides with the laptop or not.
* Bugcheck Analysis *
ACPI_BIOS_ERROR (a5)
The ACPI Bios in the system is not fully compliant with the ACPI specification.
The first value indicates where the incompatibility lies:
This bug check covers a great variety of ACPI problems. If a kernel debugger
is attached, use "!analyze -v". This command will analyze the precise problem,
and display whatever information is most useful for debugging the specific
error.
Arguments:
Arg1: 0000000000001000, ACPI_BIOS_USING_OS_MEMORY
ACPI had a fatal error when processing a memory operation region.
The memory operation region tried to map memory that has been
allocated for OS usage.
Arg2: 0000000000000000, The high portion of the physical address of the memory region.
Arg3: 0000000000000ff0, The low portion of the physical address of the memory region.
Arg4: 0000000000000025, The length of memory being mapped.
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA5
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff88000fa330f to fffff8000328cf40
STACK_TEXT:
fffff880`03723a58 fffff880`00fa330f : 00000000`000000a5 00000000`00001000 00000000`00000000 00000000`00000ff0 : nt!KeBugCheckEx
fffff880`03723a60 fffff880`00fa5cfe : 00000000`00000ff0 00000000`00000000 00000000`00000000 fffffa80`07d59000 : ACPI!MapPhysMem+0xcf
fffff880`03723ab0 fffff880`00fae0c0 : fffffa80`07d684f0 fffffa80`07d59000 00000000`00008000 00000000`00000000 : ACPI!OpRegion+0x136
fffff880`03723af0 fffff880`00fa8ac2 : fffffa80`07d59000 00000000`00000000 00000000`00008000 00000000`00000000 : ACPI!ParseTerm+0x17c
fffff880`03723b30 fffff880`00fa61a6 : fffff880`00fb90e0 fffff880`00fb9ac0 fffffa80`0671d740 fffff880`00fb90e0 : ACPI!RunContext+0x86
fffff880`03723b70 fffff880`00fa1054 : fffff880`00fb91e8 fffff880`00fb9ac0 fffffa80`0671d740 fffffa80`099f09a8 : ACPI!StartTimeSlicePassive+0x8a
fffff880`03723ba0 fffff800`0352d6ee : fffffa80`066d0b50 00000000`00000080 00000000`00000001 00000000`00000000 : ACPI!ACPIWorkerThread+0xd8
fffff880`03723c00 fffff800`0327df26 : fffff880`03100180 fffffa80`066d0b50 fffffa80`06748660 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03723c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
ACPI!MapPhysMem+cf
fffff880`00fa330f cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: ACPI!MapPhysMem+cf
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ACPI
IMAGE_NAME: ACPI.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294
FAILURE_BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
Followup: MachineOwner
Maybe you are looking for
-
Lenovo G500 - Can't Use Keys And Touchpad/Buttons At Same Time
Whilst gaming, primary button use for me will be WASD (Directional) and obviously right&left click. The problem I'm getting is that whilst I'm holding one of WASD, then say right click to shoot it doesn't shoot - almost as if the button is locked whi
-
Hi folks.. I just downloaded a strange file extension that my Mac does not recognise. It's meant to be a Jazz Chord dictionary but this is what I got. Any ideas how to open this? Thanks..
-
Is it possible to delete domain?
Hi, The first time I tried creating a domain, my browser had hung. When I later accessed http://mymachine:50000/devinf it gave me an error in the "Show Tracklist" section. I restarted the server and it seemed to have created the domain. However, I
-
Is there a way to increase the visual size of audio in Flash CS6?
Basically, I'm trying to lip sync but I have a problem in that the audio "waves" are so small that I can barely see them, and I use these to base where I should put my lip frame at. So is there a way to increase the visual size of the audio so I can
-
Error converting Photoshop Starter Edition Catalog to PSE8
I have followed instructions on the forum to convert by using the utility within PSE8. I received an error and opened up starter edition and reconnected or deleted files from the catalog. I attempted to convert again and I get a Conversion failed er