Sony TV KDL-60W840B Red LED is blinking 2 times and TV wont turn on

Hi, I have a Sony TV KDL-60W840B which I bought 13 months ago for the world cup soccer (gift for my husand). Now it is not working and like you can read in the subject line once the TV is plugged into a power strip the red led start to blink twice and pause, when I try to turn on it not do it. Please help me because it is not fear that just when the warrenty finished the TV is not working, and in fact I spent $2000 one year ago to have this issue. I really appreciate your help. Ana LuciaAB, Canada.

Hi aluva,
Welcome to the Sony Community!
If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most Red LED blink conditions require service. The meaning of the blink codes differs between TV models,
Please perform reset, visit the website below for the steps and further details.
https://ca.en.kb.sony.com/app/answers/detail/a_id/38403/c/65,67/kw/Perform%20power%20reset/session/L3RpbWUvMTQzODYzMjA0Ny9zaWQvQ1pPczkqc20%3D
Check out the website below for additional troubleshooting steps regarding lights are blinking on the TV.
https://ca.en.kb.sony.com/app/answers/detail/a_id/32192/c/65,67/?icid=home|banner3_ca_en|blinking%20light
If these articles do not resolve the issue, the problem is most likely related to an internal component that must be replaced and service will be required. Begin the procedure to send your Sony product into a Sony facility to be repaired.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

Ipod shuffle 2nd gen blinks 3 times and thats it..

My Ipod worked fine up until 3 days ago when it just descided that my usb was too slow or something?? An error message popped up and then my ipod has never connected with my pc again.
When i pop the shuffle onto the usb dock the red light blinks 3 times and then goes off.
NoIcon in the sstray, no image in the drivers, nothing.
Im at my wits end trying to fix this thing.Can any one help me?!?

There is a procedure in TS1363 that tells how to reset the iPod Service on Windows. Here is the link to TS1363: http://support.apple.com/kb/TS1363
The Reset procedure is the first of several things to do to get the iPod recognized. You should also get the iPod Reset Utility. But to use the utility, you have to get the Windows machine to see the iPod first.
Message was edited by: William White1

IPod Shuffle 2nd Gen, blinks 3 times and stops (Only connected to power outlet))

Its a iPod Shuffle 2nd generation of 1GB. When I connect it to a power outlet via Apple's USB Adapter, it blinks 3 times and then it stops until I reconnect it again (reconnecting leads to the same thing). When I turn it on, it functions normally. I haven't used it in a long time ago, but I connected it a long time to iTunes to pass songs and when I turn it on it'
When I connect it to iTunes, it's the same, but iTunes recognizes it as a non-problem iPod. It even charges connected to iTunes (but it only blinks 3 times after connecting it and it's over, but keeps connected)
I think it even charges with iTunes, i can copy songs and everything. But I don't want to be stuck at a computer every time i need to charge

Hello adrian,
Thank you for contacting Apple Support Communities.
The iPod user guide has a section covering the actions of the status lights. See page 8 in the following guide:
iPod shuffle Features Guide
http://manuals.info.apple.com/MANUALS/0/MA197/en_US/iPod_shuffle_Features_Guide. pdf
Regards,
Jeff D.

My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My Nokia x3 when turned on blinks four times and s...

my Nokia x3 when turned on blinks four times and switch off

Connect the phone to charger & then try to switch on. If it fails remove sim & memory card & try again. Now 2 scenarios-
1. Phone starts – a. Try again with only sim – A. - works – memory card is problem.
B. – Doesn’t work – sim card is problem.
2. Phone doesn’t start even without sim & memory card- You have done all that can be done by a user in your case. Contact the nearest authorized Nokia Care Centre in your area.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

X3-00 blinks 4 times and wont turn on

Can someone please help me
I turned off my phone and it turned off phone and then went to turn it back on and the screen blinked 4 times and then nothing.
I have tried taking the battery out and pluging it in - but nothing

if you just have recently purchased this within the last 14 days you should be able to get it replace in store,if not as advised above a nokia care center would be the next place to go
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HP 8510p laptop won't power up, lighting bolt light blinks six times and off.

HP 8510p laptop won't power up, lighting bolt light blinks six times and off.
Blank/black screen, fan/disk not moving. Nothing happen other than the light blinks and off.
Same problem for battery powered; battery + power adaptor or power adaptor only.

Hello tianhuat. I understand you're having some problems getting your notebook to power up. Try the following.
Remove the battery and AC power from the notebook.
Press and hold the power button for 20-30 seconds. This discharges the capacitors on the motherboard.
Replace battery and AC power.
Try to boot the notebook and post the result.
Are you also getting a blinking CAPS LOCK or NUM LOCK pattern?
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Yoga 2 13" Dead? Battery light blinks 3 times but will not turn on.

Just purchased a Lenovo Yoga 2 13" about 3 weeks ago. I like the PC, but I have an issue. I was using it last night and I shut it down and left it to charge. Today when I went to turn it on the battery light blinks 3 times (1 second on, 1 second off x 3) and that's it. It won't boot at all. Have tried holding the power button for 3 - 30 seconds and pressing the reset button but all I get is the 3 blinks of the battery light (no power button light at all). Is there anything I can do? Hard reset button combo or anything like that to try? Thanks.

