Sony Vaio VGC-V3M or V3S vs DVD burning

I would like to buy a Sony Vaio desktop probably the VGC-V3M.On my current Dell Inspiron laptop I was unable to burn DVDs to back up iTunes so had to do it on Cd's-15 in all! and I want to be certain that the Sony VGC-V3M or V3S will do it to DVDs.
Does anyone have one of these computers and been able to burn DVDs succesfully?
thanks
Jonathan

Sadly, we see a number of problems that are unique to the VAIO.
Sony is notorious for rewriting the operating system to fit their needs. Still, you'd think, if Premiere Elements came bundled with it, it would at least work with the system.
I highly recommend manually updating the operating system and firmware (these things become outdated weekly, and outdated firmware can really wreak havoc on your machine), clearing off the junkware, optimizing Vista and making sure you have the latest version of Quicktime and, if you're using Premiere Elements 3, that you have installed the 3.02 patch. These links to the FAQ library at the top of this forum will show you how.
http://www.adobeforums.com/webx/.3bc43f9a
http://www.adobeforums.com/webx/.3bc448a7
http://www.adobeforums.com/webx/.3c057647
And, if all that fails, it might well be worth a call to Sony, since they supposedly built and tested their machine and software before they sold it.

Similar Messages

Sony Vaio Laptop Won't Turn On

I have a Sony Vaio laptop that turns off every time I turn it on. I have taken it in for repairs and they can't that nothing is wrong with it and they can turn it on. They even run diagnostics and have opened it up and can't find a problem. I did update the computer from Windows 7 to 8 but the problem was happening even before I updated it. At first, it would turn off then I would be able to immediately turn it back on, then it would turn off and I would have to wait a few minutes and it could turn it back on. Now, it won't be anything. I know it does work because it was on when I got it back from the repair shop. Any help would be greatly appreciated. I am getting very frustrated!

Check if the DC jack is loose or damaged within the computer.
Remove media from the CD/DVD drive.
Disconnect all external devices that are connected to the computer.
Connect the AC adapter into a known working AC outlet and to the DC jack on the notebook, and then attempt to turn on the computer normally.
NOTES:
Verify the correct Sony AC adapter is being used, and not a third-party replacement AC adapter.
Connect the AC adapter directly to a wall outlet and not to a surge protector or extension cord.
Some AC adapters have a POWER LED indicator and can be confirmed as receiving power by ensuring the LED is lit. If the AC adapter is damaged, or the LED is not lit or continuously flickers when plugged into a working AC outlet, the adapter must be replaced.
Disconnect the AC power adapter, remove the battery, and then press and hold the Power Switch for 5 seconds. Once that has been done, connect the AC power adapter again, and then attempt to turn on the computer normally without the battery installed.
NOTE: If the computer turns on without the battery, the battery is either completely drained or defective. Put the battery back in, reconnect the AC adapter and charge the battery for 24 hours. If the issue still occurs, that battery is the problem and will need to be replaced.
Remove any additional Random Access Memory (RAM) that may have been added to the computer.
NOTE: If removing the added RAM memory resolves the issue, check the computer specifications to ensure the memory modules meet the minimum requirements. If they do, the modules themselves may be defective.
Attempt to turn the computer on.
***We also have a YouTube video that walks you through these steps: http://goo.gl/Kl8lD
If my post answers your question, please mark it as "Accept as Solution"

Can IInstall OS X Snow leopard on my Sony VAIO E-series?

I just recently well literally today got delivered my OS X Snow leopard installation disk and I was wondering is there a way to install Snow leopard on my Sony VAIO E series SVE1512K1EB because I want to make a hackintosh :3 Now I know Apple is against this an all but I just would like to experiment. when I openthis up I only see this (see photo below)
Now as you can see from the pic I it says bootcamp and stuff and the setup application did nothing to be honest. Have I actually bought the
official Snow leopard OS because the DVD only
says 800Mb which is nothing and a mac OS is
normally 5GB. Can I have some help? because
Miscrosoft support said come here lol and I really want to install this cool OS on my partitioned HDD
specially named Snow leopard lol. I have tried fooling around with the BIOS and I have restarted and seen if the PC said "do you want to install..." but no luck and the disk drive does rev up like something is going one but nothing. Can some one please just help me? :3
Here is another picture of my laptop and the OS ontop.

No, there is no way to do this. OS X drivers will not be compatible, and it violates the OS X license.
This is an Apple site, so we will not help you with hackintoshes. You need to seek help elsewhere.

Sony Vaio is lately getting disconnected off the 5GHz spectrum

Nothing changed has changed with the setup. I'm using an Airport Extreme Dual-Band to connect a few devices including a Power Mac G5 and HP MediaSmart server both via wired ethernet, two iPhones via the 2.4GHz wireless band, and a Sony Vaio laptop via the 5GHz band.
Only today the Sony Vaio has been losing LAN connection. All other devices connected to the Airport Extreme is not exhibiting any problems. It's only the 5GHz portion that has a problem in connecting to the network in general.
I restart the Vaio laptop and the connection is great again. Then after a few minutes no LAN. The server is lost. Internet connection is lost. Only cure is to switch down to 2.4GHz for a steady connection.
How can I diagnose if it's the Vaio laptop or the Airport that's defective in the 5GHz range?

Check if the DC jack is loose or damaged within the computer.
Remove media from the CD/DVD drive.
Disconnect all external devices that are connected to the computer.
Connect the AC adapter into a known working AC outlet and to the DC jack on the notebook, and then attempt to turn on the computer normally.
NOTES:
Verify the correct Sony AC adapter is being used, and not a third-party replacement AC adapter.
Connect the AC adapter directly to a wall outlet and not to a surge protector or extension cord.
Some AC adapters have a POWER LED indicator and can be confirmed as receiving power by ensuring the LED is lit. If the AC adapter is damaged, or the LED is not lit or continuously flickers when plugged into a working AC outlet, the adapter must be replaced.
Disconnect the AC power adapter, remove the battery, and then press and hold the Power Switch for 5 seconds. Once that has been done, connect the AC power adapter again, and then attempt to turn on the computer normally without the battery installed.
NOTE: If the computer turns on without the battery, the battery is either completely drained or defective. Put the battery back in, reconnect the AC adapter and charge the battery for 24 hours. If the issue still occurs, that battery is the problem and will need to be replaced.
Remove any additional Random Access Memory (RAM) that may have been added to the computer.
NOTE: If removing the added RAM memory resolves the issue, check the computer specifications to ensure the memory modules meet the minimum requirements. If they do, the modules themselves may be defective.
Attempt to turn the computer on.
***We also have a YouTube video that walks you through these steps: http://goo.gl/Kl8lD
If my post answers your question, please mark it as "Accept as Solution"

My Sony VAIO SVE14AA12U disk button sometimes doesnt work

My Sony VAIO SVE14AA12U disk button sometimes doesnt work and when it finally works it sometimes fails to read my disks.I unistalled the driver and after reboot I click the button and it worked, but when added a disk it jut dont read it. I´ve tried all type of disks new, burned, music and sometimes it reads them, but I got to open the tray with a pin. Please help!

Hi bellaybes,
Thank you for visiting Sony Community!
I am sorry to hear this kind of issue. Is the DVD/CD drive icon missing? Please follow the steps here to isolate your issue:
Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds -> you may use a safety pin if you see a pinhole.
Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS, go to Exit tab -> select Get default values -> Save the changes and Exit.
Run Troubleshooter - Start -> type Troubleshoot (or simply search for Troubleshoot for Win8/8.1) -> Under Hardware and Sound, select Configure a device -> follow the on-screen instructions.
Run Vaio update and Windows update
The model name SVE14AA12U is possibly just the chassis number or this is not a U.S. model.
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Best regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

8.1.7 Installation Problem on Pentium IV Sony VAIO PCV-RX651 with XP Operating System

Have problem installing Oracle 8i Enterprise Edition on a SONY VAIO with XP Personal Edition. The "Explore CD" and "Browse Documents" buttons of the Oracle Universal Installer/Autorun responded but the "Install/DeInstall Products" button did not. Oracle 8i DB from the same CD was installed and ran just fine on a Pentium III Toshiba laptop with Win2000 ?! Please help.
Thanks.
CNguyen
[email protected]