I'm having the EXACT same problem! The light blinks 3 times and the holding of the power button will not work either. My laptop said the battery was dying and was at 10% and before I could figure out why it wasn't charging, it died completely and the power cord will not charge it any more for some reason. I have only had this laptop for 6 months! And I replaced my old laptop (Yoga 13 original because of charging problems too!) I'm so upset about this. I will NEVER buy another Yoga/Lenovo.

Q10 wont turn on. Red LED 1101111 blinking.

Hi All,
Just updated my Q10 to 10.3 via the carrier update and after half a day my phone turned off and now it wont turn back on again.
When I press the power button the yellow LED comes on and after that the red LED blinks in the following sequence 1101111.
Tried all the usual tricks. Battery pull, plugged phone in without battery, plugged into blackberry link, used original charger/cable, hold power button down for 10 seconds etc...All don't work.
Any ideas would be much appriciated

Hi and Welcome to the Community!
I cannot quite tell if you have done exactly this or not...apologies in advance if you have. Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
It is also possible that the OS update caused this. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sony Xperia M2 flashing Red LED light and wont turn on.

Okay so i have been having this problem for about a week.I tried turning on my phone the other day but it wasnt doing that so i thought maybe it ran out of battery then i let i charge for a couple of hours and left it untouched.When i came back my phone was flashing a red light and the sony logo would apear and my phone would vibrate but then it would shut down again.This has been happening for all week i let it charge overnight but still the same thing happens flashing red and vibrating.Sometimes the light dosent flash and i can turn my phone on for a while but i never know when it could randomly shut down.i tried using the Pc companion program to try and fix it but my phone wont stay on for long enough for it to be able to do that.Any tips on what i could do ? the last thing i wanna do right now is call sony so please if you know any possible way of fixing this let me know

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to power on the phone without SIM- and/or SD-card to see if this can help? Otherwise, a software repair via PC Companion would be recommeded:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. When you are going to connect the phone, the phone should be completely off. Hold the ON/OFF button + volume up(+) for 10 seconds.

BH-503 green/red leds on at same time

Hello folks!!!
eraly december I bought an Nokia BH-503 over internet. The device arrived perfectly, but 2 days ago it just "bricked".
I was trying to pair it to my iPhone and then both red and green leds lighted up... I did try to turn the device off several times, holding every single key for some extra seconds... none worked.. I did try to plug it to charger and hold multi-key + volume up, no results at all...
After 2 days these two little fellows still on and shinning... and I cant even turn the device off...
Any idea what I could do?
Cheers

forget it folks.
after 4 days with the leds on, it went off and after recharge the device came back to life
Cheers

HP Pavilion DV3 ( Scroll & Caps Lock LED's blinking four times + Blank Screen )

Hi,
I have an HP Pavilion DV3-2157cl
When I press the power button, the screen remains blank. Also, the scroll & the Caps Lock buttons keep blinking four times.
Sometimes, the laptop works like nothing's wrong but Most of the time, it remains blank with the blinking lights!
Can anyone help me?

i had a problem with my dv3 (blank screen keeps flashing) and used this method to reflow the graphics card/chip (see link below). only try this method if you are at your wits end... and you are skilled with taking apart/putting together electronics. it will take you a minimum of 1 hour (but most likely, about 2). you will need a heat gun (about $10 - $20).
http://www.youtube.com/watch?v=SziIr34Md0g
to prevent it from continually over heating, you can try the penny mod (google it). that's what i did. you basically take a penny and sand off both sides until it is the right thickness and solder it onto the heatsink. you'll need to remove the sticky blue foam that HP used instead.
i also noticed that a laptop cooler placed under your laptop works well for keeping it cool. it can be fixed again and again using the method above but it is time consuming. to prevent getting a cold connection which leads to this problem, don't move the laptop. yes, it sucks that you can't move it but that's the only option you have.

Powe Mac G5 early 2004 gives error (no memory installed) Do I need to replace the Logic Board. Machine powers up,2beeps and power lights blinks 2 times and stops there, No video or any thing?

I just recently aquired a Power Mac G5 early 2004.
When I power the system up. I get 2 beeps
and the small front panel light blinks 2 times continuously.
The error codes show that it means a memory problem or
no memory present. Memory is installed.
In this case do I need to replace the mother board.
The system goes no futher, no video or any thing.

Well, it's possible that someone pulled the original RAM from the computer before they sold it, and repalced it with incompatible RAM. That, believe it of not, would be the best of all world in this case, as a working G5 logic board and its installation could cost as much as a refurbed Intel mac.
I would contact the seller if you did not personally see the computer working before you bought it.
As the computer had to be moved about--possibly shipped--to change hands, first check that all internal cards and RAM Modules are fully seated. They can work loose in some models.

Phone wont turn on, when plugged in holds a solid red led or blinks very fast twice

SO my phone isn't turning on... i have tried to reload it on the pc but that hasn't worked. I have tried all the tricks from other similiar posts... any idea whats wrong with my z10?

come on people, surely someone knows how to bring life back to my phone

My Sony Ps3 Bluetooth Has A Red Ring And It Wont Turn On Ive Tried Multiple Wayss Tp Turn It On.

My Bluetooth Just Wont Turn On And It Doesnt Have A RESET Button
Solved!
Go to Solution.

PlayStation has a separate community which can be found here. Please visit it for further assistance. Thanks!
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/LapMagWin

Sony TV KDL-60W840B Red LED is blinking 2 times and TV wont turn on

Similar Messages

Maybe you are looking for