================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

TS3212 cant download itunes on sony vaio windows 8

I need help please
I purchased a sony vaio a few weeks ago with windows 8 now i cant seem to get my itunes to either download or to work
I initially installed itunes before i activated my norton internet security and i was able to get itunes to download and play music no bother but then when i plugged my iPhone 5 in to sync to the new computer it ended up having a few problems
1. it either said that it couldnt sync due to an error code 0xE8004002
2. it said it couldnt read my iphone and to restore to factory settings
on the first problem i just ejected the iphone and did a reboot and i reboot the computer also but then when i connected again i then got the second error
so i backed everything up on icloud that i could and then tried to restore to factory settings but then another error came up saying that due to an unknown error i could not restore the iphone
i looked at forums and i saw that i should just manually restore from the iphone itself which i did but then icloud lost have my notes that i had but itunes recognised the phone and sync did start but then half way through said that songs could not be snyc'd due to an error and then all my music was greyed out and i couldnt play it
Then i had to begin again with all the errors of not connecting
i then read more forums and was advised to delete itunes then reinstall again. I uninstalled but now i cant get it to reinstall again. Internet explorer keeps saying download interupted when i get to 99% and it will not go any further and google chrome says pc doesnt allow download check internet settings
please help because im about going barmy with this
thanks

got it to download thanks very much

How can I get my mail to open and read documents in Firefox after upgrading to Sony Vaio Gatew 2.4.0

I upgraded my Sony Vaio Gate software to 2.4.0.06210 on Wednesday night. Afterwards, my mail functionality is not working with Firefox. It will work with Internet Explorer, but not with Firefox when I try to do the following such as clicking on check mail, open inbox or trying to open any views or documents.
It will not open, but only states trying to load and indicates the following:unknown property text flow - declaration dropped and it is referencing my mail server in trying to read data from it. However, if I right click and clikd on a new tab it will read in the data and then if i open a new tab again it will open the document. It's not able to stack the data and hold it properly now for some reason. What do I need to do to get it to work with Firefox? Thanks. edit
Error: uncaught exception: [Exception... "Component returned failure code: 0x805e0006 [nsIXMLHttpRequest.open]" nsresult: "0x805e0006 (<unknown>)" location: "JS frame :: http://mail.yimg.com/d/combo?/mg/12_0_0/js/yui_utils.js&/mg/12_0_0/js/core.js&bc/bc_2.0.4.js&/mg/12_0_0/js/darla.js&/mg/12_0_0/js/async.js&/ult/ylc_1.9.js&/mg/12_0_0/js/imboot.js&/gx/t12a/js/yui_loader_mg/ba87c64b1f20e3e7898b0dc28b2173a6_1.js&/gx/t12a/js/combo/init/us/5d97332c6924d7b42d469dc77113ac15_1.js&/gx/t12a/js/combo/init/us/ycw.v5b.js :: <TOP_LEVEL> :: line 3" data: no]

Hi Rick,
do you mean I could get a direct download link to After Effects 11.0.4? So I don't have to run this patch that never seems to work?
Hard to believe all the Adobe tech support guys I've spoken to wouldn't have mentioned that, I've spent hours and hours on the phone already....
I will try!
thank you

[SOLVED]Custom DSDT not loading - OEM battery doesn't work - Sony Vaio

EDITING ORIGINAL POST TO POST SOLUTION so I don't do a massive bump
Installed windows and ran the BIOS flasher that came with the battery. Didn't work until I changed a line in the plaintext configuration file (config.ini or something) it comes with. Changed "Capacity: 20" to "Capacity: -10". This changed the battery charge requirement from 20% to negative ten percent (any negative number will do), allowing the program to run and flash the BIOS. Didn't realize I could do that, but it fixed the problem 100%.
#### BEGIN ORIGINAL POST: ################################
Hey guys,
I'm a bit of a linux noob, but I've spent many hours this week trying to fix this issue on my own and have learned a lot about making custom kernels, hardware stuff, ACPI, and ABS. However, nothing I've done has worked and I've hit a wall. For reference, I'm on a Sony Vaio VGN-FZ4000 with linux-3.0 base kernel, gnome3/gdm. The battery is made in china and doesn't list a manufacturer, just model number BPS8, 52000mAh.
[Backstory]
So I recently got an OEM battery to replace the broken original, which hasn't worked since before I installed arch (though it worked with an Arch install I did a couple years ago). When I first plugged it in, the gnome battery symbol popped up listing the battery at 0% with an exclamation icon. I unplugged from AC power and the laptop still ran, but the battery monitor just said it was at 0% and 'Estimating' remaining time. I figured this was a glitch with gnome or just because it was this battery's first cycle so I let it run down until it hard-crashed. Then I plugged back into AC and tried to turn on the computer, but it wouldn't do anything until I removed the battery.
Looking into the problem I discovered this was due to the ACPI firmware table DSDT being compiled for Windows, which has, shall we say, fewer restrictions on sanity than the Intel ASL compiler used for UNIX systems. Sure enough I extracted /sys/firmware/acpi/tables/DSDT to find that its section about the battery contained the entry 'Zero' for Battery Technology, which translates to "non-rechargeable", rather than 'One', which makes it chargeable. acpitool confirmed this; my system thought the battery was non-rechargeable and was constantly discharging it. Needless to say I've only been putting it in temporarily to test solutions since.
[/backstory]
[tl;dr] DSDT firmware contains malformed battery description, now I can't get my system to run with a custom DSDT. [/tl;dr]
Attempted solutions:
[1]
Extract, modify, recompile DSDT and include it with the kernel compilation .config options
CONIFG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/usr/src/custom_dsdt.hex
CONIFG_STANDALONE=n
as suggested here, a page linked to by the arch wiki page on DSDT.
I followed the instructions but no matter what this has generated errors during the kernel compilation, sometimes due to every line containing unexpected \231 (or other numbers) characters, sometimes finding some error in the DSDT file and then claiming that the driver it was compiling (ol.c somewhere in the drivers/acpi section I believe) had references to undefined functions all over the place. I CANNOT compile with a custom DSDT specified.
[2]
Place recompiled DSDT in /lib/initcpio/custom.dsdt and add 'dsdt' to the HOOKS in mkinitcpio (and rebuild the initramfs-linux-*.img, of course). Another version of this included recompiling the kernel with CONFIG_STANDALONE disabled.
In neither of these situations has the running DSDT ever been anything but the BIOS-supplied one and not once has the battery shown any different behavior.
acpitool and $ cat /proc/acpi/battery/BAT0/info have consistently claimed the information specified in the BIOS-supplied DSDT; the battery is non-rechargeable and is discharging at an unknown rate. Sometimes acpi will even report that the battery has zero capacity.
The arch wiki does say mkinitcpio doesn't support the dsdt hook as of 2.6.30, but [1] didn't work either and mkinitcpio -H dsdt still told me to try this so I did.
[3]
The final solution I have tried has been to do [2] but to recompile the kernel with the legacy support for battery and ac adapter stuff disabled. I tried this because it was suggested in the kernel.log;
Sep 13 11:51:03 localhost kernel: [ 11.740059] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Sep 13 11:51:03 localhost kernel: [ 11.753434] ACPI: AC Adapter [ADP1] (on-line)
The corresponding line now reads
ACPI: AC Adapter [ADP1] (on-line)
(The same goes for the battery BAT0)
but all this does is remove the battery/ and adp1/ folders from /proc/acpi/ and break acpitool functionality. The log still doesn't mention the dsdt hook, either.
[4]
The old way to do this was to use the acpi-dsdt-initrd-patch-* patch, but that hasn't been updated for modern kernels, presumably because of the new "functionality" from mkiniticpio. The current kernel .config doesn't include any options for ACPI initrd/initramfs support or reading a DSDT from initramfs, which is the functionality provided by this patch.
This covers all the methods I've been able to find on the internet and I'm at a loss for what to do. Am I doing something wrong in [1]? Under what conditions will the compiler fail/succeed with a CONFIG_ACPI_CUSTOM_DSDT_FILE?
When I recompile I fix the 'Zero' definition and a couple compiler errors and warnings. The errors come from section length definitions, which read as 0x00000000 rather than the appropriate max-min value so I fix those, and the warnings come from _T_* methods belonging to the compiler, so I refactor the code to remove the initial underscores. The last warning comes from an isolated And statement that's within brackets (compiler complains it doesn't do anything), but if I remove that the compiler fails hard.
Thanks to anyone who's read this far. Please let me know if you have any ideas how to get my system to use a customized DSDT.
Last edited by paraffin (2011-09-29 23:20:30)

Thanks for the offer, Radioactive man However, I'm actually compiling a customized kernel with the linux-ck and -sony patches, so your packages won't help. (The custom kernel works fine and I've tested this battery behavior on the the regular, -ck, and -sony kernels as well)
Anyway, so I tried another compile with
CONFIG_PREVENT_FIRMWARE_BUILD=n in addition to the options listed in [1] and that time it compiled.
Unfortunately it still didn't load the DSDT!
I did catch a quick little error message that turned up in kernel.log though;
/var/log/kernel.log:Sep 15 11:50:24 localhost kernel: [ 0.925780] acerhdf: unknown (unsupported) BIOS version Sony Corporation/VGN-FZ4000E/R2110J7, please report, aborting!
acerhdf is a fan controller module for the Aspire One, and perhaps I left that in the kernel config and it's preventing the custom DSDT from loading, even though the acerhdf module never gets loaded itself, nor is it in my rc.conf or anything else... If that was the cause of all this, I'm gonna be angry...
Anyway, this message does not appear with my latest kernel build because I took off the custom DSDT option, hoping to be able to use ACPI_CUSTOM_METHOD=y, which supposedly allows one to inject a custom AML method into a debug fs. It wouldn't have worked anyway, as it doesn't let you modify Device sections, but even with a dummy method insertion it didn't give my root modification privileges as it was supposed to...
Will try recompiling AGAIN with this CONFIG_ACERHDF=n (it's simply 'not set' in my current .config), while also enabling the custom kernel etc. If this doesn't work I have no idea what I'll do.
Anyway, thanks for your help and time:

Hi, I just got an Apple Thunderbolt Display. How can I connect it to my sony vaio pc? Thanks

Hi, I just got an Apple Thunderbolt Display. How can I connect it to my sony vaio pc? At Apple Store they gave me a Mini Display Port to VGA Adapter, but monitor doesnt display any image. Thanks for your help!

no, your computer needs to have thunderbolt technology. does it?
if not, no adapter can make a thunderbolt display work on a non-thunderbolt computer.
someone was likely confused since miniDP will FIT into a TB socket but is only compatible one way, ie a mDP display can work on a TB machine, but a TB display cannot work on a mDP machine

How do i download my itunes to my new sony vaio. My original laptop no longer works so am unable to switch it on which is where my original itunes account was setup. i have downloaded my itunes to my iphone and ipad with no problem

Why wont me itunes downlaod to my new sony vaio?
i follow all of the steps and have managed to get my itunes onto my ipad and iphone but for some reason nothing appears on the vaio. My original laptop is broken and will no longer switch on which is where my account was originally set up. I dont really understand icloud. i thought everything was stored there so dont understand why this is happening Can anyone help please?

What exactly is the problem that you are having ? Is it with downloading the iTunes program itself, or redownloading your purchases ?
If iTunes itself then you can download it from here : http://www.apple.com/itunes/download/
If it doesn't download then have you tried a different browser, and/or tried changing the settings on the browser that you are using e.g. turn off 'pop-up blocker' ?
If you've installed iTunes and want to download your past purchases, then what you can redownload depends upon what country that you are in, and whether the items are still in your country's store. What you can redownload will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage :
But ideally you'd have your own backup copy of all your downloads/library (and not relying on redownloading), a song/album etc could be removed from the store at any time.
If you will be syncing your iPad and iPhone to that computer then you may also find this page useful : https://discussions.apple.com/docs/DOC-3141

Sony Vaio FZ Series - LCD brightness

Hi All,
I have recently bought a Sony VAIO FZ11S and I've successfully installed Archlinux:
Fully working:
- CPU Scaling (using cpudyn)
- Multimedia keys (mute, volume up/down, play/stop, etc. using Xmodmap)
- Wireless (using iwl3945. Can't connect with AP with hidden SSID)
- Nvidia GeForce 8400M (using latest nvidia drivers with stock arch kernel 2.6.23)
- Audio (after adding 'options snd-hda-intel model=vaio' to /etc/modprobe.conf. MIC not tested yet)
Untested:
- bluetooth
- SD/MS card reader
- Video camera
NOT WORKING:
- LCD brightness adjustment: FN+F5/F6 are detected correctly by acpid but nothing happens. I'm using the module sony-laptop included with kernel 2.6. Folder /sys/class/backlight is empty. I can use nvidia-settings to change COLOR BRIGHTNESS but this is NOT a good solution IMHO. I'd like to get the same capabilities I get running Windows Vista. (change LCD backlight).
I've read somewhere it is a problem common to all laptop with the same NVIDIA videocard. Does anyone know a fix for this? I've also tried with latest nvidia beta drivers with no success.
- Hibernate/suspend. I tried with pm-tools to suspend/hibernate laptop but nothing is working correctly. I didn't investigate further. Has anyone got a quick solution for this?
lspci output:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GT (rev a1)
06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16)
09:03.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
09:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
09:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
Please help
V.
Last edited by Vins (2007-12-09 11:37:08)

I recently bought a Sony FZ180, almost identical stats and hardware.
I tried all the same suggestions, which worked fine on my old laptop, but will not for this one. If anyone can think of another method to control the backlight I would be grateful.
Also, I tested the SD slot, the TI driver recognizes when a card is inserted, but no devices or mount-points are created.
tifm_core: MMC/SD card detected in socket 0:1
tifm0 : demand removing card from socket 0:1
(The second line is from me removing the card, not a defective slot.)
Everything else works great, though. Arch boots to a full KDE desktop much, much faster than my cleaned-up vista partition. I'm really happy overall.

¿Problems with Windows Vista or Sony Vaio?

Hello everyone
I have a Cisco 2100 WLC with two Access Points 1130, with two WLAN networks, one with WPA2 and the other with Web-Authentication. The two networks works correctly, but I have a client, a Sony Vaio with Windows Vista, which usually give problems, disconnects, and when you try to reconnect, you can not.
When this happens, in the WLC appears the error "Decrypt errors Occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b / g interface of AP xx:xx:xx:xx:xx:xx" .
Sometimes several times to restart the laptop, reconnect. The network card is an Intel 5100, anyone know if there is any inconsistency between this card and Cisco AP? Or is it a matter of O.S.?
I have no other Windows Vista client to verify, the other clients are Windows XP and 7. I have tried reinstalling different drivers on the laptop and not the solution.
Thanks

Hi Carlos,
Make sure that:
1. you are running latest driver from intel on your laptop
2. use only AES encryption with WPA2. If TKIP is also selected. Uncheck it and leave only AES.
Cheers
Serge

Sony DVD Burner and 350 mhz AGP not being recognised by iTunes

I managed to get a Sony DVD Burner for my friends Powermac g4 AGP, the sales assistant sais it would be comatible for macs....it installed fine and wa sable to read dvd's perfectly, when my friend went to burn a CD from iTunes it would not work as it seems the drive is not supported. I have tried finidng some drivers all over the sony website for it but to no avail. I don't suppose anyone has any experience with this brand of burner? Any help would be appreciated thanks.

As I recall, Sony's internal DVD burners are made by Lite-On, but as far as the G4 is concerned - the drive's firmware indicates a Sony product. A compatibilty problem for burning a disk occurs, when the CD/DVD drive is newer than the supporting profiles for Apple's Disk Burner software. Have you checked into "PatchBurn?" Other than that, your friend could purchase Roxio's "Toast," which has more user settings than Apple's software.

Mini no longer detecting Sony firewire DL dvd burner

Hello,
I picked up an external sony dvd burner for cheap and it worked fine for quite some time. My mini only has a cd burner so it was a perfect solution.
I was using Toast with it just fine.
Out of no where my mini does not pick it up at all. I know the drive works as I've plugged it in via firewire to my G4 ibook.
System profiler shows under FireWire "firewire bus" and the rest is blank. Could it be my port is gone? I dont think I ever plugged that firewire cable out untill i tried figuring out what was going on.
Any help would be great.

Hi
I had a very similar problem. My Mini G4 did not mount any externaal device, Firewire or USB, nor even the in-built CD Drive.
It is now away for repair awaiting a new motherboard (I am told).
Hope yours turns out to be a simpler remedy.
David

Sony Vaio VGC-V3M or V3S vs DVD burning

Similar Messages

Maybe you are looking for